blob: 78883239784a75ba0dac9399b678a45da14446b4 [file] [log] [blame]
/******************************************************************************
*
* Module Name: evmisc - Miscellaneous event manager support functions
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acevents.h>
#include <acpi/acnamesp.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evmisc")
#ifdef ACPI_DEBUG_OUTPUT
static const char *acpi_notify_value_names[] = {
"Bus Check",
"Device Check",
"Device Wake",
"Eject request",
"Device Check Light",
"Frequency Mismatch",
"Bus Mode Mismatch",
"Power Fault"
};
#endif
/* Local prototypes */
static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context);
static void ACPI_SYSTEM_XFACE acpi_ev_global_lock_thread(void *context);
static u32 acpi_ev_global_lock_handler(void *context);
/*******************************************************************************
*
* FUNCTION: acpi_ev_is_notify_object
*
* PARAMETERS: Node - Node to check
*
* RETURN: TRUE if notifies allowed on this object
*
* DESCRIPTION: Check type of node for a object that supports notifies.
*
* TBD: This could be replaced by a flag bit in the node.
*
******************************************************************************/
u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node)
{
switch (node->type) {
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_POWER:
case ACPI_TYPE_THERMAL:
/*
* These are the ONLY objects that can receive ACPI notifications
*/
return (TRUE);
default:
return (FALSE);
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_queue_notify_request
*
* PARAMETERS: Node - NS node for the notified object
* notify_value - Value from the Notify() request
*
* RETURN: Status
*
* DESCRIPTION: Dispatch a device notification event to a previously
* installed handler.
*
******************************************************************************/
acpi_status
acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
u32 notify_value)
{
union acpi_operand_object *obj_desc;
union acpi_operand_object *handler_obj = NULL;
union acpi_generic_state *notify_info;
acpi_status status = AE_OK;
ACPI_FUNCTION_NAME("ev_queue_notify_request");
/*
* For value 3 (Ejection Request), some device method may need to be run.
* For value 2 (Device Wake) if _PRW exists, the _PS0 method may need
* to be run.
* For value 0x80 (Status Change) on the power button or sleep button,
* initiate soft-off or sleep operation?
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Dispatching Notify(%X) on node %p\n", notify_value,
node));
if (notify_value <= 7) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Notify value: %s\n",
acpi_notify_value_names[notify_value]));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Notify value: 0x%2.2X **Device Specific**\n",
notify_value));
}
/* Get the notify object attached to the NS Node */
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/* We have the notify object, Get the right handler */
switch (node->type) {
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_THERMAL:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_POWER:
if (notify_value <= ACPI_MAX_SYS_NOTIFY) {
handler_obj =
obj_desc->common_notify.system_notify;
} else {
handler_obj =
obj_desc->common_notify.device_notify;
}
break;
default:
/* All other types are not supported */
return (AE_TYPE);
}
}
/* If there is any handler to run, schedule the dispatcher */
if ((acpi_gbl_system_notify.handler
&& (notify_value <= ACPI_MAX_SYS_NOTIFY))
|| (acpi_gbl_device_notify.handler
&& (notify_value > ACPI_MAX_SYS_NOTIFY)) || handler_obj) {
notify_info = acpi_ut_create_generic_state();
if (!notify_info) {
return (AE_NO_MEMORY);
}
notify_info->common.data_type = ACPI_DESC_TYPE_STATE_NOTIFY;
notify_info->notify.node = node;
notify_info->notify.value = (u16) notify_value;
notify_info->notify.handler_obj = handler_obj;
status = acpi_os_queue_for_execution(OSD_PRIORITY_HIGH,
acpi_ev_notify_dispatch,
notify_info);
if (ACPI_FAILURE(status)) {
acpi_ut_delete_generic_state(notify_info);
}
}
if (!handler_obj) {
/*
* There is no per-device notify handler for this device.
* This may or may not be a problem.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No notify handler for Notify(%4.4s, %X) node %p\n",
acpi_ut_get_node_name(node), notify_value,
node));
}
return (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_notify_dispatch
*
* PARAMETERS: Context - To be passed to the notify handler
*
* RETURN: None.
*
* DESCRIPTION: Dispatch a device notification event to a previously
* installed handler.
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context)
{
union acpi_generic_state *notify_info =
(union acpi_generic_state *)context;
acpi_notify_handler global_handler = NULL;
void *global_context = NULL;
union acpi_operand_object *handler_obj;
ACPI_FUNCTION_ENTRY();
/*
* We will invoke a global notify handler if installed.
* This is done _before_ we invoke the per-device handler attached
* to the device.
*/
if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) {
/* Global system notification handler */
if (acpi_gbl_system_notify.handler) {
global_handler = acpi_gbl_system_notify.handler;
global_context = acpi_gbl_system_notify.context;
}
} else {
/* Global driver notification handler */
if (acpi_gbl_device_notify.handler) {
global_handler = acpi_gbl_device_notify.handler;
global_context = acpi_gbl_device_notify.context;
}
}
/* Invoke the system handler first, if present */
if (global_handler) {
global_handler(notify_info->notify.node,
notify_info->notify.value, global_context);
}
/* Now invoke the per-device handler, if present */
handler_obj = notify_info->notify.handler_obj;
if (handler_obj) {
handler_obj->notify.handler(notify_info->notify.node,
notify_info->notify.value,
handler_obj->notify.context);
}
/* All done with the info object */
acpi_ut_delete_generic_state(notify_info);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_global_lock_thread
*
* PARAMETERS: Context - From thread interface, not used
*
* RETURN: None
*
* DESCRIPTION: Invoked by SCI interrupt handler upon acquisition of the
* Global Lock. Simply signal all threads that are waiting
* for the lock.
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_global_lock_thread(void *context)
{
acpi_status status;
/* Signal threads that are waiting for the lock */
if (acpi_gbl_global_lock_thread_count) {
/* Send sufficient units to the semaphore */
status =
acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore,
acpi_gbl_global_lock_thread_count);
if (ACPI_FAILURE(status)) {
ACPI_REPORT_ERROR(("Could not signal Global Lock semaphore\n"));
}
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_global_lock_handler
*
* PARAMETERS: Context - From thread interface, not used
*
* RETURN: ACPI_INTERRUPT_HANDLED or ACPI_INTERRUPT_NOT_HANDLED
*
* DESCRIPTION: Invoked directly from the SCI handler when a global lock
* release interrupt occurs. Grab the global lock and queue
* the global lock thread for execution
*
******************************************************************************/
static u32 acpi_ev_global_lock_handler(void *context)
{
u8 acquired = FALSE;
acpi_status status;
/*
* Attempt to get the lock
* If we don't get it now, it will be marked pending and we will
* take another interrupt when it becomes free.
*/
ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, acquired);
if (acquired) {
/* Got the lock, now wake all threads waiting for it */
acpi_gbl_global_lock_acquired = TRUE;
/* Run the Global Lock thread which will signal all waiting threads */
status = acpi_os_queue_for_execution(OSD_PRIORITY_HIGH,
acpi_ev_global_lock_thread,
context);
if (ACPI_FAILURE(status)) {
ACPI_REPORT_ERROR(("Could not queue Global Lock thread, %s\n", acpi_format_exception(status)));
return (ACPI_INTERRUPT_NOT_HANDLED);
}
}
return (ACPI_INTERRUPT_HANDLED);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_init_global_lock_handler
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Install a handler for the global lock release event
*
******************************************************************************/
acpi_status acpi_ev_init_global_lock_handler(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE("ev_init_global_lock_handler");
acpi_gbl_global_lock_present = TRUE;
status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL,
acpi_ev_global_lock_handler,
NULL);
/*
* If the global lock does not exist on this platform, the attempt
* to enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick)
* Map to AE_OK, but mark global lock as not present.
* Any attempt to actually use the global lock will be flagged
* with an error.
*/
if (status == AE_NO_HARDWARE_RESPONSE) {
ACPI_REPORT_ERROR(("No response from Global Lock hardware, disabling lock\n"));
acpi_gbl_global_lock_present = FALSE;
status = AE_OK;
}
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_ev_acquire_global_lock
*
* PARAMETERS: Timeout - Max time to wait for the lock, in millisec.
