| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung Exynos5260 SoC device tree source |
| * |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| */ |
| |
| #include <dt-bindings/clock/exynos5260-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| |
| / { |
| compatible = "samsung,exynos5260", "samsung,exynos5"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| i2c0 = &hsi2c_0; |
| i2c1 = &hsi2c_1; |
| i2c2 = &hsi2c_2; |
| i2c3 = &hsi2c_3; |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| pinctrl2 = &pinctrl_2; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x0>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0x1>; |
| cci-control-port = <&cci_control1>; |
| }; |
| |
| cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x100>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x101>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x102>; |
| cci-control-port = <&cci_control0>; |
| }; |
| |
| cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x103>; |
| cci-control-port = <&cci_control0>; |
| }; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clock_top: clock-controller@10010000 { |
| compatible = "samsung,exynos5260-clock-top"; |
| reg = <0x10010000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_peri: clock-controller@10200000 { |
| compatible = "samsung,exynos5260-clock-peri"; |
| reg = <0x10200000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_egl: clock-controller@10600000 { |
| compatible = "samsung,exynos5260-clock-egl"; |
| reg = <0x10600000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_kfc: clock-controller@10700000 { |
| compatible = "samsung,exynos5260-clock-kfc"; |
| reg = <0x10700000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_g2d: clock-controller@10a00000 { |
| compatible = "samsung,exynos5260-clock-g2d"; |
| reg = <0x10A00000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_mif: clock-controller@10ce0000 { |
| compatible = "samsung,exynos5260-clock-mif"; |
| reg = <0x10CE0000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_mfc: clock-controller@11090000 { |
| compatible = "samsung,exynos5260-clock-mfc"; |
| reg = <0x11090000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_g3d: clock-controller@11830000 { |
| compatible = "samsung,exynos5260-clock-g3d"; |
| reg = <0x11830000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_fsys: clock-controller@122e0000 { |
| compatible = "samsung,exynos5260-clock-fsys"; |
| reg = <0x122E0000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_aud: clock-controller@128c0000 { |
| compatible = "samsung,exynos5260-clock-aud"; |
| reg = <0x128C0000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_isp: clock-controller@133c0000 { |
| compatible = "samsung,exynos5260-clock-isp"; |
| reg = <0x133C0000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_gscl: clock-controller@13f00000 { |
| compatible = "samsung,exynos5260-clock-gscl"; |
| reg = <0x13F00000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_disp: clock-controller@14550000 { |
| compatible = "samsung,exynos5260-clock-disp"; |
| reg = <0x14550000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| gic: interrupt-controller@10481000 { |
| compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| interrupt-controller; |
| reg = <0x10481000 0x1000>, |
| <0x10482000 0x2000>, |
| <0x10484000 0x2000>, |
| <0x10486000 0x2000>; |
| interrupts = <GIC_PPI 9 |
| (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| chipid: chipid@10000000 { |
| compatible = "samsung,exynos4210-chipid"; |
| reg = <0x10000000 0x100>; |
| }; |
| |
| mct: timer@100b0000 { |
| compatible = "samsung,exynos4210-mct"; |
| reg = <0x100B0000 0x1000>; |
| clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| cci: cci@10f00000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10F00000 0x1000>; |
| ranges = <0x0 0x10F00000 0x6000>; |
| |
| cci_control0: slave-if@4000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x4000 0x1000>; |
| }; |
| |
| cci_control1: slave-if@5000 { |
| compatible = "arm,cci-400-ctrl-if"; |
| interface-type = "ace"; |
| reg = <0x5000 0x1000>; |
| }; |
| }; |
| |
| pinctrl_0: pinctrl@11600000 { |
| compatible = "samsung,exynos5260-pinctrl"; |
| reg = <0x11600000 0x1000>; |
| interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_1: pinctrl@12290000 { |
| compatible = "samsung,exynos5260-pinctrl"; |
| reg = <0x12290000 0x1000>; |
| interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_2: pinctrl@128b0000 { |
| compatible = "samsung,exynos5260-pinctrl"; |
| reg = <0x128B0000 0x1000>; |
| interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmu_system_controller: system-controller@10d50000 { |
| compatible = "samsung,exynos5260-pmu", "syscon"; |
| reg = <0x10D50000 0x10000>; |
| }; |
| |
| uart0: serial@12c00000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x12C00000 0x100>; |
| interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@12c10000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x12C10000 0x100>; |
| interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@12c20000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x12C20000 0x100>; |
| interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@12860000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x12860000 0x100>; |
| interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| mmc_0: mmc@12140000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| reg = <0x12140000 0x2000>; |
| interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| assigned-clocks = |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>, |
| <&clock_top TOP_SCLK_MMC0>; |
| assigned-clock-parents = |
| <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>; |
| assigned-clock-rates = <0>, <0>, <800000000>; |
| fifo-depth = <64>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@12150000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| reg = <0x12150000 0x2000>; |
| interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| assigned-clocks = |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>, |
| <&clock_top TOP_SCLK_MMC1>; |
| assigned-clock-parents = |
| <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>; |
| assigned-clock-rates = <0>, <0>, <800000000>; |
| fifo-depth = <64>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@12160000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| reg = <0x12160000 0x2000>; |
| interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| assigned-clocks = |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>, |
| <&clock_top TOP_SCLK_MMC2>; |
| assigned-clock-parents = |
| <&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| <&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>; |
| assigned-clock-rates = <0>, <0>, <800000000>; |
| fifo-depth = <64>; |
| status = "disabled"; |
| }; |
| |
| hsi2c_0: hsi2c@12da0000 { |
| compatible = "samsung,exynos5260-hsi2c"; |
| reg = <0x12DA0000 0x1000>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_hs_bus>; |
| clocks = <&clock_peri PERI_CLK_HSIC0>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_1: hsi2c@12db0000 { |
| compatible = "samsung,exynos5260-hsi2c"; |
| reg = <0x12DB0000 0x1000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_hs_bus>; |
| clocks = <&clock_peri PERI_CLK_HSIC1>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_2: hsi2c@12dc0000 { |
| compatible = "samsung,exynos5260-hsi2c"; |
| reg = <0x12DC0000 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_hs_bus>; |
| clocks = <&clock_peri PERI_CLK_HSIC2>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_3: hsi2c@12dd0000 { |
| compatible = "samsung,exynos5260-hsi2c"; |
| reg = <0x12DD0000 0x1000>; |
| interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_hs_bus>; |
| clocks = <&clock_peri PERI_CLK_HSIC3>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| #include "exynos5260-pinctrl.dtsi" |
