| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * PAV alias management for the DASD ECKD discipline |
| * |
| * Copyright IBM Corp. 2007 |
| * Author(s): Stefan Weinhuber <wein@de.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "dasd-eckd" |
| |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <asm/ebcdic.h> |
| #include "dasd_int.h" |
| #include "dasd_eckd.h" |
| |
| #ifdef PRINTK_HEADER |
| #undef PRINTK_HEADER |
| #endif /* PRINTK_HEADER */ |
| #define PRINTK_HEADER "dasd(eckd):" |
| |
| |
| /* |
| * General concept of alias management: |
| * - PAV and DASD alias management is specific to the eckd discipline. |
| * - A device is connected to an lcu as long as the device exists. |
| * dasd_alias_make_device_known_to_lcu will be called wenn the |
| * device is checked by the eckd discipline and |
| * dasd_alias_disconnect_device_from_lcu will be called |
| * before the device is deleted. |
| * - The dasd_alias_add_device / dasd_alias_remove_device |
| * functions mark the point when a device is 'ready for service'. |
| * - A summary unit check is a rare occasion, but it is mandatory to |
| * support it. It requires some complex recovery actions before the |
| * devices can be used again (see dasd_alias_handle_summary_unit_check). |
| * - dasd_alias_get_start_dev will find an alias device that can be used |
| * instead of the base device and does some (very simple) load balancing. |
| * This is the function that gets called for each I/O, so when improving |
| * something, this function should get faster or better, the rest has just |
| * to be correct. |
| */ |
| |
| |
| static void summary_unit_check_handling_work(struct work_struct *); |
| static void lcu_update_work(struct work_struct *); |
| static int _schedule_lcu_update(struct alias_lcu *, struct dasd_device *); |
| |
| static struct alias_root aliastree = { |
| .serverlist = LIST_HEAD_INIT(aliastree.serverlist), |
| .lock = __SPIN_LOCK_UNLOCKED(aliastree.lock), |
| }; |
| |
| static struct alias_server *_find_server(struct dasd_uid *uid) |
| { |
| struct alias_server *pos; |
| list_for_each_entry(pos, &aliastree.serverlist, server) { |
| if (!strncmp(pos->uid.vendor, uid->vendor, |
| sizeof(uid->vendor)) |
| && !strncmp(pos->uid.serial, uid->serial, |
| sizeof(uid->serial))) |
| return pos; |
| } |
| return NULL; |
| } |
| |
| static struct alias_lcu *_find_lcu(struct alias_server *server, |
| struct dasd_uid *uid) |
| { |
| struct alias_lcu *pos; |
| list_for_each_entry(pos, &server->lculist, lcu) { |
| if (pos->uid.ssid == uid->ssid) |
| return pos; |
| } |
| return NULL; |
| } |
| |
| static struct alias_pav_group *_find_group(struct alias_lcu *lcu, |
| struct dasd_uid *uid) |
| { |
| struct alias_pav_group *pos; |
| __u8 search_unit_addr; |
| |
| /* for hyper pav there is only one group */ |
| if (lcu->pav == HYPER_PAV) { |
| if (list_empty(&lcu->grouplist)) |
| return NULL; |
| else |
| return list_first_entry(&lcu->grouplist, |
| struct alias_pav_group, group); |
| } |
| |
| /* for base pav we have to find the group that matches the base */ |
| if (uid->type == UA_BASE_DEVICE) |
| search_unit_addr = uid->real_unit_addr; |
| else |
| search_unit_addr = uid->base_unit_addr; |
| list_for_each_entry(pos, &lcu->grouplist, group) { |
| if (pos->uid.base_unit_addr == search_unit_addr && |
| !strncmp(pos->uid.vduit, uid->vduit, sizeof(uid->vduit))) |
| return pos; |
| } |
| return NULL; |
| } |
| |
| static struct alias_server *_allocate_server(struct dasd_uid *uid) |
| { |
| struct alias_server *server; |
| |
| server = kzalloc(sizeof(*server), GFP_KERNEL); |
| if (!server) |
| return ERR_PTR(-ENOMEM); |
| memcpy(server->uid.vendor, uid->vendor, sizeof(uid->vendor)); |
| memcpy(server->uid.serial, uid->serial, sizeof(uid->serial)); |
