| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Mediated virtual PCI serial host device driver |
| * |
| * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. |
| * Author: Neo Jia <cjia@nvidia.com> |
| * Kirti Wankhede <kwankhede@nvidia.com> |
| * |
| * Sample driver that creates mdev device that simulates serial port over PCI |
| * card. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/poll.h> |
| #include <linux/slab.h> |
| #include <linux/cdev.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/uuid.h> |
| #include <linux/vfio.h> |
| #include <linux/iommu.h> |
| #include <linux/sysfs.h> |
| #include <linux/ctype.h> |
| #include <linux/file.h> |
| #include <linux/mdev.h> |
| #include <linux/pci.h> |
| #include <linux/serial.h> |
| #include <uapi/linux/serial_reg.h> |
| #include <linux/eventfd.h> |
| /* |
| * #defines |
| */ |
| |
| #define VERSION_STRING "0.1" |
| #define DRIVER_AUTHOR "NVIDIA Corporation" |
| |
| #define MTTY_CLASS_NAME "mtty" |
| |
| #define MTTY_NAME "mtty" |
| |
| #define MTTY_STRING_LEN 16 |
| |
| #define MTTY_CONFIG_SPACE_SIZE 0xff |
| #define MTTY_IO_BAR_SIZE 0x8 |
| #define MTTY_MMIO_BAR_SIZE 0x100000 |
| |
| #define STORE_LE16(addr, val) (*(u16 *)addr = val) |
| #define STORE_LE32(addr, val) (*(u32 *)addr = val) |
| |
| #define MAX_FIFO_SIZE 16 |
| |
| #define CIRCULAR_BUF_INC_IDX(idx) (idx = (idx + 1) & (MAX_FIFO_SIZE - 1)) |
| |
| #define MTTY_VFIO_PCI_OFFSET_SHIFT 40 |
| |
| #define MTTY_VFIO_PCI_OFFSET_TO_INDEX(off) (off >> MTTY_VFIO_PCI_OFFSET_SHIFT) |
| #define MTTY_VFIO_PCI_INDEX_TO_OFFSET(index) \ |
| ((u64)(index) << MTTY_VFIO_PCI_OFFSET_SHIFT) |
| #define MTTY_VFIO_PCI_OFFSET_MASK \ |
| (((u64)(1) << MTTY_VFIO_PCI_OFFSET_SHIFT) - 1) |
| #define MAX_MTTYS 24 |
| |
| /* |
| * Global Structures |
| */ |
| |
| static struct mtty_dev { |
| dev_t vd_devt; |
| struct class *vd_class; |
| struct cdev vd_cdev; |
| struct idr vd_idr; |
| struct device dev; |
| } mtty_dev; |
| |
| struct mdev_region_info { |
| u64 start; |
| u64 phys_start; |
| u32 size; |
| u64 vfio_offset; |
| }; |
| |
| #if defined(DEBUG_REGS) |
| static const char *wr_reg[] = { |
| "TX", |
| "IER", |
| "FCR", |
| "LCR", |
| "MCR", |
| "LSR", |
| "MSR", |
| "SCR" |
| }; |
| |
| static const char *rd_reg[] = { |
| "RX", |
| "IER", |
| "IIR", |
| "LCR", |
| "MCR", |
| "LSR", |
| "MSR", |
| "SCR" |
| }; |
| #endif |
| |
| /* loop back buffer */ |
| struct rxtx { |
| u8 fifo[MAX_FIFO_SIZE]; |
| u8 head, tail; |
| u8 count; |
| }; |
| |
| struct serial_port { |
| u8 uart_reg[8]; /* 8 registers */ |
| struct rxtx rxtx; /* loop back buffer */ |
| bool dlab; |
| bool overrun; |
| u16 divisor; |
| u8 fcr; /* FIFO control register */ |
| u8 max_fifo_size; |
| u8 intr_trigger_level; /* interrupt trigger level */ |
| }; |
| |
| /* State of each mdev device */ |
| struct mdev_state { |
| struct vfio_device vdev; |
| int irq_fd; |
| struct eventfd_ctx *intx_evtfd; |
| struct eventfd_ctx *msi_evtfd; |
| int irq_index; |
| u8 *vconfig; |
| struct mutex ops_lock; |
| struct mdev_device *mdev; |
| struct mdev_region_info region_info[VFIO_PCI_NUM_REGIONS]; |
| u32 bar_mask[VFIO_PCI_NUM_REGIONS]; |
| struct list_head next; |
| struct serial_port s[2]; |
| struct mutex rxtx_lock; |
| struct vfio_device_info dev_info; |
| int nr_ports; |
| }; |
| |
| static atomic_t mdev_avail_ports = ATOMIC_INIT(MAX_MTTYS); |
| |
| static const struct file_operations vd_fops = { |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct vfio_device_ops mtty_dev_ops; |
| |
| /* function prototypes */ |
| |
| static int mtty_trigger_interrupt(struct mdev_state *mdev_state); |
| |
| /* Helper functions */ |
| |
| static void dump_buffer(u8 *buf, uint32_t count) |
| { |
| #if defined(DEBUG) |
| int i; |
| |
| pr_info("Buffer:\n"); |
| for (i = 0; i < count; i++) { |
| pr_info("%2x ", *(buf + i)); |
| if ((i + 1) % 16 == 0) |
| pr_info("\n"); |
| } |
| #endif |
| } |
| |
| static void mtty_create_config_space(struct mdev_state *mdev_state) |
| { |
| /* PCI dev ID */ |
| STORE_LE32((u32 *) &mdev_state->vconfig[0x0], 0x32534348); |
| |
| /* Control: I/O+, Mem-, BusMaster- */ |
| STORE_LE16((u16 *) &mdev_state->vconfig[0x4], 0x0001); |
| |
| /* Status: capabilities list absent */ |
| STORE_LE16((u16 *) &mdev_state->vconfig[0x6], 0x0200); |
| |
| /* Rev ID */ |
| mdev_state->vconfig[0x8] = 0x10; |
| |
| /* programming interface class : 16550-compatible serial controller */ |
| mdev_state->vconfig[0x9] = 0x02; |
