| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # (c) 2014, Sasha Levin <sasha.levin@oracle.com> |
| #set -x |
| |
| usage() { |
| echo "Usage:" |
| echo " $0 -r <release> | <vmlinux> [<base path>|auto] [<modules path>]" |
| } |
| |
| # Try to find a Rust demangler |
| if type llvm-cxxfilt >/dev/null 2>&1 ; then |
| cppfilt=llvm-cxxfilt |
| elif type c++filt >/dev/null 2>&1 ; then |
| cppfilt=c++filt |
| cppfilt_opts=-i |
| fi |
| |
| if [[ $1 == "-r" ]] ; then |
| vmlinux="" |
| basepath="auto" |
| modpath="" |
| release=$2 |
| |
| for fn in {,/usr/lib/debug}/boot/vmlinux-$release{,.debug} /lib/modules/$release{,/build}/vmlinux ; do |
| if [ -e "$fn" ] ; then |
| vmlinux=$fn |
| break |
| fi |
| done |
| |
| if [[ $vmlinux == "" ]] ; then |
| echo "ERROR! vmlinux image for release $release is not found" >&2 |
| usage |
| exit 2 |
| fi |
| else |
| vmlinux=$1 |
| basepath=${2-auto} |
| modpath=$3 |
| release="" |
| debuginfod= |
| |
| # Can we use debuginfod-find? |
| if type debuginfod-find >/dev/null 2>&1 ; then |
| debuginfod=${1-only} |
| fi |
| |
| if [[ $vmlinux == "" && -z $debuginfod ]] ; then |
| echo "ERROR! vmlinux image must be specified" >&2 |
| usage |
| exit 1 |
| fi |
| fi |
| |
| declare aarray_support=true |
| declare -A cache 2>/dev/null |
| if [[ $? != 0 ]]; then |
| aarray_support=false |
| else |
| declare -A modcache |
| fi |
| |
| find_module() { |
| if [[ -n $debuginfod ]] ; then |
| if [[ -n $modbuildid ]] ; then |
| debuginfod-find debuginfo $modbuildid && return |
| fi |
| |
| # Only using debuginfod so don't try to find vmlinux module path |
| if [[ $debuginfod == "only" ]] ; then |
| return |
| fi |
| fi |
| |
| if [[ "$modpath" != "" ]] ; then |
| for fn in $(find "$modpath" -name "${module//_/[-_]}.ko*") ; do |
| if readelf -WS "$fn" | grep -qwF .debug_line ; then |
| echo $fn |
| return |
| fi |
| done |
| return 1 |
| fi |
| |
| modpath=$(dirname "$vmlinux") |
| find_module && return |
| |
| if [[ $release == "" ]] ; then |
| release=$(gdb -ex 'print init_uts_ns.name.release' -ex 'quit' -quiet -batch "$vmlinux" 2>/dev/null | sed -n 's/\$1 = "\(.*\)".*/\1/p') |
| fi |
| |
| for dn in {/usr/lib/debug,}/lib/modules/$release ; do |
| if [ -e "$dn" ] ; then |
| modpath="$dn" |
| find_module && return |
| fi |
| done |
| |
| modpath="" |
| return 1 |
| } |
| |
| parse_symbol() { |
| # The structure of symbol at this point is: |
| # ([name]+[offset]/[total length]) |
| # |
| # For example: |
| # do_basic_setup+0x9c/0xbf |
| |
| if [[ $module == "" ]] ; then |
| local objfile=$vmlinux |
| elif [[ $aarray_support == true && "${modcache[$module]+isset}" == "isset" ]]; then |
| local objfile=${modcache[$module]} |
| else |
| local objfile=$(find_module) |
| if [[ $objfile == "" ]] ; then |
| echo "WARNING! Modules path isn't set, but is needed to parse this symbol" >&2 |
| return |
| fi |
| if [[ $aarray_support == true ]]; then |
| modcache[$module]=$objfile |
| fi |
| fi |
| |
| # Remove the englobing parenthesis |
| symbol=${symbol#\(} |
| symbol=${symbol%\)} |
| |
| # Strip segment |
| local segment |
| if [[ $symbol == *:* ]] ; then |
| segment=${symbol%%:*}: |
| symbol=${symbol#*:} |
| fi |
| |
| # Strip the symbol name so that we could look it up |
| local name=${symbol%+*} |
| |
| # Use 'nm vmlinux' to figure out the base address of said symbol. |
| # It's actually faster to call it every time than to load it |
| # all into bash. |
| if [[ $aarray_support == true && "${cache[$module,$name]+isset}" == "isset" ]]; then |
| local base_addr=${cache[$module,$name]} |
| else |
| local base_addr=$(nm "$objfile" 2>/dev/null | awk '$3 == "'$name'" && ($2 == "t" || $2 == "T") {print $1; exit}') |
| if [[ $base_addr == "" ]] ; then |
| # address not found |
| return |
| fi |
| if [[ $aarray_support == true ]]; then |
| cache[$module,$name]="$base_addr" |
| fi |
| fi |
| # Let's start doing the math to get the exact address into the |
| # symbol. First, strip out the symbol total length. |
| local expr=${symbol%/*} |
| |
| # Now, replace the symbol name with the base address we found |
| # before. |
| expr=${expr/$name/0x$base_addr} |