| INIT_LIST_HEAD(&server->server); |
| INIT_LIST_HEAD(&server->lculist); |
| return server; |
| } |
| |
| static void _free_server(struct alias_server *server) |
| { |
| kfree(server); |
| } |
| |
| static struct alias_lcu *_allocate_lcu(struct dasd_uid *uid) |
| { |
| struct alias_lcu *lcu; |
| |
| lcu = kzalloc(sizeof(*lcu), GFP_KERNEL); |
| if (!lcu) |
| return ERR_PTR(-ENOMEM); |
| lcu->uac = kzalloc(sizeof(*(lcu->uac)), GFP_KERNEL | GFP_DMA); |
| if (!lcu->uac) |
| goto out_err1; |
| lcu->rsu_cqr = kzalloc(sizeof(*lcu->rsu_cqr), GFP_KERNEL | GFP_DMA); |
| if (!lcu->rsu_cqr) |
| goto out_err2; |
| lcu->rsu_cqr->cpaddr = kzalloc(sizeof(struct ccw1), |
| GFP_KERNEL | GFP_DMA); |
| if (!lcu->rsu_cqr->cpaddr) |
| goto out_err3; |
| lcu->rsu_cqr->data = kzalloc(16, GFP_KERNEL | GFP_DMA); |
| if (!lcu->rsu_cqr->data) |
| goto out_err4; |
| |
| memcpy(lcu->uid.vendor, uid->vendor, sizeof(uid->vendor)); |
| memcpy(lcu->uid.serial, uid->serial, sizeof(uid->serial)); |
| lcu->uid.ssid = uid->ssid; |
| lcu->pav = NO_PAV; |
| lcu->flags = NEED_UAC_UPDATE | UPDATE_PENDING; |
| INIT_LIST_HEAD(&lcu->lcu); |
| INIT_LIST_HEAD(&lcu->inactive_devices); |
| INIT_LIST_HEAD(&lcu->active_devices); |
| INIT_LIST_HEAD(&lcu->grouplist); |
| INIT_WORK(&lcu->suc_data.worker, summary_unit_check_handling_work); |
| INIT_DELAYED_WORK(&lcu->ruac_data.dwork, lcu_update_work); |
| spin_lock_init(&lcu->lock); |
| init_completion(&lcu->lcu_setup); |
| return lcu; |
| |
| out_err4: |
| kfree(lcu->rsu_cqr->cpaddr); |
| out_err3: |
| kfree(lcu->rsu_cqr); |
| out_err2: |
| kfree(lcu->uac); |
| out_err1: |
| kfree(lcu); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| static void _free_lcu(struct alias_lcu *lcu) |
| { |
| kfree(lcu->rsu_cqr->data); |
| kfree(lcu->rsu_cqr->cpaddr); |
| kfree(lcu->rsu_cqr); |
| kfree(lcu->uac); |
| kfree(lcu); |
| } |
| |
| /* |
| * This is the function that will allocate all the server and lcu data, |
| * so this function must be called first for a new device. |
| * If the return value is 1, the lcu was already known before, if it |
| * is 0, this is a new lcu. |
| * Negative return code indicates that something went wrong (e.g. -ENOMEM) |
| */ |
| int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| unsigned long flags; |
| struct alias_server *server, *newserver; |
| struct alias_lcu *lcu, *newlcu; |
| struct dasd_uid uid; |
| |
| device->discipline->get_uid(device, &uid); |
| spin_lock_irqsave(&aliastree.lock, flags); |
| server = _find_server(&uid); |
| if (!server) { |
| spin_unlock_irqrestore(&aliastree.lock, flags); |
| newserver = _allocate_server(&uid); |
| if (IS_ERR(newserver)) |
| return PTR_ERR(newserver); |
| spin_lock_irqsave(&aliastree.lock, flags); |
| server = _find_server(&uid); |
| if (!server) { |
| list_add(&newserver->server, &aliastree.serverlist); |
| server = newserver; |
| } else { |
| /* someone was faster */ |
| _free_server(newserver); |
| } |
| } |
| |
| lcu = _find_lcu(server, &uid); |
| if (!lcu) { |
| spin_unlock_irqrestore(&aliastree.lock, flags); |
| newlcu = _allocate_lcu(&uid); |
| if (IS_ERR(newlcu)) |
| return PTR_ERR(newlcu); |
| spin_lock_irqsave(&aliastree.lock, flags); |
| lcu = _find_lcu(server, &uid); |
| if (!lcu) { |
| list_add(&newlcu->lcu, &server->lculist); |
| lcu = newlcu; |
| } else { |
| /* someone was faster */ |
| _free_lcu(newlcu); |
| } |
| } |
| spin_lock(&lcu->lock); |
| list_add(&device->alias_list, &lcu->inactive_devices); |
| private->lcu = lcu; |
| spin_unlock(&lcu->lock); |
| spin_unlock_irqrestore(&aliastree.lock, flags); |
| |
| return 0; |
| } |
| |
| /* |
| * This function removes a device from the scope of alias management. |
| * The complicated part is to make sure that it is not in use by |
