| #include <linux/fs.h> |
| |
| #include "headers.h" |
| /*************************************************************** |
| * Function - bcm_char_open() |
| * |
| * Description - This is the "open" entry point for the character |
| * driver. |
| * |
| * Parameters - inode: Pointer to the Inode structure of char device |
| * filp : File pointer of the char device |
| * |
| * Returns - Zero(Success) |
| ****************************************************************/ |
| |
| static int bcm_char_open(struct inode *inode, struct file *filp) |
| { |
| struct bcm_mini_adapter *Adapter = NULL; |
| struct bcm_tarang_data *pTarang = NULL; |
| |
| Adapter = GET_BCM_ADAPTER(gblpnetdev); |
| pTarang = kzalloc(sizeof(struct bcm_tarang_data), GFP_KERNEL); |
| if (!pTarang) |
| return -ENOMEM; |
| |
| pTarang->Adapter = Adapter; |
| pTarang->RxCntrlMsgBitMask = 0xFFFFFFFF & ~(1 << 0xB); |
| |
| down(&Adapter->RxAppControlQueuelock); |
| pTarang->next = Adapter->pTarangs; |
| Adapter->pTarangs = pTarang; |
| up(&Adapter->RxAppControlQueuelock); |
| |
| /* Store the Adapter structure */ |
| filp->private_data = pTarang; |
| |
| /* Start Queuing the control response Packets */ |
| atomic_inc(&Adapter->ApplicationRunning); |
| |
| nonseekable_open(inode, filp); |
| return 0; |
| } |
| |
| static int bcm_char_release(struct inode *inode, struct file *filp) |
| { |
| struct bcm_tarang_data *pTarang, *tmp, *ptmp; |
| struct bcm_mini_adapter *Adapter = NULL; |
| struct sk_buff *pkt, *npkt; |
| |
| pTarang = (struct bcm_tarang_data *)filp->private_data; |
| |
| if (pTarang == NULL) |
| return 0; |
| |
| Adapter = pTarang->Adapter; |
| |
| down(&Adapter->RxAppControlQueuelock); |
| |
| tmp = Adapter->pTarangs; |
| for (ptmp = NULL; tmp; ptmp = tmp, tmp = tmp->next) { |
| if (tmp == pTarang) |
| break; |
| } |
| |
| if (tmp) { |
| if (!ptmp) |
| Adapter->pTarangs = tmp->next; |
| else |
| ptmp->next = tmp->next; |
| } else { |
| up(&Adapter->RxAppControlQueuelock); |
| return 0; |
| } |
| |
| pkt = pTarang->RxAppControlHead; |
| while (pkt) { |
| npkt = pkt->next; |
| kfree_skb(pkt); |
| pkt = npkt; |
| } |
| |
| up(&Adapter->RxAppControlQueuelock); |
| |
| /* Stop Queuing the control response Packets */ |
| atomic_dec(&Adapter->ApplicationRunning); |
| |
| kfree(pTarang); |
| |
| /* remove this filp from the asynchronously notified filp's */ |
| filp->private_data = NULL; |
| return 0; |
| } |
| |
| static ssize_t bcm_char_read(struct file *filp, char __user *buf, size_t size, |
| loff_t *f_pos) |
| { |
| struct bcm_tarang_data *pTarang = filp->private_data; |
| struct bcm_mini_adapter *Adapter = pTarang->Adapter; |
| struct sk_buff *Packet = NULL; |
| ssize_t PktLen = 0; |
| int wait_ret_val = 0; |
| unsigned long ret = 0; |
| |
| wait_ret_val = wait_event_interruptible(Adapter->process_read_wait_queue, |
| (pTarang->RxAppControlHead || |
| Adapter->device_removed)); |
| if ((wait_ret_val == -ERESTARTSYS)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Exiting as i've been asked to exit!!!\n"); |
| return wait_ret_val; |
| } |
| |
| if (Adapter->device_removed) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device Removed... Killing the Apps...\n"); |
| return -ENODEV; |
| } |
| |
| if (false == Adapter->fw_download_done) |
| return -EACCES; |
| |
| down(&Adapter->RxAppControlQueuelock); |
| |
| if (pTarang->RxAppControlHead) { |
| Packet = pTarang->RxAppControlHead; |
| DEQUEUEPACKET(pTarang->RxAppControlHead, |
| pTarang->RxAppControlTail); |
| pTarang->AppCtrlQueueLen--; |
| } |
| |
| up(&Adapter->RxAppControlQueuelock); |
| |
| if (Packet) { |
| PktLen = Packet->len; |
| ret = copy_to_user(buf, Packet->data, |
| min_t(size_t, PktLen, size)); |
| if (ret) { |
| dev_kfree_skb(Packet); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Returning from copy to user failure\n"); |
| return -EFAULT; |
| } |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Read %zd Bytes From Adapter packet = %p by process %d!\n", |
| PktLen, Packet, current->pid); |
| dev_kfree_skb(Packet); |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "<\n"); |
| return PktLen; |
| } |
| |
| static int bcm_char_ioctl_reg_read_private(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_rdm_buffer sRdmBuffer = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| PCHAR temp_buff; |
| INT Status = STATUS_FAILURE; |
| UINT Bufflen; |
| u16 temp_value; |
| int bytes; |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(sRdmBuffer)) |
| return -EINVAL; |
| |
| if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength > USHRT_MAX || |
| IoBuffer.OutputLength == 0) { |
| return -EINVAL; |
| } |
| |
| Bufflen = IoBuffer.OutputLength; |
| temp_value = 4 - (Bufflen % 4); |
| Bufflen += temp_value % 4; |
| |
| temp_buff = kmalloc(Bufflen, GFP_KERNEL); |
| if (!temp_buff) |
| return -ENOMEM; |
| |
| bytes = rdmalt(Adapter, (UINT)sRdmBuffer.Register, |
| (PUINT)temp_buff, Bufflen); |
| if (bytes > 0) { |
| Status = STATUS_SUCCESS; |
| if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) { |
| kfree(temp_buff); |
| return -EFAULT; |
| } |
| } else { |
| Status = bytes; |
| } |
| |
| kfree(temp_buff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_reg_write_private(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_wrm_buffer sWrmBuffer = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| UINT uiTempVar = 0; |
| INT Status; |
| |
| /* Copy Ioctl Buffer structure */ |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(sWrmBuffer)) |
| return -EINVAL; |
| |
| /* Get WrmBuffer structure */ |
| if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK; |
| if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) && |
| ((uiTempVar == EEPROM_REJECT_REG_1) || |
| (uiTempVar == EEPROM_REJECT_REG_2) || |
| (uiTempVar == EEPROM_REJECT_REG_3) || |
| (uiTempVar == EEPROM_REJECT_REG_4))) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "EEPROM Access Denied, not in VSG Mode\n"); |
| return -EFAULT; |
| } |
| |
| Status = wrmalt(Adapter, (UINT)sWrmBuffer.Register, |
| (PUINT)sWrmBuffer.Data, sizeof(ULONG)); |
| |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "WRM Done\n"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "WRM Failed\n"); |
| Status = -EFAULT; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_eeprom_reg_read(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_rdm_buffer sRdmBuffer = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| PCHAR temp_buff = NULL; |
| UINT uiTempVar = 0; |
| INT Status; |
| int bytes; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Device in Idle Mode, Blocking Rdms\n"); |
| return -EACCES; |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(sRdmBuffer)) |
| return -EINVAL; |
| |
| if (copy_from_user(&sRdmBuffer, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength > USHRT_MAX || |
| IoBuffer.OutputLength == 0) { |
| return -EINVAL; |
| } |
| |
| temp_buff = kmalloc(IoBuffer.OutputLength, GFP_KERNEL); |
| if (!temp_buff) |
| return STATUS_FAILURE; |
| |
| if ((((ULONG)sRdmBuffer.Register & 0x0F000000) != 0x0F000000) || |
| ((ULONG)sRdmBuffer.Register & 0x3)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "RDM Done On invalid Address : %x Access Denied.\n", |
| (int)sRdmBuffer.Register); |
| |
| kfree(temp_buff); |
| return -EINVAL; |
| } |
| |
| uiTempVar = sRdmBuffer.Register & EEPROM_REJECT_MASK; |
| bytes = rdmaltWithLock(Adapter, (UINT)sRdmBuffer.Register, |
| (PUINT)temp_buff, IoBuffer.OutputLength); |
| |
| if (bytes > 0) { |
| Status = STATUS_SUCCESS; |
| if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, bytes)) { |
| kfree(temp_buff); |
| return -EFAULT; |
| } |
| } else { |
| Status = bytes; |
| } |
| |
| kfree(temp_buff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_eeprom_reg_write(void __user *argp, |
| struct bcm_mini_adapter *Adapter, UINT cmd) |
| { |
| struct bcm_wrm_buffer sWrmBuffer = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| UINT uiTempVar = 0; |
| INT Status; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Device in Idle Mode, Blocking Wrms\n"); |
| return -EACCES; |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(sWrmBuffer)) |
| return -EINVAL; |
| |
| /* Get WrmBuffer structure */ |
| if (copy_from_user(&sWrmBuffer, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| if ((((ULONG)sWrmBuffer.Register & 0x0F000000) != 0x0F000000) || |
| ((ULONG)sWrmBuffer.Register & 0x3)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "WRM Done On invalid Address : %x Access Denied.\n", |
