drivers/staging/bcm/Ioctl.h - linux - Git at Google

 #ifndef _IOCTL_H_
 #define _IOCTL_H_

 struct bcm_rdm_buffer {
 	unsigned long Register;
 	unsigned long Length;
 } __packed;

 struct bcm_wrm_buffer {
 	unsigned long Register;
 	unsigned long Length;
 	unsigned char Data[4];
 } __packed;

 struct bcm_ioctl_buffer {
 	void __user *InputBuffer;
 	unsigned long InputLength;
 	void __user *OutputBuffer;
 	unsigned long OutputLength;
 } __packed;

 struct bcm_gpio_info {
 	unsigned int uiGpioNumber; /* valid numbers 0-15 */
 	unsigned int uiGpioValue; /* 1 set ; 0 not  set */
 } __packed;

 struct bcm_user_thread_req {
 	/* 0->Inactivate LED thread. */
 	/* 1->Activate the LED thread */
 	unsigned int ThreadState;
 } __packed;

 #define LED_THREAD_ACTIVATION_REQ  1
 #define BCM_IOCTL				'k'
 #define IOCTL_SEND_CONTROL_MESSAGE		_IOW(BCM_IOCTL,	0x801, int)
 #define IOCTL_BCM_REGISTER_WRITE		_IOW(BCM_IOCTL, 0x802, int)
 #define IOCTL_BCM_REGISTER_READ			_IOR(BCM_IOCTL, 0x803, int)
 #define IOCTL_BCM_COMMON_MEMORY_WRITE		_IOW(BCM_IOCTL, 0x804, int)
 #define IOCTL_BCM_COMMON_MEMORY_READ		_IOR(BCM_IOCTL, 0x805, int)
 #define IOCTL_GET_CONTROL_MESSAGE		_IOR(BCM_IOCTL,	0x806, int)
 #define IOCTL_BCM_FIRMWARE_DOWNLOAD		_IOW(BCM_IOCTL, 0x807, int)
 #define IOCTL_BCM_SET_SEND_VCID			_IOW(BCM_IOCTL,	0x808, int)
 #define IOCTL_BCM_SWITCH_TRANSFER_MODE		_IOW(BCM_IOCTL, 0x809, int)
 #define IOCTL_LINK_REQ				_IOW(BCM_IOCTL, 0x80A, int)
 #define IOCTL_RSSI_LEVEL_REQ			_IOW(BCM_IOCTL, 0x80B, int)
 #define IOCTL_IDLE_REQ				_IOW(BCM_IOCTL, 0x80C, int)
 #define IOCTL_SS_INFO_REQ			_IOW(BCM_IOCTL, 0x80D, int)
 #define IOCTL_GET_STATISTICS_POINTER		_IOW(BCM_IOCTL, 0x80E, int)
 #define IOCTL_CM_REQUEST			_IOW(BCM_IOCTL, 0x80F, int)
 #define IOCTL_INIT_PARAM_REQ			_IOW(BCM_IOCTL, 0x810, int)
 #define IOCTL_MAC_ADDR_REQ			_IOW(BCM_IOCTL, 0x811, int)
 #define IOCTL_MAC_ADDR_RESP			_IOWR(BCM_IOCTL, 0x812, int)
 #define IOCTL_CLASSIFICATION_RULE		_IOW(BCM_IOCTL, 0x813, char)
 #define IOCTL_CLOSE_NOTIFICATION		_IO(BCM_IOCTL, 0x814)
 #define IOCTL_LINK_UP				_IO(BCM_IOCTL, 0x815)
 #define IOCTL_LINK_DOWN				_IO(BCM_IOCTL, 0x816, struct bcm_ioctl_buffer)
 #define IOCTL_CHIP_RESET			_IO(BCM_IOCTL, 0x816)
 #define IOCTL_CINR_LEVEL_REQ			_IOW(BCM_IOCTL, 0x817, char)
 #define IOCTL_WTM_CONTROL_REQ			_IOW(BCM_IOCTL, 0x817, char)
 #define IOCTL_BE_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x818, unsigned long)
 #define IOCTL_RTPS_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x819, unsigned long)
 #define IOCTL_QOS_THRESHOLD			_IOW(BCM_IOCTL, 0x820, unsigned long)
 #define IOCTL_DUMP_PACKET_INFO			_IO(BCM_IOCTL, 0x821)