| * any of the workers. If necessary cancel the work. |
| */ |
| void dasd_alias_disconnect_device_from_lcu(struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| unsigned long flags; |
| struct alias_lcu *lcu; |
| struct alias_server *server; |
| int was_pending; |
| struct dasd_uid uid; |
| |
| lcu = private->lcu; |
| /* nothing to do if already disconnected */ |
| if (!lcu) |
| return; |
| device->discipline->get_uid(device, &uid); |
| spin_lock_irqsave(&lcu->lock, flags); |
| /* make sure that the workers don't use this device */ |
| if (device == lcu->suc_data.device) { |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| cancel_work_sync(&lcu->suc_data.worker); |
| spin_lock_irqsave(&lcu->lock, flags); |
| if (device == lcu->suc_data.device) { |
| dasd_put_device(device); |
| lcu->suc_data.device = NULL; |
| } |
| } |
| was_pending = 0; |
| if (device == lcu->ruac_data.device) { |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| was_pending = 1; |
| cancel_delayed_work_sync(&lcu->ruac_data.dwork); |
| spin_lock_irqsave(&lcu->lock, flags); |
| if (device == lcu->ruac_data.device) { |
| dasd_put_device(device); |
| lcu->ruac_data.device = NULL; |
| } |
| } |
| private->lcu = NULL; |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| |
| spin_lock_irqsave(&aliastree.lock, flags); |
| spin_lock(&lcu->lock); |
| list_del_init(&device->alias_list); |
| if (list_empty(&lcu->grouplist) && |
| list_empty(&lcu->active_devices) && |
| list_empty(&lcu->inactive_devices)) { |
| list_del(&lcu->lcu); |
| spin_unlock(&lcu->lock); |
| _free_lcu(lcu); |
| lcu = NULL; |
| } else { |
| if (was_pending) |
| _schedule_lcu_update(lcu, NULL); |
| spin_unlock(&lcu->lock); |
| } |
| server = _find_server(&uid); |
| if (server && list_empty(&server->lculist)) { |
| list_del(&server->server); |
| _free_server(server); |
| } |
| spin_unlock_irqrestore(&aliastree.lock, flags); |
| } |
| |
| /* |
| * This function assumes that the unit address configuration stored |
| * in the lcu is up to date and will update the device uid before |
| * adding it to a pav group. |
| */ |
| |
| static int _add_device_to_lcu(struct alias_lcu *lcu, |
| struct dasd_device *device, |
| struct dasd_device *pos) |
| { |
| |
| struct dasd_eckd_private *private = device->private; |
| struct alias_pav_group *group; |
| struct dasd_uid uid; |
| |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| private->uid.type = lcu->uac->unit[private->uid.real_unit_addr].ua_type; |
| private->uid.base_unit_addr = |
| lcu->uac->unit[private->uid.real_unit_addr].base_ua; |
| uid = private->uid; |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| /* if we have no PAV anyway, we don't need to bother with PAV groups */ |
| if (lcu->pav == NO_PAV) { |
| list_move(&device->alias_list, &lcu->active_devices); |
| return 0; |
| } |
| group = _find_group(lcu, &uid); |
| if (!group) { |
| group = kzalloc(sizeof(*group), GFP_ATOMIC); |
| if (!group) |
| return -ENOMEM; |
| memcpy(group->uid.vendor, uid.vendor, sizeof(uid.vendor)); |
| memcpy(group->uid.serial, uid.serial, sizeof(uid.serial)); |
| group->uid.ssid = uid.ssid; |
| if (uid.type == UA_BASE_DEVICE) |
| group->uid.base_unit_addr = uid.real_unit_addr; |
| else |
| group->uid.base_unit_addr = uid.base_unit_addr; |
| memcpy(group->uid.vduit, uid.vduit, sizeof(uid.vduit)); |
| INIT_LIST_HEAD(&group->group); |
| INIT_LIST_HEAD(&group->baselist); |
| INIT_LIST_HEAD(&group->aliaslist); |
| list_add(&group->group, &lcu->grouplist); |
| } |
| if (uid.type == UA_BASE_DEVICE) |
| list_move(&device->alias_list, &group->baselist); |
| else |
| list_move(&device->alias_list, &group->aliaslist); |
| private->pavgroup = group; |
| return 0; |
| }; |
| |
| static void _remove_device_from_lcu(struct alias_lcu *lcu, |
| struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| struct alias_pav_group *group; |
| |
| list_move(&device->alias_list, &lcu->inactive_devices); |
| group = private->pavgroup; |
| if (!group) |
| return; |
| private->pavgroup = NULL; |
| if (list_empty(&group->baselist) && list_empty(&group->aliaslist)) { |
| list_del(&group->group); |
| kfree(group); |
| return; |
| } |
| if (group->next == device) |
| group->next = NULL; |
| }; |
| |
| static int |
| suborder_not_supported(struct dasd_ccw_req *cqr) |
| { |
| char *sense; |
| char reason; |
| char msg_format; |
| char msg_no; |
| |
| /* |
| * intrc values ENODEV, ENOLINK and EPERM |
| * will be optained from sleep_on to indicate that no |
| * IO operation can be started |
| */ |
| if (cqr->intrc == -ENODEV) |
| return 1; |
| |
| if (cqr->intrc == -ENOLINK) |
| return 1; |
| |
| if (cqr->intrc == -EPERM) |
| return 1; |
| |
| sense = dasd_get_sense(&cqr->irb); |
| if (!sense) |
| return 0; |
| |
| reason = sense[0]; |
| msg_format = (sense[7] & 0xF0); |
| msg_no = (sense[7] & 0x0F); |
| |
| /* command reject, Format 0 MSG 4 - invalid parameter */ |
| if ((reason == 0x80) && (msg_format == 0x00) && (msg_no == 0x04)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int read_unit_address_configuration(struct dasd_device *device, |
| struct alias_lcu *lcu) |
| { |
| struct dasd_psf_prssd_data *prssdp; |
| struct dasd_ccw_req *cqr; |
| struct ccw1 *ccw; |
| int rc; |
| unsigned long flags; |
| |
| cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, |
| (sizeof(struct dasd_psf_prssd_data)), |
| device, NULL); |
| if (IS_ERR(cqr)) |
| return PTR_ERR(cqr); |
| cqr->startdev = device; |
| cqr->memdev = device; |
| clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); |
| cqr->retries = 10; |
| cqr->expires = 20 * HZ; |
| |
| /* Prepare for Read Subsystem Data */ |
| prssdp = (struct dasd_psf_prssd_data *) cqr->data; |
| memset(prssdp, 0, sizeof(struct dasd_psf_prssd_data)); |
| prssdp->order = PSF_ORDER_PRSSD; |
| prssdp->suborder = 0x0e; /* Read unit address configuration */ |
| /* all other bytes of prssdp must be zero */ |
| |
| ccw = cqr->cpaddr; |
| ccw->cmd_code = DASD_ECKD_CCW_PSF; |
| ccw->count = sizeof(struct dasd_psf_prssd_data); |
| ccw->flags |= CCW_FLAG_CC; |
| ccw->cda = (__u32)(addr_t) prssdp; |
| |
| /* Read Subsystem Data - feature codes */ |
| memset(lcu->uac, 0, sizeof(*(lcu->uac))); |
| |
| ccw++; |
| ccw->cmd_code = DASD_ECKD_CCW_RSSD; |
| ccw->count = sizeof(*(lcu->uac)); |
| ccw->cda = (__u32)(addr_t) lcu->uac; |
| |
| cqr->buildclk = get_tod_clock(); |
| cqr->status = DASD_CQR_FILLED; |
| |
| /* need to unset flag here to detect race with summary unit check */ |
| spin_lock_irqsave(&lcu->lock, flags); |
| lcu->flags &= ~NEED_UAC_UPDATE; |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| |
| rc = dasd_sleep_on(cqr); |
| if (!rc) |
| goto out; |
| |
| if (suborder_not_supported(cqr)) { |
| /* suborder not supported or device unusable for IO */ |
| rc = -EOPNOTSUPP; |
| } else { |
| /* IO failed but should be retried */ |
| spin_lock_irqsave(&lcu->lock, flags); |
| lcu->flags |= NEED_UAC_UPDATE; |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| } |
| out: |
| dasd_sfree_request(cqr, cqr->memdev); |
| return rc; |
| } |
| |
| static int _lcu_update(struct dasd_device *refdev, struct alias_lcu *lcu) |
| { |
| unsigned long flags; |
| struct alias_pav_group *pavgroup, *tempgroup; |
| struct dasd_device *device, *tempdev; |
| int i, rc; |
| struct dasd_eckd_private *private; |
| |
| spin_lock_irqsave(&lcu->lock, flags); |
| list_for_each_entry_safe(pavgroup, tempgroup, &lcu->grouplist, group) { |
| list_for_each_entry_safe(device, tempdev, &pavgroup->baselist, |
