| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2019 Marvell Technology Group Ltd. |
| * |
| * Device Tree file for Marvell Armada AP80x. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| /dts-v1/; |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| gpio0 = &ap_gpio; |
| spi0 = &spi0; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| /* |
| * This area matches the mapping done with a |
| * mainline U-Boot, and should be updated by the |
| * bootloader. |
| */ |
| |
| psci-area@4000000 { |
| reg = <0x0 0x4000000 0x0 0x200000>; |
| no-map; |
| }; |
| }; |
| |
| AP_NAME { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| config-space@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x0 0x0 0xf0000000 0x1000000>; |
| |
| smmu: iommu@5000000 { |
| compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; |
| reg = <0x100000 0x100000>; |
| dma-coherent; |
| #iommu-cells = <1>; |
| #global-interrupts = <1>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| status = "disabled"; |
| }; |
| |
| gic: interrupt-controller@210000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| reg = <0x210000 0x10000>, |
| <0x220000 0x20000>, |
| <0x240000 0x20000>, |
| <0x260000 0x20000>; |
| |
| gic_v2m0: v2m@280000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x280000 0x1000>; |
| arm,msi-base-spi = <160>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m1: v2m@290000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x290000 0x1000>; |
| arm,msi-base-spi = <192>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m2: v2m@2a0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2a0000 0x1000>; |
| arm,msi-base-spi = <224>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m3: v2m@2b0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2b0000 0x1000>; |
| arm,msi-base-spi = <256>; |
| arm,msi-num-spis = <32>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a72-pmu"; |
| interrupt-parent = <&pic>; |
| interrupts = <17>; |
| }; |
| |
| odmi: odmi@300000 { |
| compatible = "marvell,odmi-controller"; |
| interrupt-controller; |
| msi-controller; |
| marvell,odmi-frames = <4>; |
| reg = <0x300000 0x4000>, |
| <0x304000 0x4000>, |
| <0x308000 0x4000>, |
| <0x30C000 0x4000>; |
| marvell,spi-base = <128>, <136>, <144>, <152>; |
| }; |
| |
| gicp: gicp@3f0040 { |
| compatible = "marvell,ap806-gicp"; |
| reg = <0x3f0040 0x10>; |
| marvell,spi-ranges = <64 64>, <288 64>; |
| msi-controller; |
| }; |
| |
| pic: interrupt-controller@3f0100 { |
| compatible = "marvell,armada-8k-pic"; |
| reg = <0x3f0100 0x10>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| sei: interrupt-controller@3f0200 { |
| compatible = "marvell,ap806-sei"; |
| reg = <0x3f0200 0x40>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| msi-controller; |
| }; |
| |
| xor@400000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x400000 0x1000>, |
| <0x410000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@420000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x420000 0x1000>, |
| <0x430000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@440000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x440000 0x1000>, |
| <0x450000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@460000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x460000 0x1000>, |
| <0x470000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| spi0: spi@510600 { |
| compatible = "marvell,armada-380-spi"; |
| reg = <0x510600 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@511000 { |
| compatible = "marvell,mv78230-i2c"; |
| reg = <0x511000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@512000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512000 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@512100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512100 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| |
| }; |
| |
| watchdog: watchdog@610000 { |
| compatible = "arm,sbsa-gwdt"; |
| reg = <0x610000 0x1000>, <0x600000 0x1000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| ap_sdhci0: sdhci@6e0000 { |
