| #!/usr/bin/env python3 |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| """ |
| Tests for the netdev netlink family. |
| """ |
| |
| import errno |
| from os import system |
| from lib.py import ksft_run, ksft_exit |
| from lib.py import ksft_eq, ksft_ge, ksft_ne, ksft_raises, ksft_busy_wait |
| from lib.py import NetdevFamily, NetdevSimDev, NlError, defer, ip |
| |
| |
| def empty_check(nf) -> None: |
| devs = nf.dev_get({}, dump=True) |
| ksft_ge(len(devs), 1) |
| |
| |
| def lo_check(nf) -> None: |
| lo_info = nf.dev_get({"ifindex": 1}) |
| ksft_eq(len(lo_info['xdp-features']), 0) |
| ksft_eq(len(lo_info['xdp-rx-metadata-features']), 0) |
| |
| |
| def dev_dump_reject_attr(nf) -> None: |
| """Test that dev-get dump rejects attributes (no dump request policy).""" |
| with ksft_raises(NlError) as cm: |
| nf.dev_get({'ifindex': 1}, dump=True) |
| ksft_eq(cm.exception.nl_msg.error, -errno.EINVAL) |
| ksft_eq(cm.exception.nl_msg.extack['msg'], 'Unknown attribute type') |
| ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.ifindex') |
| |
| |
| def napi_list_check(nf) -> None: |
| with NetdevSimDev(queue_count=100) as nsimdev: |
| nsim = nsimdev.nsims[0] |
| |
| ip(f"link set dev {nsim.ifname} up") |
| |
| napis = nf.napi_get({'ifindex': nsim.ifindex}, dump=True) |
| ksft_eq(len(napis), 100) |
| |
| for q in [50, 0, 99]: |
| for i in range(4): |
| nsim.dfs_write("queue_reset", f"{q} {i}") |
| napis = nf.napi_get({'ifindex': nsim.ifindex}, dump=True) |
| ksft_eq(len(napis), 100, |
| comment=f"queue count after reset queue {q} mode {i}") |
| |
| def napi_set_threaded(nf) -> None: |
| """ |
| Test that verifies various cases of napi threaded |
| set and unset at napi and device level. |
| """ |
| with NetdevSimDev(queue_count=2) as nsimdev: |
| nsim = nsimdev.nsims[0] |
| |
| ip(f"link set dev {nsim.ifname} up") |
| |
| napis = nf.napi_get({'ifindex': nsim.ifindex}, dump=True) |
| ksft_eq(len(napis), 2) |
| |
| napi0_id = napis[0]['id'] |
| napi1_id = napis[1]['id'] |
| |
| # set napi threaded and verify |
| nf.napi_set({'id': napi0_id, 'threaded': "enabled"}) |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "enabled") |
| ksft_ne(napi0.get('pid'), None) |
| |
| # check it is not set for napi1 |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "disabled") |
| ksft_eq(napi1.get('pid'), None) |
| |
| ip(f"link set dev {nsim.ifname} down") |
| ip(f"link set dev {nsim.ifname} up") |
| |
| # verify if napi threaded is still set |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "enabled") |
| ksft_ne(napi0.get('pid'), None) |
| |
| # check it is still not set for napi1 |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "disabled") |
| ksft_eq(napi1.get('pid'), None) |
| |
| # unset napi threaded and verify |
| nf.napi_set({'id': napi0_id, 'threaded': "disabled"}) |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "disabled") |
| ksft_eq(napi0.get('pid'), None) |
| |
| # set threaded at device level |
| system(f"echo 1 > /sys/class/net/{nsim.ifname}/threaded") |
| |
| # check napi threaded is set for both napis |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "enabled") |
| ksft_ne(napi0.get('pid'), None) |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "enabled") |
| ksft_ne(napi1.get('pid'), None) |
| |
| # unset threaded at device level |
| system(f"echo 0 > /sys/class/net/{nsim.ifname}/threaded") |
| |
| # check napi threaded is unset for both napis |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "disabled") |
| ksft_eq(napi0.get('pid'), None) |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "disabled") |
| ksft_eq(napi1.get('pid'), None) |
| |
| # set napi threaded for napi0 |
| nf.napi_set({'id': napi0_id, 'threaded': 1}) |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "enabled") |
| ksft_ne(napi0.get('pid'), None) |
| |
| # unset threaded at device level |
| system(f"echo 0 > /sys/class/net/{nsim.ifname}/threaded") |
| |