| (int)sWrmBuffer.Register); |
| return -EINVAL; |
| } |
| |
| uiTempVar = sWrmBuffer.Register & EEPROM_REJECT_MASK; |
| if (!((Adapter->pstargetparams->m_u32Customize) & VSG_MODE) && |
| ((uiTempVar == EEPROM_REJECT_REG_1) || |
| (uiTempVar == EEPROM_REJECT_REG_2) || |
| (uiTempVar == EEPROM_REJECT_REG_3) || |
| (uiTempVar == EEPROM_REJECT_REG_4)) && |
| (cmd == IOCTL_BCM_REGISTER_WRITE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "EEPROM Access Denied, not in VSG Mode\n"); |
| return -EFAULT; |
| } |
| |
| Status = wrmaltWithLock(Adapter, (UINT)sWrmBuffer.Register, |
| (PUINT)sWrmBuffer.Data, |
| sWrmBuffer.Length); |
| |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, |
| DBG_LVL_ALL, "WRM Done\n"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "WRM Failed\n"); |
| Status = -EFAULT; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_gpio_set_request(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_gpio_info gpio_info = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| UCHAR ucResetValue[4]; |
| UINT value = 0; |
| UINT uiBit = 0; |
| UINT uiOperation = 0; |
| INT Status; |
| int bytes; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "GPIO Can't be set/clear in Low power Mode"); |
| return -EACCES; |
| } |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(gpio_info)) |
| return -EINVAL; |
| |
| if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| uiBit = gpio_info.uiGpioNumber; |
| uiOperation = gpio_info.uiGpioValue; |
| value = (1<<uiBit); |
| |
| if (IsReqGpioIsLedInNVM(Adapter, value) == false) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "Sorry, Requested GPIO<0x%X> is not correspond to LED !!!", |
| value); |
| return -EINVAL; |
| } |
| |
| /* Set - setting 1 */ |
| if (uiOperation) { |
| /* Set the gpio output register */ |
| Status = wrmaltWithLock(Adapter, |
| BCM_GPIO_OUTPUT_SET_REG, |
| (PUINT)(&value), sizeof(UINT)); |
| |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "Set the GPIO bit\n"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "Failed to set the %dth GPIO\n", |
| uiBit); |
| return Status; |
| } |
| } else { |
| /* Set the gpio output register */ |
| Status = wrmaltWithLock(Adapter, |
| BCM_GPIO_OUTPUT_CLR_REG, |
| (PUINT)(&value), sizeof(UINT)); |
| |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "Set the GPIO bit\n"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "Failed to clear the %dth GPIO\n", |
| uiBit); |
| return Status; |
| } |
| } |
| |
| bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, |
| (PUINT)ucResetValue, sizeof(UINT)); |
| if (bytes < 0) { |
| Status = bytes; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "GPIO_MODE_REGISTER read failed"); |
| return Status; |
| } else { |
| Status = STATUS_SUCCESS; |
| } |
| |
| /* Set the gpio mode register to output */ |
| *(UINT *)ucResetValue |= (1<<uiBit); |
| Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER, |
| (PUINT)ucResetValue, sizeof(UINT)); |
| |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "Set the GPIO to output Mode\n"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "Failed to put GPIO in Output Mode\n"); |
| } |
| |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_led_thread_state_change_req(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_user_thread_req threadReq = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "User made LED thread InActive"); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "GPIO Can't be set/clear in Low power Mode"); |
| return -EACCES; |
| } |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(threadReq)) |
| return -EINVAL; |
| |
| if (copy_from_user(&threadReq, IoBuffer.InputBuffer, IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| /* if LED thread is running(Actively or Inactively) |
| * set it state to make inactive |
| */ |
| if (Adapter->LEDInfo.led_thread_running) { |
| if (threadReq.ThreadState == LED_THREAD_ACTIVATION_REQ) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "Activating thread req"); |
| Adapter->DriverState = LED_THREAD_ACTIVE; |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "DeActivating Thread req....."); |
| Adapter->DriverState = LED_THREAD_INACTIVE; |
| } |
| |
| /* signal thread. */ |
| wake_up(&Adapter->LEDInfo.notify_led_event); |
| } |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_gpio_status_request(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_gpio_info gpio_info = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| ULONG uiBit = 0; |
| UCHAR ucRead[4]; |
| INT Status; |
| int bytes; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) |
| return -EACCES; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(gpio_info)) |
| return -EINVAL; |
| |
| if (copy_from_user(&gpio_info, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| uiBit = gpio_info.uiGpioNumber; |
| |
| /* Set the gpio output register */ |
| bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, |
| (PUINT)ucRead, sizeof(UINT)); |
| |
| if (bytes < 0) { |
| Status = bytes; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "RDM Failed\n"); |
| return Status; |
| } else { |
| Status = STATUS_SUCCESS; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_gpio_multi_request(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_gpio_multi_info gpio_multi_info[MAX_IDX]; |
| struct bcm_gpio_multi_info *pgpio_multi_info = |
| (struct bcm_gpio_multi_info *)gpio_multi_info; |
| struct bcm_ioctl_buffer IoBuffer; |
| UCHAR ucResetValue[4]; |
| INT Status = STATUS_FAILURE; |
| int bytes; |
| |
| memset(pgpio_multi_info, 0, MAX_IDX * sizeof(struct bcm_gpio_multi_info)); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) |
| return -EINVAL; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(gpio_multi_info)) |
| return -EINVAL; |
| if (IoBuffer.OutputLength > sizeof(gpio_multi_info)) |
| IoBuffer.OutputLength = sizeof(gpio_multi_info); |
| |
| if (copy_from_user(&gpio_multi_info, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| if (IsReqGpioIsLedInNVM(Adapter, |
| pgpio_multi_info[WIMAX_IDX].uiGPIOMask) == false) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, |
| "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!", |
| pgpio_multi_info[WIMAX_IDX].uiGPIOMask, |
| Adapter->gpioBitMap); |
| return -EINVAL; |
| } |
| |
| /* Set the gpio output register */ |
| if ((pgpio_multi_info[WIMAX_IDX].uiGPIOMask) & |
| (pgpio_multi_info[WIMAX_IDX].uiGPIOCommand)) { |
| /* Set 1's in GPIO OUTPUT REGISTER */ |
| *(UINT *)ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask & |
| pgpio_multi_info[WIMAX_IDX].uiGPIOCommand & |
| pgpio_multi_info[WIMAX_IDX].uiGPIOValue; |
| |
| if (*(UINT *) ucResetValue) |
| Status = wrmaltWithLock(Adapter, |
| BCM_GPIO_OUTPUT_SET_REG, |
| (PUINT)ucResetValue, sizeof(ULONG)); |
| |
| if (Status != STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "WRM to BCM_GPIO_OUTPUT_SET_REG Failed."); |
| return Status; |
| } |
| |
| /* Clear to 0's in GPIO OUTPUT REGISTER */ |
| *(UINT *)ucResetValue = (pgpio_multi_info[WIMAX_IDX].uiGPIOMask & |
| pgpio_multi_info[WIMAX_IDX].uiGPIOCommand & |
| (~(pgpio_multi_info[WIMAX_IDX].uiGPIOValue))); |
| |
| if (*(UINT *) ucResetValue) |
| Status = wrmaltWithLock(Adapter, |
| BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue, |
| sizeof(ULONG)); |
| |
| if (Status != STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "WRM to BCM_GPIO_OUTPUT_CLR_REG Failed."); |
| return Status; |
| } |
| } |
| |
| if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) { |
| bytes = rdmaltWithLock(Adapter, (UINT)GPIO_PIN_STATE_REGISTER, |
| (PUINT)ucResetValue, sizeof(UINT)); |
| |
| if (bytes < 0) { |
| Status = bytes; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "RDM to GPIO_PIN_STATE_REGISTER Failed."); |
| return Status; |
| } else { |
| Status = STATUS_SUCCESS; |
| } |
| |
| pgpio_multi_info[WIMAX_IDX].uiGPIOValue = (*(UINT *)ucResetValue & |
| pgpio_multi_info[WIMAX_IDX].uiGPIOMask); |
| } |
| |
| Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_info, |
| IoBuffer.OutputLength); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Failed while copying Content to IOBufer for user space err:%d", |
| Status); |
| return -EFAULT; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_gpio_mode_request(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_gpio_multi_mode gpio_multi_mode[MAX_IDX]; |
| struct bcm_gpio_multi_mode *pgpio_multi_mode = |