 #define IOCTL_GET_PACK_INFO			_IOR(BCM_IOCTL, 0x823, int)
 #define IOCTL_BCM_GET_DRIVER_VERSION		_IOR(BCM_IOCTL, 0x829, int)
 #define IOCTL_BCM_GET_CURRENT_STATUS		_IOW(BCM_IOCTL, 0x828, int)
 #define IOCTL_BCM_GPIO_SET_REQUEST		_IOW(BCM_IOCTL, 0x82A, int)
 #define IOCTL_BCM_GPIO_STATUS_REQUEST		_IOW(BCM_IOCTL, 0x82b, int)
 #define IOCTL_BCM_GET_DSX_INDICATION		_IOR(BCM_IOCTL, 0x854, int)
 #define IOCTL_BCM_BUFFER_DOWNLOAD_START		_IOW(BCM_IOCTL, 0x855, int)
 #define IOCTL_BCM_BUFFER_DOWNLOAD		_IOW(BCM_IOCTL, 0x856, int)
 #define IOCTL_BCM_BUFFER_DOWNLOAD_STOP		_IOW(BCM_IOCTL, 0x857, int)
 #define IOCTL_BCM_REGISTER_WRITE_PRIVATE	_IOW(BCM_IOCTL, 0x826, char)
 #define IOCTL_BCM_REGISTER_READ_PRIVATE		_IOW(BCM_IOCTL, 0x827, char)
 #define IOCTL_BCM_SET_DEBUG			_IOW(BCM_IOCTL, 0x824, struct bcm_ioctl_buffer)
 #define IOCTL_BCM_EEPROM_REGISTER_WRITE		_IOW(BCM_IOCTL, 0x858, int)
 #define IOCTL_BCM_EEPROM_REGISTER_READ		_IOR(BCM_IOCTL, 0x859, int)
 #define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE	_IOR(BCM_IOCTL, 0x860, int)
 #define IOCTL_BCM_SET_MAC_TRACING		_IOW(BCM_IOCTL, 0x82c, int)
 #define IOCTL_BCM_GET_HOST_MIBS			_IOW(BCM_IOCTL, 0x853, int)
 #define IOCTL_BCM_NVM_READ			_IOR(BCM_IOCTL, 0x861, int)
 #define IOCTL_BCM_NVM_WRITE			_IOW(BCM_IOCTL, 0x862, int)
 #define IOCTL_BCM_GET_NVM_SIZE			_IOR(BCM_IOCTL, 0x863, int)
 #define IOCTL_BCM_CAL_INIT			_IOR(BCM_IOCTL, 0x864, int)
 #define IOCTL_BCM_BULK_WRM			_IOW(BCM_IOCTL, 0x90B, int)
 #define IOCTL_BCM_FLASH2X_SECTION_READ		_IOR(BCM_IOCTL, 0x865, int)
 #define IOCTL_BCM_FLASH2X_SECTION_WRITE		_IOW(BCM_IOCTL, 0x866, int)
 #define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP	_IOR(BCM_IOCTL, 0x867, int)
 #define IOCTL_BCM_SET_ACTIVE_SECTION		_IOW(BCM_IOCTL, 0x868, int)
 #define	IOCTL_BCM_IDENTIFY_ACTIVE_SECTION	_IO(BCM_IOCTL, 0x869)
 #define IOCTL_BCM_COPY_SECTION			_IOW(BCM_IOCTL, 0x870, int)
 #define	IOCTL_BCM_GET_FLASH_CS_INFO		_IOR(BCM_IOCTL, 0x871, int)
 #define IOCTL_BCM_SELECT_DSD			_IOW(BCM_IOCTL, 0x872, int)
 #define IOCTL_BCM_NVM_RAW_READ			_IOR(BCM_IOCTL, 0x875, int)
 #define IOCTL_BCM_CNTRLMSG_MASK			_IOW(BCM_IOCTL, 0x874, int)
 #define IOCTL_BCM_GET_DEVICE_DRIVER_INFO	_IOR(BCM_IOCTL, 0x877, int)
 #define IOCTL_BCM_TIME_SINCE_NET_ENTRY		_IOR(BCM_IOCTL, 0x876, int)
 #define BCM_LED_THREAD_STATE_CHANGE_REQ		_IOW(BCM_IOCTL, 0x878, int)
 #define IOCTL_BCM_GPIO_MULTI_REQUEST		_IOW(BCM_IOCTL, 0x82D, struct bcm_ioctl_buffer)
 #define IOCTL_BCM_GPIO_MODE_REQUEST		_IOW(BCM_IOCTL, 0x82E, struct bcm_ioctl_buffer)

 enum bcm_interface_type {
 	BCM_MII,
 	BCM_CARDBUS,
 	BCM_USB,
 	BCM_SDIO,
 	BCM_PCMCIA
 };

 struct bcm_driver_info {
 	enum bcm_nvm_type	u32NVMType;
 	unsigned int		MaxRDMBufferSize;
 	enum bcm_interface_type	u32InterfaceType;
 	unsigned int		u32DSDStartOffset;
 	unsigned int		u32RxAlignmentCorrection;
 	unsigned int		u32Reserved[10];
 };

 struct bcm_nvm_readwrite {
 	void __user *pBuffer;
 	uint32_t  uiOffset;
 	uint32_t uiNumBytes;
 	bool bVerify;
 };

 struct bcm_bulk_wrm_buffer {
 	unsigned long Register;
 	unsigned long SwapEndian;
 	unsigned long Values[1];
 };

 enum bcm_flash2x_section_val {
 	NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
 	ISO_IMAGE1,
 	ISO_IMAGE2,
 	DSD0,
 	DSD1,
 	DSD2,
 	VSA0,
 	VSA1,
 	VSA2,
 	SCSI,
 	CONTROL_SECTION,
 	ISO_IMAGE1_PART2,
 	ISO_IMAGE1_PART3,
 	ISO_IMAGE2_PART2,
 	ISO_IMAGE2_PART3,
 	TOTAL_SECTIONS
 };

 /*
  * Structure used for READ/WRITE Flash Map2.x
  */
 struct bcm_flash2x_readwrite {
 	enum bcm_flash2x_section_val Section; /* which section has to be read/written */
 	u32 offset;	     /* Offset within Section. */
 	u32 numOfBytes;	     /* NOB from the offset */
 	u32 bVerify;
 	void __user *pDataBuff;	     /* Buffer for reading/writing */
 };

 /*
  * This structure is used for coping one section to other.
  * there are two ways to copy one section to other.
  * it NOB =0, complete section will be copied on to other.
  * if NOB !=0, only NOB will be copied from the given offset.
  */

 struct bcm_flash2x_copy_section {
 	enum bcm_flash2x_section_val SrcSection;
 	enum bcm_flash2x_section_val DstSection;
 	u32 offset;
 	u32 numOfBytes;
 };

 /*
  * This section provide the complete bitmap of the Flash.
  * using this map lib/APP will issue read/write command.
  * Fields are defined as :
  * Bit [0] = section is present  //1:present, 0: Not present
  * Bit [1] = section is valid  //1: valid, 0: not valid
  * Bit [2] = Section is R/W  //0: RW, 1: RO
  * Bit [3] = Section is Active or not 1 means Active, 0->inactive
  * Bit [7...3] = Reserved
  */

 struct bcm_flash2x_bitmap {
 	unsigned char ISO_IMAGE1;
 	unsigned char ISO_IMAGE2;
 	unsigned char DSD0;
 	unsigned char DSD1;
 	unsigned char DSD2;
 	unsigned char VSA0;
 	unsigned char VSA1;
 	unsigned char VSA2;
 	unsigned char SCSI;
 	unsigned char CONTROL_SECTION;
 	/* Reserved for future use */
 	unsigned char Reserved0;
 	unsigned char Reserved1;
 	unsigned char Reserved2;
 };

 struct bcm_time_elapsed {
 	u64 ul64TimeElapsedSinceNetEntry;
 	u32 uiReserved[4];
 };

 enum {
 	WIMAX_IDX = 0,  /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
 	HOST_IDX,	/* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
 	MAX_IDX
 };

 struct bcm_gpio_multi_info {
 	unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
 	unsigned int uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO */
 	unsigned int uiGPIOValue;   /* 0 or 1; value to be set when command is 1. */
 } __packed;

 struct bcm_gpio_multi_mode {
 	unsigned int uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode */
 	unsigned int uiGPIOMask;    /* GPIO mask to set mode */
 } __packed;

 #endif
	#ifndef _IOCTL_H_
	#define _IOCTL_H_

	struct bcm_rdm_buffer {
	unsigned long Register;
	unsigned long Length;
	} __packed;

	struct bcm_wrm_buffer {
	unsigned long Register;
	unsigned long Length;
	unsigned char Data[4];
	} __packed;

	struct bcm_ioctl_buffer {
	void __user *InputBuffer;
	unsigned long InputLength;
	void __user *OutputBuffer;
	unsigned long OutputLength;
	} __packed;

	struct bcm_gpio_info {
	unsigned int uiGpioNumber; /* valid numbers 0-15 */
	unsigned int uiGpioValue; /* 1 set ; 0 not set */
	} __packed;

	struct bcm_user_thread_req {
	/* 0->Inactivate LED thread. */
	/* 1->Activate the LED thread */
	unsigned int ThreadState;
	} __packed;

	#define LED_THREAD_ACTIVATION_REQ 1
	#define BCM_IOCTL 'k'
	#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int)
	#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int)
	#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int)
	#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)
	#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)
	#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)
	#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)
	#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
	#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
	#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
	#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
	#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
	#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
	#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)
	#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
	#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
	#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
	#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
	#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
	#define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814)
	#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
	#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, struct bcm_ioctl_buffer)
	#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
	#define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char)
	#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817, char)
	#define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long)
	#define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long)
	#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
	#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
	#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
	#define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int)
	#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
	#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
	#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
	#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
	#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
	#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
	#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
	#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
	#define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char)
	#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, struct bcm_ioctl_buffer)
	#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
	#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
	#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int)
	#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
	#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
	#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
	#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
	#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
	#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
	#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
	#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
	#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
	#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
	#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
	#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
	#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
	#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
	#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
	#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
	#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
	#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
	#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
	#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
	#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, struct bcm_ioctl_buffer)
	#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, struct bcm_ioctl_buffer)

	enum bcm_interface_type {
	BCM_MII,
	BCM_CARDBUS,
	BCM_USB,
	BCM_SDIO,
	BCM_PCMCIA
	};

	struct bcm_driver_info {
	enum bcm_nvm_type u32NVMType;
	unsigned int MaxRDMBufferSize;
	enum bcm_interface_type u32InterfaceType;
	unsigned int u32DSDStartOffset;
	unsigned int u32RxAlignmentCorrection;
	unsigned int u32Reserved[10];
	};

	struct bcm_nvm_readwrite {
	void __user *pBuffer;
	uint32_t uiOffset;
	uint32_t uiNumBytes;
	bool bVerify;
	};

	struct bcm_bulk_wrm_buffer {
	unsigned long Register;
	unsigned long SwapEndian;
	unsigned long Values[1];
	};

	enum bcm_flash2x_section_val {
	NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
	ISO_IMAGE1,
	ISO_IMAGE2,
	DSD0,
	DSD1,
	DSD2,
	VSA0,
	VSA1,
	VSA2,
	SCSI,
	CONTROL_SECTION,
	ISO_IMAGE1_PART2,
	ISO_IMAGE1_PART3,
	ISO_IMAGE2_PART2,
	ISO_IMAGE2_PART3,
	TOTAL_SECTIONS
	};

	/*
	* Structure used for READ/WRITE Flash Map2.x
	*/
	struct bcm_flash2x_readwrite {
	enum bcm_flash2x_section_val Section; /* which section has to be read/written */
	u32 offset; /* Offset within Section. */
	u32 numOfBytes; /* NOB from the offset */
	u32 bVerify;
	void __user pDataBuff; / Buffer for reading/writing */
	};

	/*
	* This structure is used for coping one section to other.
	* there are two ways to copy one section to other.
	* it NOB =0, complete section will be copied on to other.
	* if NOB !=0, only NOB will be copied from the given offset.
	*/

	struct bcm_flash2x_copy_section {
	enum bcm_flash2x_section_val SrcSection;
	enum bcm_flash2x_section_val DstSection;
	u32 offset;
	u32 numOfBytes;
	};

	/*
	* This section provide the complete bitmap of the Flash.
	* using this map lib/APP will issue read/write command.
	* Fields are defined as :
	* Bit [0] = section is present //1:present, 0: Not present
	* Bit [1] = section is valid //1: valid, 0: not valid
	* Bit [2] = Section is R/W //0: RW, 1: RO
	* Bit [3] = Section is Active or not 1 means Active, 0->inactive
	* Bit [7...3] = Reserved
	*/

	struct bcm_flash2x_bitmap {
	unsigned char ISO_IMAGE1;
	unsigned char ISO_IMAGE2;
	unsigned char DSD0;
	unsigned char DSD1;
	unsigned char DSD2;
	unsigned char VSA0;
	unsigned char VSA1;
	unsigned char VSA2;
	unsigned char SCSI;
	unsigned char CONTROL_SECTION;
	/* Reserved for future use */
	unsigned char Reserved0;
	unsigned char Reserved1;
	unsigned char Reserved2;
	};

	struct bcm_time_elapsed {
	u64 ul64TimeElapsedSinceNetEntry;
	u32 uiReserved[4];
	};

	enum {
	WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
	HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
	MAX_IDX
	};

	struct bcm_gpio_multi_info {
	unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
	unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
	unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
	} __packed;

	struct bcm_gpio_multi_mode {
	unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
	unsigned int uiGPIOMask; /* GPIO mask to set mode */
	} __packed;

	#endif