| |
| /* Sub class : 00 */ |
| mdev_state->vconfig[0xa] = 0x00; |
| |
| /* Base class : Simple Communication controllers */ |
| mdev_state->vconfig[0xb] = 0x07; |
| |
| /* base address registers */ |
| /* BAR0: IO space */ |
| STORE_LE32((u32 *) &mdev_state->vconfig[0x10], 0x000001); |
| mdev_state->bar_mask[0] = ~(MTTY_IO_BAR_SIZE) + 1; |
| |
| if (mdev_state->nr_ports == 2) { |
| /* BAR1: IO space */ |
| STORE_LE32((u32 *) &mdev_state->vconfig[0x14], 0x000001); |
| mdev_state->bar_mask[1] = ~(MTTY_IO_BAR_SIZE) + 1; |
| } |
| |
| /* Subsystem ID */ |
| STORE_LE32((u32 *) &mdev_state->vconfig[0x2c], 0x32534348); |
| |
| mdev_state->vconfig[0x34] = 0x00; /* Cap Ptr */ |
| mdev_state->vconfig[0x3d] = 0x01; /* interrupt pin (INTA#) */ |
| |
| /* Vendor specific data */ |
| mdev_state->vconfig[0x40] = 0x23; |
| mdev_state->vconfig[0x43] = 0x80; |
| mdev_state->vconfig[0x44] = 0x23; |
| mdev_state->vconfig[0x48] = 0x23; |
| mdev_state->vconfig[0x4c] = 0x23; |
| |
| mdev_state->vconfig[0x60] = 0x50; |
| mdev_state->vconfig[0x61] = 0x43; |
| mdev_state->vconfig[0x62] = 0x49; |
| mdev_state->vconfig[0x63] = 0x20; |
| mdev_state->vconfig[0x64] = 0x53; |
| mdev_state->vconfig[0x65] = 0x65; |
| mdev_state->vconfig[0x66] = 0x72; |
| mdev_state->vconfig[0x67] = 0x69; |
| mdev_state->vconfig[0x68] = 0x61; |
| mdev_state->vconfig[0x69] = 0x6c; |
| mdev_state->vconfig[0x6a] = 0x2f; |
| mdev_state->vconfig[0x6b] = 0x55; |
| mdev_state->vconfig[0x6c] = 0x41; |
| mdev_state->vconfig[0x6d] = 0x52; |
| mdev_state->vconfig[0x6e] = 0x54; |
| } |
| |
| static void handle_pci_cfg_write(struct mdev_state *mdev_state, u16 offset, |
| u8 *buf, u32 count) |
| { |
| u32 cfg_addr, bar_mask, bar_index = 0; |
| |
| switch (offset) { |
| case 0x04: /* device control */ |
| case 0x06: /* device status */ |
| /* do nothing */ |
| break; |
| case 0x3c: /* interrupt line */ |
| mdev_state->vconfig[0x3c] = buf[0]; |
| break; |
| case 0x3d: |
| /* |
| * Interrupt Pin is hardwired to INTA. |
| * This field is write protected by hardware |
| */ |
| break; |
| case 0x10: /* BAR0 */ |
| case 0x14: /* BAR1 */ |
| if (offset == 0x10) |
| bar_index = 0; |
| else if (offset == 0x14) |
| bar_index = 1; |
| |
| if ((mdev_state->nr_ports == 1) && (bar_index == 1)) { |
| STORE_LE32(&mdev_state->vconfig[offset], 0); |
| break; |
| } |
| |
| cfg_addr = *(u32 *)buf; |
| pr_info("BAR%d addr 0x%x\n", bar_index, cfg_addr); |
| |
| if (cfg_addr == 0xffffffff) { |
| bar_mask = mdev_state->bar_mask[bar_index]; |
| cfg_addr = (cfg_addr & bar_mask); |
| } |
| |
| cfg_addr |= (mdev_state->vconfig[offset] & 0x3ul); |
| STORE_LE32(&mdev_state->vconfig[offset], cfg_addr); |
| break; |
| case 0x18: /* BAR2 */ |
| case 0x1c: /* BAR3 */ |
| case 0x20: /* BAR4 */ |
| STORE_LE32(&mdev_state->vconfig[offset], 0); |
| break; |
| default: |
| pr_info("PCI config write @0x%x of %d bytes not handled\n", |
| offset, count); |
| break; |
| } |
| } |
| |
| static void handle_bar_write(unsigned int index, struct mdev_state *mdev_state, |
| u16 offset, u8 *buf, u32 count) |
| { |
| u8 data = *buf; |
| |
| /* Handle data written by guest */ |
| switch (offset) { |
| case UART_TX: |
| /* if DLAB set, data is LSB of divisor */ |
| if (mdev_state->s[index].dlab) { |
| mdev_state->s[index].divisor |= data; |
| break; |
| } |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| |
| /* save in TX buffer */ |
| if (mdev_state->s[index].rxtx.count < |
| mdev_state->s[index].max_fifo_size) { |
| mdev_state->s[index].rxtx.fifo[ |
| mdev_state->s[index].rxtx.head] = data; |
| mdev_state->s[index].rxtx.count++; |
| CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.head); |
| mdev_state->s[index].overrun = false; |
| |
| /* |
| * Trigger interrupt if receive data interrupt is |
| * enabled and fifo reached trigger level |
| */ |
| if ((mdev_state->s[index].uart_reg[UART_IER] & |
| UART_IER_RDI) && |
| (mdev_state->s[index].rxtx.count == |
| mdev_state->s[index].intr_trigger_level)) { |
| /* trigger interrupt */ |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: Fifo level trigger\n", |
| index); |
| #endif |
| mtty_trigger_interrupt(mdev_state); |
| } |
| } else { |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: Buffer Overflow\n", index); |
| #endif |
| mdev_state->s[index].overrun = true; |
| |
| /* |
| * Trigger interrupt if receiver line status interrupt |
| * is enabled |
| */ |
| if (mdev_state->s[index].uart_reg[UART_IER] & |
| UART_IER_RLSI) |
