| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # PHY Layer Configuration |
| # |
| |
| config PHYLINK |
| tristate |
| depends on NETDEVICES |
| select PHYLIB |
| select SWPHY |
| help |
| PHYlink models the link between the PHY and MAC, allowing fixed |
| configuration links, PHYs, and Serdes links with MAC level |
| autonegotiation modes. |
| |
| menuconfig PHYLIB |
| tristate "PHY Device support and infrastructure" |
| depends on NETDEVICES |
| select MDIO_DEVICE |
| select MDIO_DEVRES |
| help |
| Ethernet controllers are usually attached to PHY |
| devices. This option provides infrastructure for |
| managing PHY devices. |
| |
| if PHYLIB |
| |
| config SWPHY |
| bool |
| |
| config LED_TRIGGER_PHY |
| bool "Support LED triggers for tracking link state" |
| depends on LEDS_TRIGGERS |
| help |
| Adds support for a set of LED trigger events per-PHY. Link |
| state change will trigger the events, for consumption by an |
| LED class driver. There are triggers for each link speed currently |
| supported by the PHY and also a one common "link" trigger as a |
| logical-or of all the link speed ones. |
| All these triggers are named according to the following pattern: |
| <mii bus id>:<phy>:<speed> |
| |
| Where speed is in the form: |
| <Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link |
| for any speed known to the PHY. |
| |
| |
| config FIXED_PHY |
| tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs" |
| depends on PHYLIB |
| select SWPHY |
| help |
| Adds the platform "fixed" MDIO Bus to cover the boards that use |
| PHYs that are not connected to the real MDIO bus. |
| |
| Currently tested with mpc866ads and mpc8349e-mitx. |
| |
| config SFP |
| tristate "SFP cage support" |
| depends on I2C && PHYLINK |
| depends on HWMON || HWMON=n |
| select MDIO_I2C |
| |
| comment "MII PHY device drivers" |
| |
| config AMD_PHY |
| tristate "AMD PHYs" |
| help |
| Currently supports the am79c874 |
| |
| config MESON_GXL_PHY |
| tristate "Amlogic Meson GXL Internal PHY" |
| depends on ARCH_MESON || COMPILE_TEST |
| help |
| Currently has a driver for the Amlogic Meson GXL Internal PHY |
| |
| config ADIN_PHY |
| tristate "Analog Devices Industrial Ethernet PHYs" |
| help |
| Adds support for the Analog Devices Industrial Ethernet PHYs. |
| Currently supports the: |
| - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY |
| - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit |
| Ethernet PHY |
| |
| config AQUANTIA_PHY |
| tristate "Aquantia PHYs" |
| help |
| Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405 |
| |
| config AX88796B_PHY |
| tristate "Asix PHYs" |
| help |
| Currently supports the Asix Electronics PHY found in the X-Surf 100 |
| AX88796B package. |
| |
| config BROADCOM_PHY |
| tristate "Broadcom 54XX PHYs" |
| select BCM_NET_PHYLIB |
| help |
| Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, |
| BCM5481, BCM54810 and BCM5482 PHYs. |
| |
| config BCM54140_PHY |
| tristate "Broadcom BCM54140 PHY" |
| depends on PHYLIB |
| depends on HWMON || HWMON=n |
| select BCM_NET_PHYLIB |
| help |
| Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY. |
| |
| This driver also supports the hardware monitoring of this PHY and |
| exposes voltage and temperature sensors. |
| |
| config BCM63XX_PHY |
| tristate "Broadcom 63xx SOCs internal PHY" |
| depends on BCM63XX || COMPILE_TEST |
| select BCM_NET_PHYLIB |
| help |
| Currently supports the 6348 and 6358 PHYs. |
| |
| config BCM7XXX_PHY |
| tristate "Broadcom 7xxx SOCs internal PHYs" |
| select BCM_NET_PHYLIB |
| help |
| Currently supports the BCM7366, BCM7439, BCM7445, and |
| 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. |
| |
| config BCM84881_PHY |
| tristate "Broadcom BCM84881 PHY" |
| depends on PHYLIB |
| help |
| Support the Broadcom BCM84881 PHY. |
| |
| config BCM87XX_PHY |
| tristate "Broadcom BCM8706 and BCM8727 PHYs" |
| help |
| Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. |
| |
| config BCM_CYGNUS_PHY |
| tristate "Broadcom Cygnus/Omega SoC internal PHY" |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| depends on MDIO_BCM_IPROC |
| select BCM_NET_PHYLIB |
| help |
| This PHY driver is for the 1G internal PHYs of the Broadcom |
| Cygnus and Omega Family SoC. |
| |
| Currently supports internal PHY's used in the BCM11300, |
| BCM11320, BCM11350, BCM11360, BCM58300, BCM58302, |
| BCM58303 & BCM58305 Broadcom Cygnus SoCs. |
| |
| config BCM_NET_PHYLIB |
| tristate |
| |
| config CICADA_PHY |
| tristate "Cicada PHYs" |
| help |
| Currently supports the cis8204 |
| |
| config CORTINA_PHY |
| tristate "Cortina EDC CDR 10G Ethernet PHY" |
| help |
| Currently supports the CS4340 phy. |
| |
| config DAVICOM_PHY |
| tristate "Davicom PHYs" |
| help |
| Currently supports dm9161e and dm9131 |
| |
| config ICPLUS_PHY |