| alias_list) { |
| list_move(&device->alias_list, &lcu->active_devices); |
| private = device->private; |
| private->pavgroup = NULL; |
| } |
| list_for_each_entry_safe(device, tempdev, &pavgroup->aliaslist, |
| alias_list) { |
| list_move(&device->alias_list, &lcu->active_devices); |
| private = device->private; |
| private->pavgroup = NULL; |
| } |
| list_del(&pavgroup->group); |
| kfree(pavgroup); |
| } |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| |
| rc = read_unit_address_configuration(refdev, lcu); |
| if (rc) |
| return rc; |
| |
| spin_lock_irqsave(&lcu->lock, flags); |
| /* |
| * there is another update needed skip the remaining handling |
| * the data might already be outdated |
| * but especially do not add the device to an LCU with pending |
| * update |
| */ |
| if (lcu->flags & NEED_UAC_UPDATE) |
| goto out; |
| lcu->pav = NO_PAV; |
| for (i = 0; i < MAX_DEVICES_PER_LCU; ++i) { |
| switch (lcu->uac->unit[i].ua_type) { |
| case UA_BASE_PAV_ALIAS: |
| lcu->pav = BASE_PAV; |
| break; |
| case UA_HYPER_PAV_ALIAS: |
| lcu->pav = HYPER_PAV; |
| break; |
| } |
| if (lcu->pav != NO_PAV) |
| break; |
| } |
| |
| list_for_each_entry_safe(device, tempdev, &lcu->active_devices, |
| alias_list) { |
| _add_device_to_lcu(lcu, device, refdev); |
| } |
| out: |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| return 0; |
| } |
| |
| static void lcu_update_work(struct work_struct *work) |
| { |
| struct alias_lcu *lcu; |
| struct read_uac_work_data *ruac_data; |
| struct dasd_device *device; |
| unsigned long flags; |
| int rc; |
| |
| ruac_data = container_of(work, struct read_uac_work_data, dwork.work); |
| lcu = container_of(ruac_data, struct alias_lcu, ruac_data); |
| device = ruac_data->device; |
| rc = _lcu_update(device, lcu); |
| /* |
| * Need to check flags again, as there could have been another |
| * prepare_update or a new device a new device while we were still |
| * processing the data |
| */ |
| spin_lock_irqsave(&lcu->lock, flags); |
| if ((rc && (rc != -EOPNOTSUPP)) || (lcu->flags & NEED_UAC_UPDATE)) { |
| DBF_DEV_EVENT(DBF_WARNING, device, "could not update" |
| " alias data in lcu (rc = %d), retry later", rc); |
| if (!schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ)) |
| dasd_put_device(device); |
| } else { |
| dasd_put_device(device); |
| lcu->ruac_data.device = NULL; |
| lcu->flags &= ~UPDATE_PENDING; |
| } |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| } |
| |
| static int _schedule_lcu_update(struct alias_lcu *lcu, |
| struct dasd_device *device) |
| { |
| struct dasd_device *usedev = NULL; |
| struct alias_pav_group *group; |
| |
| lcu->flags |= NEED_UAC_UPDATE; |
| if (lcu->ruac_data.device) { |
| /* already scheduled or running */ |
| return 0; |
| } |
| if (device && !list_empty(&device->alias_list)) |
| usedev = device; |
| |
| if (!usedev && !list_empty(&lcu->grouplist)) { |
| group = list_first_entry(&lcu->grouplist, |
| struct alias_pav_group, group); |
| if (!list_empty(&group->baselist)) |
| usedev = list_first_entry(&group->baselist, |
| struct dasd_device, |
| alias_list); |
| else if (!list_empty(&group->aliaslist)) |
| usedev = list_first_entry(&group->aliaslist, |
| struct dasd_device, |
| alias_list); |
| } |
| if (!usedev && !list_empty(&lcu->active_devices)) { |
| usedev = list_first_entry(&lcu->active_devices, |
| struct dasd_device, alias_list); |
| } |
| /* |
| * if we haven't found a proper device yet, give up for now, the next |
| * device that will be set active will trigger an lcu update |
| */ |
| if (!usedev) |
| return -EINVAL; |
| dasd_get_device(usedev); |
| lcu->ruac_data.device = usedev; |
| if (!schedule_delayed_work(&lcu->ruac_data.dwork, 0)) |
| dasd_put_device(usedev); |
| return 0; |
| } |
| |
