| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_device.h> |
| |
| #include "usb.h" |
| #include "scsiglue.h" |
| #include "transport.h" |
| #include "init.h" |
| |
| /* |
| * ENE_InitMedia(): |
| */ |
| int ENE_InitMedia(struct us_data *us) |
| { |
| int result; |
| BYTE MiscReg03 = 0; |
| |
| dev_info(&us->pusb_dev->dev, "--- Init Media ---\n"); |
| result = ene_read_byte(us, REG_CARD_STATUS, &MiscReg03); |
| if (result != USB_STOR_XFER_GOOD) { |
| dev_err(&us->pusb_dev->dev, "Failed to read register\n"); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| dev_info(&us->pusb_dev->dev, "MiscReg03 = %x\n", MiscReg03); |
| |
| if (MiscReg03 & 0x02) { |
| if (!us->SM_Status.Ready && !us->MS_Status.Ready) { |
| result = ENE_SMInit(us); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| } |
| return result; |
| } |
| |
| /* |
| * ene_read_byte() : |
| */ |
| int ene_read_byte(struct us_data *us, WORD index, void *buf) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| int result; |
| |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = 0x01; |
| bcb->Flags = 0x80; |
| bcb->CDB[0] = 0xED; |
| bcb->CDB[2] = (BYTE)(index>>8); |
| bcb->CDB[3] = (BYTE)index; |
| |
| result = ENE_SendScsiCmd(us, FDIR_READ, buf, 0); |
| return result; |
| } |
| |
| /* |
| *ENE_SMInit() |
| */ |
| int ENE_SMInit(struct us_data *us) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| int result; |
| BYTE buf[0x200]; |
| |
| dev_dbg(&us->pusb_dev->dev, "transport --- ENE_SMInit\n"); |
| |
| result = ENE_LoadBinCode(us, SM_INIT_PATTERN); |
| if (result != USB_STOR_XFER_GOOD) { |
| dev_info(&us->pusb_dev->dev, |
| "Failed to load SmartMedia init code\n: result= %x\n", |
| result); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = 0x200; |
| bcb->Flags = 0x80; |
| bcb->CDB[0] = 0xF1; |
| bcb->CDB[1] = 0x01; |
| |
| result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0); |
| if (result != USB_STOR_XFER_GOOD) { |
| dev_err(&us->pusb_dev->dev, |
| "Failed to load SmartMedia init code: result = %x\n", |
| result); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| us->SM_Status = *(struct keucr_sm_status *)&buf[0]; |
| |
| us->SM_DeviceID = buf[1]; |
| us->SM_CardID = buf[2]; |
| |
| if (us->SM_Status.Insert && us->SM_Status.Ready) { |
| dev_info(&us->pusb_dev->dev, "Insert = %x\n", |
| us->SM_Status.Insert); |
| dev_info(&us->pusb_dev->dev, "Ready = %x\n", |
| us->SM_Status.Ready); |
| dev_info(&us->pusb_dev->dev, "WtP = %x\n", |
| us->SM_Status.WtP); |
| dev_info(&us->pusb_dev->dev, "DeviceID = %x\n", |
| us->SM_DeviceID); |
| dev_info(&us->pusb_dev->dev, "CardID = %x\n", |
| us->SM_CardID); |
| MediaChange = 1; |
| Check_D_MediaFmt(us); |
| } else { |
| dev_err(&us->pusb_dev->dev, |
| "SmartMedia Card Not Ready --- %x\n", buf[0]); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * ENE_LoadBinCode() |
| */ |
| int ENE_LoadBinCode(struct us_data *us, BYTE flag) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| int result; |
| /* void *buf; */ |
| PBYTE buf; |
| |
| /* dev_info(&us->pusb_dev->dev, "transport --- ENE_LoadBinCode\n"); */ |
| if (us->BIN_FLAG == flag) |
| return USB_STOR_TRANSPORT_GOOD; |
| |
| buf = kmalloc(0x800, GFP_KERNEL); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| switch (flag) { |
| /* For SS */ |
| case SM_INIT_PATTERN: |
| dev_dbg(&us->pusb_dev->dev, "SM_INIT_PATTERN\n"); |
| memcpy(buf, SM_Init, 0x800); |
| break; |
| case SM_RW_PATTERN: |
| dev_dbg(&us->pusb_dev->dev, "SM_RW_PATTERN\n"); |
| memcpy(buf, SM_Rdwr, 0x800); |
| break; |
| } |
| |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = 0x800; |
| bcb->Flags = 0x00; |
| bcb->CDB[0] = 0xEF; |
| |
| result = ENE_SendScsiCmd(us, FDIR_WRITE, buf, 0); |
| |
| kfree(buf); |
| us->BIN_FLAG = flag; |
| return result; |
| } |
| |
| /* |
| * ENE_SendScsiCmd(): |
| */ |
| int ENE_SendScsiCmd(struct us_data *us, BYTE fDir, void *buf, int use_sg) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; |
| |
| int result; |
| unsigned int transfer_length = bcb->DataTransferLength, |
| cswlen = 0, partial = 0; |
| unsigned int residue; |