| (struct bcm_gpio_multi_mode *)gpio_multi_mode; |
| struct bcm_ioctl_buffer IoBuffer; |
| UCHAR ucResetValue[4]; |
| INT Status; |
| int bytes; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) |
| return -EINVAL; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength > sizeof(gpio_multi_mode)) |
| return -EINVAL; |
| if (IoBuffer.OutputLength > sizeof(gpio_multi_mode)) |
| IoBuffer.OutputLength = sizeof(gpio_multi_mode); |
| |
| if (copy_from_user(&gpio_multi_mode, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) |
| return -EFAULT; |
| |
| bytes = rdmaltWithLock(Adapter, (UINT)GPIO_MODE_REGISTER, |
| (PUINT)ucResetValue, sizeof(UINT)); |
| |
| if (bytes < 0) { |
| Status = bytes; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Read of GPIO_MODE_REGISTER failed"); |
| return Status; |
| } else { |
| Status = STATUS_SUCCESS; |
| } |
| |
| /* Validating the request */ |
| if (IsReqGpioIsLedInNVM(Adapter, |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) == false) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Sorry, Requested GPIO<0x%X> is not correspond to NVM LED bit map<0x%X>!!!", |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMask, |
| Adapter->gpioBitMap); |
| return -EINVAL; |
| } |
| |
| if (pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) { |
| /* write all OUT's (1's) */ |
| *(UINT *) ucResetValue |= (pgpio_multi_mode[WIMAX_IDX].uiGPIOMode & |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMask); |
| |
| /* write all IN's (0's) */ |
| *(UINT *) ucResetValue &= ~((~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) & |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMask); |
| |
| /* Currently implemented return the modes of all GPIO's |
| * else needs to bit AND with mask |
| */ |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue; |
| |
| Status = wrmaltWithLock(Adapter, GPIO_MODE_REGISTER, |
| (PUINT)ucResetValue, sizeof(ULONG)); |
| if (Status == STATUS_SUCCESS) { |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "WRM to GPIO_MODE_REGISTER Done"); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "WRM to GPIO_MODE_REGISTER Failed"); |
| return -EFAULT; |
| } |
| } else { |
| /* if uiGPIOMask is 0 then return mode register configuration */ |
| pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue; |
| } |
| |
| Status = copy_to_user(IoBuffer.OutputBuffer, &gpio_multi_mode, |
| IoBuffer.OutputLength); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Failed while copying Content to IOBufer for user space err:%d", |
| Status); |
| return -EFAULT; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_misc_request(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| PVOID pvBuffer = NULL; |
| INT Status; |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength < sizeof(struct bcm_link_request)) |
| return -EINVAL; |
| |
| if (IoBuffer.InputLength > MAX_CNTL_PKT_SIZE) |
| return -EINVAL; |
| |
| pvBuffer = memdup_user(IoBuffer.InputBuffer, |
| IoBuffer.InputLength); |
| if (IS_ERR(pvBuffer)) |
| return PTR_ERR(pvBuffer); |
| |
| down(&Adapter->LowPowerModeSync); |
| Status = wait_event_interruptible_timeout(Adapter->lowpower_mode_wait_queue, |
| !Adapter->bPreparingForLowPowerMode, |
| (1 * HZ)); |
| if (Status == -ERESTARTSYS) |
| goto cntrlEnd; |
| |
| if (Adapter->bPreparingForLowPowerMode) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Preparing Idle Mode is still True - Hence Rejecting control message\n"); |
| Status = STATUS_FAILURE; |
| goto cntrlEnd; |
| } |
| Status = CopyBufferToControlPacket(Adapter, (PVOID)pvBuffer); |
| |
| cntrlEnd: |
| up(&Adapter->LowPowerModeSync); |
| kfree(pvBuffer); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_buffer_download_start( |
| struct bcm_mini_adapter *Adapter) |
| { |
| INT Status; |
| |
| if (down_trylock(&Adapter->NVMRdmWrmLock)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n"); |
| return -EACCES; |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Starting the firmware download PID =0x%x!!!!\n", current->pid); |
| |
| if (down_trylock(&Adapter->fw_download_sema)) |
| return -EBUSY; |
| |
| Adapter->bBinDownloaded = false; |
| Adapter->fw_download_process_pid = current->pid; |
| Adapter->bCfgDownloaded = false; |
| Adapter->fw_download_done = false; |
| netif_carrier_off(Adapter->dev); |
| netif_stop_queue(Adapter->dev); |
| Status = reset_card_proc(Adapter); |
| if (Status) { |
| pr_err(PFX "%s: reset_card_proc Failed!\n", Adapter->dev->name); |
| up(&Adapter->fw_download_sema); |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } |
| mdelay(10); |
| |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_buffer_download(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_firmware_info *psFwInfo = NULL; |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Starting the firmware download PID =0x%x!!!!\n", current->pid); |
| |
| if (!down_trylock(&Adapter->fw_download_sema)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Invalid way to download buffer. Use Start and then call this!!!\n"); |
| up(&Adapter->fw_download_sema); |
| return -EINVAL; |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) { |
| up(&Adapter->fw_download_sema); |
| return -EFAULT; |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Length for FW DLD is : %lx\n", IoBuffer.InputLength); |
| |
| if (IoBuffer.InputLength > sizeof(struct bcm_firmware_info)) { |
| up(&Adapter->fw_download_sema); |
| return -EINVAL; |
| } |
| |
| psFwInfo = kmalloc(sizeof(*psFwInfo), GFP_KERNEL); |
| if (!psFwInfo) { |
| up(&Adapter->fw_download_sema); |
| return -ENOMEM; |
| } |
| |
| if (copy_from_user(psFwInfo, IoBuffer.InputBuffer, |
| IoBuffer.InputLength)) { |
| up(&Adapter->fw_download_sema); |
| kfree(psFwInfo); |
| return -EFAULT; |
| } |
| |
| if (!psFwInfo->pvMappedFirmwareAddress || |
| (psFwInfo->u32FirmwareLength == 0)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Something else is wrong %lu\n", |
| psFwInfo->u32FirmwareLength); |
| up(&Adapter->fw_download_sema); |
| kfree(psFwInfo); |
| Status = -EINVAL; |
| return Status; |
| } |
| |
| Status = bcm_ioctl_fw_download(Adapter, psFwInfo); |
| |
| if (Status != STATUS_SUCCESS) { |
| if (psFwInfo->u32StartingAddress == CONFIG_BEGIN_ADDR) |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "IOCTL: Configuration File Upload Failed\n"); |
| else |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "IOCTL: Firmware File Upload Failed\n"); |
| |
| /* up(&Adapter->fw_download_sema); */ |
| |
| if (Adapter->LEDInfo.led_thread_running & |
| BCM_LED_THREAD_RUNNING_ACTIVELY) { |
| Adapter->DriverState = DRIVER_INIT; |
| Adapter->LEDInfo.bLedInitDone = false; |
| wake_up(&Adapter->LEDInfo.notify_led_event); |
| } |
| } |
| |
| if (Status != STATUS_SUCCESS) |
| up(&Adapter->fw_download_sema); |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL: Firmware File Uploaded\n"); |
| kfree(psFwInfo); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_buffer_download_stop(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| INT Status; |
| int timeout = 0; |
| |
| if (!down_trylock(&Adapter->fw_download_sema)) { |
| up(&Adapter->fw_download_sema); |
| return -EINVAL; |
| } |
| |
| if (down_trylock(&Adapter->NVMRdmWrmLock)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "FW download blocked as EEPROM Read/Write is in progress\n"); |
| up(&Adapter->fw_download_sema); |
| return -EACCES; |
| } |
| |
| Adapter->bBinDownloaded = TRUE; |
| Adapter->bCfgDownloaded = TRUE; |
| atomic_set(&Adapter->CurrNumFreeTxDesc, 0); |
| Adapter->CurrNumRecvDescs = 0; |
| Adapter->downloadDDR = 0; |
| |
| /* setting the Mips to Run */ |
| Status = run_card_proc(Adapter); |
| |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Firm Download Failed\n"); |
| up(&Adapter->fw_download_sema); |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "Firm Download Over...\n"); |
| } |
| |
| mdelay(10); |
| |
| /* Wait for MailBox Interrupt */ |
| if (StartInterruptUrb((struct bcm_interface_adapter *)Adapter->pvInterfaceAdapter)) |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Unable to send interrupt...\n"); |
| |
| timeout = 5*HZ; |
| Adapter->waiting_to_fw_download_done = false; |
| wait_event_timeout(Adapter->ioctl_fw_dnld_wait_queue, |
| Adapter->waiting_to_fw_download_done, timeout); |
| Adapter->fw_download_process_pid = INVALID_PID; |
| Adapter->fw_download_done = TRUE; |
| atomic_set(&Adapter->CurrNumFreeTxDesc, 0); |
| Adapter->CurrNumRecvDescs = 0; |
| Adapter->PrevNumRecvDescs = 0; |