| |
| # Evaluate it to find the actual address |
| expr=$((expr)) |
| local address=$(printf "%x\n" "$expr") |
| |
| # Pass it to addr2line to get filename and line number |
| # Could get more than one result |
| if [[ $aarray_support == true && "${cache[$module,$address]+isset}" == "isset" ]]; then |
| local code=${cache[$module,$address]} |
| else |
| local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address" 2>/dev/null) |
| if [[ $aarray_support == true ]]; then |
| cache[$module,$address]=$code |
| fi |
| fi |
| |
| # addr2line doesn't return a proper error code if it fails, so |
| # we detect it using the value it prints so that we could preserve |
| # the offset/size into the function and bail out |
| if [[ $code == "??:0" ]]; then |
| return |
| fi |
| |
| # Strip out the base of the path on each line |
| code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code") |
| |
| # In the case of inlines, move everything to same line |
| code=${code//$'\n'/' '} |
| |
| # Demangle if the name looks like a Rust symbol and if |
| # we got a Rust demangler |
| if [[ $name =~ ^_R && $cppfilt != "" ]] ; then |
| name=$("$cppfilt" "$cppfilt_opts" "$name") |
| fi |
| |
| # Replace old address with pretty line numbers |
| symbol="$segment$name ($code)" |
| } |
| |
| debuginfod_get_vmlinux() { |
| local vmlinux_buildid=${1##* } |
| |
| if [[ $vmlinux != "" ]]; then |
| return |
| fi |
| |
| if [[ $vmlinux_buildid =~ ^[0-9a-f]+ ]]; then |
| vmlinux=$(debuginfod-find debuginfo $vmlinux_buildid) |
| if [[ $? -ne 0 ]] ; then |
| echo "ERROR! vmlinux image not found via debuginfod-find" >&2 |
| usage |
| exit 2 |
| fi |
| return |
| fi |
| echo "ERROR! Build ID for vmlinux not found. Try passing -r or specifying vmlinux" >&2 |
| usage |
| exit 2 |
| } |
| |
| decode_code() { |
| local scripts=`dirname "${BASH_SOURCE[0]}"` |
| |
| echo "$1" | $scripts/decodecode |
| } |
| |
| handle_line() { |
| if [[ $basepath == "auto" && $vmlinux != "" ]] ; then |
| module="" |
| symbol="kernel_init+0x0/0x0" |
| parse_symbol |
| basepath=${symbol#kernel_init (} |
| basepath=${basepath%/init/main.c:*)} |
| fi |
| |
| local words |
| |
| # Tokenize |
| read -a words <<<"$1" |
| |
| # Remove hex numbers. Do it ourselves until it happens in the |
| # kernel |
| |
| # We need to know the index of the last element before we |
| # remove elements because arrays are sparse |
| local last=$(( ${#words[@]} - 1 )) |
| |
| for i in "${!words[@]}"; do |
| # Remove the address |
| if [[ ${words[$i]} =~ \[\<([^]]+)\>\] ]]; then |
| unset words[$i] |
| fi |
| |
| # Format timestamps with tabs |
| if [[ ${words[$i]} == \[ && ${words[$i+1]} == *\] ]]; then |
| unset words[$i] |
| words[$i+1]=$(printf "[%13s\n" "${words[$i+1]}") |
| fi |
| done |
| |
| if [[ ${words[$last]} =~ ^[0-9a-f]+\] ]]; then |
| words[$last-1]="${words[$last-1]} ${words[$last]}" |
| unset words[$last] |
| last=$(( $last - 1 )) |
| fi |
| |
| if [[ ${words[$last]} =~ \[([^]]+)\] ]]; then |
| module=${words[$last]} |
| module=${module#\[} |
| module=${module%\]} |
| modbuildid=${module#* } |
| module=${module% *} |
| if [[ $modbuildid == $module ]]; then |
| modbuildid= |
| fi |
| symbol=${words[$last-1]} |
| unset words[$last-1] |
| else |
| # The symbol is the last element, process it |
| symbol=${words[$last]} |
| module= |
| modbuildid= |
| fi |
| |
| unset words[$last] |
| parse_symbol # modifies $symbol |
| |
| # Add up the line number to the symbol |
| echo "${words[@]}" "$symbol $module" |
| } |
| |
| while read line; do |
| # Strip unexpected carriage return at end of line |
| line=${line%$'\r'} |
| |
| # Let's see if we have an address in the line |
| if [[ $line =~ \[\<([^]]+)\>\] ]] || |
| [[ $line =~ [^+\ ]+\+0x[0-9a-f]+/0x[0-9a-f]+ ]]; then |
| # Translate address to line numbers |
| handle_line "$line" |
| # Is it a code line? |
| elif [[ $line == *Code:* ]]; then |
| decode_code "$line" |
| # Is it a version line? |
| elif [[ -n $debuginfod && $line =~ PID:\ [0-9]+\ Comm: ]]; then |
| debuginfod_get_vmlinux "$line" |
| else |
| # Nothing special in this line, show it as is |
| echo "$line" |
| fi |
| done |