| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ADMFM2000 Dual Microwave Down Converter |
| * |
| * Copyright 2024 Analog Devices Inc. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| |
| #define ADMFM2000_MIXER_MODE 0 |
| #define ADMFM2000_DIRECT_IF_MODE 1 |
| #define ADMFM2000_DSA_GPIOS 5 |
| #define ADMFM2000_MODE_GPIOS 2 |
| #define ADMFM2000_MAX_GAIN 0 |
| #define ADMFM2000_MIN_GAIN -31000 |
| #define ADMFM2000_DEFAULT_GAIN -0x20 |
| |
| struct admfm2000_state { |
| struct mutex lock; /* protect sensor state */ |
| struct gpio_desc *sw1_ch[2]; |
| struct gpio_desc *sw2_ch[2]; |
| struct gpio_desc *dsa1_gpios[5]; |
| struct gpio_desc *dsa2_gpios[5]; |
| u32 gain[2]; |
| }; |
| |
| static int admfm2000_mode(struct iio_dev *indio_dev, u32 chan, u32 mode) |
| { |
| struct admfm2000_state *st = iio_priv(indio_dev); |
| int i; |
| |
| switch (mode) { |
| case ADMFM2000_MIXER_MODE: |
| for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { |
| gpiod_set_value_cansleep(st->sw1_ch[i], (chan == 0) ? 1 : 0); |
| gpiod_set_value_cansleep(st->sw2_ch[i], (chan == 0) ? 0 : 1); |
| } |
| return 0; |
| case ADMFM2000_DIRECT_IF_MODE: |
| for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { |
| gpiod_set_value_cansleep(st->sw1_ch[i], (chan == 0) ? 0 : 1); |
| gpiod_set_value_cansleep(st->sw2_ch[i], (chan == 0) ? 1 : 0); |
| } |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int admfm2000_attenuation(struct iio_dev *indio_dev, u32 chan, u32 value) |
| { |
| struct admfm2000_state *st = iio_priv(indio_dev); |
| int i; |
| |
| switch (chan) { |
| case 0: |
| for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) |
| gpiod_set_value_cansleep(st->dsa1_gpios[i], value & (1 << i)); |
| return 0; |
| case 1: |
| for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) |
| gpiod_set_value_cansleep(st->dsa2_gpios[i], value & (1 << i)); |
| return 0; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int admfm2000_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long mask) |
| { |
| struct admfm2000_state *st = iio_priv(indio_dev); |
| int gain; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| mutex_lock(&st->lock); |
| gain = ~(st->gain[chan->channel]) * -1000; |
| *val = gain / 1000; |
| *val2 = (gain % 1000) * 1000; |
| mutex_unlock(&st->lock); |
| |
| return IIO_VAL_INT_PLUS_MICRO_DB; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int admfm2000_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long mask) |
| { |
| struct admfm2000_state *st = iio_priv(indio_dev); |
| int gain, ret; |
| |
| if (val < 0) |
| gain = (val * 1000) - (val2 / 1000); |
| else |
| gain = (val * 1000) + (val2 / 1000); |
| |
| if (gain > ADMFM2000_MAX_GAIN || gain < ADMFM2000_MIN_GAIN) |
| return -EINVAL; |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| mutex_lock(&st->lock); |
| st->gain[chan->channel] = ~((abs(gain) / 1000) & 0x1F); |
| |
| ret = admfm2000_attenuation(indio_dev, chan->channel, |
| st->gain[chan->channel]); |
| mutex_unlock(&st->lock); |
| return ret; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int admfm2000_write_raw_get_fmt(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| long mask) |
| { |
| switch (mask) { |
| case IIO_CHAN_INFO_HARDWAREGAIN: |
| return IIO_VAL_INT_PLUS_MICRO_DB; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static const struct iio_info admfm2000_info = { |