| atomic_set(&Adapter->cntrlpktCnt, 0); |
| Adapter->LinkUpStatus = 0; |
| Adapter->LinkStatus = 0; |
| |
| if (Adapter->LEDInfo.led_thread_running & |
| BCM_LED_THREAD_RUNNING_ACTIVELY) { |
| Adapter->DriverState = FW_DOWNLOAD_DONE; |
| wake_up(&Adapter->LEDInfo.notify_led_event); |
| } |
| |
| if (!timeout) |
| Status = -ENODEV; |
| |
| up(&Adapter->fw_download_sema); |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_chip_reset(struct bcm_mini_adapter *Adapter) |
| { |
| INT Status; |
| INT NVMAccess; |
| |
| NVMAccess = down_trylock(&Adapter->NVMRdmWrmLock); |
| if (NVMAccess) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| " IOCTL_BCM_CHIP_RESET not allowed as EEPROM Read/Write is in progress\n"); |
| return -EACCES; |
| } |
| |
| down(&Adapter->RxAppControlQueuelock); |
| Status = reset_card_proc(Adapter); |
| flushAllAppQ(); |
| up(&Adapter->RxAppControlQueuelock); |
| up(&Adapter->NVMRdmWrmLock); |
| ResetCounters(Adapter); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_qos_threshold(ULONG arg, |
| struct bcm_mini_adapter *Adapter) |
| { |
| USHORT uiLoopIndex; |
| |
| for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) { |
| if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold, |
| (unsigned long __user *)arg)) { |
| return -EFAULT; |
| } |
| } |
| return 0; |
| } |
| |
| static int bcm_char_ioctl_switch_transfer_mode(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| UINT uiData = 0; |
| |
| if (copy_from_user(&uiData, argp, sizeof(UINT))) |
| return -EFAULT; |
| |
| if (uiData) { |
| /* Allow All Packets */ |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_SWITCH_TRANSFER_MODE: ETH_PACKET_TUNNELING_MODE\n"); |
| Adapter->TransferMode = ETH_PACKET_TUNNELING_MODE; |
| } else { |
| /* Allow IP only Packets */ |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_SWITCH_TRANSFER_MODE: IP_PACKET_ONLY_MODE\n"); |
| Adapter->TransferMode = IP_PACKET_ONLY_MODE; |
| } |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_get_driver_version(void __user *argp) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| ulong len; |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| len = min_t(ulong, IoBuffer.OutputLength, strlen(DRV_VERSION) + 1); |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, DRV_VERSION, len)) |
| return -EFAULT; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_get_current_status(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_link_state link_state; |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "copy_from_user failed..\n"); |
| return -EFAULT; |
| } |
| |
| if (IoBuffer.OutputLength != sizeof(link_state)) |
| return -EINVAL; |
| |
| memset(&link_state, 0, sizeof(link_state)); |
| link_state.bIdleMode = Adapter->IdleMode; |
| link_state.bShutdownMode = Adapter->bShutStatus; |
| link_state.ucLinkStatus = Adapter->LinkStatus; |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, &link_state, min_t(size_t, |
| sizeof(link_state), IoBuffer.OutputLength))) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy_to_user Failed..\n"); |
| return -EFAULT; |
| } |
| return STATUS_SUCCESS; |
| } |
| |
| |
| static int bcm_char_ioctl_set_mac_tracing(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| UINT tracing_flag; |
| |
| /* copy ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (copy_from_user(&tracing_flag, IoBuffer.InputBuffer, sizeof(UINT))) |
| return -EFAULT; |
| |
| if (tracing_flag) |
| Adapter->pTarangs->MacTracingEnabled = TRUE; |
| else |
| Adapter->pTarangs->MacTracingEnabled = false; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_get_dsx_indication(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| ULONG ulSFId = 0; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength < sizeof(struct bcm_add_indication_alt)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Mismatch req: %lx needed is =0x%zx!!!", |
| IoBuffer.OutputLength, |
| sizeof(struct bcm_add_indication_alt)); |
| return -EINVAL; |
| } |
| |
| if (copy_from_user(&ulSFId, IoBuffer.InputBuffer, sizeof(ulSFId))) |
| return -EFAULT; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Get DSX Data SF ID is =%lx\n", ulSFId); |
| get_dsx_sf_data_to_application(Adapter, ulSFId, IoBuffer.OutputBuffer); |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_get_host_mibs(void __user *argp, |
| struct bcm_mini_adapter *Adapter, struct bcm_tarang_data *pTarang) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_FAILURE; |
| PVOID temp_buff; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength != sizeof(struct bcm_host_stats_mibs)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Length Check failed %lu %zd\n", IoBuffer.OutputLength, |
| sizeof(struct bcm_host_stats_mibs)); |
| return -EINVAL; |
| } |
| |
| /* FIXME: HOST_STATS are too big for kmalloc (122048)! */ |
| temp_buff = kzalloc(sizeof(struct bcm_host_stats_mibs), GFP_KERNEL); |
| if (!temp_buff) |
| return STATUS_FAILURE; |
| |
| Status = ProcessGetHostMibs(Adapter, temp_buff); |
| GetDroppedAppCntrlPktMibs(temp_buff, pTarang); |
| |
| if (Status != STATUS_FAILURE) { |
| if (copy_to_user(IoBuffer.OutputBuffer, temp_buff, |
| sizeof(struct bcm_host_stats_mibs))) { |
| kfree(temp_buff); |
| return -EFAULT; |
| } |
| } |
| |
| kfree(temp_buff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_bulk_wrm(void __user *argp, |
| struct bcm_mini_adapter *Adapter, UINT cmd) |
| { |
| struct bcm_bulk_wrm_buffer *pBulkBuffer; |
| struct bcm_ioctl_buffer IoBuffer; |
| UINT uiTempVar = 0; |
| INT Status = STATUS_FAILURE; |
| PCHAR pvBuffer = NULL; |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Device in Idle/Shutdown Mode, Blocking Wrms\n"); |
| return -EACCES; |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.InputLength < sizeof(ULONG) * 2) |
| return -EINVAL; |
| |
| pvBuffer = memdup_user(IoBuffer.InputBuffer, |
| IoBuffer.InputLength); |
| if (IS_ERR(pvBuffer)) |
| return PTR_ERR(pvBuffer); |
| |
| pBulkBuffer = (struct bcm_bulk_wrm_buffer *)pvBuffer; |
| |
| if (((ULONG)pBulkBuffer->Register & 0x0F000000) != 0x0F000000 || |
| ((ULONG)pBulkBuffer->Register & 0x3)) { |
| BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "WRM Done On invalid Address : %x Access Denied.\n", |
| (int)pBulkBuffer->Register); |
| kfree(pvBuffer); |
| return -EINVAL; |
| } |
| |
| uiTempVar = pBulkBuffer->Register & EEPROM_REJECT_MASK; |
| if (!((Adapter->pstargetparams->m_u32Customize)&VSG_MODE) && |
| ((uiTempVar == EEPROM_REJECT_REG_1) || |
| (uiTempVar == EEPROM_REJECT_REG_2) || |
| (uiTempVar == EEPROM_REJECT_REG_3) || |
| (uiTempVar == EEPROM_REJECT_REG_4)) && |
| (cmd == IOCTL_BCM_REGISTER_WRITE)) { |
| |
| kfree(pvBuffer); |
| BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "EEPROM Access Denied, not in VSG Mode\n"); |
| return -EFAULT; |
| } |
| |
| if (pBulkBuffer->SwapEndian == false) |
| Status = wrmWithLock(Adapter, (UINT)pBulkBuffer->Register, |
| (PCHAR)pBulkBuffer->Values, |
| IoBuffer.InputLength - 2*sizeof(ULONG)); |
| else |
| Status = wrmaltWithLock(Adapter, (UINT)pBulkBuffer->Register, |
| (PUINT)pBulkBuffer->Values, |
| IoBuffer.InputLength - 2*sizeof(ULONG)); |
| |
| if (Status != STATUS_SUCCESS) |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM Failed\n"); |
| |
| kfree(pvBuffer); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_get_nvm_size(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (Adapter->eNVMType == NVM_EEPROM || Adapter->eNVMType == NVM_FLASH) { |
| if (copy_to_user(IoBuffer.OutputBuffer, &Adapter->uiNVMDSDSize, |
| sizeof(UINT))) |
| return -EFAULT; |
| } |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_cal_init(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| UINT uiSectorSize = 0; |
| INT Status = STATUS_FAILURE; |
| |
| if (Adapter->eNVMType == NVM_FLASH) { |
| if (copy_from_user(&IoBuffer, argp, |
| sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (copy_from_user(&uiSectorSize, IoBuffer.InputBuffer, |
| sizeof(UINT))) |
| return -EFAULT; |
| |
| if ((uiSectorSize < MIN_SECTOR_SIZE) || |
| (uiSectorSize > MAX_SECTOR_SIZE)) { |
| if (copy_to_user(IoBuffer.OutputBuffer, |
| &Adapter->uiSectorSize, sizeof(UINT))) |
| return -EFAULT; |
| } else { |
| if (IsFlash2x(Adapter)) { |
| if (copy_to_user(IoBuffer.OutputBuffer, |
| &Adapter->uiSectorSize, sizeof(UINT))) |
| return -EFAULT; |
| } else { |
| if ((TRUE == Adapter->bShutStatus) || |
| (TRUE == Adapter->IdleMode)) { |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_PRINTK, 0, 0, |
| "Device is in Idle/Shutdown Mode\n"); |