| mtty_trigger_interrupt(mdev_state); |
| } |
| mutex_unlock(&mdev_state->rxtx_lock); |
| break; |
| |
| case UART_IER: |
| /* if DLAB set, data is MSB of divisor */ |
| if (mdev_state->s[index].dlab) |
| mdev_state->s[index].divisor |= (u16)data << 8; |
| else { |
| mdev_state->s[index].uart_reg[offset] = data; |
| mutex_lock(&mdev_state->rxtx_lock); |
| if ((data & UART_IER_THRI) && |
| (mdev_state->s[index].rxtx.head == |
| mdev_state->s[index].rxtx.tail)) { |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: IER_THRI write\n", |
| index); |
| #endif |
| mtty_trigger_interrupt(mdev_state); |
| } |
| |
| mutex_unlock(&mdev_state->rxtx_lock); |
| } |
| |
| break; |
| |
| case UART_FCR: |
| mdev_state->s[index].fcr = data; |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| if (data & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT)) { |
| /* clear loop back FIFO */ |
| mdev_state->s[index].rxtx.count = 0; |
| mdev_state->s[index].rxtx.head = 0; |
| mdev_state->s[index].rxtx.tail = 0; |
| } |
| mutex_unlock(&mdev_state->rxtx_lock); |
| |
| switch (data & UART_FCR_TRIGGER_MASK) { |
| case UART_FCR_TRIGGER_1: |
| mdev_state->s[index].intr_trigger_level = 1; |
| break; |
| |
| case UART_FCR_TRIGGER_4: |
| mdev_state->s[index].intr_trigger_level = 4; |
| break; |
| |
| case UART_FCR_TRIGGER_8: |
| mdev_state->s[index].intr_trigger_level = 8; |
| break; |
| |
| case UART_FCR_TRIGGER_14: |
| mdev_state->s[index].intr_trigger_level = 14; |
| break; |
| } |
| |
| /* |
| * Set trigger level to 1 otherwise or implement timer with |
| * timeout of 4 characters and on expiring that timer set |
| * Recevice data timeout in IIR register |
| */ |
| mdev_state->s[index].intr_trigger_level = 1; |
| if (data & UART_FCR_ENABLE_FIFO) |
| mdev_state->s[index].max_fifo_size = MAX_FIFO_SIZE; |
| else { |
| mdev_state->s[index].max_fifo_size = 1; |
| mdev_state->s[index].intr_trigger_level = 1; |
| } |
| |
| break; |
| |
| case UART_LCR: |
| if (data & UART_LCR_DLAB) { |
| mdev_state->s[index].dlab = true; |
| mdev_state->s[index].divisor = 0; |
| } else |
| mdev_state->s[index].dlab = false; |
| |
| mdev_state->s[index].uart_reg[offset] = data; |
| break; |
| |
| case UART_MCR: |
| mdev_state->s[index].uart_reg[offset] = data; |
| |
| if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) && |
| (data & UART_MCR_OUT2)) { |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: MCR_OUT2 write\n", index); |
| #endif |
| mtty_trigger_interrupt(mdev_state); |
| } |
| |
| if ((mdev_state->s[index].uart_reg[UART_IER] & UART_IER_MSI) && |
| (data & (UART_MCR_RTS | UART_MCR_DTR))) { |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: MCR RTS/DTR write\n", index); |
| #endif |
| mtty_trigger_interrupt(mdev_state); |
| } |
| break; |
| |
| case UART_LSR: |
| case UART_MSR: |
| /* do nothing */ |
| break; |
| |
| case UART_SCR: |
| mdev_state->s[index].uart_reg[offset] = data; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void handle_bar_read(unsigned int index, struct mdev_state *mdev_state, |
| u16 offset, u8 *buf, u32 count) |
| { |
| /* Handle read requests by guest */ |
| switch (offset) { |
| case UART_RX: |
| /* if DLAB set, data is LSB of divisor */ |
| if (mdev_state->s[index].dlab) { |
| *buf = (u8)mdev_state->s[index].divisor; |
| break; |
| } |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| /* return data in tx buffer */ |
| if (mdev_state->s[index].rxtx.head != |
| mdev_state->s[index].rxtx.tail) { |
| *buf = mdev_state->s[index].rxtx.fifo[ |
| mdev_state->s[index].rxtx.tail]; |
| mdev_state->s[index].rxtx.count--; |
| CIRCULAR_BUF_INC_IDX(mdev_state->s[index].rxtx.tail); |
| } |
| |
| if (mdev_state->s[index].rxtx.head == |
| mdev_state->s[index].rxtx.tail) { |
| /* |
| * Trigger interrupt if tx buffer empty interrupt is |
| * enabled and fifo is empty |
| */ |
| #if defined(DEBUG_INTR) |
| pr_err("Serial port %d: Buffer Empty\n", index); |
| #endif |
| if (mdev_state->s[index].uart_reg[UART_IER] & |
| UART_IER_THRI) |
| mtty_trigger_interrupt(mdev_state); |
| } |
| mutex_unlock(&mdev_state->rxtx_lock); |
| |
| break; |
| |
| case UART_IER: |
| if (mdev_state->s[index].dlab) { |
| *buf = (u8)(mdev_state->s[index].divisor >> 8); |
| break; |
| } |
| *buf = mdev_state->s[index].uart_reg[offset] & 0x0f; |
| break; |
| |
| case UART_IIR: |
| { |
| u8 ier = mdev_state->s[index].uart_reg[UART_IER]; |
| *buf = 0; |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| /* Interrupt priority 1: Parity, overrun, framing or break */ |
