| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Generic Exynos Bus frequency driver with DEVFREQ Framework |
| * |
| * Copyright (c) 2016 Samsung Electronics Co., Ltd. |
| * Author : Chanwoo Choi <cw00.choi@samsung.com> |
| * |
| * This driver support Exynos Bus frequency feature by using |
| * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/devfreq.h> |
| #include <linux/devfreq-event.h> |
| #include <linux/device.h> |
| #include <linux/export.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/pm_opp.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| |
| #define DEFAULT_SATURATION_RATIO 40 |
| |
| struct exynos_bus { |
| struct device *dev; |
| struct platform_device *icc_pdev; |
| |
| struct devfreq *devfreq; |
| struct devfreq_event_dev **edev; |
| unsigned int edev_count; |
| struct mutex lock; |
| |
| unsigned long curr_freq; |
| |
| int opp_token; |
| struct clk *clk; |
| unsigned int ratio; |
| }; |
| |
| /* |
| * Control the devfreq-event device to get the current state of bus |
| */ |
| #define exynos_bus_ops_edev(ops) \ |
| static int exynos_bus_##ops(struct exynos_bus *bus) \ |
| { \ |
| int i, ret; \ |
| \ |
| for (i = 0; i < bus->edev_count; i++) { \ |
| if (!bus->edev[i]) \ |
| continue; \ |
| ret = devfreq_event_##ops(bus->edev[i]); \ |
| if (ret < 0) \ |
| return ret; \ |
| } \ |
| \ |
| return 0; \ |
| } |
| exynos_bus_ops_edev(enable_edev); |
| exynos_bus_ops_edev(disable_edev); |
| exynos_bus_ops_edev(set_event); |
| |
| static int exynos_bus_get_event(struct exynos_bus *bus, |
| struct devfreq_event_data *edata) |
| { |
| struct devfreq_event_data event_data; |
| unsigned long load_count = 0, total_count = 0; |
| int i, ret = 0; |
| |
| for (i = 0; i < bus->edev_count; i++) { |
| if (!bus->edev[i]) |
| continue; |
| |
| ret = devfreq_event_get_event(bus->edev[i], &event_data); |
| if (ret < 0) |
| return ret; |
| |
| if (i == 0 || event_data.load_count > load_count) { |
| load_count = event_data.load_count; |
| total_count = event_data.total_count; |
| } |
| } |
| |
| edata->load_count = load_count; |
| edata->total_count = total_count; |
| |
| return ret; |
| } |
| |
| /* |
| * devfreq function for both simple-ondemand and passive governor |
| */ |
| static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| struct dev_pm_opp *new_opp; |
| int ret = 0; |
| |
| /* Get correct frequency for bus. */ |
| new_opp = devfreq_recommended_opp(dev, freq, flags); |
| if (IS_ERR(new_opp)) { |
| dev_err(dev, "failed to get recommended opp instance\n"); |
| return PTR_ERR(new_opp); |
| } |
| |
| dev_pm_opp_put(new_opp); |
| |
| /* Change voltage and frequency according to new OPP level */ |
| mutex_lock(&bus->lock); |
| ret = dev_pm_opp_set_rate(dev, *freq); |
| if (!ret) |
| bus->curr_freq = *freq; |
| |
| mutex_unlock(&bus->lock); |
| |
| return ret; |
| } |
| |
| static int exynos_bus_get_dev_status(struct device *dev, |
| struct devfreq_dev_status *stat) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| struct devfreq_event_data edata; |
| int ret; |
| |
| stat->current_frequency = bus->curr_freq; |
| |
| ret = exynos_bus_get_event(bus, &edata); |
| if (ret < 0) { |
| dev_err(dev, "failed to get event from devfreq-event devices\n"); |
| stat->total_time = stat->busy_time = 0; |
| goto err; |
| } |
| |
| stat->busy_time = (edata.load_count * 100) / bus->ratio; |
| stat->total_time = edata.total_count; |
| |
| dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time, |
| stat->total_time); |
| |
| err: |
| ret = exynos_bus_set_event(bus); |
| if (ret < 0) { |
| dev_err(dev, "failed to set event to devfreq-event devices\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static void exynos_bus_exit(struct device *dev) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = exynos_bus_disable_edev(bus); |
| if (ret < 0) |
| dev_warn(dev, "failed to disable the devfreq-event devices\n"); |
| |
| platform_device_unregister(bus->icc_pdev); |
| |
| dev_pm_opp_of_remove_table(dev); |
| clk_disable_unprepare(bus->clk); |
| dev_pm_opp_put_regulators(bus->opp_token); |
| } |
| |
| static void exynos_bus_passive_exit(struct device *dev) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| |
| platform_device_unregister(bus->icc_pdev); |
| |
| dev_pm_opp_of_remove_table(dev); |
| clk_disable_unprepare(bus->clk); |
| } |
| |
| static int exynos_bus_parent_parse_of(struct device_node *np, |
| struct exynos_bus *bus) |
| { |
| struct device *dev = bus->dev; |
| const char *supplies[] = { "vdd", NULL }; |
| int i, ret, count, size; |
| |
| ret = dev_pm_opp_set_regulators(dev, supplies); |
| if (ret < 0) { |
| dev_err(dev, "failed to set regulators %d\n", ret); |
| return ret; |
| } |
| |
| bus->opp_token = ret; |
| |
| /* |
| * Get the devfreq-event devices to get the current utilization of |
| * buses. This raw data will be used in devfreq ondemand governor. |
| */ |
| count = devfreq_event_get_edev_count(dev, "devfreq-events"); |
| if (count < 0) { |
| dev_err(dev, "failed to get the count of devfreq-event dev\n"); |
| ret = count; |
| goto err_regulator; |
| } |
| bus->edev_count = count; |
| |
| size = sizeof(*bus->edev) * count; |
| bus->edev = devm_kzalloc(dev, size, GFP_KERNEL); |
| if (!bus->edev) { |
| ret = -ENOMEM; |
| goto err_regulator; |
| } |
| |
| for (i = 0; i < count; i++) { |
| bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, |
| "devfreq-events", i); |
| if (IS_ERR(bus->edev[i])) { |
| ret = -EPROBE_DEFER; |
| goto err_regulator; |
| } |
| } |
| |
| /* |
| * Optionally, Get the saturation ratio according to Exynos SoC |
| * When measuring the utilization of each AXI bus with devfreq-event |
| * devices, the measured real cycle might be much lower than the |
| * total cycle of bus during sampling rate. In result, the devfreq |
| * simple-ondemand governor might not decide to change the current |
| * frequency due to too utilization (= real cycle/total cycle). |
| * So, this property is used to adjust the utilization when calculating |
| * the busy_time in exynos_bus_get_dev_status(). |
| */ |
| if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio)) |
| bus->ratio = DEFAULT_SATURATION_RATIO; |
| |
| return 0; |
| |
| err_regulator: |
| dev_pm_opp_put_regulators(bus->opp_token); |
| |
| return ret; |
| } |
| |
| static int exynos_bus_parse_of(struct device_node *np, |
| struct exynos_bus *bus) |
| { |
| struct device *dev = bus->dev; |
| struct dev_pm_opp *opp; |
| unsigned long rate; |
| int ret; |
| |
| /* Get the clock to provide each bus with source clock */ |
| bus->clk = devm_clk_get(dev, "bus"); |
| if (IS_ERR(bus->clk)) { |
| dev_err(dev, "failed to get bus clock\n"); |
| return PTR_ERR(bus->clk); |
| } |
| |
| ret = clk_prepare_enable(bus->clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get enable clock\n"); |
| return ret; |
| } |
| |
| /* Get the freq and voltage from OPP table to scale the bus freq */ |
| ret = dev_pm_opp_of_add_table(dev); |
| if (ret < 0) { |
| dev_err(dev, "failed to get OPP table\n"); |
| goto err_clk; |
| } |
| |
| rate = clk_get_rate(bus->clk); |
| |
| opp = devfreq_recommended_opp(dev, &rate, 0); |
| if (IS_ERR(opp)) { |
| dev_err(dev, "failed to find dev_pm_opp\n"); |
| ret = PTR_ERR(opp); |
| goto err_opp; |
| } |
| bus->curr_freq = dev_pm_opp_get_freq(opp); |
| dev_pm_opp_put(opp); |
| |
| return 0; |
| |
| err_opp: |
| dev_pm_opp_of_remove_table(dev); |
| err_clk: |
| clk_disable_unprepare(bus->clk); |
| |
| return ret; |
| } |
| |
| static int exynos_bus_profile_init(struct exynos_bus *bus, |
| struct devfreq_dev_profile *profile) |
| { |
| struct device *dev = bus->dev; |
| struct devfreq_simple_ondemand_data *ondemand_data; |
| int ret; |
| |
| /* Initialize the struct profile and governor data for parent device */ |
| profile->polling_ms = 50; |
| profile->target = exynos_bus_target; |
| profile->get_dev_status = exynos_bus_get_dev_status; |
| profile->exit = exynos_bus_exit; |
| |
| ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL); |
| if (!ondemand_data) |
| return -ENOMEM; |
| |
| ondemand_data->upthreshold = 40; |
| ondemand_data->downdifferential = 5; |
| |
| /* Add devfreq device to monitor and handle the exynos bus */ |
| bus->devfreq = devm_devfreq_add_device(dev, profile, |
| DEVFREQ_GOV_SIMPLE_ONDEMAND, |
| ondemand_data); |
| if (IS_ERR(bus->devfreq)) { |
| dev_err(dev, "failed to add devfreq device\n"); |
| return PTR_ERR(bus->devfreq); |
| } |
| |
| /* Register opp_notifier to catch the change of OPP */ |
| ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq); |
| if (ret < 0) { |
| dev_err(dev, "failed to register opp notifier\n"); |
| return ret; |
| } |
| |
| /* |
| * Enable devfreq-event to get raw data which is used to determine |
| * current bus load. |
| */ |
| ret = exynos_bus_enable_edev(bus); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable devfreq-event devices\n"); |
| return ret; |
| } |
| |
| ret = exynos_bus_set_event(bus); |
| if (ret < 0) { |
| dev_err(dev, "failed to set event to devfreq-event devices\n"); |
| goto err_edev; |
| } |
| |
| return 0; |
| |
| err_edev: |
| if (exynos_bus_disable_edev(bus)) |
| dev_warn(dev, "failed to disable the devfreq-event devices\n"); |
| |
| return ret; |
| } |
| |
| static int exynos_bus_profile_init_passive(struct exynos_bus *bus, |
| struct devfreq_dev_profile *profile) |
| { |
| struct device *dev = bus->dev; |
| struct devfreq_passive_data *passive_data; |
| struct devfreq *parent_devfreq; |
| |
| /* Initialize the struct profile and governor data for passive device */ |
| profile->target = exynos_bus_target; |
| profile->exit = exynos_bus_passive_exit; |
| |
| /* Get the instance of parent devfreq device */ |
| parent_devfreq = devfreq_get_devfreq_by_phandle(dev, "devfreq", 0); |
| if (IS_ERR(parent_devfreq)) |
| return -EPROBE_DEFER; |
| |
| passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); |
| if (!passive_data) |
| return -ENOMEM; |
| |
| passive_data->parent = parent_devfreq; |
| |
| /* Add devfreq device for exynos bus with passive governor */ |
| bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE, |
| passive_data); |
| if (IS_ERR(bus->devfreq)) { |
| dev_err(dev, |
| "failed to add devfreq dev with passive governor\n"); |
| return PTR_ERR(bus->devfreq); |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_bus_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node, *node; |
| struct devfreq_dev_profile *profile; |
| struct exynos_bus *bus; |
| int ret, max_state; |
| unsigned long min_freq, max_freq; |
| bool passive = false; |
| |
| if (!np) { |
| dev_err(dev, "failed to find devicetree node\n"); |
| return -EINVAL; |
| } |
| |
| bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); |
| if (!bus) |
| return -ENOMEM; |
| mutex_init(&bus->lock); |
| bus->dev = &pdev->dev; |
| platform_set_drvdata(pdev, bus); |
| |
| profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL); |
| if (!profile) |
| return -ENOMEM; |
| |
| node = of_parse_phandle(dev->of_node, "devfreq", 0); |
| if (node) { |
| of_node_put(node); |
| passive = true; |
| } else { |
| ret = exynos_bus_parent_parse_of(np, bus); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Parse the device-tree to get the resource information */ |
| ret = exynos_bus_parse_of(np, bus); |
| if (ret < 0) |
| goto err_reg; |
| |
| if (passive) |
| ret = exynos_bus_profile_init_passive(bus, profile); |
| else |
| ret = exynos_bus_profile_init(bus, profile); |
| |
| if (ret < 0) |
| goto err; |
| |
| /* Create child platform device for the interconnect provider */ |
| if (of_property_present(dev->of_node, "#interconnect-cells")) { |
| bus->icc_pdev = platform_device_register_data( |
| dev, "exynos-generic-icc", |
| PLATFORM_DEVID_AUTO, NULL, 0); |
| |
| if (IS_ERR(bus->icc_pdev)) { |
| ret = PTR_ERR(bus->icc_pdev); |
| goto err; |
| } |
| } |
| |
| max_state = bus->devfreq->max_state; |
| min_freq = (bus->devfreq->freq_table[0] / 1000); |
| max_freq = (bus->devfreq->freq_table[max_state - 1] / 1000); |
| pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n", |
| dev_name(dev), min_freq, max_freq); |
| |
| return 0; |
| |
| err: |
| dev_pm_opp_of_remove_table(dev); |
| clk_disable_unprepare(bus->clk); |
| err_reg: |
| dev_pm_opp_put_regulators(bus->opp_token); |
| |
| return ret; |
| } |
| |
| static void exynos_bus_shutdown(struct platform_device *pdev) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(&pdev->dev); |
| |
| devfreq_suspend_device(bus->devfreq); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int exynos_bus_resume(struct device *dev) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = exynos_bus_enable_edev(bus); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable the devfreq-event devices\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int exynos_bus_suspend(struct device *dev) |
| { |
| struct exynos_bus *bus = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = exynos_bus_disable_edev(bus); |
| if (ret < 0) { |
| dev_err(dev, "failed to disable the devfreq-event devices\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops exynos_bus_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume) |
| }; |
| |
| static const struct of_device_id exynos_bus_of_match[] = { |
| { .compatible = "samsung,exynos-bus", }, |
| { /* sentinel */ }, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_bus_of_match); |
| |
| static struct platform_driver exynos_bus_platdrv = { |
| .probe = exynos_bus_probe, |
| .shutdown = exynos_bus_shutdown, |
| .driver = { |
| .name = "exynos-bus", |
| .pm = &exynos_bus_pm, |
| .of_match_table = exynos_bus_of_match, |
| }, |
| }; |
| module_platform_driver(exynos_bus_platdrv); |
| |
| MODULE_SOFTDEP("pre: exynos_ppmu"); |
| MODULE_DESCRIPTION("Generic Exynos Bus frequency driver"); |
| MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); |
| MODULE_LICENSE("GPL v2"); |