| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel |
| |
| maintainers: |
| - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> |
| |
| description: | |
| This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED |
| video mode panel module on MIPI-DSI 4-Lane interface, GGRB |
| pixel arrangement, 63 micrometers pitch, with an active |
| area of 68.04 x 136.08 millimeters. |
| Each pixel is divided into red and green dots, or blue and |
| green dots, and two pixels share red or blue dots which are |
| arranged in vertical stripe. |
| The DriverIC for this panel module is SW43404. |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| |
| properties: |
| compatible: |
| const: boe,bf060y8m-aj0 |
| |
| reg: |
| maxItems: 1 |
| |
| elvdd-supply: |
| description: EL Driving positive (VDD) supply (4.40-4.80V) |
| elvss-supply: |
| description: EL Driving negative (VSS) supply (-5.00V to -1.40V) |
| vcc-supply: |
| description: Core (TSP) voltage supply (2.70-3.60V) |
| vci-supply: |
| description: DriverIC Operation supply (2.60-3.60V) |
| vddio-supply: |
| description: I/O voltage supply (1.62-1.98V) |
| |
| port: true |
| reset-gpios: true |
| |
| required: |
| - compatible |
| - elvdd-supply |
| - elvss-supply |
| - vcc-supply |
| - vci-supply |
| - vddio-supply |
| - reg |
| - reset-gpios |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| panel@0 { |
| compatible = "boe,bf060y8m-aj0"; |
| reg = <0>; |
| |
| reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; |
| |
| vcc-supply = <&disp_vcc_vreg>; |
| vddio-supply = <&disp_vddio_vreg>; |
| vci-supply = <&disp_vci_vreg>; |
| elvdd-supply = <&disp_elvdd_vreg>; |
| elvss-supply = <&disp_elvss_vreg>; |
| |
| port { |
| panel_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| }; |
| }; |