| tristate "ICPlus PHYs" |
| help |
| Currently supports the IP175C and IP1001 PHYs. |
| |
| config LXT_PHY |
| tristate "Intel LXT PHYs" |
| help |
| Currently supports the lxt970, lxt971 |
| |
| config INTEL_XWAY_PHY |
| tristate "Intel XWAY PHYs" |
| help |
| Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs. |
| These PHYs are marked as standalone chips under the names |
| PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel |
| SoCs xRX200, xRX300, xRX330, xRX350 and xRX550. |
| |
| config LSI_ET1011C_PHY |
| tristate "LSI ET1011C PHY" |
| help |
| Supports the LSI ET1011C PHY. |
| |
| config MARVELL_PHY |
| tristate "Marvell Alaska PHYs" |
| help |
| Currently has a driver for the 88E1XXX |
| |
| config MARVELL_10G_PHY |
| tristate "Marvell Alaska 10Gbit PHYs" |
| help |
| Support for the Marvell Alaska MV88X3310 and compatible PHYs. |
| |
| config MARVELL_88X2222_PHY |
| tristate "Marvell 88X2222 PHY" |
| help |
| Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet |
| Transceiver. |
| |
| config MAXLINEAR_GPHY |
| tristate "Maxlinear Ethernet PHYs" |
| help |
| Support for the Maxlinear GPY115, GPY211, GPY212, GPY215, |
| GPY241, GPY245 PHYs. |
| |
| config MEDIATEK_GE_PHY |
| tristate "MediaTek Gigabit Ethernet PHYs" |
| help |
| Supports the MediaTek Gigabit Ethernet PHYs. |
| |
| config MICREL_PHY |
| tristate "Micrel PHYs" |
| help |
| Supports the KSZ9021, VSC8201, KS8001 PHYs. |
| |
| config MICROCHIP_PHY |
| tristate "Microchip PHYs" |
| help |
| Supports the LAN88XX PHYs. |
| |
| config MICROCHIP_T1_PHY |
| tristate "Microchip T1 PHYs" |
| help |
| Supports the LAN87XX PHYs. |
| |
| config MICROSEMI_PHY |
| tristate "Microsemi PHYs" |
| depends on MACSEC || MACSEC=n |
| depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING |
| select CRYPTO_LIB_AES if MACSEC |
| help |
| Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs |
| |
| config MOTORCOMM_PHY |
| tristate "Motorcomm PHYs" |
| help |
| Enables support for Motorcomm network PHYs. |
| Currently supports the YT8511 gigabit PHY. |
| |
| config NATIONAL_PHY |
| tristate "National Semiconductor PHYs" |
| help |
| Currently supports the DP83865 PHY. |
| |
| config NXP_C45_TJA11XX_PHY |
| tristate "NXP C45 TJA11XX PHYs" |
| depends on PTP_1588_CLOCK_OPTIONAL |
| help |
| Enable support for NXP C45 TJA11XX PHYs. |
| Currently supports only the TJA1103 PHY. |
| |
| config NXP_TJA11XX_PHY |
| tristate "NXP TJA11xx PHYs support" |
| depends on HWMON |
| help |
| Currently supports the NXP TJA1100 and TJA1101 PHY. |
| |
| config AT803X_PHY |
| tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs" |
| depends on REGULATOR |
| help |
| Currently supports the AR8030, AR8031, AR8033, AR8035 and internal |
| QCA8337(Internal qca8k PHY) model |
| |
| config QSEMI_PHY |
| tristate "Quality Semiconductor PHYs" |
| help |
| Currently supports the qs6612 |
| |
| config REALTEK_PHY |
| tristate "Realtek PHYs" |
| help |
| Supports the Realtek 821x PHY. |
| |
| config RENESAS_PHY |
| tristate "Renesas PHYs" |
| help |
| Supports the Renesas PHYs uPD60620 and uPD60620A. |
| |
| config ROCKCHIP_PHY |
| tristate "Rockchip Ethernet PHYs" |
| help |
| Currently supports the integrated Ethernet PHY. |
| |
| config SMSC_PHY |
| tristate "SMSC PHYs" |
| help |
| Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs |
| |
| config STE10XP |
| tristate "STMicroelectronics STe10Xp PHYs" |
| help |
| This is the driver for the STe100p and STe101p PHYs. |
| |
| config TERANETICS_PHY |
| tristate "Teranetics PHYs" |
| help |
| Currently supports the Teranetics TN2020 |
| |
| config DP83822_PHY |
| tristate "Texas Instruments DP83822/825/826 PHYs" |
| help |
| Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S, |
| DP83826C and DP83826NC PHYs. |
| |
| config DP83TC811_PHY |
| tristate "Texas Instruments DP83TC811 PHY" |
| help |
| Supports the DP83TC811 PHY. |
| |
| config DP83848_PHY |
| tristate "Texas Instruments DP83848 PHY" |
| help |
| Supports the DP83848 PHY. |
| |
| config DP83867_PHY |
| tristate "Texas Instruments DP83867 Gigabit PHY" |
| help |
| Currently supports the DP83867 PHY. |
| |
| config DP83869_PHY |
| tristate "Texas Instruments DP83869 Gigabit PHY" |
| help |
| Currently supports the DP83869 PHY. This PHY supports copper and |
| fiber connections. |
| |
| config VITESSE_PHY |
| tristate "Vitesse PHYs" |
| help |
| Currently supports the vsc8244 |
| |
| config XILINX_GMII2RGMII |
| tristate "Xilinx GMII2RGMII converter driver" |
| help |
| This driver support xilinx GMII to RGMII IP core it provides |
| the Reduced Gigabit Media Independent Interface(RGMII) between |
| Ethernet physical media devices and the Gigabit Ethernet controller. |
| |
| endif # PHYLIB |
| |
| config MICREL_KS8995MA |
| tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch" |
| depends on SPI |
