| /* |
| * MPC8572 Silicon/SoC Device Tree Source (post include) |
| * |
| * Copyright 2011 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| &lbc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; |
| interrupts = <19 2 0 0>; |
| }; |
| |
| /* controller at 0x8000 */ |
| &pci0 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupts = <24 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <24 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| /* controller at 0x9000 */ |
| &pci1 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupts = <25 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <25 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| /* controller at 0xa000 */ |
| &pci2 { |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| bus-range = <0 255>; |
| clock-frequency = <33333333>; |
| interrupts = <26 2 0 0>; |
| |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| interrupts = <26 2 0 0>; |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x0 */ |
| 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 |
| 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 |
| >; |
| }; |
| }; |
| |
| &soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| compatible = "fsl,mpc8572-immr", "simple-bus"; |
| bus-frequency = <0>; // Filled out by uboot. |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <12>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,mpc8572-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <17 2 0 0>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,mpc8572-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupts = <18 2 0 0>; |
| }; |
| |
| memory-controller@6000 { |
| compatible = "fsl,mpc8572-memory-controller"; |
| reg = <0x6000 0x1000>; |
| interrupts = <18 2 0 0>; |
| }; |
| |
| /include/ "pq3-i2c-0.dtsi" |
| /include/ "pq3-i2c-1.dtsi" |
| /include/ "pq3-duart-0.dtsi" |
| /include/ "pq3-dma-1.dtsi" |
| /include/ "pq3-gpio-0.dtsi" |
| gpio-controller@f000 { |
| compatible = "fsl,mpc8572-gpio"; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,mpc8572-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <32>; // 32 bytes |
| cache-size = <0x100000>; // L2,1M |
| interrupts = <16 2 0 0>; |
| }; |
| |
| /include/ "pq3-dma-0.dtsi" |
| /include/ "pq3-etsec1-0.dtsi" |
| /include/ "pq3-etsec1-timer-0.dtsi" |
| |
| ptp_clock@24e00 { |
| interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; |
| }; |
| |
| /include/ "pq3-etsec1-1.dtsi" |
| /include/ "pq3-etsec1-2.dtsi" |
| /include/ "pq3-etsec1-3.dtsi" |
| /include/ "pq3-sec3.0-0.dtsi" |
| /include/ "pq3-mpic.dtsi" |
| /include/ "pq3-mpic-timer-B.dtsi" |
| |
| global-utilities@e0000 { |
| compatible = "fsl,mpc8572-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| /include/ "pq3-power.dtsi" |
| }; |