| if ((ier & UART_IER_RLSI) && mdev_state->s[index].overrun) |
| *buf |= UART_IIR_RLSI; |
| |
| /* Interrupt priority 2: Fifo trigger level reached */ |
| if ((ier & UART_IER_RDI) && |
| (mdev_state->s[index].rxtx.count >= |
| mdev_state->s[index].intr_trigger_level)) |
| *buf |= UART_IIR_RDI; |
| |
| /* Interrupt priotiry 3: transmitter holding register empty */ |
| if ((ier & UART_IER_THRI) && |
| (mdev_state->s[index].rxtx.head == |
| mdev_state->s[index].rxtx.tail)) |
| *buf |= UART_IIR_THRI; |
| |
| /* Interrupt priotiry 4: Modem status: CTS, DSR, RI or DCD */ |
| if ((ier & UART_IER_MSI) && |
| (mdev_state->s[index].uart_reg[UART_MCR] & |
| (UART_MCR_RTS | UART_MCR_DTR))) |
| *buf |= UART_IIR_MSI; |
| |
| /* bit0: 0=> interrupt pending, 1=> no interrupt is pending */ |
| if (*buf == 0) |
| *buf = UART_IIR_NO_INT; |
| |
| /* set bit 6 & 7 to be 16550 compatible */ |
| *buf |= 0xC0; |
| mutex_unlock(&mdev_state->rxtx_lock); |
| } |
| break; |
| |
| case UART_LCR: |
| case UART_MCR: |
| *buf = mdev_state->s[index].uart_reg[offset]; |
| break; |
| |
| case UART_LSR: |
| { |
| u8 lsr = 0; |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| /* atleast one char in FIFO */ |
| if (mdev_state->s[index].rxtx.head != |
| mdev_state->s[index].rxtx.tail) |
| lsr |= UART_LSR_DR; |
| |
| /* if FIFO overrun */ |
| if (mdev_state->s[index].overrun) |
| lsr |= UART_LSR_OE; |
| |
| /* transmit FIFO empty and tramsitter empty */ |
| if (mdev_state->s[index].rxtx.head == |
| mdev_state->s[index].rxtx.tail) |
| lsr |= UART_LSR_TEMT | UART_LSR_THRE; |
| |
| mutex_unlock(&mdev_state->rxtx_lock); |
| *buf = lsr; |
| break; |
| } |
| case UART_MSR: |
| *buf = UART_MSR_DSR | UART_MSR_DDSR | UART_MSR_DCD; |
| |
| mutex_lock(&mdev_state->rxtx_lock); |
| /* if AFE is 1 and FIFO have space, set CTS bit */ |
| if (mdev_state->s[index].uart_reg[UART_MCR] & |
| UART_MCR_AFE) { |
| if (mdev_state->s[index].rxtx.count < |
| mdev_state->s[index].max_fifo_size) |
| *buf |= UART_MSR_CTS | UART_MSR_DCTS; |
| } else |
| *buf |= UART_MSR_CTS | UART_MSR_DCTS; |
| mutex_unlock(&mdev_state->rxtx_lock); |
| |
| break; |
| |
| case UART_SCR: |
| *buf = mdev_state->s[index].uart_reg[offset]; |
| break; |
| |
| default: |
| break; |
| } |
| } |
| |
| static void mdev_read_base(struct mdev_state *mdev_state) |
| { |
| int index, pos; |
| u32 start_lo, start_hi; |
| u32 mem_type; |
| |
| pos = PCI_BASE_ADDRESS_0; |
| |
| for (index = 0; index <= VFIO_PCI_BAR5_REGION_INDEX; index++) { |
| |
| if (!mdev_state->region_info[index].size) |
| continue; |
| |
| start_lo = (*(u32 *)(mdev_state->vconfig + pos)) & |
| PCI_BASE_ADDRESS_MEM_MASK; |
| mem_type = (*(u32 *)(mdev_state->vconfig + pos)) & |
| PCI_BASE_ADDRESS_MEM_TYPE_MASK; |
| |
| switch (mem_type) { |
| case PCI_BASE_ADDRESS_MEM_TYPE_64: |
| start_hi = (*(u32 *)(mdev_state->vconfig + pos + 4)); |
| pos += 4; |
| break; |
| case PCI_BASE_ADDRESS_MEM_TYPE_32: |
| case PCI_BASE_ADDRESS_MEM_TYPE_1M: |
| /* 1M mem BAR treated as 32-bit BAR */ |
| default: |
| /* mem unknown type treated as 32-bit BAR */ |
| start_hi = 0; |
| break; |
| } |
| pos += 4; |
| mdev_state->region_info[index].start = ((u64)start_hi << 32) | |
| start_lo; |
| } |
| } |
| |
| static ssize_t mdev_access(struct mdev_state *mdev_state, u8 *buf, size_t count, |
| loff_t pos, bool is_write) |
| { |
| unsigned int index; |
| loff_t offset; |
| int ret = 0; |
| |
| if (!buf) |
| return -EINVAL; |
| |
| mutex_lock(&mdev_state->ops_lock); |
| |
| index = MTTY_VFIO_PCI_OFFSET_TO_INDEX(pos); |
| offset = pos & MTTY_VFIO_PCI_OFFSET_MASK; |
| switch (index) { |
| case VFIO_PCI_CONFIG_REGION_INDEX: |
| |
| #if defined(DEBUG) |
| pr_info("%s: PCI config space %s at offset 0x%llx\n", |
| __func__, is_write ? "write" : "read", offset); |
| #endif |
| if (is_write) { |
| dump_buffer(buf, count); |
| handle_pci_cfg_write(mdev_state, offset, buf, count); |
| } else { |
| memcpy(buf, (mdev_state->vconfig + offset), count); |
| dump_buffer(buf, count); |
| } |
| |
| break; |
| |
| case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX: |
| if (!mdev_state->region_info[index].start) |
| mdev_read_base(mdev_state); |
| |
| if (is_write) { |
| dump_buffer(buf, count); |
| |
| #if defined(DEBUG_REGS) |
| pr_info("%s: BAR%d WR @0x%llx %s val:0x%02x dlab:%d\n", |
| __func__, index, offset, wr_reg[offset], |
| *buf, mdev_state->s[index].dlab); |
| #endif |
