| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Altera University Program PS2 controller driver |
| * |
| * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * Based on sa1111ps2.c, which is: |
| * Copyright (C) 2002 Russell King |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/input.h> |
| #include <linux/serio.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/of.h> |
| |
| #define DRV_NAME "altera_ps2" |
| |
| struct ps2if { |
| struct serio *io; |
| void __iomem *base; |
| }; |
| |
| /* |
| * Read all bytes waiting in the PS2 port. There should be |
| * at the most one, but we loop for safety. |
| */ |
| static irqreturn_t altera_ps2_rxint(int irq, void *dev_id) |
| { |
| struct ps2if *ps2if = dev_id; |
| unsigned int status; |
| irqreturn_t handled = IRQ_NONE; |
| |
| while ((status = readl(ps2if->base)) & 0xffff0000) { |
| serio_interrupt(ps2if->io, status & 0xff, 0); |
| handled = IRQ_HANDLED; |
| } |
| |
| return handled; |
| } |
| |
| /* |
| * Write a byte to the PS2 port. |
| */ |
| static int altera_ps2_write(struct serio *io, unsigned char val) |
| { |
| struct ps2if *ps2if = io->port_data; |
| |
| writel(val, ps2if->base); |
| return 0; |
| } |
| |
| static int altera_ps2_open(struct serio *io) |
| { |
| struct ps2if *ps2if = io->port_data; |
| |
| /* clear fifo */ |
| while (readl(ps2if->base) & 0xffff0000) |
| /* empty */; |
| |
| writel(1, ps2if->base + 4); /* enable rx irq */ |
| return 0; |
| } |
| |
| static void altera_ps2_close(struct serio *io) |
| { |
| struct ps2if *ps2if = io->port_data; |
| |
| writel(0, ps2if->base + 4); /* disable rx irq */ |
| } |
| |
| /* |
| * Add one device to this driver. |
| */ |
| static int altera_ps2_probe(struct platform_device *pdev) |
| { |
| struct ps2if *ps2if; |
| struct serio *serio; |
| int error, irq; |
| |
| ps2if = devm_kzalloc(&pdev->dev, sizeof(struct ps2if), GFP_KERNEL); |
| if (!ps2if) |
| return -ENOMEM; |
| |
| ps2if->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(ps2if->base)) |
| return PTR_ERR(ps2if->base); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return -ENXIO; |
| |
| error = devm_request_irq(&pdev->dev, irq, altera_ps2_rxint, 0, |
| pdev->name, ps2if); |
| if (error) { |
| dev_err(&pdev->dev, "could not request IRQ %d\n", irq); |
| return error; |
| } |
| |
| serio = kzalloc(sizeof(struct serio), GFP_KERNEL); |
| if (!serio) |
| return -ENOMEM; |
| |
| serio->id.type = SERIO_8042; |
| serio->write = altera_ps2_write; |
| serio->open = altera_ps2_open; |
| serio->close = altera_ps2_close; |
| strscpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name)); |
| strscpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys)); |
| serio->port_data = ps2if; |
| serio->dev.parent = &pdev->dev; |
| ps2if->io = serio; |
| |
| dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, irq); |
| |
| serio_register_port(ps2if->io); |
| platform_set_drvdata(pdev, ps2if); |
| |
| return 0; |
| } |
| |
| /* |
| * Remove one device from this driver. |
| */ |
| static int altera_ps2_remove(struct platform_device *pdev) |
| { |
| struct ps2if *ps2if = platform_get_drvdata(pdev); |
| |
| serio_unregister_port(ps2if->io); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id altera_ps2_match[] = { |
| { .compatible = "ALTR,ps2-1.0", }, |
| { .compatible = "altr,ps2-1.0", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, altera_ps2_match); |
| #endif /* CONFIG_OF */ |
| |
| /* |
| * Our device driver structure |
| */ |
| static struct platform_driver altera_ps2_driver = { |
| .probe = altera_ps2_probe, |
| .remove = altera_ps2_remove, |
| .driver = { |
| .name = DRV_NAME, |
| .of_match_table = of_match_ptr(altera_ps2_match), |
| }, |
| }; |
| module_platform_driver(altera_ps2_driver); |
| |
| MODULE_DESCRIPTION("Altera University Program PS2 controller driver"); |
| MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRV_NAME); |