| return -EACCES; |
| } |
| |
| Adapter->uiSectorSize = uiSectorSize; |
| BcmUpdateSectorSize(Adapter, |
| Adapter->uiSectorSize); |
| } |
| } |
| Status = STATUS_SUCCESS; |
| } else { |
| Status = STATUS_FAILURE; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_set_debug(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| #ifdef DEBUG |
| struct bcm_ioctl_buffer IoBuffer; |
| struct bcm_user_debug_state sUserDebugState; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "In SET_DEBUG ioctl\n"); |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (copy_from_user(&sUserDebugState, IoBuffer.InputBuffer, |
| sizeof(struct bcm_user_debug_state))) |
| return -EFAULT; |
| |
| BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "IOCTL_BCM_SET_DEBUG: OnOff=%d Type = 0x%x ", |
| sUserDebugState.OnOff, sUserDebugState.Type); |
| /* sUserDebugState.Subtype <<= 1; */ |
| sUserDebugState.Subtype = 1 << sUserDebugState.Subtype; |
| BCM_DEBUG_PRINT (Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "actual Subtype=0x%x\n", sUserDebugState.Subtype); |
| |
| /* Update new 'DebugState' in the Adapter */ |
| Adapter->stDebugState.type |= sUserDebugState.Type; |
| /* Subtype: A bitmap of 32 bits for Subtype per Type. |
| * Valid indexes in 'subtype' array: 1,2,4,8 |
| * corresponding to valid Type values. Hence we can use the 'Type' field |
| * as the index value, ignoring the array entries 0,3,5,6,7 ! |
| */ |
| if (sUserDebugState.OnOff) |
| Adapter->stDebugState.subtype[sUserDebugState.Type] |= |
| sUserDebugState.Subtype; |
| else |
| Adapter->stDebugState.subtype[sUserDebugState.Type] &= |
| ~sUserDebugState.Subtype; |
| |
| BCM_SHOW_DEBUG_BITMAP(Adapter); |
| #endif |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_nvm_rw(void __user *argp, |
| struct bcm_mini_adapter *Adapter, UINT cmd) |
| { |
| struct bcm_nvm_readwrite stNVMReadWrite; |
| struct timeval tv0, tv1; |
| struct bcm_ioctl_buffer IoBuffer; |
| PUCHAR pReadData = NULL; |
| ULONG ulDSDMagicNumInUsrBuff = 0; |
| INT Status = STATUS_FAILURE; |
| |
| memset(&tv0, 0, sizeof(struct timeval)); |
| memset(&tv1, 0, sizeof(struct timeval)); |
| if ((Adapter->eNVMType == NVM_FLASH) && |
| (Adapter->uiFlashLayoutMajorVersion == 0)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "The Flash Control Section is Corrupted. Hence Rejection on NVM Read/Write\n"); |
| return -EFAULT; |
| } |
| |
| if (IsFlash2x(Adapter)) { |
| if ((Adapter->eActiveDSD != DSD0) && |
| (Adapter->eActiveDSD != DSD1) && |
| (Adapter->eActiveDSD != DSD2)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "No DSD is active..hence NVM Command is blocked"); |
| return STATUS_FAILURE; |
| } |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (copy_from_user(&stNVMReadWrite, |
| (IOCTL_BCM_NVM_READ == cmd) ? |
| IoBuffer.OutputBuffer : IoBuffer.InputBuffer, |
| sizeof(struct bcm_nvm_readwrite))) |
| return -EFAULT; |
| |
| /* |
| * Deny the access if the offset crosses the cal area limit. |
| */ |
| if (stNVMReadWrite.uiNumBytes > Adapter->uiNVMDSDSize) |
| return STATUS_FAILURE; |
| |
| if (stNVMReadWrite.uiOffset > |
| Adapter->uiNVMDSDSize - stNVMReadWrite.uiNumBytes) |
| return STATUS_FAILURE; |
| |
| pReadData = memdup_user(stNVMReadWrite.pBuffer, |
| stNVMReadWrite.uiNumBytes); |
| if (IS_ERR(pReadData)) |
| return PTR_ERR(pReadData); |
| |
| do_gettimeofday(&tv0); |
| if (IOCTL_BCM_NVM_READ == cmd) { |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadData); |
| return -EACCES; |
| } |
| |
| Status = BeceemNVMRead(Adapter, (PUINT)pReadData, |
| stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes); |
| up(&Adapter->NVMRdmWrmLock); |
| |
| if (Status != STATUS_SUCCESS) { |
| kfree(pReadData); |
| return Status; |
| } |
| |
| if (copy_to_user(stNVMReadWrite.pBuffer, pReadData, |
| stNVMReadWrite.uiNumBytes)) { |
| kfree(pReadData); |
| return -EFAULT; |
| } |
| } else { |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadData); |
| return -EACCES; |
| } |
| |
| Adapter->bHeaderChangeAllowed = TRUE; |
| if (IsFlash2x(Adapter)) { |
| /* |
| * New Requirement:- |
| * DSD section updation will be allowed in two case:- |
| * 1. if DSD sig is present in DSD header means dongle |
| * is ok and updation is fruitfull |
| * 2. if point 1 failes then user buff should have |
| * DSD sig. this point ensures that if dongle is |
| * corrupted then user space program first modify |
| * the DSD header with valid DSD sig so that this |
| * as well as further write may be worthwhile. |
| * |
| * This restriction has been put assuming that |
| * if DSD sig is corrupted, DSD data won't be |
| * considered valid. |
| */ |
| |
| Status = BcmFlash2xCorruptSig(Adapter, |
| Adapter->eActiveDSD); |
| if (Status != STATUS_SUCCESS) { |
| if (((stNVMReadWrite.uiOffset + stNVMReadWrite.uiNumBytes) != |
| Adapter->uiNVMDSDSize) || |
| (stNVMReadWrite.uiNumBytes < SIGNATURE_SIZE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, |
| "DSD Sig is present neither in Flash nor User provided Input.."); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadData); |
| return Status; |
| } |
| |
| ulDSDMagicNumInUsrBuff = ntohl(*(PUINT)(pReadData + stNVMReadWrite.uiNumBytes - SIGNATURE_SIZE)); |
| if (ulDSDMagicNumInUsrBuff != |
| DSD_IMAGE_MAGIC_NUMBER) { |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "DSD Sig is present neither in Flash nor User provided Input.."); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadData); |
| return Status; |
| } |
| } |
| } |
| |
| Status = BeceemNVMWrite(Adapter, (PUINT)pReadData, |
| stNVMReadWrite.uiOffset, stNVMReadWrite.uiNumBytes, |
| stNVMReadWrite.bVerify); |
| if (IsFlash2x(Adapter)) |
| BcmFlash2xWriteSig(Adapter, Adapter->eActiveDSD); |
| |
| Adapter->bHeaderChangeAllowed = false; |
| |
| up(&Adapter->NVMRdmWrmLock); |
| |
| if (Status != STATUS_SUCCESS) { |
| kfree(pReadData); |
| return Status; |
| } |
| } |
| |
| do_gettimeofday(&tv1); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| " timetaken by Write/read :%ld msec\n", |
| (tv1.tv_sec - tv0.tv_sec)*1000 + (tv1.tv_usec - tv0.tv_usec)/1000); |
| |
| kfree(pReadData); |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_flash2x_section_read(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_flash2x_readwrite sFlash2xRead = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| PUCHAR pReadBuff = NULL; |
| UINT NOB = 0; |
| UINT BuffSize = 0; |
| UINT ReadBytes = 0; |
| UINT ReadOffset = 0; |
| INT Status = STATUS_FAILURE; |
| void __user *OutPutBuff; |
| |
| if (IsFlash2x(Adapter) != TRUE) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash Does not have 2.x map"); |
| return -EINVAL; |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "IOCTL_BCM_FLASH2X_SECTION_READ Called"); |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| /* Reading FLASH 2.x READ structure */ |
| if (copy_from_user(&sFlash2xRead, IoBuffer.InputBuffer, |
| sizeof(struct bcm_flash2x_readwrite))) |
| return -EFAULT; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.Section :%x", sFlash2xRead.Section); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.offset :%x", sFlash2xRead.offset); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.numOfBytes :%x", sFlash2xRead.numOfBytes); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.bVerify :%x\n", sFlash2xRead.bVerify); |
| |
| /* This was internal to driver for raw read. |
| * now it has ben exposed to user space app. |
| */ |
| if (validateFlash2xReadWrite(Adapter, &sFlash2xRead) == false) |
| return STATUS_FAILURE; |
| |
| NOB = sFlash2xRead.numOfBytes; |
| if (NOB > Adapter->uiSectorSize) |
| BuffSize = Adapter->uiSectorSize; |
| else |
| BuffSize = NOB; |
| |
| ReadOffset = sFlash2xRead.offset; |
| OutPutBuff = IoBuffer.OutputBuffer; |
| pReadBuff = (PCHAR)kzalloc(BuffSize , GFP_KERNEL); |
| |
| if (pReadBuff == NULL) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Memory allocation failed for Flash 2.x Read Structure"); |
| return -ENOMEM; |
| } |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadBuff); |
| return -EACCES; |
| } |
| |
| while (NOB) { |
| if (NOB > Adapter->uiSectorSize) |
| ReadBytes = Adapter->uiSectorSize; |
| else |
| ReadBytes = NOB; |
| |
| /* Reading the data from Flash 2.x */ |
| Status = BcmFlash2xBulkRead(Adapter, (PUINT)pReadBuff, |
| sFlash2xRead.Section, ReadOffset, ReadBytes); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Flash 2x read err with Status :%d", |
| Status); |
| break; |
| } |
| |
| BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, pReadBuff, ReadBytes); |
| |
| Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, |
| DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Copy to use failed with status :%d", Status); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadBuff); |
| return -EFAULT; |
| } |
| NOB = NOB - ReadBytes; |
| if (NOB) { |
| ReadOffset = ReadOffset + ReadBytes; |
| OutPutBuff = OutPutBuff + ReadBytes; |
| } |
| } |
| |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadBuff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_flash2x_section_write(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_flash2x_readwrite sFlash2xWrite = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| PUCHAR pWriteBuff; |
| void __user *InputAddr; |
| UINT NOB = 0; |
| UINT BuffSize = 0; |
| UINT WriteOffset = 0; |
| UINT WriteBytes = 0; |
| INT Status = STATUS_FAILURE; |
| |
| if (IsFlash2x(Adapter) != TRUE) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash Does not have 2.x map"); |
| return -EINVAL; |
| } |
| |
| /* First make this False so that we can enable the Sector |
| * Permission Check in BeceemFlashBulkWrite |
| */ |
| Adapter->bAllDSDWriteAllow = false; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_FLASH2X_SECTION_WRITE Called"); |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| /* Reading FLASH 2.x READ structure */ |
| if (copy_from_user(&sFlash2xWrite, IoBuffer.InputBuffer, |
| sizeof(struct bcm_flash2x_readwrite))) |
| return -EFAULT; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.Section :%x", sFlash2xWrite.Section); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.offset :%d", sFlash2xWrite.offset); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.numOfBytes :%x", sFlash2xWrite.numOfBytes); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\nsFlash2xRead.bVerify :%x\n", sFlash2xWrite.bVerify); |
| |
| if ((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) |
| && (sFlash2xWrite.Section != VSA2)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Only VSA write is allowed"); |
| return -EINVAL; |
| } |
| |
| if (validateFlash2xReadWrite(Adapter, &sFlash2xWrite) == false) |
| return STATUS_FAILURE; |
| |
| InputAddr = sFlash2xWrite.pDataBuff; |
| WriteOffset = sFlash2xWrite.offset; |
| NOB = sFlash2xWrite.numOfBytes; |
| |
| if (NOB > Adapter->uiSectorSize) |
| BuffSize = Adapter->uiSectorSize; |
| else |
| BuffSize = NOB; |
| |
| pWriteBuff = kmalloc(BuffSize, GFP_KERNEL); |
| |
| if (pWriteBuff == NULL) |
| return -ENOMEM; |
| |
| /* extracting the remainder of the given offset. */ |
| WriteBytes = Adapter->uiSectorSize; |
| if (WriteOffset % Adapter->uiSectorSize) |
| WriteBytes = Adapter->uiSectorSize - (WriteOffset % Adapter->uiSectorSize); |
| |
| if (NOB < WriteBytes) |
| WriteBytes = NOB; |
| |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pWriteBuff); |
| return -EACCES; |
| } |
| |
| BcmFlash2xCorruptSig(Adapter, sFlash2xWrite.Section); |
| do { |
| Status = copy_from_user(pWriteBuff, InputAddr, WriteBytes); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy to user failed with status :%d", Status); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pWriteBuff); |
| return -EFAULT; |
| } |
| BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, |
| OSAL_DBG, DBG_LVL_ALL, pWriteBuff, WriteBytes); |
| |
| /* Writing the data from Flash 2.x */ |
| Status = BcmFlash2xBulkWrite(Adapter, (PUINT)pWriteBuff, |
| sFlash2xWrite.Section, WriteOffset, WriteBytes, |
| sFlash2xWrite.bVerify); |
| |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash 2x read err with Status :%d", Status); |
| break; |
| } |
| |
| NOB = NOB - WriteBytes; |
| if (NOB) { |
| WriteOffset = WriteOffset + WriteBytes; |
| InputAddr = InputAddr + WriteBytes; |
| if (NOB > Adapter->uiSectorSize) |
| WriteBytes = Adapter->uiSectorSize; |
| else |
| WriteBytes = NOB; |
| } |
| } while (NOB > 0); |
| |
| BcmFlash2xWriteSig(Adapter, sFlash2xWrite.Section); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pWriteBuff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_flash2x_section_bitmap(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_flash2x_bitmap *psFlash2xBitMap; |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_FAILURE; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP Called"); |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength != sizeof(struct bcm_flash2x_bitmap)) |
| return -EINVAL; |
| |
| psFlash2xBitMap = kzalloc(sizeof(struct bcm_flash2x_bitmap), GFP_KERNEL); |
| if (psFlash2xBitMap == NULL) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Memory is not available"); |
| return -ENOMEM; |
| } |
| |
| /* Reading the Flash Sectio Bit map */ |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(psFlash2xBitMap); |
| return -EACCES; |
| } |
| |
| BcmGetFlash2xSectionalBitMap(Adapter, psFlash2xBitMap); |
| up(&Adapter->NVMRdmWrmLock); |
| if (copy_to_user(IoBuffer.OutputBuffer, psFlash2xBitMap, |
| sizeof(struct bcm_flash2x_bitmap))) { |
| kfree(psFlash2xBitMap); |
| return -EFAULT; |
| } |
| |
| kfree(psFlash2xBitMap); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_set_active_section(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| enum bcm_flash2x_section_val eFlash2xSectionVal = 0; |
| INT Status = STATUS_FAILURE; |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_SET_ACTIVE_SECTION Called"); |
| |
| if (IsFlash2x(Adapter) != TRUE) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash Does not have 2.x map"); |
| return -EINVAL; |
| } |
| |
| Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of IOCTL BUFFER failed"); |
| return -EFAULT; |
| } |
| |
| Status = copy_from_user(&eFlash2xSectionVal, |
| IoBuffer.InputBuffer, sizeof(INT)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of flash section val failed"); |
| return -EFAULT; |
| } |
| |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| return -EACCES; |
| } |
| |
| Status = BcmSetActiveSection(Adapter, eFlash2xSectionVal); |
| if (Status) |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Failed to make it's priority Highest. Status %d", |
| Status); |
| |
| up(&Adapter->NVMRdmWrmLock); |
| |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_copy_section(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_flash2x_copy_section sCopySectStrut = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_SUCCESS; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_COPY_SECTION Called"); |
| |
| Adapter->bAllDSDWriteAllow = false; |
| if (IsFlash2x(Adapter) != TRUE) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash Does not have 2.x map"); |
| return -EINVAL; |
| } |
| |
| Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of IOCTL BUFFER failed Status :%d", Status); |
| return -EFAULT; |
| } |
| |
| Status = copy_from_user(&sCopySectStrut, IoBuffer.InputBuffer, |
| sizeof(struct bcm_flash2x_copy_section)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of Copy_Section_Struct failed with Status :%d", |
| Status); |
| return -EFAULT; |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Source SEction :%x", sCopySectStrut.SrcSection); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Destination SEction :%x", sCopySectStrut.DstSection); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "offset :%x", sCopySectStrut.offset); |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "NOB :%x", sCopySectStrut.numOfBytes); |
| |
| if (IsSectionExistInFlash(Adapter, sCopySectStrut.SrcSection) == false) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Source Section<%x> does not exist in Flash ", |
| sCopySectStrut.SrcSection); |
| return -EINVAL; |
| } |
| |
| if (IsSectionExistInFlash(Adapter, sCopySectStrut.DstSection) == false) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Destinatio Section<%x> does not exist in Flash ", |
| sCopySectStrut.DstSection); |
| return -EINVAL; |
| } |
| |
| if (sCopySectStrut.SrcSection == sCopySectStrut.DstSection) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Source and Destination section should be different"); |
| return -EINVAL; |
| } |
| |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Device is in Idle/Shutdown Mode\n"); |
| up(&Adapter->NVMRdmWrmLock); |
| return -EACCES; |
| } |
| |
| if (sCopySectStrut.SrcSection == ISO_IMAGE1 || |
| sCopySectStrut.SrcSection == ISO_IMAGE2) { |
| if (IsNonCDLessDevice(Adapter)) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Device is Non-CDLess hence won't have ISO !!"); |
