| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Battery driver for the Ingenic JZ47xx SoCs |
| * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu> |
| * |
| * based on drivers/power/supply/jz4740-battery.c |
| */ |
| |
| #include <linux/iio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/property.h> |
| |
| struct ingenic_battery { |
| struct device *dev; |
| struct iio_channel *channel; |
| struct power_supply_desc desc; |
| struct power_supply *battery; |
| struct power_supply_battery_info info; |
| }; |
| |
| static int ingenic_battery_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct ingenic_battery *bat = power_supply_get_drvdata(psy); |
| struct power_supply_battery_info *info = &bat->info; |
| int ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_HEALTH: |
| ret = iio_read_channel_processed(bat->channel, &val->intval); |
| val->intval *= 1000; |
| if (val->intval < info->voltage_min_design_uv) |
| val->intval = POWER_SUPPLY_HEALTH_DEAD; |
| else if (val->intval > info->voltage_max_design_uv) |
| val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| else |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| return ret; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = iio_read_channel_processed(bat->channel, &val->intval); |
| val->intval *= 1000; |
| return ret; |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| val->intval = info->voltage_min_design_uv; |
| return 0; |
| case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: |
| val->intval = info->voltage_max_design_uv; |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* Set the most appropriate IIO channel voltage reference scale |
| * based on the battery's max voltage. |
| */ |
| static int ingenic_battery_set_scale(struct ingenic_battery *bat) |
| { |
| const int *scale_raw; |
| int scale_len, scale_type, best_idx = -1, best_mV, max_raw, i, ret; |
| u64 max_mV; |
| |
| ret = iio_read_max_channel_raw(bat->channel, &max_raw); |
| if (ret) { |
| dev_err(bat->dev, "Unable to read max raw channel value\n"); |
| return ret; |
| } |
| |
| ret = iio_read_avail_channel_attribute(bat->channel, &scale_raw, |
| &scale_type, &scale_len, |
| IIO_CHAN_INFO_SCALE); |
| if (ret < 0) { |
| dev_err(bat->dev, "Unable to read channel avail scale\n"); |
| return ret; |
| } |
| if (ret != IIO_AVAIL_LIST || scale_type != IIO_VAL_FRACTIONAL_LOG2) |
| return -EINVAL; |
| |
| max_mV = bat->info.voltage_max_design_uv / 1000; |
| |
| for (i = 0; i < scale_len; i += 2) { |
| u64 scale_mV = (max_raw * scale_raw[i]) >> scale_raw[i + 1]; |
| |
| if (scale_mV < max_mV) |
| continue; |
| |
| if (best_idx >= 0 && scale_mV > best_mV) |
| continue; |
| |
| best_mV = scale_mV; |
| best_idx = i; |
| } |
| |
| if (best_idx < 0) { |
| dev_err(bat->dev, "Unable to find matching voltage scale\n"); |
| return -EINVAL; |
| } |
| |
| /* Only set scale if there is more than one (fractional) entry */ |
| if (scale_len > 2) { |
| ret = iio_write_channel_attribute(bat->channel, |
| scale_raw[best_idx], |
| scale_raw[best_idx + 1], |
| IIO_CHAN_INFO_SCALE); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static enum power_supply_property ingenic_battery_properties[] = { |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, |
| }; |
| |
| static int ingenic_battery_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ingenic_battery *bat; |
| struct power_supply_config psy_cfg = {}; |
| struct power_supply_desc *desc; |
| int ret; |
| |
| bat = devm_kzalloc(dev, sizeof(*bat), GFP_KERNEL); |
| if (!bat) |
| return -ENOMEM; |
| |
| bat->dev = dev; |
| bat->channel = devm_iio_channel_get(dev, "battery"); |
| if (IS_ERR(bat->channel)) |
| return PTR_ERR(bat->channel); |
| |
| desc = &bat->desc; |
| desc->name = "jz-battery"; |
| desc->type = POWER_SUPPLY_TYPE_BATTERY; |
| desc->properties = ingenic_battery_properties; |
| desc->num_properties = ARRAY_SIZE(ingenic_battery_properties); |
| desc->get_property = ingenic_battery_get_property; |
| psy_cfg.drv_data = bat; |
| psy_cfg.of_node = dev->of_node; |
| |
| bat->battery = devm_power_supply_register(dev, desc, &psy_cfg); |
| if (IS_ERR(bat->battery)) |
| return dev_err_probe(dev, PTR_ERR(bat->battery), |
| "Unable to register battery\n"); |
| |
| ret = power_supply_get_battery_info(bat->battery, &bat->info); |
| if (ret) { |
| dev_err(dev, "Unable to get battery info: %d\n", ret); |
| return ret; |
| } |
| if (bat->info.voltage_min_design_uv < 0) { |
| dev_err(dev, "Unable to get voltage min design\n"); |
| return bat->info.voltage_min_design_uv; |
| } |
| if (bat->info.voltage_max_design_uv < 0) { |
| dev_err(dev, "Unable to get voltage max design\n"); |
| return bat->info.voltage_max_design_uv; |
| } |
| |
| return ingenic_battery_set_scale(bat); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id ingenic_battery_of_match[] = { |
| { .compatible = "ingenic,jz4740-battery", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ingenic_battery_of_match); |
| #endif |
| |
| static struct platform_driver ingenic_battery_driver = { |
| .driver = { |
| .name = "ingenic-battery", |
| .of_match_table = of_match_ptr(ingenic_battery_of_match), |
| }, |
| .probe = ingenic_battery_probe, |
| }; |
| module_platform_driver(ingenic_battery_driver); |
| |
| MODULE_DESCRIPTION("Battery driver for Ingenic JZ47xx SoCs"); |
| MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); |
| MODULE_LICENSE("GPL"); |