| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (C) 2018 Spreadtrum Communications Inc. |
| |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| /* PMIC global control register definition */ |
| #define SC27XX_MODULE_EN0 0xc08 |
| #define SC27XX_CLK_EN0 0xc18 |
| #define SC27XX_RGB_CTRL 0xebc |
| |
| #define SC27XX_BLTC_EN BIT(9) |
| #define SC27XX_RTC_EN BIT(7) |
| #define SC27XX_RGB_PD BIT(0) |
| |
| /* Breathing light controller register definition */ |
| #define SC27XX_LEDS_CTRL 0x00 |
| #define SC27XX_LEDS_PRESCALE 0x04 |
| #define SC27XX_LEDS_DUTY 0x08 |
| #define SC27XX_LEDS_CURVE0 0x0c |
| #define SC27XX_LEDS_CURVE1 0x10 |
| |
| #define SC27XX_CTRL_SHIFT 4 |
| #define SC27XX_LED_RUN BIT(0) |
| #define SC27XX_LED_TYPE BIT(1) |
| |
| #define SC27XX_DUTY_SHIFT 8 |
| #define SC27XX_DUTY_MASK GENMASK(15, 0) |
| #define SC27XX_MOD_MASK GENMASK(7, 0) |
| |
| #define SC27XX_CURVE_SHIFT 8 |
| #define SC27XX_CURVE_L_MASK GENMASK(7, 0) |
| #define SC27XX_CURVE_H_MASK GENMASK(15, 8) |
| |
| #define SC27XX_LEDS_OFFSET 0x10 |
| #define SC27XX_LEDS_MAX 3 |
| #define SC27XX_LEDS_PATTERN_CNT 4 |
| /* Stage duration step, in milliseconds */ |
| #define SC27XX_LEDS_STEP 125 |
| /* Minimum and maximum duration, in milliseconds */ |
| #define SC27XX_DELTA_T_MIN SC27XX_LEDS_STEP |
| #define SC27XX_DELTA_T_MAX (SC27XX_LEDS_STEP * 255) |
| |
| struct sc27xx_led { |
| struct fwnode_handle *fwnode; |
| struct led_classdev ldev; |
| struct sc27xx_led_priv *priv; |
| u8 line; |
| bool active; |
| }; |
| |
| struct sc27xx_led_priv { |
| struct sc27xx_led leds[SC27XX_LEDS_MAX]; |
| struct regmap *regmap; |
| struct mutex lock; |
| u32 base; |
| }; |
| |
| #define to_sc27xx_led(ldev) \ |
| container_of(ldev, struct sc27xx_led, ldev) |
| |
| static int sc27xx_led_init(struct regmap *regmap) |
| { |
| int err; |
| |
| err = regmap_update_bits(regmap, SC27XX_MODULE_EN0, SC27XX_BLTC_EN, |
| SC27XX_BLTC_EN); |
| if (err) |
| return err; |
| |
| err = regmap_update_bits(regmap, SC27XX_CLK_EN0, SC27XX_RTC_EN, |
| SC27XX_RTC_EN); |
| if (err) |
| return err; |
| |
| return regmap_update_bits(regmap, SC27XX_RGB_CTRL, SC27XX_RGB_PD, 0); |
| } |
| |
| static u32 sc27xx_led_get_offset(struct sc27xx_led *leds) |
| { |
| return leds->priv->base + SC27XX_LEDS_OFFSET * leds->line; |
| } |
| |
| static int sc27xx_led_enable(struct sc27xx_led *leds, enum led_brightness value) |
| { |
| u32 base = sc27xx_led_get_offset(leds); |
| u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL; |
| u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line; |
| struct regmap *regmap = leds->priv->regmap; |
| int err; |
| |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY, |
| SC27XX_DUTY_MASK, |
| (value << SC27XX_DUTY_SHIFT) | |
| SC27XX_MOD_MASK); |
| if (err) |
| return err; |
| |
| return regmap_update_bits(regmap, ctrl_base, |
| (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, |
| (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift); |
| } |
| |
| static int sc27xx_led_disable(struct sc27xx_led *leds) |
| { |
| struct regmap *regmap = leds->priv->regmap; |
| u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL; |
| u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line; |
| |
| return regmap_update_bits(regmap, ctrl_base, |
