| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Novatek NT35950-based display panels |
| |
| maintainers: |
| - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> |
| |
| description: | |
| The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, |
| with Static RAM for content retention in command mode and also supports |
| video mode with VESA Frame Buffer Compression or Display Stream Compression |
| on single, or dual dsi port(s). |
| This DDIC is also capable of upscaling an input image to the panel's native |
| resolution, for example it can upscale a 1920x1080 input to 3840x2160 with |
| either bilinear interpolation or pixel duplication. |
| |
| allOf: |
| - $ref: panel-common-dual.yaml# |
| |
| properties: |
| compatible: |
| items: |
| - enum: |
| - sharp,ls055d1sx04 |
| - const: novatek,nt35950 |
| description: This indicates the panel manufacturer of the panel |
| that is in turn using the NT35950 panel driver. The compatible |
| string determines how the NT35950 panel driver shall be configured |
| to work with the indicated panel. The novatek,nt35950 compatible shall |
| always be provided as a fallback. |
| |
| reg: |
| maxItems: 1 |
| |
| reset-gpios: |
| maxItems: 1 |
| description: phandle of gpio for reset line - This should be 8mA, gpio |
| can be configured using mux, pinctrl, pinctrl-names (active high) |
| |
| avdd-supply: |
| description: positive boost supply regulator |
| avee-supply: |
| description: negative boost supply regulator |
| dvdd-supply: |
| description: regulator that supplies the digital voltage |
| vddio-supply: |
| description: regulator that supplies the I/O voltage |
| |
| backlight: true |
| ports: true |
| |
| required: |
| - compatible |
| - reg |
| - reset-gpios |
| - avdd-supply |
| - avee-supply |
| - dvdd-supply |
| - vddio-supply |
| - ports |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| |
| dsi0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| panel@0 { |
| compatible = "sharp,ls055d1sx04", "novatek,nt35950"; |
| reg = <0>; |
| |
| backlight = <&pmi8998_wled>; |
| reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; |
| |
| avdd-supply = <&lab>; |
| avee-supply = <&ibb>; |
| dvdd-supply = <&disp_dvdd_vreg>; |
| vddio-supply = <&vreg_l14a_1p85>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| panel_in0: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| panel_in1: endpoint { |
| remote-endpoint = <&dsi1_out>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |