| /* |
| * coretemp.c - Linux kernel module for hardware monitoring |
| * |
| * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> |
| * |
| * Inspired from many hwmon drivers |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA |
| * 02110-1301 USA. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/hwmon.h> |
| #include <linux/sysfs.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/list.h> |
| #include <linux/platform_device.h> |
| #include <linux/cpu.h> |
| #include <linux/smp.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <asm/msr.h> |
| #include <asm/processor.h> |
| #include <asm/cpu_device_id.h> |
| |
| #define DRVNAME "coretemp" |
| |
| /* |
| * force_tjmax only matters when TjMax can't be read from the CPU itself. |
| * When set, it replaces the driver's suboptimal heuristic. |
| */ |
| static int force_tjmax; |
| module_param_named(tjmax, force_tjmax, int, 0444); |
| MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); |
| |
| #define PKG_SYSFS_ATTR_NO 1 /* Sysfs attribute for package temp */ |
| #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ |
| #define NUM_REAL_CORES 128 /* Number of Real cores per cpu */ |
| #define CORETEMP_NAME_LENGTH 19 /* String Length of attrs */ |
| #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ |
| #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) |
| #define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) |
| |
| #define TO_PHYS_ID(cpu) (cpu_data(cpu).phys_proc_id) |
| #define TO_CORE_ID(cpu) (cpu_data(cpu).cpu_core_id) |
| #define TO_ATTR_NO(cpu) (TO_CORE_ID(cpu) + BASE_SYSFS_ATTR_NO) |
| |
| #ifdef CONFIG_SMP |
| #define for_each_sibling(i, cpu) \ |
| for_each_cpu(i, topology_sibling_cpumask(cpu)) |
| #else |
| #define for_each_sibling(i, cpu) for (i = 0; false; ) |
| #endif |
| |
| /* |
| * Per-Core Temperature Data |
| * @last_updated: The time when the current temperature value was updated |
| * earlier (in jiffies). |
| * @cpu_core_id: The CPU Core from which temperature values should be read |
| * This value is passed as "id" field to rdmsr/wrmsr functions. |
| * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS, |
| * from where the temperature values should be read. |
| * @attr_size: Total number of pre-core attrs displayed in the sysfs. |
| * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data. |
| * Otherwise, temp_data holds coretemp data. |
| * @valid: If this is 1, the current temperature is valid. |
| */ |
| struct temp_data { |
| int temp; |
| int ttarget; |
| int tjmax; |
| unsigned long last_updated; |
| unsigned int cpu; |
| u32 cpu_core_id; |
| u32 status_reg; |
| int attr_size; |
| bool is_pkg_data; |
| bool valid; |
| struct sensor_device_attribute sd_attrs[TOTAL_ATTRS]; |
| char attr_name[TOTAL_ATTRS][CORETEMP_NAME_LENGTH]; |
| struct attribute *attrs[TOTAL_ATTRS + 1]; |
| struct attribute_group attr_group; |
| struct mutex update_lock; |
| }; |
| |
| /* Platform Data per Physical CPU */ |
| struct platform_data { |
| struct device *hwmon_dev; |
| u16 phys_proc_id; |
| struct cpumask cpumask; |
| struct temp_data *core_data[MAX_CORE_DATA]; |
| struct device_attribute name_attr; |
| }; |
| |
| struct pdev_entry { |
| struct list_head list; |
| struct platform_device *pdev; |
| u16 phys_proc_id; |
| }; |
| |
| static LIST_HEAD(pdev_list); |
| static DEFINE_MUTEX(pdev_list_mutex); |
| |
| static ssize_t show_label(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| if (tdata->is_pkg_data) |
| return sprintf(buf, "Physical id %u\n", pdata->phys_proc_id); |
| |
| return sprintf(buf, "Core %u\n", tdata->cpu_core_id); |
| } |
| |
| static ssize_t show_crit_alarm(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| u32 eax, edx; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| mutex_lock(&tdata->update_lock); |
| rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); |
| mutex_unlock(&tdata->update_lock); |
| |
| return sprintf(buf, "%d\n", (eax >> 5) & 1); |
| } |
| |
| static ssize_t show_tjmax(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tjmax); |
| } |
| |
| static ssize_t show_ttarget(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget); |
| } |
| |
| static ssize_t show_temp(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| u32 eax, edx; |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct platform_data *pdata = dev_get_drvdata(dev); |
| struct temp_data *tdata = pdata->core_data[attr->index]; |
| |
| mutex_lock(&tdata->update_lock); |
| |
| /* Check whether the time interval has elapsed */ |
| if (!tdata->valid || time_after(jiffies, tdata->last_updated + HZ)) { |
| rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); |
| /* |
| * Ignore the valid bit. In all observed cases the register |
| * value is either low or zero if the valid bit is 0. |
| * Return it instead of reporting an error which doesn't |
| * really help at all. |
| */ |
| tdata->temp = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000; |
| tdata->valid = 1; |
| tdata->last_updated = jiffies; |
| } |
| |
| mutex_unlock(&tdata->update_lock); |
| return sprintf(buf, "%d\n", tdata->temp); |
| } |
| |
| struct tjmax_pci { |
| unsigned int device; |
| int tjmax; |
| }; |
| |
| static const struct tjmax_pci tjmax_pci_table[] = { |
| { 0x0708, 110000 }, /* CE41x0 (Sodaville ) */ |
| { 0x0c72, 102000 }, /* Atom S1240 (Centerton) */ |
| { 0x0c73, 95000 }, /* Atom S1220 (Centerton) */ |
| { 0x0c75, 95000 }, /* Atom S1260 (Centerton) */ |
| }; |
| |
| struct tjmax { |
| char const *id; |
| int tjmax; |
| }; |
| |
| static const struct tjmax tjmax_table[] = { |
| { "CPU 230", 100000 }, /* Model 0x1c, stepping 2 */ |
| { "CPU 330", 125000 }, /* Model 0x1c, stepping 2 */ |
| }; |
| |
| struct tjmax_model { |
| u8 model; |
| u8 mask; |
| int tjmax; |
| }; |
| |
| #define ANY 0xff |
| |
| static const struct tjmax_model tjmax_model_table[] = { |
| { 0x1c, 10, 100000 }, /* D4xx, K4xx, N4xx, D5xx, K5xx, N5xx */ |
| { 0x1c, ANY, 90000 }, /* Z5xx, N2xx, possibly others |
| * Note: Also matches 230 and 330, |
| * which are covered by tjmax_table |
| */ |
| { 0x26, ANY, 90000 }, /* Atom Tunnel Creek (Exx), Lincroft (Z6xx) |
| * Note: TjMax for E6xxT is 110C, but CPU type |
| * is undetectable by software |
| */ |
| { 0x27, ANY, 90000 }, /* Atom Medfield (Z2460) */ |
| { 0x35, ANY, 90000 }, /* Atom Clover Trail/Cloverview (Z27x0) */ |
| { 0x36, ANY, 100000 }, /* Atom Cedar Trail/Cedarview (N2xxx, D2xxx) |
| * Also matches S12x0 (stepping 9), covered by |
| * PCI table |
| */ |
| }; |
| |
| static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) |
| { |
| /* The 100C is default for both mobile and non mobile CPUs */ |
| |
| int tjmax = 100000; |
| int tjmax_ee = 85000; |
| int usemsr_ee = 1; |
| int err; |
| u32 eax, edx; |
| int i; |
| struct pci_dev *host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); |
| |
| /* |
| * Explicit tjmax table entries override heuristics. |
| * First try PCI host bridge IDs, followed by model ID strings |
| * and model/stepping information. |
| */ |
| if (host_bridge && host_bridge->vendor == PCI_VENDOR_ID_INTEL) { |
| for (i = 0; i < ARRAY_SIZE(tjmax_pci_table); i++) { |
| if (host_bridge->device == tjmax_pci_table[i].device) |
| return tjmax_pci_table[i].tjmax; |
| } |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) { |
| if (strstr(c->x86_model_id, tjmax_table[i].id)) |
| return tjmax_table[i].tjmax; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(tjmax_model_table); i++) { |
| const struct tjmax_model *tm = &tjmax_model_table[i]; |
| if (c->x86_model == tm->model && |
| (tm->mask == ANY || c->x86_mask == tm->mask)) |
| return tm->tjmax; |
| } |
| |
| /* Early chips have no MSR for TjMax */ |
| |
| if (c->x86_model == 0xf && c->x86_mask < 4) |
| usemsr_ee = 0; |
| |
| if (c->x86_model > 0xe && usemsr_ee) { |
| u8 platform_id; |
| |
| /* |
| * Now we can detect the mobile CPU using Intel provided table |
| * http://softwarecommunity.intel.com/Wiki/Mobility/720.htm |
| * For Core2 cores, check MSR 0x17, bit 28 1 = Mobile CPU |
| */ |
| err = rdmsr_safe_on_cpu(id, 0x17, &eax, &edx); |
| if (err) { |
| dev_warn(dev, |
| "Unable to access MSR 0x17, assuming desktop" |
| " CPU\n"); |
| usemsr_ee = 0; |
| } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) { |
| /* |
| * Trust bit 28 up to Penryn, I could not find any |
| * documentation on that; if you happen to know |
| * someone at Intel please ask |
| */ |
| usemsr_ee = 0; |
| } else { |
| /* Platform ID bits 52:50 (EDX starts at bit 32) */ |
| platform_id = (edx >> 18) & 0x7; |
| |
| /* |
| * Mobile Penryn CPU seems to be platform ID 7 or 5 |
| * (guesswork) |
| */ |
| if (c->x86_model == 0x17 && |
| (platform_id == 5 || platform_id == 7)) { |
| /* |
| * If MSR EE bit is set, set it to 90 degrees C, |
| * otherwise 105 degrees C |
| */ |
| tjmax_ee = 90000; |
| tjmax = 105000; |
| } |
| } |
| } |
| |
| if (usemsr_ee) { |
| err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx); |
| if (err) { |
| dev_warn(dev, |
| "Unable to access MSR 0xEE, for Tjmax, left" |
| " at default\n"); |
| } else if (eax & 0x40000000) { |
| tjmax = tjmax_ee; |
| } |
| } else if (tjmax == 100000) { |
| /* |
| * If we don't use msr EE it means we are desktop CPU |
| * (with exeception of Atom) |
| */ |
| dev_warn(dev, "Using relative temperature scale!\n"); |
| } |
| |
| return tjmax; |
| } |
| |
| static bool cpu_has_tjmax(struct cpuinfo_x86 *c) |
| { |
| u8 model = c->x86_model; |
| |
| return model > 0xe && |
| model != 0x1c && |
| model != 0x26 && |
| model != 0x27 && |
| model != 0x35 && |
| model != 0x36; |
| } |
| |
| static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) |
| { |
| int err; |
| u32 eax, edx; |
| u32 val; |
| |
| /* |
| * A new feature of current Intel(R) processors, the |
| * IA32_TEMPERATURE_TARGET contains the TjMax value |
| */ |
| err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); |
| if (err) { |
| if (cpu_has_tjmax(c)) |
| dev_warn(dev, "Unable to read TjMax from CPU %u\n", id); |
| } else { |
| val = (eax >> 16) & 0xff; |
| /* |
| * If the TjMax is not plausible, an assumption |
| * will be used |
| */ |
| if (val) { |
| dev_dbg(dev, "TjMax is %d degrees C\n", val); |
| return val * 1000; |
| } |
| } |
| |
| if (force_tjmax) { |
| dev_notice(dev, "TjMax forced to %d degrees C by user\n", |
| force_tjmax); |
| return force_tjmax * 1000; |
| } |
| |
| /* |
| * An assumption is made for early CPUs and unreadable MSR. |
| * NOTE: the calculated value may not be correct. |
| */ |
| return adjust_tjmax(c, id, dev); |
| } |
| |
| static int create_core_attrs(struct temp_data *tdata, struct device *dev, |
| int attr_no) |
| { |
| int i; |
| static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev, |
| struct device_attribute *devattr, char *buf) = { |
| show_label, show_crit_alarm, show_temp, show_tjmax, |
| show_ttarget }; |
| static const char *const suffixes[TOTAL_ATTRS] = { |
| "label", "crit_alarm", "input", "crit", "max" |
| }; |
| |
| for (i = 0; i < tdata->attr_size; i++) { |
| snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, |
| "temp%d_%s", attr_no, suffixes[i]); |
| sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr); |
| tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i]; |
| tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; |
| tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; |
| tdata->sd_attrs[i].index = attr_no; |
| tdata->attrs[i] = &tdata->sd_attrs[i].dev_attr.attr; |
| } |