| int dasd_alias_add_device(struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| __u8 uaddr = private->uid.real_unit_addr; |
| struct alias_lcu *lcu = private->lcu; |
| unsigned long flags; |
| int rc; |
| |
| rc = 0; |
| spin_lock_irqsave(&lcu->lock, flags); |
| /* |
| * Check if device and lcu type differ. If so, the uac data may be |
| * outdated and needs to be updated. |
| */ |
| if (private->uid.type != lcu->uac->unit[uaddr].ua_type) { |
| lcu->flags |= UPDATE_PENDING; |
| DBF_DEV_EVENT(DBF_WARNING, device, "%s", |
| "uid type mismatch - trigger rescan"); |
| } |
| if (!(lcu->flags & UPDATE_PENDING)) { |
| rc = _add_device_to_lcu(lcu, device, device); |
| if (rc) |
| lcu->flags |= UPDATE_PENDING; |
| } |
| if (lcu->flags & UPDATE_PENDING) { |
| list_move(&device->alias_list, &lcu->active_devices); |
| private->pavgroup = NULL; |
| _schedule_lcu_update(lcu, device); |
| } |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| return rc; |
| } |
| |
| int dasd_alias_update_add_device(struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| |
| private->lcu->flags |= UPDATE_PENDING; |
| return dasd_alias_add_device(device); |
| } |
| |
| int dasd_alias_remove_device(struct dasd_device *device) |
| { |
| struct dasd_eckd_private *private = device->private; |
| struct alias_lcu *lcu = private->lcu; |
| unsigned long flags; |
| |
| /* nothing to do if already removed */ |
| if (!lcu) |
| return 0; |
| spin_lock_irqsave(&lcu->lock, flags); |
| _remove_device_from_lcu(lcu, device); |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| return 0; |
| } |
| |
| struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *base_device) |
| { |
| struct dasd_eckd_private *alias_priv, *private = base_device->private; |
| struct alias_pav_group *group = private->pavgroup; |
| struct alias_lcu *lcu = private->lcu; |
| struct dasd_device *alias_device; |
| unsigned long flags; |
| |
| if (!group || !lcu) |
| return NULL; |
| if (lcu->pav == NO_PAV || |
| lcu->flags & (NEED_UAC_UPDATE | UPDATE_PENDING)) |
| return NULL; |
| if (unlikely(!(private->features.feature[8] & 0x01))) { |
| /* |
| * PAV enabled but prefix not, very unlikely |
| * seems to be a lost pathgroup |
| * use base device to do IO |
| */ |
| DBF_DEV_EVENT(DBF_ERR, base_device, "%s", |
| "Prefix not enabled with PAV enabled\n"); |
| return NULL; |
| } |
| |
| spin_lock_irqsave(&lcu->lock, flags); |
| alias_device = group->next; |
| if (!alias_device) { |
| if (list_empty(&group->aliaslist)) { |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| return NULL; |
| } else { |
| alias_device = list_first_entry(&group->aliaslist, |
| struct dasd_device, |
| alias_list); |
| } |
| } |
| if (list_is_last(&alias_device->alias_list, &group->aliaslist)) |
| group->next = list_first_entry(&group->aliaslist, |
| struct dasd_device, alias_list); |
| else |
| group->next = list_first_entry(&alias_device->alias_list, |
| struct dasd_device, alias_list); |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| alias_priv = alias_device->private; |
| if ((alias_priv->count < private->count) && !alias_device->stopped && |
| !test_bit(DASD_FLAG_OFFLINE, &alias_device->flags)) |
| return alias_device; |
| else |
| return NULL; |
| } |
| |
| /* |
| * Summary unit check handling depends on the way alias devices |
| * are handled so it is done here rather then in dasd_eckd.c |
| */ |
| static int reset_summary_unit_check(struct alias_lcu *lcu, |
| struct dasd_device *device, |
| char reason) |
| { |
| struct dasd_ccw_req *cqr; |
| int rc = 0; |
| struct ccw1 *ccw; |
| |
| cqr = lcu->rsu_cqr; |
| memcpy((char *) &cqr->magic, "ECKD", 4); |
| ASCEBC((char *) &cqr->magic, 4); |
| ccw = cqr->cpaddr; |
| ccw->cmd_code = DASD_ECKD_CCW_RSCK; |
| ccw->flags = CCW_FLAG_SLI; |