| (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0); |
| } |
| |
| static int sc27xx_led_set(struct led_classdev *ldev, enum led_brightness value) |
| { |
| struct sc27xx_led *leds = to_sc27xx_led(ldev); |
| int err; |
| |
| mutex_lock(&leds->priv->lock); |
| |
| if (value == LED_OFF) |
| err = sc27xx_led_disable(leds); |
| else |
| err = sc27xx_led_enable(leds, value); |
| |
| mutex_unlock(&leds->priv->lock); |
| |
| return err; |
| } |
| |
| static void sc27xx_led_clamp_align_delta_t(u32 *delta_t) |
| { |
| u32 v, offset, t = *delta_t; |
| |
| v = t + SC27XX_LEDS_STEP / 2; |
| v = clamp_t(u32, v, SC27XX_DELTA_T_MIN, SC27XX_DELTA_T_MAX); |
| offset = v - SC27XX_DELTA_T_MIN; |
| offset = SC27XX_LEDS_STEP * (offset / SC27XX_LEDS_STEP); |
| |
| *delta_t = SC27XX_DELTA_T_MIN + offset; |
| } |
| |
| static int sc27xx_led_pattern_clear(struct led_classdev *ldev) |
| { |
| struct sc27xx_led *leds = to_sc27xx_led(ldev); |
| struct regmap *regmap = leds->priv->regmap; |
| u32 base = sc27xx_led_get_offset(leds); |
| u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL; |
| u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line; |
| int err; |
| |
| mutex_lock(&leds->priv->lock); |
| |
| /* Reset the rise, high, fall and low time to zero. */ |
| regmap_write(regmap, base + SC27XX_LEDS_CURVE0, 0); |
| regmap_write(regmap, base + SC27XX_LEDS_CURVE1, 0); |
| |
| err = regmap_update_bits(regmap, ctrl_base, |
| (SC27XX_LED_RUN | SC27XX_LED_TYPE) << ctrl_shift, 0); |
| |
| ldev->brightness = LED_OFF; |
| |
| mutex_unlock(&leds->priv->lock); |
| |
| return err; |
| } |
| |
| static int sc27xx_led_pattern_set(struct led_classdev *ldev, |
| struct led_pattern *pattern, |
| u32 len, int repeat) |
| { |
| struct sc27xx_led *leds = to_sc27xx_led(ldev); |
| u32 base = sc27xx_led_get_offset(leds); |
| u32 ctrl_base = leds->priv->base + SC27XX_LEDS_CTRL; |
| u8 ctrl_shift = SC27XX_CTRL_SHIFT * leds->line; |
| struct regmap *regmap = leds->priv->regmap; |
| int err; |
| |
| /* |
| * Must contain 4 tuples to configure the rise time, high time, fall |
| * time and low time to enable the breathing mode. |
| */ |
| if (len != SC27XX_LEDS_PATTERN_CNT) |
| return -EINVAL; |
| |
| mutex_lock(&leds->priv->lock); |
| |
| sc27xx_led_clamp_align_delta_t(&pattern[0].delta_t); |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0, |
| SC27XX_CURVE_L_MASK, |
| pattern[0].delta_t / SC27XX_LEDS_STEP); |
| if (err) |
| goto out; |
| |
| sc27xx_led_clamp_align_delta_t(&pattern[1].delta_t); |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1, |
| SC27XX_CURVE_L_MASK, |
| pattern[1].delta_t / SC27XX_LEDS_STEP); |
| if (err) |
| goto out; |
| |
| sc27xx_led_clamp_align_delta_t(&pattern[2].delta_t); |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE0, |
| SC27XX_CURVE_H_MASK, |
| (pattern[2].delta_t / SC27XX_LEDS_STEP) << |
| SC27XX_CURVE_SHIFT); |
| if (err) |
| goto out; |
| |
| sc27xx_led_clamp_align_delta_t(&pattern[3].delta_t); |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_CURVE1, |
| SC27XX_CURVE_H_MASK, |
| (pattern[3].delta_t / SC27XX_LEDS_STEP) << |
| SC27XX_CURVE_SHIFT); |
| if (err) |
| goto out; |
| |
| err = regmap_update_bits(regmap, base + SC27XX_LEDS_DUTY, |
| SC27XX_DUTY_MASK, |