| handle_bar_write(index, mdev_state, offset, buf, count); |
| } else { |
| handle_bar_read(index, mdev_state, offset, buf, count); |
| dump_buffer(buf, count); |
| |
| #if defined(DEBUG_REGS) |
| pr_info("%s: BAR%d RD @0x%llx %s val:0x%02x dlab:%d\n", |
| __func__, index, offset, rd_reg[offset], |
| *buf, mdev_state->s[index].dlab); |
| #endif |
| } |
| break; |
| |
| default: |
| ret = -1; |
| goto accessfailed; |
| } |
| |
| ret = count; |
| |
| |
| accessfailed: |
| mutex_unlock(&mdev_state->ops_lock); |
| |
| return ret; |
| } |
| |
| static int mtty_probe(struct mdev_device *mdev) |
| { |
| struct mdev_state *mdev_state; |
| int nr_ports = mdev_get_type_group_id(mdev) + 1; |
| int avail_ports = atomic_read(&mdev_avail_ports); |
| int ret; |
| |
| do { |
| if (avail_ports < nr_ports) |
| return -ENOSPC; |
| } while (!atomic_try_cmpxchg(&mdev_avail_ports, |
| &avail_ports, avail_ports - nr_ports)); |
| |
| mdev_state = kzalloc(sizeof(struct mdev_state), GFP_KERNEL); |
| if (mdev_state == NULL) { |
| ret = -ENOMEM; |
| goto err_nr_ports; |
| } |
| |
| vfio_init_group_dev(&mdev_state->vdev, &mdev->dev, &mtty_dev_ops); |
| |
| mdev_state->nr_ports = nr_ports; |
| mdev_state->irq_index = -1; |
| mdev_state->s[0].max_fifo_size = MAX_FIFO_SIZE; |
| mdev_state->s[1].max_fifo_size = MAX_FIFO_SIZE; |
| mutex_init(&mdev_state->rxtx_lock); |
| mdev_state->vconfig = kzalloc(MTTY_CONFIG_SPACE_SIZE, GFP_KERNEL); |
| |
| if (mdev_state->vconfig == NULL) { |
| ret = -ENOMEM; |
| goto err_state; |
| } |
| |
| mutex_init(&mdev_state->ops_lock); |
| mdev_state->mdev = mdev; |
| |
| mtty_create_config_space(mdev_state); |
| |
| ret = vfio_register_emulated_iommu_dev(&mdev_state->vdev); |
| if (ret) |
| goto err_vconfig; |
| dev_set_drvdata(&mdev->dev, mdev_state); |
| return 0; |
| |
| err_vconfig: |
| kfree(mdev_state->vconfig); |
| err_state: |
| vfio_uninit_group_dev(&mdev_state->vdev); |
| kfree(mdev_state); |
| err_nr_ports: |
| atomic_add(nr_ports, &mdev_avail_ports); |
| return ret; |
| } |
| |
| static void mtty_remove(struct mdev_device *mdev) |
| { |
| struct mdev_state *mdev_state = dev_get_drvdata(&mdev->dev); |
| int nr_ports = mdev_state->nr_ports; |
| |
| vfio_unregister_group_dev(&mdev_state->vdev); |
| |
| kfree(mdev_state->vconfig); |
| vfio_uninit_group_dev(&mdev_state->vdev); |
| kfree(mdev_state); |
| atomic_add(nr_ports, &mdev_avail_ports); |
| } |
| |
| static int mtty_reset(struct mdev_state *mdev_state) |
| { |
| pr_info("%s: called\n", __func__); |
| |
| return 0; |
| } |
| |
| static ssize_t mtty_read(struct vfio_device *vdev, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct mdev_state *mdev_state = |
| container_of(vdev, struct mdev_state, vdev); |
| unsigned int done = 0; |
| int ret; |
| |
| while (count) { |
| size_t filled; |
| |
| if (count >= 4 && !(*ppos % 4)) { |
| u32 val; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, false); |
| if (ret <= 0) |
| goto read_err; |
| |
| if (copy_to_user(buf, &val, sizeof(val))) |
| goto read_err; |
| |
| filled = 4; |
| } else if (count >= 2 && !(*ppos % 2)) { |
| u16 val; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, false); |
| if (ret <= 0) |
| goto read_err; |
| |
| if (copy_to_user(buf, &val, sizeof(val))) |
| goto read_err; |
| |
| filled = 2; |
| } else { |
| u8 val; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, false); |
| if (ret <= 0) |
| goto read_err; |
| |
| if (copy_to_user(buf, &val, sizeof(val))) |
| goto read_err; |
| |
| filled = 1; |
| } |
| |
| count -= filled; |
| done += filled; |
| *ppos += filled; |
| buf += filled; |
| } |
| |
| return done; |
| |
| read_err: |
| return -EFAULT; |
| } |
| |
| static ssize_t mtty_write(struct vfio_device *vdev, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| struct mdev_state *mdev_state = |
| container_of(vdev, struct mdev_state, vdev); |
| unsigned int done = 0; |
| int ret; |
| |
| while (count) { |
| size_t filled; |
| |
| if (count >= 4 && !(*ppos % 4)) { |
| u32 val; |
| |
| if (copy_from_user(&val, buf, sizeof(val))) |
| goto write_err; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, true); |
| if (ret <= 0) |
| goto write_err; |
| |
| filled = 4; |
| } else if (count >= 2 && !(*ppos % 2)) { |
| u16 val; |
| |
| if (copy_from_user(&val, buf, sizeof(val))) |
| goto write_err; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, true); |
| if (ret <= 0) |
| goto write_err; |
| |
| filled = 2; |
| } else { |
| u8 val; |
| |
