| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Contains register definitions common to PowerPC 8xx CPUs. Notice |
| */ |
| #ifndef _ASM_POWERPC_REG_8xx_H |
| #define _ASM_POWERPC_REG_8xx_H |
| |
| /* Cache control on the MPC8xx is provided through some additional |
| * special purpose registers. |
| */ |
| #define SPRN_IC_CST 560 /* Instruction cache control/status */ |
| #define SPRN_IC_ADR 561 /* Address needed for some commands */ |
| #define SPRN_IC_DAT 562 /* Read-only data register */ |
| #define SPRN_DC_CST 568 /* Data cache control/status */ |
| #define SPRN_DC_ADR 569 /* Address needed for some commands */ |
| #define SPRN_DC_DAT 570 /* Read-only data register */ |
| |
| /* Misc Debug */ |
| #define SPRN_DPDR 630 |
| #define SPRN_MI_CAM 816 |
| #define SPRN_MI_RAM0 817 |
| #define SPRN_MI_RAM1 818 |
| #define SPRN_MD_CAM 824 |
| #define SPRN_MD_RAM0 825 |
| #define SPRN_MD_RAM1 826 |
| |
| /* Special MSR manipulation registers */ |
| #define SPRN_EIE 80 /* External interrupt enable (EE=1, RI=1) */ |
| #define SPRN_EID 81 /* External interrupt disable (EE=0, RI=1) */ |
| #define SPRN_NRI 82 /* Non recoverable interrupt (EE=0, RI=0) */ |
| |
| /* Debug registers */ |
| #define SPRN_CMPA 144 |
| #define SPRN_COUNTA 150 |
| #define SPRN_CMPE 152 |
| #define SPRN_CMPF 153 |
| #define SPRN_LCTRL1 156 |
| #define SPRN_LCTRL2 157 |
| #ifdef CONFIG_PPC_8xx |
| #define SPRN_ICTRL 158 |
| #endif |
| #define SPRN_BAR 159 |
| |
| /* Commands. Only the first few are available to the instruction cache. |
| */ |
| #define IDC_ENABLE 0x02000000 /* Cache enable */ |
| #define IDC_DISABLE 0x04000000 /* Cache disable */ |
| #define IDC_LDLCK 0x06000000 /* Load and lock */ |
| #define IDC_UNLINE 0x08000000 /* Unlock line */ |
| #define IDC_UNALL 0x0a000000 /* Unlock all */ |
| #define IDC_INVALL 0x0c000000 /* Invalidate all */ |
| |
| #define DC_FLINE 0x0e000000 /* Flush data cache line */ |
| #define DC_SFWT 0x01000000 /* Set forced writethrough mode */ |
| #define DC_CFWT 0x03000000 /* Clear forced writethrough mode */ |
| #define DC_SLES 0x05000000 /* Set little endian swap mode */ |
| #define DC_CLES 0x07000000 /* Clear little endian swap mode */ |
| |
| /* Status. |
| */ |
| #define IDC_ENABLED 0x80000000 /* Cache is enabled */ |
| #define IDC_CERR1 0x00200000 /* Cache error 1 */ |
| #define IDC_CERR2 0x00100000 /* Cache error 2 */ |
| #define IDC_CERR3 0x00080000 /* Cache error 3 */ |
| |
| #define DC_DFWT 0x40000000 /* Data cache is forced write through */ |
| #define DC_LES 0x20000000 /* Caches are little endian mode */ |
| |
| #endif /* _ASM_POWERPC_REG_8xx_H */ |