| ccw->count = 16; |
| ccw->cda = (__u32)(addr_t) cqr->data; |
| ((char *)cqr->data)[0] = reason; |
| |
| clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); |
| cqr->retries = 255; /* set retry counter to enable basic ERP */ |
| cqr->startdev = device; |
| cqr->memdev = device; |
| cqr->block = NULL; |
| cqr->expires = 5 * HZ; |
| cqr->buildclk = get_tod_clock(); |
| cqr->status = DASD_CQR_FILLED; |
| |
| rc = dasd_sleep_on_immediatly(cqr); |
| return rc; |
| } |
| |
| static void _restart_all_base_devices_on_lcu(struct alias_lcu *lcu) |
| { |
| struct alias_pav_group *pavgroup; |
| struct dasd_device *device; |
| struct dasd_eckd_private *private; |
| |
| /* active and inactive list can contain alias as well as base devices */ |
| list_for_each_entry(device, &lcu->active_devices, alias_list) { |
| private = device->private; |
| if (private->uid.type != UA_BASE_DEVICE) |
| continue; |
| dasd_schedule_block_bh(device->block); |
| dasd_schedule_device_bh(device); |
| } |
| list_for_each_entry(device, &lcu->inactive_devices, alias_list) { |
| private = device->private; |
| if (private->uid.type != UA_BASE_DEVICE) |
| continue; |
| dasd_schedule_block_bh(device->block); |
| dasd_schedule_device_bh(device); |
| } |
| list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| list_for_each_entry(device, &pavgroup->baselist, alias_list) { |
| dasd_schedule_block_bh(device->block); |
| dasd_schedule_device_bh(device); |
| } |
| } |
| } |
| |
| static void flush_all_alias_devices_on_lcu(struct alias_lcu *lcu) |
| { |
| struct alias_pav_group *pavgroup; |
| struct dasd_device *device, *temp; |
| struct dasd_eckd_private *private; |
| unsigned long flags; |
| LIST_HEAD(active); |
| |
| /* |
| * Problem here ist that dasd_flush_device_queue may wait |
| * for termination of a request to complete. We can't keep |
| * the lcu lock during that time, so we must assume that |
| * the lists may have changed. |
| * Idea: first gather all active alias devices in a separate list, |
| * then flush the first element of this list unlocked, and afterwards |
| * check if it is still on the list before moving it to the |
| * active_devices list. |
| */ |
| |
| spin_lock_irqsave(&lcu->lock, flags); |
| list_for_each_entry_safe(device, temp, &lcu->active_devices, |
| alias_list) { |
| private = device->private; |
| if (private->uid.type == UA_BASE_DEVICE) |
| continue; |
| list_move(&device->alias_list, &active); |
| } |
| |
| list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| list_splice_init(&pavgroup->aliaslist, &active); |
| } |
| while (!list_empty(&active)) { |
| device = list_first_entry(&active, struct dasd_device, |
| alias_list); |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| dasd_flush_device_queue(device); |
| spin_lock_irqsave(&lcu->lock, flags); |
| /* |
| * only move device around if it wasn't moved away while we |
| * were waiting for the flush |
| */ |
| if (device == list_first_entry(&active, |
| struct dasd_device, alias_list)) { |
| list_move(&device->alias_list, &lcu->active_devices); |
| private = device->private; |
| private->pavgroup = NULL; |
| } |
| } |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| } |
| |
| static void _stop_all_devices_on_lcu(struct alias_lcu *lcu) |
| { |
| struct alias_pav_group *pavgroup; |
| struct dasd_device *device; |
| |
| list_for_each_entry(device, &lcu->active_devices, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_set_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(device, &lcu->inactive_devices, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_set_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| list_for_each_entry(device, &pavgroup->baselist, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_set_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(device, &pavgroup->aliaslist, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_set_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| } |