| .read_raw = &admfm2000_read_raw, |
| .write_raw = &admfm2000_write_raw, |
| .write_raw_get_fmt = &admfm2000_write_raw_get_fmt, |
| }; |
| |
| #define ADMFM2000_CHAN(_channel) { \ |
| .type = IIO_VOLTAGE, \ |
| .output = 1, \ |
| .indexed = 1, \ |
| .channel = _channel, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ |
| } |
| |
| static const struct iio_chan_spec admfm2000_channels[] = { |
| ADMFM2000_CHAN(0), |
| ADMFM2000_CHAN(1), |
| }; |
| |
| static int admfm2000_channel_config(struct admfm2000_state *st, |
| struct iio_dev *indio_dev) |
| { |
| struct platform_device *pdev = to_platform_device(indio_dev->dev.parent); |
| struct device *dev = &pdev->dev; |
| struct gpio_desc **dsa; |
| struct gpio_desc **sw; |
| int ret, i; |
| bool mode; |
| u32 reg; |
| |
| device_for_each_child_node_scoped(dev, child) { |
| ret = fwnode_property_read_u32(child, "reg", ®); |
| if (ret) |
| return dev_err_probe(dev, ret, |
| "Failed to get reg property\n"); |
| |
| if (reg >= indio_dev->num_channels) |
| return dev_err_probe(dev, -EINVAL, "reg bigger than: %d\n", |
| indio_dev->num_channels); |
| |
| if (fwnode_property_present(child, "adi,mixer-mode")) |
| mode = ADMFM2000_MIXER_MODE; |
| else |
| mode = ADMFM2000_DIRECT_IF_MODE; |
| |
| switch (reg) { |
| case 0: |
| sw = st->sw1_ch; |
| dsa = st->dsa1_gpios; |
| break; |
| case 1: |
| sw = st->sw2_ch; |
| dsa = st->dsa2_gpios; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < ADMFM2000_MODE_GPIOS; i++) { |
| sw[i] = devm_fwnode_gpiod_get_index(dev, child, "switch", |
| i, GPIOD_OUT_LOW, NULL); |
| if (IS_ERR(sw[i])) |
| return dev_err_probe(dev, PTR_ERR(sw[i]), |
| "Failed to get gpios\n"); |
| } |
| |
| for (i = 0; i < ADMFM2000_DSA_GPIOS; i++) { |
| dsa[i] = devm_fwnode_gpiod_get_index(dev, child, |
| "attenuation", i, |
| GPIOD_OUT_LOW, NULL); |
| if (IS_ERR(dsa[i])) |
| return dev_err_probe(dev, PTR_ERR(dsa[i]), |
| "Failed to get gpios\n"); |
| } |
| |
| ret = admfm2000_mode(indio_dev, reg, mode); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int admfm2000_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct admfm2000_state *st; |
| struct iio_dev *indio_dev; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| |
| indio_dev->name = "admfm2000"; |
| indio_dev->num_channels = ARRAY_SIZE(admfm2000_channels); |
| indio_dev->channels = admfm2000_channels; |
| indio_dev->info = &admfm2000_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| |
| st->gain[0] = ADMFM2000_DEFAULT_GAIN; |
| st->gain[1] = ADMFM2000_DEFAULT_GAIN; |
| |
| mutex_init(&st->lock); |
| |
| ret = admfm2000_channel_config(st, indio_dev); |
| if (ret) |
| return ret; |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static const struct of_device_id admfm2000_of_match[] = { |
| { .compatible = "adi,admfm2000" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, admfm2000_of_match); |
| |
| static struct platform_driver admfm2000_driver = { |
| .driver = { |
| .name = "admfm2000", |
| .of_match_table = admfm2000_of_match, |
| }, |
| .probe = admfm2000_probe, |
| }; |
| module_platform_driver(admfm2000_driver); |
| |
| MODULE_AUTHOR("Kim Seer Paller <kimseer.paller@analog.com>"); |
| MODULE_DESCRIPTION("ADMFM2000 Dual Microwave Down Converter"); |
| MODULE_LICENSE("GPL"); |