| Status = -EINVAL; |
| } else if (sCopySectStrut.numOfBytes == 0) { |
| Status = BcmCopyISO(Adapter, sCopySectStrut); |
| } else { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Partial Copy of ISO section is not Allowed.."); |
| Status = STATUS_FAILURE; |
| } |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } |
| |
| Status = BcmCopySection(Adapter, sCopySectStrut.SrcSection, |
| sCopySectStrut.DstSection, |
| sCopySectStrut.offset, |
| sCopySectStrut.numOfBytes); |
| up(&Adapter->NVMRdmWrmLock); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_get_flash_cs_info(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_SUCCESS; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| " IOCTL_BCM_GET_FLASH_CS_INFO Called"); |
| |
| Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of IOCTL BUFFER failed"); |
| return -EFAULT; |
| } |
| |
| if (Adapter->eNVMType != NVM_FLASH) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Connected device does not have flash"); |
| return -EINVAL; |
| } |
| |
| if (IsFlash2x(Adapter) == TRUE) { |
| if (IoBuffer.OutputLength < sizeof(struct bcm_flash2x_cs_info)) |
| return -EINVAL; |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, |
| Adapter->psFlash2xCSInfo, |
| sizeof(struct bcm_flash2x_cs_info))) |
| return -EFAULT; |
| } else { |
| if (IoBuffer.OutputLength < sizeof(struct bcm_flash_cs_info)) |
| return -EINVAL; |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, Adapter->psFlashCSInfo, |
| sizeof(struct bcm_flash_cs_info))) |
| return -EFAULT; |
| } |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_select_dsd(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_FAILURE; |
| UINT SectOfset = 0; |
| enum bcm_flash2x_section_val eFlash2xSectionVal; |
| |
| eFlash2xSectionVal = NO_SECTION_VAL; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_SELECT_DSD Called"); |
| |
| if (IsFlash2x(Adapter) != TRUE) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash Does not have 2.x map"); |
| return -EINVAL; |
| } |
| |
| Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of IOCTL BUFFER failed"); |
| return -EFAULT; |
| } |
| Status = copy_from_user(&eFlash2xSectionVal, IoBuffer.InputBuffer, |
| sizeof(INT)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy of flash section val failed"); |
| return -EFAULT; |
| } |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Read Section :%d", eFlash2xSectionVal); |
| if ((eFlash2xSectionVal != DSD0) && |
| (eFlash2xSectionVal != DSD1) && |
| (eFlash2xSectionVal != DSD2)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Passed section<%x> is not DSD section", |
| eFlash2xSectionVal); |
| return STATUS_FAILURE; |
| } |
| |
| SectOfset = BcmGetSectionValStartOffset(Adapter, eFlash2xSectionVal); |
| if (SectOfset == INVALID_OFFSET) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Provided Section val <%d> does not exist in Flash 2.x", |
| eFlash2xSectionVal); |
| return -EINVAL; |
| } |
| |
| Adapter->bAllDSDWriteAllow = TRUE; |
| Adapter->ulFlashCalStart = SectOfset; |
| Adapter->eActiveDSD = eFlash2xSectionVal; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_nvm_raw_read(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_nvm_readwrite stNVMRead; |
| struct bcm_ioctl_buffer IoBuffer; |
| unsigned int NOB; |
| INT BuffSize; |
| INT ReadOffset = 0; |
| UINT ReadBytes = 0; |
| PUCHAR pReadBuff; |
| void __user *OutPutBuff; |
| INT Status = STATUS_FAILURE; |
| |
| if (Adapter->eNVMType != NVM_FLASH) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "NVM TYPE is not Flash"); |
| return -EINVAL; |
| } |
| |
| /* Copy Ioctl Buffer structure */ |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "copy_from_user 1 failed\n"); |
| return -EFAULT; |
| } |
| |
| if (copy_from_user(&stNVMRead, IoBuffer.OutputBuffer, |
| sizeof(struct bcm_nvm_readwrite))) |
| return -EFAULT; |
| |
| NOB = stNVMRead.uiNumBytes; |
| /* In Raw-Read max Buff size : 64MB */ |
| |
| if (NOB > DEFAULT_BUFF_SIZE) |
| BuffSize = DEFAULT_BUFF_SIZE; |
| else |
| BuffSize = NOB; |
| |
| ReadOffset = stNVMRead.uiOffset; |
| OutPutBuff = stNVMRead.pBuffer; |
| |
| pReadBuff = kzalloc(BuffSize , GFP_KERNEL); |
| if (pReadBuff == NULL) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Memory allocation failed for Flash 2.x Read Structure"); |
| return -ENOMEM; |
| } |
| down(&Adapter->NVMRdmWrmLock); |
| |
| if ((Adapter->IdleMode == TRUE) || |
| (Adapter->bShutStatus == TRUE) || |
| (Adapter->bPreparingForLowPowerMode == TRUE)) { |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "Device is in Idle/Shutdown Mode\n"); |
| kfree(pReadBuff); |
| up(&Adapter->NVMRdmWrmLock); |
| return -EACCES; |
| } |
| |
| Adapter->bFlashRawRead = TRUE; |
| |
| while (NOB) { |
| if (NOB > DEFAULT_BUFF_SIZE) |
| ReadBytes = DEFAULT_BUFF_SIZE; |
| else |
| ReadBytes = NOB; |
| |
| /* Reading the data from Flash 2.x */ |
| Status = BeceemNVMRead(Adapter, (PUINT)pReadBuff, |
| ReadOffset, ReadBytes); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Flash 2x read err with Status :%d", Status); |
| break; |
| } |
| |
| BCM_DEBUG_PRINT_BUFFER(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, pReadBuff, ReadBytes); |
| |
| Status = copy_to_user(OutPutBuff, pReadBuff, ReadBytes); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, |
| "Copy to use failed with status :%d", Status); |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadBuff); |
| return -EFAULT; |
| } |
| NOB = NOB - ReadBytes; |
| if (NOB) { |
| ReadOffset = ReadOffset + ReadBytes; |
| OutPutBuff = OutPutBuff + ReadBytes; |
| } |
| } |
| Adapter->bFlashRawRead = false; |
| up(&Adapter->NVMRdmWrmLock); |
| kfree(pReadBuff); |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_cntrlmsg_mask(void __user *argp, |
| struct bcm_mini_adapter *Adapter, struct bcm_tarang_data *pTarang) |
| { |
| struct bcm_ioctl_buffer IoBuffer; |
| INT Status = STATUS_FAILURE; |
| ULONG RxCntrlMsgBitMask = 0; |
| |
| /* Copy Ioctl Buffer structure */ |
| Status = copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer)); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "copy of Ioctl buffer is failed from user space"); |
| return -EFAULT; |
| } |
| |
| if (IoBuffer.InputLength != sizeof(unsigned long)) |
| return -EINVAL; |
| |
| Status = copy_from_user(&RxCntrlMsgBitMask, |
| IoBuffer.InputBuffer, IoBuffer.InputLength); |
| if (Status) { |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "copy of control bit mask failed from user space"); |
| return -EFAULT; |
| } |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "\n Got user defined cntrl msg bit mask :%lx", |
| RxCntrlMsgBitMask); |
| pTarang->RxCntrlMsgBitMask = RxCntrlMsgBitMask; |
| |
| return Status; |
| } |
| |
| static int bcm_char_ioctl_get_device_driver_info(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_driver_info DevInfo; |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n"); |
| |
| memset(&DevInfo, 0, sizeof(DevInfo)); |
| DevInfo.MaxRDMBufferSize = BUFFER_4K; |
| DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START; |
| DevInfo.u32RxAlignmentCorrection = 0; |
| DevInfo.u32NVMType = Adapter->eNVMType; |
| DevInfo.u32InterfaceType = BCM_USB; |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength < sizeof(DevInfo)) |
| return -EINVAL; |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, &DevInfo, sizeof(DevInfo))) |
| return -EFAULT; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| static int bcm_char_ioctl_time_since_net_entry(void __user *argp, |
| struct bcm_mini_adapter *Adapter) |
| { |
| struct bcm_time_elapsed stTimeElapsedSinceNetEntry = {0}; |
| struct bcm_ioctl_buffer IoBuffer; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_TIME_SINCE_NET_ENTRY called"); |
| |
| if (copy_from_user(&IoBuffer, argp, sizeof(struct bcm_ioctl_buffer))) |
| return -EFAULT; |
| |
| if (IoBuffer.OutputLength < sizeof(struct bcm_time_elapsed)) |
| return -EINVAL; |
| |
| stTimeElapsedSinceNetEntry.ul64TimeElapsedSinceNetEntry = |
| get_seconds() - Adapter->liTimeSinceLastNetEntry; |
| |
| if (copy_to_user(IoBuffer.OutputBuffer, &stTimeElapsedSinceNetEntry, |
| sizeof(struct bcm_time_elapsed))) |
| return -EFAULT; |
| |
| return STATUS_SUCCESS; |
| } |
| |
| |
| static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg) |
| { |
| struct bcm_tarang_data *pTarang = filp->private_data; |
| void __user *argp = (void __user *)arg; |
| struct bcm_mini_adapter *Adapter = pTarang->Adapter; |