*
* RETURN: Status
*
* DESCRIPTION: Attempt to gain ownership of the Global Lock.
*
*****************************************************************************/
acpi_status acpi_ev_acquire_global_lock(u16 timeout)
{
acpi_status status = AE_OK;
u8 acquired = FALSE;
ACPI_FUNCTION_TRACE("ev_acquire_global_lock");
#ifndef ACPI_APPLICATION
/* Make sure that we actually have a global lock */
if (!acpi_gbl_global_lock_present) {
return_ACPI_STATUS(AE_NO_GLOBAL_LOCK);
}
#endif
/* One more thread wants the global lock */
acpi_gbl_global_lock_thread_count++;
/*
* If we (OS side vs. BIOS side) have the hardware lock already,
* we are done
*/
if (acpi_gbl_global_lock_acquired) {
return_ACPI_STATUS(AE_OK);
}
/* We must acquire the actual hardware lock */
ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, acquired);
if (acquired) {
/* We got the lock */
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Acquired the HW Global Lock\n"));
acpi_gbl_global_lock_acquired = TRUE;
return_ACPI_STATUS(AE_OK);
}
/*
* Did not get the lock. The pending bit was set above, and we must now
* wait until we get the global lock released interrupt.
*/
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Waiting for the HW Global Lock\n"));
/*
* Acquire the global lock semaphore first.
* Since this wait will block, we must release the interpreter
*/
status = acpi_ex_system_wait_semaphore(acpi_gbl_global_lock_semaphore,
timeout);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_release_global_lock
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Releases ownership of the Global Lock.
*
******************************************************************************/
acpi_status acpi_ev_release_global_lock(void)
{
u8 pending = FALSE;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE("ev_release_global_lock");
if (!acpi_gbl_global_lock_thread_count) {
ACPI_REPORT_WARNING(("Cannot release HW Global Lock, it has not been acquired\n"));
return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
/* One fewer thread has the global lock */
acpi_gbl_global_lock_thread_count--;
if (acpi_gbl_global_lock_thread_count) {
/* There are still some threads holding the lock, cannot release */
return_ACPI_STATUS(AE_OK);
}
/*
* No more threads holding lock, we can do the actual hardware
* release
*/
ACPI_RELEASE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, pending);
acpi_gbl_global_lock_acquired = FALSE;
/*
* If the pending bit was set, we must write GBL_RLS to the control
* register
*/
if (pending) {
status = acpi_set_register(ACPI_BITREG_GLOBAL_LOCK_RELEASE,
1, ACPI_MTX_LOCK);
}
return_ACPI_STATUS(status);
}
/******************************************************************************
*
* FUNCTION: acpi_ev_terminate
*
* PARAMETERS: none
*
* RETURN: none
*
* DESCRIPTION: Disable events and free memory allocated for table storage.
*
******************************************************************************/
void acpi_ev_terminate(void)
{
acpi_native_uint i;
acpi_status status;
ACPI_FUNCTION_TRACE("ev_terminate");
if (acpi_gbl_events_initialized) {
/*
* Disable all event-related functionality.
* In all cases, on error, print a message but obviously we don't abort.
*/
/* Disable all fixed events */
for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) {
status = acpi_disable_event((u32) i, 0);
if (ACPI_FAILURE(status)) {
ACPI_REPORT_ERROR(("Could not disable fixed event %d\n", (u32) i));
}
}
/* Disable all GPEs in all GPE blocks */
status = acpi_ev_walk_gpe_list(acpi_hw_disable_gpe_block);
/* Remove SCI handler */
status = acpi_ev_remove_sci_handler();
if (ACPI_FAILURE(status)) {
ACPI_REPORT_ERROR(("Could not remove SCI handler\n"));
}
}
/* Deallocate all handler objects installed within GPE info structs */
status = acpi_ev_walk_gpe_list(acpi_ev_delete_gpe_handlers);
/* Return to original mode if necessary */
if (acpi_gbl_original_mode == ACPI_SYS_MODE_LEGACY) {
status = acpi_disable();
if (ACPI_FAILURE(status)) {
ACPI_REPORT_WARNING(("acpi_disable failed\n"));
}
}
return_VOID;
}