| if (copy_from_user(&val, buf, sizeof(val))) |
| goto write_err; |
| |
| ret = mdev_access(mdev_state, (u8 *)&val, sizeof(val), |
| *ppos, true); |
| if (ret <= 0) |
| goto write_err; |
| |
| filled = 1; |
| } |
| count -= filled; |
| done += filled; |
| *ppos += filled; |
| buf += filled; |
| } |
| |
| return done; |
| write_err: |
| return -EFAULT; |
| } |
| |
| static int mtty_set_irqs(struct mdev_state *mdev_state, uint32_t flags, |
| unsigned int index, unsigned int start, |
| unsigned int count, void *data) |
| { |
| int ret = 0; |
| |
| mutex_lock(&mdev_state->ops_lock); |
| switch (index) { |
| case VFIO_PCI_INTX_IRQ_INDEX: |
| switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { |
| case VFIO_IRQ_SET_ACTION_MASK: |
| case VFIO_IRQ_SET_ACTION_UNMASK: |
| break; |
| case VFIO_IRQ_SET_ACTION_TRIGGER: |
| { |
| if (flags & VFIO_IRQ_SET_DATA_NONE) { |
| pr_info("%s: disable INTx\n", __func__); |
| if (mdev_state->intx_evtfd) |
| eventfd_ctx_put(mdev_state->intx_evtfd); |
| break; |
| } |
| |
| if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { |
| int fd = *(int *)data; |
| |
| if (fd > 0) { |
| struct eventfd_ctx *evt; |
| |
| evt = eventfd_ctx_fdget(fd); |
| if (IS_ERR(evt)) { |
| ret = PTR_ERR(evt); |
| break; |
| } |
| mdev_state->intx_evtfd = evt; |
| mdev_state->irq_fd = fd; |
| mdev_state->irq_index = index; |
| break; |
| } |
| } |
| break; |
| } |
| } |
| break; |
| case VFIO_PCI_MSI_IRQ_INDEX: |
| switch (flags & VFIO_IRQ_SET_ACTION_TYPE_MASK) { |
| case VFIO_IRQ_SET_ACTION_MASK: |
| case VFIO_IRQ_SET_ACTION_UNMASK: |
| break; |
| case VFIO_IRQ_SET_ACTION_TRIGGER: |
| if (flags & VFIO_IRQ_SET_DATA_NONE) { |
| if (mdev_state->msi_evtfd) |
| eventfd_ctx_put(mdev_state->msi_evtfd); |
| pr_info("%s: disable MSI\n", __func__); |
| mdev_state->irq_index = VFIO_PCI_INTX_IRQ_INDEX; |
| break; |
| } |
| if (flags & VFIO_IRQ_SET_DATA_EVENTFD) { |
| int fd = *(int *)data; |
| struct eventfd_ctx *evt; |
| |
| if (fd <= 0) |
| break; |
| |
| if (mdev_state->msi_evtfd) |
| break; |
| |
| evt = eventfd_ctx_fdget(fd); |
| if (IS_ERR(evt)) { |
| ret = PTR_ERR(evt); |
| break; |
| } |
| mdev_state->msi_evtfd = evt; |
| mdev_state->irq_fd = fd; |
| mdev_state->irq_index = index; |
| } |
| break; |
| } |
| break; |
| case VFIO_PCI_MSIX_IRQ_INDEX: |
| pr_info("%s: MSIX_IRQ\n", __func__); |
| break; |
| case VFIO_PCI_ERR_IRQ_INDEX: |
| pr_info("%s: ERR_IRQ\n", __func__); |
| break; |
| case VFIO_PCI_REQ_IRQ_INDEX: |
| pr_info("%s: REQ_IRQ\n", __func__); |
| break; |
| } |
| |
| mutex_unlock(&mdev_state->ops_lock); |
| return ret; |
| } |
| |
| static int mtty_trigger_interrupt(struct mdev_state *mdev_state) |
| { |
| int ret = -1; |
| |
| if ((mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) && |
| (!mdev_state->msi_evtfd)) |
| return -EINVAL; |
| else if ((mdev_state->irq_index == VFIO_PCI_INTX_IRQ_INDEX) && |
| (!mdev_state->intx_evtfd)) { |
| pr_info("%s: Intr eventfd not found\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (mdev_state->irq_index == VFIO_PCI_MSI_IRQ_INDEX) |
| ret = eventfd_signal(mdev_state->msi_evtfd, 1); |
| else |
| ret = eventfd_signal(mdev_state->intx_evtfd, 1); |
| |
| #if defined(DEBUG_INTR) |
| pr_info("Intx triggered\n"); |
| #endif |
| if (ret != 1) |
| pr_err("%s: eventfd signal failed (%d)\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| static int mtty_get_region_info(struct mdev_state *mdev_state, |
| struct vfio_region_info *region_info, |
| u16 *cap_type_id, void **cap_type) |
| { |
| unsigned int size = 0; |
| u32 bar_index; |
| |
| bar_index = region_info->index; |
| if (bar_index >= VFIO_PCI_NUM_REGIONS) |
| return -EINVAL; |
| |
| mutex_lock(&mdev_state->ops_lock); |
| |
| switch (bar_index) { |
| case VFIO_PCI_CONFIG_REGION_INDEX: |
| size = MTTY_CONFIG_SPACE_SIZE; |
| break; |
| case VFIO_PCI_BAR0_REGION_INDEX: |
| size = MTTY_IO_BAR_SIZE; |
| break; |
| case VFIO_PCI_BAR1_REGION_INDEX: |
| if (mdev_state->nr_ports == 2) |
| size = MTTY_IO_BAR_SIZE; |
| break; |
| default: |
| size = 0; |
| break; |
| } |
| |
| mdev_state->region_info[bar_index].size = size; |
| mdev_state->region_info[bar_index].vfio_offset = |
| MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index); |
| |
| region_info->size = size; |
| region_info->offset = MTTY_VFIO_PCI_INDEX_TO_OFFSET(bar_index); |
| region_info->flags = VFIO_REGION_INFO_FLAG_READ | |
| VFIO_REGION_INFO_FLAG_WRITE; |
| mutex_unlock(&mdev_state->ops_lock); |