| tdata->attr_group.attrs = tdata->attrs; |
| return sysfs_create_group(&dev->kobj, &tdata->attr_group); |
| } |
| |
| |
| static int chk_ucode_version(unsigned int cpu) |
| { |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| |
| /* |
| * Check if we have problem with errata AE18 of Core processors: |
| * Readings might stop update when processor visited too deep sleep, |
| * fixed for stepping D0 (6EC). |
| */ |
| if (c->x86_model == 0xe && c->x86_mask < 0xc && c->microcode < 0x39) { |
| pr_err("Errata AE18 not fixed, update BIOS or microcode of the CPU!\n"); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static struct platform_device *coretemp_get_pdev(unsigned int cpu) |
| { |
| u16 phys_proc_id = TO_PHYS_ID(cpu); |
| struct pdev_entry *p; |
| |
| mutex_lock(&pdev_list_mutex); |
| |
| list_for_each_entry(p, &pdev_list, list) |
| if (p->phys_proc_id == phys_proc_id) { |
| mutex_unlock(&pdev_list_mutex); |
| return p->pdev; |
| } |
| |
| mutex_unlock(&pdev_list_mutex); |
| return NULL; |
| } |
| |
| static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) |
| { |
| struct temp_data *tdata; |
| |
| tdata = kzalloc(sizeof(struct temp_data), GFP_KERNEL); |
| if (!tdata) |
| return NULL; |
| |
| tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS : |
| MSR_IA32_THERM_STATUS; |
| tdata->is_pkg_data = pkg_flag; |
| tdata->cpu = cpu; |
| tdata->cpu_core_id = TO_CORE_ID(cpu); |
| tdata->attr_size = MAX_CORE_ATTRS; |
| mutex_init(&tdata->update_lock); |
| return tdata; |
| } |
| |
| static int create_core_data(struct platform_device *pdev, unsigned int cpu, |
| int pkg_flag) |
| { |
| struct temp_data *tdata; |
| struct platform_data *pdata = platform_get_drvdata(pdev); |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| u32 eax, edx; |
| int err, attr_no; |
| |
| /* |
| * Find attr number for sysfs: |
| * We map the attr number to core id of the CPU |
| * The attr number is always core id + 2 |
| * The Pkgtemp will always show up as temp1_*, if available |
| */ |
| attr_no = pkg_flag ? PKG_SYSFS_ATTR_NO : TO_ATTR_NO(cpu); |
| |
| if (attr_no > MAX_CORE_DATA - 1) |
| return -ERANGE; |
| |
| tdata = init_temp_data(cpu, pkg_flag); |
| if (!tdata) |
| return -ENOMEM; |
| |
| /* Test if we can access the status register */ |
| err = rdmsr_safe_on_cpu(cpu, tdata->status_reg, &eax, &edx); |
| if (err) |
| goto exit_free; |
| |
| /* We can access status register. Get Critical Temperature */ |
| tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); |
| |
| /* |
| * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET. |
| * The target temperature is available on older CPUs but not in this |
| * register. Atoms don't have the register at all. |
| */ |
| if (c->x86_model > 0xe && c->x86_model != 0x1c) { |
| err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, |
| &eax, &edx); |
| if (!err) { |
| tdata->ttarget |
| = tdata->tjmax - ((eax >> 8) & 0xff) * 1000; |
| tdata->attr_size++; |
| } |
| } |
| |
| pdata->core_data[attr_no] = tdata; |
| |
| /* Create sysfs interfaces */ |
| err = create_core_attrs(tdata, pdata->hwmon_dev, attr_no); |
| if (err) |
| goto exit_free; |
| |
| return 0; |
| exit_free: |
| pdata->core_data[attr_no] = NULL; |
| kfree(tdata); |
| return err; |
| } |
| |
| static void |
| coretemp_add_core(struct platform_device *pdev, unsigned int cpu, int pkg_flag) |
| { |
| if (create_core_data(pdev, cpu, pkg_flag)) |
| dev_err(&pdev->dev, "Adding Core %u failed\n", cpu); |
| } |
| |
| static void coretemp_remove_core(struct platform_data *pdata, int indx) |
| { |
| struct temp_data *tdata = pdata->core_data[indx]; |
| |
| /* Remove the sysfs attributes */ |
| sysfs_remove_group(&pdata->hwmon_dev->kobj, &tdata->attr_group); |
| |
| kfree(pdata->core_data[indx]); |
| pdata->core_data[indx] = NULL; |
| } |
| |
| static int coretemp_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct platform_data *pdata; |
| |
| /* Initialize the per-package data structures */ |
| pdata = devm_kzalloc(dev, sizeof(struct platform_data), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| pdata->phys_proc_id = pdev->id; |
| platform_set_drvdata(pdev, pdata); |
| |
| pdata->hwmon_dev = devm_hwmon_device_register_with_groups(dev, DRVNAME, |
| pdata, NULL); |
| return PTR_ERR_OR_ZERO(pdata->hwmon_dev); |
| } |
| |
| static int coretemp_remove(struct platform_device *pdev) |
| { |
| struct platform_data *pdata = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = MAX_CORE_DATA - 1; i >= 0; --i) |
| if (pdata->core_data[i]) |
| coretemp_remove_core(pdata, i); |
| |
| return 0; |
| } |
| |
| static struct platform_driver coretemp_driver = { |
| .driver = { |
| .name = DRVNAME, |
| }, |
| .probe = coretemp_probe, |
| .remove = coretemp_remove, |
| }; |
| |
| static int coretemp_device_add(unsigned int cpu) |
| { |
| int err; |
| struct platform_device *pdev; |
| struct pdev_entry *pdev_entry; |
| |
| mutex_lock(&pdev_list_mutex); |
| |
| pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu)); |
| if (!pdev) { |
| err = -ENOMEM; |
| pr_err("Device allocation failed\n"); |
| goto exit; |
| } |
| |
| pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); |
| if (!pdev_entry) { |
| err = -ENOMEM; |
| goto exit_device_put; |
| } |
| |
| err = platform_device_add(pdev); |
| if (err) { |
| pr_err("Device addition failed (%d)\n", err); |
| goto exit_device_free; |
| } |
| |
| pdev_entry->pdev = pdev; |
| pdev_entry->phys_proc_id = pdev->id; |
| |
| list_add_tail(&pdev_entry->list, &pdev_list); |
| mutex_unlock(&pdev_list_mutex); |
| |
| return 0; |
| |
| exit_device_free: |
| kfree(pdev_entry); |
| exit_device_put: |
| platform_device_put(pdev); |
| exit: |
| mutex_unlock(&pdev_list_mutex); |
| return err; |
| } |
| |
| static void coretemp_device_remove(unsigned int cpu) |
| { |
| struct pdev_entry *p, *n; |
| u16 phys_proc_id = TO_PHYS_ID(cpu); |
| |
| mutex_lock(&pdev_list_mutex); |
| list_for_each_entry_safe(p, n, &pdev_list, list) { |
| if (p->phys_proc_id != phys_proc_id) |
| continue; |
| platform_device_unregister(p->pdev); |
| list_del(&p->list); |
| kfree(p); |
| } |
| mutex_unlock(&pdev_list_mutex); |
| } |
| |
| static void get_core_online(unsigned int cpu) |
| { |
| struct platform_device *pdev = coretemp_get_pdev(cpu); |
| struct cpuinfo_x86 *c = &cpu_data(cpu); |
| struct platform_data *pdata; |
| int err; |
| |
| /* |
| * CPUID.06H.EAX[0] indicates whether the CPU has thermal |
| * sensors. We check this bit only, all the early CPUs |
| * without thermal sensors will be filtered out. |
| */ |
| if (!cpu_has(c, X86_FEATURE_DTHERM)) |
| return; |
| |
| if (!pdev) { |
| /* Check the microcode version of the CPU */ |
| if (chk_ucode_version(cpu)) |
| return; |
| |
| /* |
| * Alright, we have DTS support. |
| * We are bringing the _first_ core in this pkg |
| * online. So, initialize per-pkg data structures and |
| * then bring this core online. |
| */ |
| err = coretemp_device_add(cpu); |
| if (err) |
| return; |
| |
| pdev = coretemp_get_pdev(cpu); |
| /* |
| * Check whether pkgtemp support is available. |
| * If so, add interfaces for pkgtemp. |
| */ |
| if (cpu_has(c, X86_FEATURE_PTS)) |
| coretemp_add_core(pdev, cpu, 1); |
| } |
| |
| pdata = platform_get_drvdata(pdev); |
| /* |
| * Check whether a thread sibling is already online. If not add the |
| * interface for this CPU core. |
| */ |
| if (!cpumask_intersects(&pdata->cpumask, topology_sibling_cpumask(cpu))) |
| coretemp_add_core(pdev, cpu, 0); |
| |
| cpumask_set_cpu(cpu, &pdata->cpumask); |
| } |
| |
| static void put_core_offline(unsigned int cpu) |
| { |
| struct platform_device *pdev = coretemp_get_pdev(cpu); |
| struct platform_data *pd; |
