| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8994.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| clocks { |
| xo_board: xo_board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| }; |
| |
| sleep_clk: sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| }; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| |
| CPU4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_1>; |
| L2_1: l2-cache { |
| compatible = "cache"; |
| cache-level = <2>; |
| }; |
| }; |
| |
| CPU5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| CPU6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| CPU7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_1>; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-msm8994", "qcom,scm"; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0 0 0 0>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "hvc"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| smem_mem: smem_region@6a00000 { |
| reg = <0x0 0x6a00000 0x0 0x200000>; |
| no-map; |
| }; |
| }; |
| |
| smd { |
| compatible = "qcom,smd"; |
| rpm { |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,ipc = <&apcs 8 0>; |
| qcom,smd-edge = <15>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <6>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-msm8994"; |
| qcom,smd-channels = "rpm_requests"; |
| |
| rpmcc: rpmcc { |
| compatible = "qcom,rpmcc-msm8994"; |
| #clock-cells = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| soc: soc { |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| intc: interrupt-controller@f9000000 { |
| compatible = "qcom,msm-qgic2"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| reg = <0xf9000000 0x1000>, |
| <0xf9002000 0x1000>; |
| }; |
| |
| apcs: mailbox@f900d000 { |
| compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; |
| reg = <0xf900d000 0x2000>; |
| #mbox-cells = <1>; |
| }; |
| |
| timer@f9020000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0xf9020000 0x1000>; |
| |
| frame@f9021000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9021000 0x1000>, |
| <0xf9022000 0x1000>; |
| }; |
| |
| frame@f9023000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9023000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9024000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9024000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9025000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9025000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9026000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9026000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9027000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9027000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@f9028000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0xf9028000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sdhc1: sdhci@f9824900 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clocks = <&gcc GCC_SDCC1_APPS_CLK>, |
| <&gcc GCC_SDCC1_AHB_CLK>, |
| <&xo_board>; |
| clock-names = "core", "iface", "xo"; |
| |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| bus-width = <8>; |
| non-removable; |
| status = "disabled"; |
| }; |
| |
| blsp1_dma: dma@f9904000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0xf9904000 0x19000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| qcom,controlled-remotely; |
| num-channels = <18>; |
| qcom,num-ees = <4>; |
| }; |
| |
| blsp1_uart2: serial@f991e000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0xf991e000 0x1000>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core", "iface"; |
| clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp1_uart2_default>; |
| pinctrl-1 = <&blsp1_uart2_sleep>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c1: i2c@f9923000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0xf9923000 0x500>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c1_default>; |
| pinctrl-1 = <&i2c1_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_spi0: spi@f9923000 { |
| compatible = "qcom,spi-qup-v2.2.1"; |
| reg = <0xf9923000 0x500>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| spi-max-frequency = <19200000>; |
| dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp1_spi0_default>; |
| pinctrl-1 = <&blsp1_spi0_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c2: i2c@f9924000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0xf9924000 0x500>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| clock-frequency = <355000>; |
| dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c2_default>; |
| pinctrl-1 = <&i2c2_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| /* I2C3 doesn't exist */ |
| |
| blsp_i2c4: i2c@f9926000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0xf9926000 0x500>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| clock-frequency = <355000>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c4_default>; |
| pinctrl-1 = <&i2c4_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp2_dma: dma@f9944000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0xf9944000 0x19000>; |
| interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| qcom,controlled-remotely; |
| num-channels = <18>; |
| qcom,num-ees = <4>; |
| }; |
| |
| /* According to downstream kernels, i2c6 |
| * comes before i2c5 address-wise... |
| */ |
| |
| blsp_i2c6: i2c@f9928000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0xf9928000 0x500>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>, |
| <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| clock-frequency = <355000>; |
| dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c6_default>; |