| } |
| |
| static void _unstop_all_devices_on_lcu(struct alias_lcu *lcu) |
| { |
| struct alias_pav_group *pavgroup; |
| struct dasd_device *device; |
| |
| list_for_each_entry(device, &lcu->active_devices, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_remove_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(device, &lcu->inactive_devices, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_remove_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(pavgroup, &lcu->grouplist, group) { |
| list_for_each_entry(device, &pavgroup->baselist, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_remove_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| list_for_each_entry(device, &pavgroup->aliaslist, alias_list) { |
| spin_lock(get_ccwdev_lock(device->cdev)); |
| dasd_device_remove_stop_bits(device, DASD_STOPPED_SU); |
| spin_unlock(get_ccwdev_lock(device->cdev)); |
| } |
| } |
| } |
| |
| static void summary_unit_check_handling_work(struct work_struct *work) |
| { |
| struct alias_lcu *lcu; |
| struct summary_unit_check_work_data *suc_data; |
| unsigned long flags; |
| struct dasd_device *device; |
| |
| suc_data = container_of(work, struct summary_unit_check_work_data, |
| worker); |
| lcu = container_of(suc_data, struct alias_lcu, suc_data); |
| device = suc_data->device; |
| |
| /* 1. flush alias devices */ |
| flush_all_alias_devices_on_lcu(lcu); |
| |
| /* 2. reset summary unit check */ |
| spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags); |
| dasd_device_remove_stop_bits(device, |
| (DASD_STOPPED_SU | DASD_STOPPED_PENDING)); |
| spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); |
| reset_summary_unit_check(lcu, device, suc_data->reason); |
| |
| spin_lock_irqsave(&lcu->lock, flags); |
| _unstop_all_devices_on_lcu(lcu); |
| _restart_all_base_devices_on_lcu(lcu); |
| /* 3. read new alias configuration */ |
| _schedule_lcu_update(lcu, device); |
| lcu->suc_data.device = NULL; |
| dasd_put_device(device); |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| } |
| |
| void dasd_alias_handle_summary_unit_check(struct work_struct *work) |
| { |
| struct dasd_device *device = container_of(work, struct dasd_device, |
| suc_work); |
| struct dasd_eckd_private *private = device->private; |
| struct alias_lcu *lcu; |
| unsigned long flags; |
| |
| lcu = private->lcu; |
| if (!lcu) { |
| DBF_DEV_EVENT(DBF_WARNING, device, "%s", |
| "device not ready to handle summary" |
| " unit check (no lcu structure)"); |
| goto out; |
| } |
| spin_lock_irqsave(&lcu->lock, flags); |
| /* If this device is about to be removed just return and wait for |
| * the next interrupt on a different device |
| */ |
| if (list_empty(&device->alias_list)) { |
| DBF_DEV_EVENT(DBF_WARNING, device, "%s", |
| "device is in offline processing," |
| " don't do summary unit check handling"); |
| goto out_unlock; |
| } |
| if (lcu->suc_data.device) { |
| /* already scheduled or running */ |
| DBF_DEV_EVENT(DBF_WARNING, device, "%s", |
| "previous instance of summary unit check worker" |
| " still pending"); |
| goto out_unlock; |
| } |
| _stop_all_devices_on_lcu(lcu); |
| /* prepare for lcu_update */ |
| lcu->flags |= NEED_UAC_UPDATE | UPDATE_PENDING; |
| lcu->suc_data.reason = private->suc_reason; |
| lcu->suc_data.device = device; |
| dasd_get_device(device); |
| if (!schedule_work(&lcu->suc_data.worker)) |
| dasd_put_device(device); |
| out_unlock: |
| spin_unlock_irqrestore(&lcu->lock, flags); |
| out: |
| clear_bit(DASD_FLAG_SUC, &device->flags); |
| dasd_put_device(device); |
| }; |