| struct temp_data *tdata; |
| int indx, target; |
| |
| /* If the physical CPU device does not exist, just return */ |
| if (!pdev) |
| return; |
| |
| /* The core id is too big, just return */ |
| indx = TO_ATTR_NO(cpu); |
| if (indx > MAX_CORE_DATA - 1) |
| return; |
| |
| pd = platform_get_drvdata(pdev); |
| tdata = pd->core_data[indx]; |
| |
| cpumask_clear_cpu(cpu, &pd->cpumask); |
| |
| /* |
| * If this is the last thread sibling, remove the CPU core |
| * interface, If there is still a sibling online, transfer the |
| * target cpu of that core interface to it. |
| */ |
| target = cpumask_any_and(&pd->cpumask, topology_sibling_cpumask(cpu)); |
| if (target >= nr_cpu_ids) { |
| coretemp_remove_core(pd, indx); |
| } else if (tdata && tdata->cpu == cpu) { |
| mutex_lock(&tdata->update_lock); |
| tdata->cpu = target; |
| mutex_unlock(&tdata->update_lock); |
| } |
| |
| /* |
| * If all cores in this pkg are offline, remove the device. |
| * coretemp_device_remove calls unregister_platform_device, |
| * which in turn calls coretemp_remove. This removes the |
| * pkgtemp entry and does other clean ups. |
| */ |
| if (cpumask_empty(&pd->cpumask)) { |
| coretemp_device_remove(cpu); |
| return; |
| } |
| /* |
| * Check whether this core is the target for the package |
| * interface. We need to assign it to some other cpu. |
| */ |
| tdata = pd->core_data[PKG_SYSFS_ATTR_NO]; |
| if (tdata && tdata->cpu == cpu) { |
| target = cpumask_first(&pd->cpumask); |
| mutex_lock(&tdata->update_lock); |
| tdata->cpu = target; |
| mutex_unlock(&tdata->update_lock); |
| } |
| } |
| |
| static int coretemp_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| unsigned int cpu = (unsigned long) hcpu; |
| |
| switch (action) { |
| case CPU_ONLINE: |
| case CPU_DOWN_FAILED: |
| get_core_online(cpu); |
| break; |
| case CPU_DOWN_PREPARE: |
| put_core_offline(cpu); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block coretemp_cpu_notifier __refdata = { |
| .notifier_call = coretemp_cpu_callback, |
| }; |
| |
| static const struct x86_cpu_id __initconst coretemp_ids[] = { |
| { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTHERM }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, coretemp_ids); |
| |
| static int __init coretemp_init(void) |
| { |
| int i, err; |
| |
| /* |
| * CPUID.06H.EAX[0] indicates whether the CPU has thermal |
| * sensors. We check this bit only, all the early CPUs |
| * without thermal sensors will be filtered out. |
| */ |
| if (!x86_match_cpu(coretemp_ids)) |
| return -ENODEV; |
| |
| err = platform_driver_register(&coretemp_driver); |
| if (err) |
| goto exit; |
| |
| cpu_notifier_register_begin(); |
| for_each_online_cpu(i) |
| get_core_online(i); |
| |
| #ifndef CONFIG_HOTPLUG_CPU |
| if (list_empty(&pdev_list)) { |
| cpu_notifier_register_done(); |
| err = -ENODEV; |
| goto exit_driver_unreg; |
| } |
| #endif |
| |
| __register_hotcpu_notifier(&coretemp_cpu_notifier); |
| cpu_notifier_register_done(); |
| return 0; |
| |
| #ifndef CONFIG_HOTPLUG_CPU |
| exit_driver_unreg: |
| platform_driver_unregister(&coretemp_driver); |
| #endif |
| exit: |
| return err; |
| } |
| |
| static void __exit coretemp_exit(void) |
| { |
| struct pdev_entry *p, *n; |
| |
| cpu_notifier_register_begin(); |
| __unregister_hotcpu_notifier(&coretemp_cpu_notifier); |
| mutex_lock(&pdev_list_mutex); |
| list_for_each_entry_safe(p, n, &pdev_list, list) { |
| platform_device_unregister(p->pdev); |
| list_del(&p->list); |
| kfree(p); |
| } |
| mutex_unlock(&pdev_list_mutex); |
| cpu_notifier_register_done(); |
| platform_driver_unregister(&coretemp_driver); |
| } |
| |
| MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>"); |
| MODULE_DESCRIPTION("Intel Core temperature monitor"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(coretemp_init) |
| module_exit(coretemp_exit) |