| return 0; |
| } |
| |
| static int mtty_get_irq_info(struct vfio_irq_info *irq_info) |
| { |
| switch (irq_info->index) { |
| case VFIO_PCI_INTX_IRQ_INDEX: |
| case VFIO_PCI_MSI_IRQ_INDEX: |
| case VFIO_PCI_REQ_IRQ_INDEX: |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| irq_info->flags = VFIO_IRQ_INFO_EVENTFD; |
| irq_info->count = 1; |
| |
| if (irq_info->index == VFIO_PCI_INTX_IRQ_INDEX) |
| irq_info->flags |= (VFIO_IRQ_INFO_MASKABLE | |
| VFIO_IRQ_INFO_AUTOMASKED); |
| else |
| irq_info->flags |= VFIO_IRQ_INFO_NORESIZE; |
| |
| return 0; |
| } |
| |
| static int mtty_get_device_info(struct vfio_device_info *dev_info) |
| { |
| dev_info->flags = VFIO_DEVICE_FLAGS_PCI; |
| dev_info->num_regions = VFIO_PCI_NUM_REGIONS; |
| dev_info->num_irqs = VFIO_PCI_NUM_IRQS; |
| |
| return 0; |
| } |
| |
| static long mtty_ioctl(struct vfio_device *vdev, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct mdev_state *mdev_state = |
| container_of(vdev, struct mdev_state, vdev); |
| int ret = 0; |
| unsigned long minsz; |
| |
| switch (cmd) { |
| case VFIO_DEVICE_GET_INFO: |
| { |
| struct vfio_device_info info; |
| |
| minsz = offsetofend(struct vfio_device_info, num_irqs); |
| |
| if (copy_from_user(&info, (void __user *)arg, minsz)) |
| return -EFAULT; |
| |
| if (info.argsz < minsz) |
| return -EINVAL; |
| |
| ret = mtty_get_device_info(&info); |
| if (ret) |
| return ret; |
| |
| memcpy(&mdev_state->dev_info, &info, sizeof(info)); |
| |
| if (copy_to_user((void __user *)arg, &info, minsz)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| case VFIO_DEVICE_GET_REGION_INFO: |
| { |
| struct vfio_region_info info; |
| u16 cap_type_id = 0; |
| void *cap_type = NULL; |
| |
| minsz = offsetofend(struct vfio_region_info, offset); |
| |
| if (copy_from_user(&info, (void __user *)arg, minsz)) |
| return -EFAULT; |
| |
| if (info.argsz < minsz) |
| return -EINVAL; |
| |
| ret = mtty_get_region_info(mdev_state, &info, &cap_type_id, |
| &cap_type); |
| if (ret) |
| return ret; |
| |
| if (copy_to_user((void __user *)arg, &info, minsz)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| case VFIO_DEVICE_GET_IRQ_INFO: |
| { |
| struct vfio_irq_info info; |
| |
| minsz = offsetofend(struct vfio_irq_info, count); |
| |
| if (copy_from_user(&info, (void __user *)arg, minsz)) |
| return -EFAULT; |
| |
| if ((info.argsz < minsz) || |
| (info.index >= mdev_state->dev_info.num_irqs)) |
| return -EINVAL; |
| |
| ret = mtty_get_irq_info(&info); |
| if (ret) |
| return ret; |
| |
| if (copy_to_user((void __user *)arg, &info, minsz)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| case VFIO_DEVICE_SET_IRQS: |
| { |
| struct vfio_irq_set hdr; |
| u8 *data = NULL, *ptr = NULL; |
| size_t data_size = 0; |
| |
| minsz = offsetofend(struct vfio_irq_set, count); |
| |
| if (copy_from_user(&hdr, (void __user *)arg, minsz)) |
| return -EFAULT; |
| |
| ret = vfio_set_irqs_validate_and_prepare(&hdr, |
| mdev_state->dev_info.num_irqs, |
| VFIO_PCI_NUM_IRQS, |
| &data_size); |
| if (ret) |
| return ret; |
| |
| if (data_size) { |
| ptr = data = memdup_user((void __user *)(arg + minsz), |
| data_size); |
| if (IS_ERR(data)) |
| return PTR_ERR(data); |
| } |
| |
| ret = mtty_set_irqs(mdev_state, hdr.flags, hdr.index, hdr.start, |
| hdr.count, data); |
| |
| kfree(ptr); |
| return ret; |
| } |
| case VFIO_DEVICE_RESET: |
| return mtty_reset(mdev_state); |
| } |
| return -ENOTTY; |
| } |
| |
| static ssize_t |
| sample_mtty_dev_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "This is phy device\n"); |
| } |
| |
| static DEVICE_ATTR_RO(sample_mtty_dev); |
| |
| static struct attribute *mtty_dev_attrs[] = { |
| &dev_attr_sample_mtty_dev.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group mtty_dev_group = { |
| .name = "mtty_dev", |
| .attrs = mtty_dev_attrs, |
| }; |
| |
| static const struct attribute_group *mtty_dev_groups[] = { |
| &mtty_dev_group, |
| NULL, |
| }; |
| |
| static ssize_t |
| sample_mdev_dev_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| if (mdev_from_dev(dev)) |
| return sprintf(buf, "This is MDEV %s\n", dev_name(dev)); |
| |
| return sprintf(buf, "\n"); |
| } |
| |
| static DEVICE_ATTR_RO(sample_mdev_dev); |
| |
| static struct attribute *mdev_dev_attrs[] = { |
| &dev_attr_sample_mdev_dev.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group mdev_dev_group = { |
| .name = "vendor", |
| .attrs = mdev_dev_attrs, |
| }; |
| |
| static const struct attribute_group *mdev_dev_groups[] = { |
