| /* |
| * Bus error event handling code for DECstation/DECsystem 3100 |
| * and 2100 (KN01) systems equipped with parity error detection |
| * logic. |
| * |
| * Copyright (c) 2005 Maciej W. Rozycki |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| |
| #include <asm/inst.h> |
| #include <asm/irq_regs.h> |
| #include <asm/mipsregs.h> |
| #include <asm/page.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/traps.h> |
| #include <asm/uaccess.h> |
| |
| #include <asm/dec/kn01.h> |
| |
| |
| /* CP0 hazard avoidance. */ |
| #define BARRIER \ |
| __asm__ __volatile__( \ |
| ".set push\n\t" \ |
| ".set noreorder\n\t" \ |
| "nop\n\t" \ |
| ".set pop\n\t") |
| |
| /* |
| * Bits 7:0 of the Control Register are write-only -- the |
| * corresponding bits of the Status Register have a different |
| * meaning. Hence we use a cache. It speeds up things a bit |
| * as well. |
| * |
| * There is no default value -- it has to be initialized. |
| */ |
| u16 cached_kn01_csr; |
| static DEFINE_SPINLOCK(kn01_lock); |
| |
| |
| static inline void dec_kn01_be_ack(void) |
| { |
| volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&kn01_lock, flags); |
| |
| *csr = cached_kn01_csr | KN01_CSR_MEMERR; /* Clear bus IRQ. */ |
| iob(); |
| |
| spin_unlock_irqrestore(&kn01_lock, flags); |
| } |
| |
| static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker) |
| { |
| volatile u32 *kn01_erraddr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + |
| KN01_ERRADDR); |
| |
| static const char excstr[] = "exception"; |
| static const char intstr[] = "interrupt"; |
| static const char cpustr[] = "CPU"; |
| static const char mreadstr[] = "memory read"; |
| static const char readstr[] = "read"; |
| static const char writestr[] = "write"; |
| static const char timestr[] = "timeout"; |
| static const char paritystr[] = "parity error"; |
| |
| int data = regs->cp0_cause & 4; |
| unsigned int __user *pc = (unsigned int __user *)regs->cp0_epc + |
| ((regs->cp0_cause & CAUSEF_BD) != 0); |
| union mips_instruction insn; |
| unsigned long entrylo, offset; |
| long asid, entryhi, vaddr; |
| |
| const char *kind, *agent, *cycle, *event; |
| unsigned long address; |
| |
| u32 erraddr = *kn01_erraddr; |
| int action = MIPS_BE_FATAL; |
| |
| /* Ack ASAP, so that any subsequent errors get caught. */ |
| dec_kn01_be_ack(); |
| |
| kind = invoker ? intstr : excstr; |
| |
| agent = cpustr; |
| |
| if (invoker) |
| address = erraddr; |
| else { |
| /* Bloody hardware doesn't record the address for reads... */ |
| if (data) { |
| /* This never faults. */ |
| __get_user(insn.word, pc); |
| vaddr = regs->regs[insn.i_format.rs] + |
| insn.i_format.simmediate; |
| } else |
| vaddr = (long)pc; |
| if (KSEGX(vaddr) == CKSEG0 || KSEGX(vaddr) == CKSEG1) |
| address = CPHYSADDR(vaddr); |
| else { |
| /* Peek at what physical address the CPU used. */ |
| asid = read_c0_entryhi(); |
| entryhi = asid & (PAGE_SIZE - 1); |
| entryhi |= vaddr & ~(PAGE_SIZE - 1); |
| write_c0_entryhi(entryhi); |
| BARRIER; |
| tlb_probe(); |
| /* No need to check for presence. */ |
| tlb_read(); |
| entrylo = read_c0_entrylo0(); |
| write_c0_entryhi(asid); |
| offset = vaddr & (PAGE_SIZE - 1); |
| address = (entrylo & ~(PAGE_SIZE - 1)) | offset; |
| } |
| } |
| |
| /* Treat low 256MB as memory, high -- as I/O. */ |
| if (address < 0x10000000) { |
| cycle = mreadstr; |
| event = paritystr; |
| } else { |
| cycle = invoker ? writestr : readstr; |
| event = timestr; |
| } |
| |
| if (is_fixup) |
| action = MIPS_BE_FIXUP; |
| |
| if (action != MIPS_BE_FIXUP) |
| printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n", |
| kind, agent, cycle, event, address); |
| |
| return action; |
| } |
| |
| int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup) |
| { |
| return dec_kn01_be_backend(regs, is_fixup, 0); |
| } |
| |
| irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id) |
| { |
| volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); |
| struct pt_regs *regs = get_irq_regs(); |
| int action; |
| |
| if (!(*csr & KN01_CSR_MEMERR)) |
| return IRQ_NONE; /* Must have been video. */ |
| |
| action = dec_kn01_be_backend(regs, 0, 1); |
| |
| if (action == MIPS_BE_DISCARD) |
| return IRQ_HANDLED; |
| |
| /* |
| * FIXME: Find the affected processes and kill them, otherwise |
| * we must die. |
| * |
| * The interrupt is asynchronously delivered thus EPC and RA |
| * may be irrelevant, but are printed for a reference. |
| */ |
| printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n", |
| regs->cp0_epc, regs->regs[31]); |
| die("Unrecoverable bus error", regs); |
| } |
| |
| |
| void __init dec_kn01_be_init(void) |
| { |
| volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&kn01_lock, flags); |
| |
| /* Preset write-only bits of the Control Register cache. */ |
| cached_kn01_csr = *csr; |
| cached_kn01_csr &= KN01_CSR_STATUS | KN01_CSR_PARDIS | KN01_CSR_TXDIS; |
| cached_kn01_csr |= KN01_CSR_LEDS; |
| |
| /* Enable parity error detection. */ |
| cached_kn01_csr &= ~KN01_CSR_PARDIS; |
| *csr = cached_kn01_csr; |
| iob(); |
| |
| spin_unlock_irqrestore(&kn01_lock, flags); |
| |
| /* Clear any leftover errors from the firmware. */ |
| dec_kn01_be_ack(); |
| } |