| # check napi threaded is unset for both napis |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "disabled") |
| ksft_eq(napi0.get('pid'), None) |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "disabled") |
| ksft_eq(napi1.get('pid'), None) |
| |
| def dev_set_threaded(nf) -> None: |
| """ |
| Test that verifies various cases of napi threaded |
| set and unset at device level using sysfs. |
| """ |
| with NetdevSimDev(queue_count=2) as nsimdev: |
| nsim = nsimdev.nsims[0] |
| |
| ip(f"link set dev {nsim.ifname} up") |
| |
| napis = nf.napi_get({'ifindex': nsim.ifindex}, dump=True) |
| ksft_eq(len(napis), 2) |
| |
| napi0_id = napis[0]['id'] |
| napi1_id = napis[1]['id'] |
| |
| # set threaded |
| system(f"echo 1 > /sys/class/net/{nsim.ifname}/threaded") |
| |
| # check napi threaded is set for both napis |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "enabled") |
| ksft_ne(napi0.get('pid'), None) |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "enabled") |
| ksft_ne(napi1.get('pid'), None) |
| |
| # unset threaded |
| system(f"echo 0 > /sys/class/net/{nsim.ifname}/threaded") |
| |
| # check napi threaded is unset for both napis |
| napi0 = nf.napi_get({'id': napi0_id}) |
| ksft_eq(napi0['threaded'], "disabled") |
| ksft_eq(napi0.get('pid'), None) |
| napi1 = nf.napi_get({'id': napi1_id}) |
| ksft_eq(napi1['threaded'], "disabled") |
| ksft_eq(napi1.get('pid'), None) |
| |
| def nsim_rxq_reset_down(nf) -> None: |
| """ |
| Test that the queue API supports resetting a queue |
| while the interface is down. We should convert this |
| test to testing real HW once more devices support |
| queue API. |
| """ |
| with NetdevSimDev(queue_count=4) as nsimdev: |
| nsim = nsimdev.nsims[0] |
| |
| ip(f"link set dev {nsim.ifname} down") |
| for i in [0, 2, 3]: |
| nsim.dfs_write("queue_reset", f"1 {i}") |
| |
| |
| def page_pool_check(nf) -> None: |
| with NetdevSimDev() as nsimdev: |
| nsim = nsimdev.nsims[0] |
| |
| def up(): |
| ip(f"link set dev {nsim.ifname} up") |
| |
| def down(): |
| ip(f"link set dev {nsim.ifname} down") |
| |
| def get_pp(): |
| pp_list = nf.page_pool_get({}, dump=True) |
| return [pp for pp in pp_list if pp.get("ifindex") == nsim.ifindex] |
| |
| # No page pools when down |
| down() |
| ksft_eq(len(get_pp()), 0) |
| |
| # Up, empty page pool appears |
| up() |
| pp_list = get_pp() |
| ksft_ge(len(pp_list), 0) |
| refs = sum([pp["inflight"] for pp in pp_list]) |
| ksft_eq(refs, 0) |
| |
| # Down, it disappears, again |
| down() |
| pp_list = get_pp() |
| ksft_eq(len(pp_list), 0) |
| |
| # Up, allocate a page |
| up() |
| nsim.dfs_write("pp_hold", "y") |
| pp_list = nf.page_pool_get({}, dump=True) |
| refs = sum([pp["inflight"] for pp in pp_list if pp.get("ifindex") == nsim.ifindex]) |
| ksft_ge(refs, 1) |
| |
| # Now let's leak a page |
| down() |
| pp_list = get_pp() |
| ksft_eq(len(pp_list), 1) |
| refs = sum([pp["inflight"] for pp in pp_list]) |
| ksft_eq(refs, 1) |
| attached = [pp for pp in pp_list if "detach-time" not in pp] |
| ksft_eq(len(attached), 0) |
| |
| # New pp can get created, and we'll have two |
| up() |
| pp_list = get_pp() |
| attached = [pp for pp in pp_list if "detach-time" not in pp] |
| detached = [pp for pp in pp_list if "detach-time" in pp] |
| ksft_eq(len(attached), 1) |
| ksft_eq(len(detached), 1) |
| |
| # Free the old page and the old pp is gone |
| nsim.dfs_write("pp_hold", "n") |
| # Freeing check is once a second so we may need to retry |
| ksft_busy_wait(lambda: len(get_pp()) == 1, deadline=2) |
| |
| # And down... |
| down() |
| ksft_eq(len(get_pp()), 0) |
| |
| # Last, leave the page hanging for destroy, nothing to check |
| # we're trying to exercise the orphaning path in the kernel |
| up() |
| nsim.dfs_write("pp_hold", "y") |
| |
| |
| def page_pool_dump_ifindex(nf) -> None: |
| """Test page pool dump filtering by ifindex.""" |
| nsimdev1 = NetdevSimDev(queue_count=3) |
| rm_nsim1 = defer(nsimdev1.remove) |
| nsimdev2 = NetdevSimDev(queue_count=5) |
| defer(nsimdev2.remove) |
| |
| nsim1 = nsimdev1.nsims[0] |