| compatible = "marvell,armada-ap806-sdhci"; |
| reg = <0x6e0000 0x300>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core"; |
| clocks = <&ap_clk 4>; |
| dma-coherent; |
| marvell,xenon-phy-slow-mode; |
| status = "disabled"; |
| }; |
| |
| ap_syscon0: system-controller@6f4000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x6f4000 0x2000>; |
| |
| ap_pinctrl: pinctrl { |
| compatible = "marvell,ap806-pinctrl"; |
| |
| uart0_pins: uart0-pins { |
| marvell,pins = "mpp11", "mpp19"; |
| marvell,function = "uart0"; |
| }; |
| }; |
| |
| ap_gpio: gpio@1040 { |
| compatible = "marvell,armada-8k-gpio"; |
| offset = <0x1040>; |
| ngpios = <20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&ap_pinctrl 0 0 20>; |
| }; |
| }; |
| |
| ap_syscon1: system-controller@6f8000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x6f8000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| ap_thermal: thermal-sensor@80 { |
| compatible = "marvell,armada-ap806-thermal"; |
| reg = <0x80 0x10>; |
| interrupt-parent = <&sei>; |
| interrupts = <18>; |
| #thermal-sensor-cells = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| /* |
| * The thermal IP features one internal sensor plus, if applicable, one |
| * remote channel wired to one sensor per CPU. |
| * |
| * Only one thermal zone per AP/CP may trigger interrupts at a time, the |
| * first one that will have a critical trip point will be chosen. |
| */ |
| thermal-zones { |
| ap_thermal_ic: ap-thermal-ic { |
| polling-delay-passive = <0>; /* Interrupt driven */ |
| polling-delay = <0>; /* Interrupt driven */ |
| |
| thermal-sensors = <&ap_thermal 0>; |
| |
| trips { |
| ap_crit: ap-crit { |
| temperature = <100000>; /* mC degrees */ |
| hysteresis = <2000>; /* mC degrees */ |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { }; |
| }; |
| |
| ap_thermal_cpu0: ap-thermal-cpu0 { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&ap_thermal 1>; |
| |
| trips { |
| cpu0_hot: cpu0-hot { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu0_emerg: cpu0-emerg { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0_hot: map0-hot { |
| trip = <&cpu0_hot>; |
| cooling-device = <&cpu0 1 2>, |
| <&cpu1 1 2>; |
| }; |
| map0_emerg: map0-ermerg { |
| trip = <&cpu0_emerg>; |
| cooling-device = <&cpu0 3 3>, |
| <&cpu1 3 3>; |
| }; |
| }; |
| }; |
| |
| ap_thermal_cpu1: ap-thermal-cpu1 { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&ap_thermal 2>; |
| |
| trips { |
| cpu1_hot: cpu1-hot { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu1_emerg: cpu1-emerg { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map1_hot: map1-hot { |
| trip = <&cpu1_hot>; |
| cooling-device = <&cpu0 1 2>, |
| <&cpu1 1 2>; |
| }; |
| map1_emerg: map1-emerg { |
| trip = <&cpu1_emerg>; |
| cooling-device = <&cpu0 3 3>, |
| <&cpu1 3 3>; |
| }; |
| }; |
| }; |
| |
| ap_thermal_cpu2: ap-thermal-cpu2 { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&ap_thermal 3>; |
| |
| trips { |
| cpu2_hot: cpu2-hot { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu2_emerg: cpu2-emerg { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map2_hot: map2-hot { |
| trip = <&cpu2_hot>; |
| cooling-device = <&cpu2 1 2>, |
| <&cpu3 1 2>; |
| }; |
| map2_emerg: map2-emerg { |
| trip = <&cpu2_emerg>; |
| cooling-device = <&cpu2 3 3>, |
| <&cpu3 3 3>; |
| }; |
| }; |
| }; |
| |
| ap_thermal_cpu3: ap-thermal-cpu3 { |
| polling-delay-passive = <1000>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&ap_thermal 4>; |
| |
| trips { |
| cpu3_hot: cpu3-hot { |
| temperature = <85000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| cpu3_emerg: cpu3-emerg { |
| temperature = <95000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| }; |
| |
| cooling-maps { |
| map3_hot: map3-bhot { |
| trip = <&cpu3_hot>; |
| cooling-device = <&cpu2 1 2>, |
| <&cpu3 1 2>; |
| }; |
| map3_emerg: map3-emerg { |
| trip = <&cpu3_emerg>; |
| cooling-device = <&cpu2 3 3>, |
| <&cpu3 3 3>; |
| }; |
| }; |
| }; |
| }; |
| }; |