| &mdev_dev_group, |
| NULL, |
| }; |
| |
| static ssize_t name_show(struct mdev_type *mtype, |
| struct mdev_type_attribute *attr, char *buf) |
| { |
| static const char *name_str[2] = { "Single port serial", |
| "Dual port serial" }; |
| |
| return sysfs_emit(buf, "%s\n", |
| name_str[mtype_get_type_group_id(mtype)]); |
| } |
| |
| static MDEV_TYPE_ATTR_RO(name); |
| |
| static ssize_t available_instances_show(struct mdev_type *mtype, |
| struct mdev_type_attribute *attr, |
| char *buf) |
| { |
| unsigned int ports = mtype_get_type_group_id(mtype) + 1; |
| |
| return sprintf(buf, "%d\n", atomic_read(&mdev_avail_ports) / ports); |
| } |
| |
| static MDEV_TYPE_ATTR_RO(available_instances); |
| |
| static ssize_t device_api_show(struct mdev_type *mtype, |
| struct mdev_type_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%s\n", VFIO_DEVICE_API_PCI_STRING); |
| } |
| |
| static MDEV_TYPE_ATTR_RO(device_api); |
| |
| static struct attribute *mdev_types_attrs[] = { |
| &mdev_type_attr_name.attr, |
| &mdev_type_attr_device_api.attr, |
| &mdev_type_attr_available_instances.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group mdev_type_group1 = { |
| .name = "1", |
| .attrs = mdev_types_attrs, |
| }; |
| |
| static struct attribute_group mdev_type_group2 = { |
| .name = "2", |
| .attrs = mdev_types_attrs, |
| }; |
| |
| static struct attribute_group *mdev_type_groups[] = { |
| &mdev_type_group1, |
| &mdev_type_group2, |
| NULL, |
| }; |
| |
| static const struct vfio_device_ops mtty_dev_ops = { |
| .name = "vfio-mtty", |
| .read = mtty_read, |
| .write = mtty_write, |
| .ioctl = mtty_ioctl, |
| }; |
| |
| static struct mdev_driver mtty_driver = { |
| .driver = { |
| .name = "mtty", |
| .owner = THIS_MODULE, |
| .mod_name = KBUILD_MODNAME, |
| .dev_groups = mdev_dev_groups, |
| }, |
| .probe = mtty_probe, |
| .remove = mtty_remove, |
| }; |
| |
| static const struct mdev_parent_ops mdev_fops = { |
| .owner = THIS_MODULE, |
| .device_driver = &mtty_driver, |
| .dev_attr_groups = mtty_dev_groups, |
| .supported_type_groups = mdev_type_groups, |
| }; |
| |
| static void mtty_device_release(struct device *dev) |
| { |
| dev_dbg(dev, "mtty: released\n"); |
| } |
| |
| static int __init mtty_dev_init(void) |
| { |
| int ret = 0; |
| |
| pr_info("mtty_dev: %s\n", __func__); |
| |
| memset(&mtty_dev, 0, sizeof(mtty_dev)); |
| |
| idr_init(&mtty_dev.vd_idr); |
| |
| ret = alloc_chrdev_region(&mtty_dev.vd_devt, 0, MINORMASK + 1, |
| MTTY_NAME); |
| |
| if (ret < 0) { |
| pr_err("Error: failed to register mtty_dev, err:%d\n", ret); |
| return ret; |
| } |
| |
| cdev_init(&mtty_dev.vd_cdev, &vd_fops); |
| cdev_add(&mtty_dev.vd_cdev, mtty_dev.vd_devt, MINORMASK + 1); |
| |
| pr_info("major_number:%d\n", MAJOR(mtty_dev.vd_devt)); |
| |
| ret = mdev_register_driver(&mtty_driver); |
| if (ret) |
| goto err_cdev; |
| |
| mtty_dev.vd_class = class_create(THIS_MODULE, MTTY_CLASS_NAME); |
| |
| if (IS_ERR(mtty_dev.vd_class)) { |
| pr_err("Error: failed to register mtty_dev class\n"); |
| ret = PTR_ERR(mtty_dev.vd_class); |
| goto err_driver; |
| } |
| |
| mtty_dev.dev.class = mtty_dev.vd_class; |
| mtty_dev.dev.release = mtty_device_release; |
| dev_set_name(&mtty_dev.dev, "%s", MTTY_NAME); |
| |
| ret = device_register(&mtty_dev.dev); |
| if (ret) |
| goto err_class; |
| |
| ret = mdev_register_device(&mtty_dev.dev, &mdev_fops); |
| if (ret) |
| goto err_device; |
| return 0; |
| |
| err_device: |
| device_unregister(&mtty_dev.dev); |
| err_class: |
| class_destroy(mtty_dev.vd_class); |
| err_driver: |
| mdev_unregister_driver(&mtty_driver); |
| err_cdev: |
| cdev_del(&mtty_dev.vd_cdev); |
| unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK + 1); |
| return ret; |
| } |
| |
| static void __exit mtty_dev_exit(void) |
| { |
| mtty_dev.dev.bus = NULL; |
| mdev_unregister_device(&mtty_dev.dev); |
| |
| device_unregister(&mtty_dev.dev); |
| idr_destroy(&mtty_dev.vd_idr); |
| mdev_unregister_driver(&mtty_driver); |
| cdev_del(&mtty_dev.vd_cdev); |
| unregister_chrdev_region(mtty_dev.vd_devt, MINORMASK + 1); |
| class_destroy(mtty_dev.vd_class); |
| mtty_dev.vd_class = NULL; |
| pr_info("mtty_dev: Unloaded!\n"); |
| } |
| |
| module_init(mtty_dev_init) |
| module_exit(mtty_dev_exit) |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_INFO(supported, "Test driver that simulate serial port over PCI"); |
| MODULE_VERSION(VERSION_STRING); |
| MODULE_AUTHOR(DRIVER_AUTHOR); |