| nsim2 = nsimdev2.nsims[0] |
| |
| ip(f"link set dev {nsim1.ifname} up") |
| ip(f"link set dev {nsim2.ifname} up") |
| |
| # Unfiltered dump should have pools from both devices |
| all_pp = nf.page_pool_get({}, dump=True) |
| pp1_all = [pp for pp in all_pp |
| if pp.get("ifindex") == nsim1.ifindex] |
| pp2_all = [pp for pp in all_pp |
| if pp.get("ifindex") == nsim2.ifindex] |
| ksft_ge(len(pp1_all), 1) |
| ksft_ge(len(pp2_all), 1) |
| |
| # Filtered dump should only return pools for that device |
| pp1_flt = nf.page_pool_get({'ifindex': nsim1.ifindex}, dump=True) |
| ksft_eq(pp1_flt, pp1_all) |
| |
| pp2_flt = nf.page_pool_get({'ifindex': nsim2.ifindex}, dump=True) |
| ksft_eq(pp2_flt, pp2_all) |
| |
| # Non-existent ifindex should return empty dump |
| pp_none = nf.page_pool_get({'ifindex': 12345678}, dump=True) |
| ksft_eq(len(pp_none), 0) |
| |
| # Device down - no pools for that ifindex |
| ip(f"link set dev {nsim1.ifname} down") |
| pp1_down = nf.page_pool_get({'ifindex': nsim1.ifindex}, dump=True) |
| ksft_eq(len(pp1_down), 0) |
| |
| # Remove device, dump by its old ifindex should return empty |
| old_ifindex = nsim1.ifindex |
| rm_nsim1.exec() |
| pp1_gone = nf.page_pool_get({'ifindex': old_ifindex}, dump=True) |
| ksft_eq(len(pp1_gone), 0) |
| |
| |
| def page_pool_ifindex_leak_check(nf) -> None: |
| """Test that zombie page pools don't show up under the original ifindex.""" |
| nsimdev = NetdevSimDev() |
| rm_nsim = defer(nsimdev.remove) |
| nsim = nsimdev.nsims[0] |
| |
| ip(f"link set dev {nsim.ifname} up") |
| nsim.dfs_write("pp_hold", "y") |
| |
| pp_up = nf.page_pool_get({'ifindex': nsim.ifindex}, dump=True) |
| ksft_ge(len(pp_up), 1) |
| |
| # Remove device with leaked page - pool becomes zombie (orphaned to lo) |
| old_ifindex = nsim.ifindex |
| rm_nsim.exec() |
| |
| # Zombie pool should NOT appear under the original device |
| pp_down = nf.page_pool_get({'ifindex': old_ifindex}, dump=True) |
| ksft_eq(len(pp_down), 0) |
| |
| # But it should appear in an unfiltered dump (under loopback) |
| pp_all = nf.page_pool_get({}, dump=True) |
| orphans = [pp for pp in pp_all |
| if "detach-time" in pp and "ifindex" not in pp] |
| ksft_ge(len(orphans), 1) |
| |
| |
| def page_pool_stats_ifindex_check(nf) -> None: |
| """Test page pool stats dump filtering by ifindex.""" |
| nsimdev1 = NetdevSimDev(queue_count=3) |
| defer(nsimdev1.remove) |
| nsimdev2 = NetdevSimDev(queue_count=5) |
| defer(nsimdev2.remove) |
| |
| nsim1 = nsimdev1.nsims[0] |
| nsim2 = nsimdev2.nsims[0] |
| |
| ip(f"link set dev {nsim1.ifname} up") |
| ip(f"link set dev {nsim2.ifname} up") |
| |
| # Unfiltered stats dump |
| all_stats = nf.page_pool_stats_get({}, dump=True) |
| s1_all = [s for s in all_stats |
| if s.get("info", {}).get("ifindex") == nsim1.ifindex] |
| s2_all = [s for s in all_stats |
| if s.get("info", {}).get("ifindex") == nsim2.ifindex] |
| ksft_ge(len(s1_all), 1) |
| ksft_ge(len(s2_all), 1) |
| |
| # Filtered stats dump |
| s1_flt = nf.page_pool_stats_get({'info': {'ifindex': nsim1.ifindex}}, |
| dump=True) |
| ksft_eq(s1_flt, s1_all) |
| |
| # Non-existent ifindex should return empty |
| s_none = nf.page_pool_stats_get({'info': {'ifindex': 12345678}}, dump=True) |
| ksft_eq(len(s_none), 0) |
| |
| # info.id should be rejected for stats dump |
| with ksft_raises(NlError) as cm: |
| nf.page_pool_stats_get({'info': {'id': s1_all[0]['info']['id']}}, |
| dump=True) |
| ksft_eq(cm.exception.nl_msg.error, -errno.EINVAL) |
| ksft_eq(cm.exception.nl_msg.extack['bad-attr'], '.info.id') |
| |
| |
| def main() -> None: |
| """ Ksft boiler plate main """ |
| nf = NetdevFamily() |
| ksft_run([empty_check, |
| lo_check, |
| dev_dump_reject_attr, |
| napi_list_check, |
| napi_set_threaded, |
| dev_set_threaded, |
| nsim_rxq_reset_down, |
| page_pool_check, |
| page_pool_dump_ifindex, |
| page_pool_ifindex_leak_check, |
| page_pool_stats_ifindex_check |
| ], |
| args=(nf, )) |
| ksft_exit() |
| |
| |
| if __name__ == "__main__": |
| main() |