| |
| /* dev_dbg(&us->pusb_dev->dev, "transport --- ENE_SendScsiCmd\n"); */ |
| /* send cmd to out endpoint */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| bcb, US_BULK_CB_WRAP_LEN, NULL); |
| if (result != USB_STOR_XFER_GOOD) { |
| dev_err(&us->pusb_dev->dev, |
| "send cmd to out endpoint fail ---\n"); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| if (buf) { |
| unsigned int pipe = fDir; |
| |
| if (fDir == FDIR_READ) |
| pipe = us->recv_bulk_pipe; |
| else |
| pipe = us->send_bulk_pipe; |
| |
| /* Bulk */ |
| if (use_sg) |
| result = usb_stor_bulk_srb(us, pipe, us->srb); |
| else |
| result = usb_stor_bulk_transfer_sg(us, pipe, buf, |
| transfer_length, 0, &partial); |
| if (result != USB_STOR_XFER_GOOD) { |
| dev_err(&us->pusb_dev->dev, "data transfer fail ---\n"); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| } |
| |
| /* Get CSW for device status */ |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, |
| US_BULK_CS_WRAP_LEN, &cswlen); |
| |
| if (result == USB_STOR_XFER_SHORT && cswlen == 0) { |
| dev_warn(&us->pusb_dev->dev, |
| "Received 0-length CSW; retrying...\n"); |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| bcs, US_BULK_CS_WRAP_LEN, &cswlen); |
| } |
| |
| if (result == USB_STOR_XFER_STALLED) { |
| /* get the status again */ |
| dev_warn(&us->pusb_dev->dev, |
| "Attempting to get CSW (2nd try)...\n"); |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| bcs, US_BULK_CS_WRAP_LEN, NULL); |
| } |
| |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* check bulk status */ |
| residue = le32_to_cpu(bcs->Residue); |
| |
| /* |
| * try to compute the actual residue, based on how much data |
| * was really transferred and what the device tells us |
| */ |
| if (residue && !(us->fflags & US_FL_IGNORE_RESIDUE)) { |
| residue = min(residue, transfer_length); |
| if (us->srb) |
| scsi_set_resid(us->srb, max(scsi_get_resid(us->srb), |
| (int) residue)); |
| } |
| |
| if (bcs->Status != US_BULK_STAT_OK) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * ENE_Read_Data() |
| */ |
| int ENE_Read_Data(struct us_data *us, void *buf, unsigned int length) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; |
| int result; |
| |
| /* dev_dbg(&us->pusb_dev->dev, "transport --- ENE_Read_Data\n"); */ |
| /* set up the command wrapper */ |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = length; |
| bcb->Flags = 0x80; |
| bcb->CDB[0] = 0xED; |
| bcb->CDB[2] = 0xFF; |
| bcb->CDB[3] = 0x81; |
| |
| /* send cmd to out endpoint */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, |
| US_BULK_CB_WRAP_LEN, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* R/W data */ |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, |
| buf, length, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* Get CSW for device status */ |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, |
| US_BULK_CS_WRAP_LEN, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| if (bcs->Status != US_BULK_STAT_OK) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * ENE_Write_Data(): |
| */ |
| int ENE_Write_Data(struct us_data *us, void *buf, unsigned int length) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; |
| int result; |
| |
| /* printk("transport --- ENE_Write_Data\n"); */ |
| /* set up the command wrapper */ |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = length; |
| bcb->Flags = 0x00; |
| bcb->CDB[0] = 0xEE; |
| bcb->CDB[2] = 0xFF; |
| bcb->CDB[3] = 0x81; |
| |
| /* send cmd to out endpoint */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcb, |
| US_BULK_CB_WRAP_LEN, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* R/W data */ |
| result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, |
| buf, length, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| /* Get CSW for device status */ |
| result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, bcs, |
| US_BULK_CS_WRAP_LEN, NULL); |
| if (result != USB_STOR_XFER_GOOD) |
| return USB_STOR_TRANSPORT_ERROR; |
| if (bcs->Status != US_BULK_STAT_OK) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |