| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * An hwmon driver for the Analog Devices AD7414 |
| * |
| * Copyright 2006 Stefan Roese <sr at denx.de>, DENX Software Engineering |
| * |
| * Copyright (c) 2008 PIKA Technologies |
| * Sean MacLennan <smaclennan@pikatech.com> |
| * |
| * Copyright (c) 2008 Spansion Inc. |
| * Frank Edelhaeuser <frank.edelhaeuser at spansion.com> |
| * (converted to "new style" I2C driver model, removed checkpatch.pl warnings) |
| * |
| * Based on ad7418.c |
| * Copyright 2006 Tower Technologies, Alessandro Zummo <a.zummo at towertech.it> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| #include <linux/slab.h> |
| |
| |
| /* AD7414 registers */ |
| #define AD7414_REG_TEMP 0x00 |
| #define AD7414_REG_CONF 0x01 |
| #define AD7414_REG_T_HIGH 0x02 |
| #define AD7414_REG_T_LOW 0x03 |
| |
| static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW }; |
| |
| struct ad7414_data { |
| struct i2c_client *client; |
| struct mutex lock; /* atomic read data updates */ |
| bool valid; /* true if following fields are valid */ |
| unsigned long next_update; /* In jiffies */ |
| s16 temp_input; /* Register values */ |
| s8 temps[ARRAY_SIZE(AD7414_REG_LIMIT)]; |
| }; |
| |
| /* REG: (0.25C/bit, two's complement) << 6 */ |
| static inline int ad7414_temp_from_reg(s16 reg) |
| { |
| /* |
| * use integer division instead of equivalent right shift to |
| * guarantee arithmetic shift and preserve the sign |
| */ |
| return ((int)reg / 64) * 250; |
| } |
| |
| static inline int ad7414_read(struct i2c_client *client, u8 reg) |
| { |
| if (reg == AD7414_REG_TEMP) |
| return i2c_smbus_read_word_swapped(client, reg); |
| else |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static inline int ad7414_write(struct i2c_client *client, u8 reg, u8 value) |
| { |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static struct ad7414_data *ad7414_update_device(struct device *dev) |
| { |
| struct ad7414_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| |
| mutex_lock(&data->lock); |
| |
| if (time_after(jiffies, data->next_update) || !data->valid) { |
| int value, i; |
| |
| dev_dbg(&client->dev, "starting ad7414 update\n"); |
| |
| value = ad7414_read(client, AD7414_REG_TEMP); |
| if (value < 0) |
| dev_dbg(&client->dev, "AD7414_REG_TEMP err %d\n", |
| value); |
| else |
| data->temp_input = value; |
| |
| for (i = 0; i < ARRAY_SIZE(AD7414_REG_LIMIT); ++i) { |
| value = ad7414_read(client, AD7414_REG_LIMIT[i]); |
| if (value < 0) |
| dev_dbg(&client->dev, "AD7414 reg %d err %d\n", |
| AD7414_REG_LIMIT[i], value); |
| else |
| data->temps[i] = value; |
| } |
| |
| data->next_update = jiffies + HZ + HZ / 2; |
| data->valid = true; |
| } |
| |
| mutex_unlock(&data->lock); |
| |
| return data; |
| } |
| |
| static ssize_t temp_input_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct ad7414_data *data = ad7414_update_device(dev); |
| return sprintf(buf, "%d\n", ad7414_temp_from_reg(data->temp_input)); |
| } |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); |
| |
| static ssize_t max_min_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int index = to_sensor_dev_attr(attr)->index; |
| struct ad7414_data *data = ad7414_update_device(dev); |
| return sprintf(buf, "%d\n", data->temps[index] * 1000); |
| } |
| |
| static ssize_t max_min_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct ad7414_data *data = dev_get_drvdata(dev); |
| struct i2c_client *client = data->client; |
| int index = to_sensor_dev_attr(attr)->index; |
| u8 reg = AD7414_REG_LIMIT[index]; |
| long temp; |
| int ret = kstrtol(buf, 10, &temp); |
| |
| if (ret < 0) |
| return ret; |
| |
| temp = clamp_val(temp, -40000, 85000); |
| temp = (temp + (temp < 0 ? -500 : 500)) / 1000; |
| |
| mutex_lock(&data->lock); |
| data->temps[index] = temp; |
| ad7414_write(client, reg, temp); |
| mutex_unlock(&data->lock); |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RW(temp1_max, max_min, 0); |
| static SENSOR_DEVICE_ATTR_RW(temp1_min, max_min, 1); |
| |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| int bitnr = to_sensor_dev_attr(attr)->index; |
| struct ad7414_data *data = ad7414_update_device(dev); |
| int value = (data->temp_input >> bitnr) & 1; |
| return sprintf(buf, "%d\n", value); |
| } |
| |
| static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 3); |
| static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 4); |
| |
| static struct attribute *ad7414_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_max.dev_attr.attr, |
| &sensor_dev_attr_temp1_min.dev_attr.attr, |
| &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, |
| NULL |
| }; |
| |
| ATTRIBUTE_GROUPS(ad7414); |
| |
| static int ad7414_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct ad7414_data *data; |
| struct device *hwmon_dev; |
| int conf; |
| |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | |
| I2C_FUNC_SMBUS_READ_WORD_DATA)) |
| return -EOPNOTSUPP; |
| |
| data = devm_kzalloc(dev, sizeof(struct ad7414_data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| data->client = client; |
| mutex_init(&data->lock); |
| |
| dev_info(&client->dev, "chip found\n"); |
| |
| /* Make sure the chip is powered up. */ |
| conf = i2c_smbus_read_byte_data(client, AD7414_REG_CONF); |
| if (conf < 0) |
| dev_warn(dev, "ad7414_probe unable to read config register.\n"); |
| else { |
| conf &= ~(1 << 7); |
| i2c_smbus_write_byte_data(client, AD7414_REG_CONF, conf); |
| } |
| |
| hwmon_dev = devm_hwmon_device_register_with_groups(dev, |
| client->name, |
| data, ad7414_groups); |
| return PTR_ERR_OR_ZERO(hwmon_dev); |
| } |
| |
| static const struct i2c_device_id ad7414_id[] = { |
| { "ad7414" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, ad7414_id); |
| |
| static const struct of_device_id __maybe_unused ad7414_of_match[] = { |
| { .compatible = "ad,ad7414" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ad7414_of_match); |
| |
| static struct i2c_driver ad7414_driver = { |
| .driver = { |
| .name = "ad7414", |
| .of_match_table = of_match_ptr(ad7414_of_match), |
| }, |
| .probe = ad7414_probe, |
| .id_table = ad7414_id, |
| }; |
| |
| module_i2c_driver(ad7414_driver); |
| |
| MODULE_AUTHOR("Stefan Roese <sr at denx.de>, " |
| "Frank Edelhaeuser <frank.edelhaeuser at spansion.com>"); |
| |
| MODULE_DESCRIPTION("AD7414 driver"); |
| MODULE_LICENSE("GPL"); |