| (pattern[1].brightness << SC27XX_DUTY_SHIFT) | |
| SC27XX_MOD_MASK); |
| if (err) |
| goto out; |
| |
| /* Enable the LED breathing mode */ |
| err = regmap_update_bits(regmap, ctrl_base, |
| SC27XX_LED_RUN << ctrl_shift, |
| SC27XX_LED_RUN << ctrl_shift); |
| if (!err) |
| ldev->brightness = pattern[1].brightness; |
| |
| out: |
| mutex_unlock(&leds->priv->lock); |
| |
| return err; |
| } |
| |
| static int sc27xx_led_register(struct device *dev, struct sc27xx_led_priv *priv) |
| { |
| int i, err; |
| |
| err = sc27xx_led_init(priv->regmap); |
| if (err) |
| return err; |
| |
| for (i = 0; i < SC27XX_LEDS_MAX; i++) { |
| struct sc27xx_led *led = &priv->leds[i]; |
| struct led_init_data init_data = {}; |
| |
| if (!led->active) |
| continue; |
| |
| led->line = i; |
| led->priv = priv; |
| led->ldev.brightness_set_blocking = sc27xx_led_set; |
| led->ldev.pattern_set = sc27xx_led_pattern_set; |
| led->ldev.pattern_clear = sc27xx_led_pattern_clear; |
| led->ldev.default_trigger = "pattern"; |
| |
| init_data.fwnode = led->fwnode; |
| init_data.devicename = "sc27xx"; |
| init_data.default_label = ":"; |
| |
| err = devm_led_classdev_register_ext(dev, &led->ldev, |
| &init_data); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int sc27xx_led_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev_of_node(dev); |
| struct sc27xx_led_priv *priv; |
| u32 base, count, reg; |
| int err; |
| |
| count = of_get_available_child_count(np); |
| if (!count || count > SC27XX_LEDS_MAX) |
| return -EINVAL; |
| |
| err = of_property_read_u32(np, "reg", &base); |
| if (err) { |
| dev_err(dev, "fail to get reg of property\n"); |
| return err; |
| } |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, priv); |
| priv->base = base; |
| priv->regmap = dev_get_regmap(dev->parent, NULL); |
| if (!priv->regmap) { |
| err = -ENODEV; |
| dev_err(dev, "failed to get regmap: %d\n", err); |
| return err; |
| } |
| |
| for_each_available_child_of_node_scoped(np, child) { |
| err = of_property_read_u32(child, "reg", ®); |
| if (err) |
| return err; |
| |
| if (reg >= SC27XX_LEDS_MAX || priv->leds[reg].active) |
| return -EINVAL; |
| |
| priv->leds[reg].fwnode = of_fwnode_handle(child); |
| priv->leds[reg].active = true; |
| } |
| |
| mutex_init(&priv->lock); |
| |
| err = sc27xx_led_register(dev, priv); |
| if (err) |
| mutex_destroy(&priv->lock); |
| |
| return err; |
| } |
| |
| static void sc27xx_led_remove(struct platform_device *pdev) |
| { |
| struct sc27xx_led_priv *priv = platform_get_drvdata(pdev); |
| |
| mutex_destroy(&priv->lock); |
| } |
| |
| static const struct of_device_id sc27xx_led_of_match[] = { |
| { .compatible = "sprd,sc2731-bltc", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, sc27xx_led_of_match); |
| |
| static struct platform_driver sc27xx_led_driver = { |
| .driver = { |
| .name = "sprd-bltc", |
| .of_match_table = sc27xx_led_of_match, |
| }, |
| .probe = sc27xx_led_probe, |
| .remove_new = sc27xx_led_remove, |
| }; |
| |
| module_platform_driver(sc27xx_led_driver); |
| |
| MODULE_DESCRIPTION("Spreadtrum SC27xx breathing light controller driver"); |
| MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>"); |
| MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>"); |
| MODULE_LICENSE("GPL v2"); |