| pinctrl-1 = <&i2c6_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| blsp2_uart2: serial@f995e000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0xf995e000 0x1000>; |
| interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>; |
| clock-names = "core", "iface"; |
| clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| dmas = <&blsp2_dma 2>, <&blsp2_dma 3>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&blsp2_uart2_default>; |
| pinctrl-1 = <&blsp2_uart2_sleep>; |
| status = "disabled"; |
| }; |
| |
| blsp_i2c5: i2c@f9967000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0xf9967000 0x500>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_AHB_CLK>, |
| <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; |
| clock-names = "iface", "core"; |
| clock-frequency = <355000>; |
| dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&i2c5_default>; |
| pinctrl-1 = <&i2c5_sleep>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| gcc: clock-controller@fc400000 { |
| compatible = "qcom,gcc-msm8994"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0xfc400000 0x2000>; |
| }; |
| |
| rpm_msg_ram: memory@fc428000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0xfc428000 0x4000>; |
| }; |
| |
| restart@fc4ab000 { |
| compatible = "qcom,pshold"; |
| reg = <0xfc4ab000 0x4>; |
| }; |
| |
| spmi_bus: spmi@fc4c0000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0xfc4cf000 0x1000>, |
| <0xfc4cb000 0x1000>, |
| <0xfc4ca000 0x1000>; |
| reg-names = "core", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| }; |
| |
| tcsr_mutex_regs: syscon@fd484000 { |
| compatible = "syscon"; |
| reg = <0xfd484000 0x2000>; |
| }; |
| |
| tlmm: pinctrl@fd510000 { |
| compatible = "qcom,msm8994-pinctrl"; |
| reg = <0xfd510000 0x4000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| gpio-ranges = <&tlmm 0 0 146>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| |
| blsp1_uart2_default: blsp1-uart2-default { |
| function = "blsp_uart2"; |
| pins = "gpio4", "gpio5"; |
| drive-strength = <16>; |
| bias-disable; |
| }; |
| |
| blsp1_uart2_sleep: blsp1-uart2-sleep { |
| function = "gpio"; |
| pins = "gpio4", "gpio5"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| blsp2_uart2_default: blsp2-uart2-default { |
| function = "blsp_uart8"; |
| pins = "gpio45", "gpio46"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp2_uart2_sleep: blsp2-uart2-sleep { |
| function = "gpio"; |
| pins = "gpio45", "gpio46"; |
| drive-strength = <2>; |
| bias-pull-down; |
| }; |
| |
| i2c1_default: i2c1-default { |
| function = "blsp_i2c1"; |
| pins = "gpio2", "gpio3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c1_sleep: i2c1-sleep { |
| function = "gpio"; |
| pins = "gpio2", "gpio3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c2_default: i2c2-default { |
| function = "blsp_i2c2"; |
| pins = "gpio6", "gpio7"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c2_sleep: i2c2-sleep { |
| function = "gpio"; |
| pins = "gpio6", "gpio7"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c4_default: i2c4-default { |
| function = "blsp_i2c4"; |
| pins = "gpio19", "gpio20"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c4_sleep: i2c4-sleep { |
| function = "gpio"; |
| pins = "gpio19", "gpio20"; |
| drive-strength = <2>; |
| bias-pull-down; |
| input-enable; |
| }; |
| |
| i2c5_default: i2c5-default { |
| function = "blsp_i2c5"; |
| pins = "gpio23", "gpio24"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c5_sleep: i2c5-sleep { |
| function = "gpio"; |
| pins = "gpio23", "gpio24"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c6_default: i2c6-default { |
| function = "blsp_i2c6"; |
| pins = "gpio28", "gpio27"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| i2c6_sleep: i2c6-sleep { |
| function = "gpio"; |
| pins = "gpio28", "gpio27"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| blsp1_spi0_default: blsp1-spi0-default { |
| default { |
| function = "blsp_spi1"; |
| pins = "gpio0", "gpio1", "gpio3"; |
| drive-strength = <10>; |
| bias-pull-down; |
| }; |
| cs { |
| function = "gpio"; |
| pins = "gpio8"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| blsp1_spi0_sleep: blsp1-spi0-sleep { |
| pins = "gpio0", "gpio1", "gpio3"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| sdc1_clk_on: clk-on { |
| pins = "sdc1_clk"; |
| bias-disable; |
| drive-strength = <16>; |
| }; |
| |
| sdc1_clk_off: clk-off { |
| pins = "sdc1_clk"; |
| bias-disable; |
| drive-strength = <2>; |
| }; |
| |
| sdc1_cmd_on: cmd-on { |
| pins = "sdc1_cmd"; |
| bias-pull-up; |
| drive-strength = <8>; |
| }; |
| |
| sdc1_cmd_off: cmd-off { |
| pins = "sdc1_cmd"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| sdc1_data_on: data-on { |
| pins = "sdc1_data"; |
| bias-pull-up; |
| drive-strength = <8>; |
| }; |
| |
| sdc1_data_off: data-off { |
| pins = "sdc1_data"; |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| sdc1_rclk_on: rclk-on { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| |
| sdc1_rclk_off: rclk-off { |
| pins = "sdc1_rclk"; |
| bias-pull-down; |
| }; |
| }; |
| }; |
| |
| tcsr_mutex: hwlock { |
| compatible = "qcom,tcsr-mutex"; |
| syscon = <&tcsr_mutex_regs 0 0x80>; |
| #hwlock-cells = <1>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 2 0xff08>, |
| <GIC_PPI 3 0xff08>, |
| <GIC_PPI 4 0xff08>, |
| <GIC_PPI 1 0xff08>; |
| }; |
| |
| vreg_vph_pwr: vreg-vph-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph-pwr"; |
| |
| regulator-min-microvolt = <3600000>; |
| regulator-max-microvolt = <3600000>; |
| |
| regulator-always-on; |
| }; |
| }; |
| |
