| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * tps65910.c -- TI TPS6591x |
| * |
| * Copyright 2010 Texas Instruments Inc. |
| * |
| * Author: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/debugfs.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/tps65910.h> |
| |
| #define COMP1 0 |
| #define COMP2 1 |
| |
| /* Comparator 1 voltage selection table in millivolts */ |
| static const u16 COMP_VSEL_TABLE[] = { |
| 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650, |
| 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050, |
| 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450, |
| 3500, |
| }; |
| |
| struct comparator { |
| const char *name; |
| int reg; |
| int uV_max; |
| const u16 *vsel_table; |
| }; |
| |
| static struct comparator tps_comparators[] = { |
| { |
| .name = "COMP1", |
| .reg = TPS65911_VMBCH, |
| .uV_max = 3500, |
| .vsel_table = COMP_VSEL_TABLE, |
| }, |
| { |
| .name = "COMP2", |
| .reg = TPS65911_VMBCH2, |
| .uV_max = 3500, |
| .vsel_table = COMP_VSEL_TABLE, |
| }, |
| }; |
| |
| static int comp_threshold_set(struct tps65910 *tps65910, int id, int voltage) |
| { |
| struct comparator tps_comp = tps_comparators[id]; |
| int curr_voltage = 0; |
| int ret; |
| u8 index = 0, val; |
| |
| while (curr_voltage < tps_comp.uV_max) { |
| curr_voltage = tps_comp.vsel_table[index]; |
| if (curr_voltage >= voltage) |
| break; |
| else if (curr_voltage < voltage) |
| index ++; |
| } |
| |
| if (curr_voltage > tps_comp.uV_max) |
| return -EINVAL; |
| |
| val = index << 1; |
| ret = tps65910_reg_write(tps65910, tps_comp.reg, val); |
| |
| return ret; |
| } |
| |
| static int comp_threshold_get(struct tps65910 *tps65910, int id) |
| { |
| struct comparator tps_comp = tps_comparators[id]; |
| unsigned int val; |
| int ret; |
| |
| ret = tps65910_reg_read(tps65910, tps_comp.reg, &val); |
| if (ret < 0) |
| return ret; |
| |
| val >>= 1; |
| return tps_comp.vsel_table[val]; |
| } |
| |
| static ssize_t comp_threshold_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct tps65910 *tps65910 = dev_get_drvdata(dev->parent); |
| struct attribute comp_attr = attr->attr; |
| int id, uVolt; |
| |
| if (!strcmp(comp_attr.name, "comp1_threshold")) |
| id = COMP1; |
| else if (!strcmp(comp_attr.name, "comp2_threshold")) |
| id = COMP2; |
| else |
| return -EINVAL; |
| |
| uVolt = comp_threshold_get(tps65910, id); |
| |
| return sprintf(buf, "%d\n", uVolt); |
| } |
| |
| static DEVICE_ATTR(comp1_threshold, S_IRUGO, comp_threshold_show, NULL); |
| static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); |
| |
| static int tps65911_comparator_probe(struct platform_device *pdev) |
| { |
| struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); |
| struct tps65910_board *pdata = dev_get_platdata(tps65910->dev); |
| int ret; |
| |
| ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "cannot set COMP1 threshold\n"); |
| return ret; |
| } |
| |
| ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "cannot set COMP2 threshold\n"); |
| return ret; |
| } |
| |
| /* Create sysfs entry */ |
| ret = device_create_file(&pdev->dev, &dev_attr_comp1_threshold); |
| if (ret < 0) |
| dev_err(&pdev->dev, "failed to add COMP1 sysfs file\n"); |
| |
| ret = device_create_file(&pdev->dev, &dev_attr_comp2_threshold); |
| if (ret < 0) |
| dev_err(&pdev->dev, "failed to add COMP2 sysfs file\n"); |
| |
| return ret; |
| } |
| |
| static int tps65911_comparator_remove(struct platform_device *pdev) |
| { |
| struct tps65910 *tps65910; |
| |
| tps65910 = dev_get_drvdata(pdev->dev.parent); |
| device_remove_file(&pdev->dev, &dev_attr_comp2_threshold); |
| device_remove_file(&pdev->dev, &dev_attr_comp1_threshold); |
| |
| return 0; |
| } |
| |
| static struct platform_driver tps65911_comparator_driver = { |
| .driver = { |
| .name = "tps65911-comparator", |
| }, |
| .probe = tps65911_comparator_probe, |
| .remove = tps65911_comparator_remove, |
| }; |
| |
| static int __init tps65911_comparator_init(void) |
| { |
| return platform_driver_register(&tps65911_comparator_driver); |
| } |
| subsys_initcall(tps65911_comparator_init); |
| |
| static void __exit tps65911_comparator_exit(void) |
| { |
| platform_driver_unregister(&tps65911_comparator_driver); |
| } |
| module_exit(tps65911_comparator_exit); |
| |
| MODULE_AUTHOR("Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>"); |
| MODULE_DESCRIPTION("TPS65911 comparator driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:tps65911-comparator"); |