| INT Status = STATUS_FAILURE; |
| |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "Parameters Passed to control IOCTL cmd=0x%X arg=0x%lX", |
| cmd, arg); |
| |
| if (_IOC_TYPE(cmd) != BCM_IOCTL) |
| return -EFAULT; |
| if (_IOC_DIR(cmd) & _IOC_READ) |
| Status = !access_ok(VERIFY_WRITE, argp, _IOC_SIZE(cmd)); |
| else if (_IOC_DIR(cmd) & _IOC_WRITE) |
| Status = !access_ok(VERIFY_READ, argp, _IOC_SIZE(cmd)); |
| else if (_IOC_NONE == (_IOC_DIR(cmd) & _IOC_NONE)) |
| Status = STATUS_SUCCESS; |
| |
| if (Status) |
| return -EFAULT; |
| |
| if (Adapter->device_removed) |
| return -EFAULT; |
| |
| if (false == Adapter->fw_download_done) { |
| switch (cmd) { |
| case IOCTL_MAC_ADDR_REQ: |
| case IOCTL_LINK_REQ: |
| case IOCTL_CM_REQUEST: |
| case IOCTL_SS_INFO_REQ: |
| case IOCTL_SEND_CONTROL_MESSAGE: |
| case IOCTL_IDLE_REQ: |
| case IOCTL_BCM_GPIO_SET_REQUEST: |
| case IOCTL_BCM_GPIO_STATUS_REQUEST: |
| return -EACCES; |
| default: |
| break; |
| } |
| } |
| |
| Status = vendorextnIoctl(Adapter, cmd, arg); |
| if (Status != CONTINUE_COMMON_PATH) |
| return Status; |
| |
| switch (cmd) { |
| /* Rdms for Swin Idle... */ |
| case IOCTL_BCM_REGISTER_READ_PRIVATE: |
| Status = bcm_char_ioctl_reg_read_private(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_REGISTER_WRITE_PRIVATE: |
| Status = bcm_char_ioctl_reg_write_private(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_REGISTER_READ: |
| case IOCTL_BCM_EEPROM_REGISTER_READ: |
| Status = bcm_char_ioctl_eeprom_reg_read(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_REGISTER_WRITE: |
| case IOCTL_BCM_EEPROM_REGISTER_WRITE: |
| Status = bcm_char_ioctl_eeprom_reg_write(argp, Adapter, cmd); |
| return Status; |
| |
| case IOCTL_BCM_GPIO_SET_REQUEST: |
| Status = bcm_char_ioctl_gpio_set_request(argp, Adapter); |
| return Status; |
| |
| case BCM_LED_THREAD_STATE_CHANGE_REQ: |
| Status = bcm_char_ioctl_led_thread_state_change_req(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GPIO_STATUS_REQUEST: |
| Status = bcm_char_ioctl_gpio_status_request(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GPIO_MULTI_REQUEST: |
| Status = bcm_char_ioctl_gpio_multi_request(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GPIO_MODE_REQUEST: |
| Status = bcm_char_ioctl_gpio_mode_request(argp, Adapter); |
| return Status; |
| |
| case IOCTL_MAC_ADDR_REQ: |
| case IOCTL_LINK_REQ: |
| case IOCTL_CM_REQUEST: |
| case IOCTL_SS_INFO_REQ: |
| case IOCTL_SEND_CONTROL_MESSAGE: |
| case IOCTL_IDLE_REQ: |
| Status = bcm_char_ioctl_misc_request(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_BUFFER_DOWNLOAD_START: |
| Status = bcm_char_ioctl_buffer_download_start(Adapter); |
| return Status; |
| |
| case IOCTL_BCM_BUFFER_DOWNLOAD: |
| Status = bcm_char_ioctl_buffer_download(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_BUFFER_DOWNLOAD_STOP: |
| Status = bcm_char_ioctl_buffer_download_stop(argp, Adapter); |
| return Status; |
| |
| |
| case IOCTL_BE_BUCKET_SIZE: |
| Status = 0; |
| if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg)) |
| Status = -EFAULT; |
| break; |
| |
| case IOCTL_RTPS_BUCKET_SIZE: |
| Status = 0; |
| if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg)) |
| Status = -EFAULT; |
| break; |
| |
| case IOCTL_CHIP_RESET: |
| Status = bcm_char_ioctl_chip_reset(Adapter); |
| return Status; |
| |
| case IOCTL_QOS_THRESHOLD: |
| Status = bcm_char_ioctl_qos_threshold(arg, Adapter); |
| return Status; |
| |
| case IOCTL_DUMP_PACKET_INFO: |
| DumpPackInfo(Adapter); |
| DumpPhsRules(&Adapter->stBCMPhsContext); |
| Status = STATUS_SUCCESS; |
| break; |
| |
| case IOCTL_GET_PACK_INFO: |
| if (copy_to_user(argp, &Adapter->PackInfo, |
| sizeof(struct bcm_packet_info)*NO_OF_QUEUES)) |
| return -EFAULT; |
| Status = STATUS_SUCCESS; |
| break; |
| |
| case IOCTL_BCM_SWITCH_TRANSFER_MODE: |
| Status = bcm_char_ioctl_switch_transfer_mode(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GET_DRIVER_VERSION: |
| Status = bcm_char_ioctl_get_driver_version(argp); |
| return Status; |
| |
| case IOCTL_BCM_GET_CURRENT_STATUS: |
| Status = bcm_char_ioctl_get_current_status(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_SET_MAC_TRACING: |
| Status = bcm_char_ioctl_set_mac_tracing(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GET_DSX_INDICATION: |
| Status = bcm_char_ioctl_get_dsx_indication(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GET_HOST_MIBS: |
| Status = bcm_char_ioctl_get_host_mibs(argp, Adapter, pTarang); |
| return Status; |
| |
| case IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE: |
| if ((false == Adapter->bTriedToWakeUpFromlowPowerMode) && |
| (TRUE == Adapter->IdleMode)) { |
| Adapter->usIdleModePattern = ABORT_IDLE_MODE; |
| Adapter->bWakeUpDevice = TRUE; |
| wake_up(&Adapter->process_rx_cntrlpkt); |
| } |
| |
| Status = STATUS_SUCCESS; |
| break; |
| |
| case IOCTL_BCM_BULK_WRM: |
| Status = bcm_char_ioctl_bulk_wrm(argp, Adapter, cmd); |
| return Status; |
| |
| case IOCTL_BCM_GET_NVM_SIZE: |
| Status = bcm_char_ioctl_get_nvm_size(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_CAL_INIT: |
| Status = bcm_char_ioctl_cal_init(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_SET_DEBUG: |
| Status = bcm_char_ioctl_set_debug(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_NVM_READ: |
| case IOCTL_BCM_NVM_WRITE: |
| Status = bcm_char_ioctl_nvm_rw(argp, Adapter, cmd); |
| return Status; |
| |
| case IOCTL_BCM_FLASH2X_SECTION_READ: |
| Status = bcm_char_ioctl_flash2x_section_read(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_FLASH2X_SECTION_WRITE: |
| Status = bcm_char_ioctl_flash2x_section_write(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP: |
| Status = bcm_char_ioctl_flash2x_section_bitmap(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_SET_ACTIVE_SECTION: |
| Status = bcm_char_ioctl_set_active_section(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_IDENTIFY_ACTIVE_SECTION: |
| /* Right Now we are taking care of only DSD */ |
| Adapter->bAllDSDWriteAllow = false; |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, |
| "IOCTL_BCM_IDENTIFY_ACTIVE_SECTION called"); |
| Status = STATUS_SUCCESS; |
| break; |
| |
| case IOCTL_BCM_COPY_SECTION: |
| Status = bcm_char_ioctl_copy_section(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_GET_FLASH_CS_INFO: |
| Status = bcm_char_ioctl_get_flash_cs_info(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_SELECT_DSD: |
| Status = bcm_char_ioctl_select_dsd(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_NVM_RAW_READ: |
| Status = bcm_char_ioctl_nvm_raw_read(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_CNTRLMSG_MASK: |
| Status = bcm_char_ioctl_cntrlmsg_mask(argp, Adapter, pTarang); |
| return Status; |
| |
| case IOCTL_BCM_GET_DEVICE_DRIVER_INFO: |
| Status = bcm_char_ioctl_get_device_driver_info(argp, Adapter); |
| return Status; |
| |
| case IOCTL_BCM_TIME_SINCE_NET_ENTRY: |
| Status = bcm_char_ioctl_time_since_net_entry(argp, Adapter); |
| return Status; |
| |
| case IOCTL_CLOSE_NOTIFICATION: |
| BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, |
| DBG_LVL_ALL, "IOCTL_CLOSE_NOTIFICATION"); |
| break; |
| |
| default: |
| pr_info(DRV_NAME ": unknown ioctl cmd=%#x\n", cmd); |
| Status = STATUS_FAILURE; |
| break; |
| } |
| return Status; |
| } |
| |
| |
| static const struct file_operations bcm_fops = { |
| .owner = THIS_MODULE, |
| .open = bcm_char_open, |
| .release = bcm_char_release, |
| .read = bcm_char_read, |
| .unlocked_ioctl = bcm_char_ioctl, |
| .llseek = no_llseek, |
| }; |
| |
| int register_control_device_interface(struct bcm_mini_adapter *Adapter) |
| { |
| |
| if (Adapter->major > 0) |
| return Adapter->major; |
| |
| Adapter->major = register_chrdev(0, DEV_NAME, &bcm_fops); |
| if (Adapter->major < 0) { |
| pr_err(DRV_NAME ": could not created character device\n"); |
| return Adapter->major; |
| } |
| |
| Adapter->pstCreatedClassDevice = device_create(bcm_class, NULL, |
| MKDEV(Adapter->major, 0), |
| Adapter, DEV_NAME); |
| |
| if (IS_ERR(Adapter->pstCreatedClassDevice)) { |
| pr_err(DRV_NAME ": class device create failed\n"); |
| unregister_chrdev(Adapter->major, DEV_NAME); |
| return PTR_ERR(Adapter->pstCreatedClassDevice); |
| } |
| |
| return 0; |
| } |
| |
| void unregister_control_device_interface(struct bcm_mini_adapter *Adapter) |
| { |
| if (Adapter->major > 0) { |
| device_destroy(bcm_class, MKDEV(Adapter->major, 0)); |
| unregister_chrdev(Adapter->major, DEV_NAME); |
| } |
| } |
| |