| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2020, Linaro Ltd. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "sm8250.dtsi" |
| #include "pm8150.dtsi" |
| #include "pm8150b.dtsi" |
| #include "pm8150l.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. Robotics RB5"; |
| compatible = "qcom,qrb5165-rb5", "qcom,sm8250"; |
| |
| aliases { |
| serial0 = &uart12; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| dc12v: dc12v-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "DC12V"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| regulator-always-on; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| user4 { |
| label = "green:user4"; |
| gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "panic-indicator"; |
| default-state = "off"; |
| }; |
| |
| wlan { |
| label = "yellow:wlan"; |
| gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "phy0tx"; |
| default-state = "off"; |
| }; |
| |
| bt { |
| label = "blue:bt"; |
| gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "bluetooth-power"; |
| default-state = "off"; |
| }; |
| |
| }; |
| |
| vbat: vbat-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "VBAT"; |
| vin-supply = <&vreg_l11c_3p3>; |
| regulator-min-microvolt = <4200000>; |
| regulator-max-microvolt = <4200000>; |
| regulator-always-on; |
| }; |
| |
| vbat_som: vbat-som-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "VBAT_SOM"; |
| vin-supply = <&dc12v>; |
| regulator-min-microvolt = <4200000>; |
| regulator-max-microvolt = <4200000>; |
| regulator-always-on; |
| }; |
| |
| vdc_3v3: vdc-3v3-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDC_3V3"; |
| vin-supply = <&dc12v>; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vdc_5v: vdc-5v-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "VDC_5V"; |
| |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| vin-supply = <&vreg_l11c_3p3>; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| regulator-always-on; |
| }; |
| |
| vreg_s4a_1p8: vreg-s4a-1p8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vreg_s4a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| }; |
| |
| &apps_rsc { |
| pm8009-rpmh-regulators { |
| compatible = "qcom,pm8009-rpmh-regulators"; |
| qcom,pmic-id = "f"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-l2-supply = <&vreg_s8c_1p3>; |
| vdd-l5-l6-supply = <&vreg_bob>; |
| vdd-l7-supply = <&vreg_s4a_1p8>; |
| |
| vreg_l1f_1p1: ldo1 { |
| regulator-name = "vreg_l1f_1p1"; |
| regulator-min-microvolt = <1104000>; |
| regulator-max-microvolt = <1104000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2f_1p2: ldo2 { |
| regulator-name = "vreg_l2f_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6f_2p8: ldo6 { |
| regulator-name = "vreg_l6f_2p8"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7f_1p8: ldo7 { |
| regulator-name = "vreg_l7f_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| pm8150-rpmh-regulators { |
| compatible = "qcom,pm8150-rpmh-regulators"; |
| qcom,pmic-id = "a"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| vdd-l2-l10-supply = <&vreg_bob>; |
| vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; |
| vdd-l6-l9-supply = <&vreg_s8c_1p3>; |
| vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; |
| vdd-l13-l16-l17-supply = <&vreg_bob>; |
| |
| vreg_l2a_3p1: ldo2 { |
| regulator-name = "vreg_l2a_3p1"; |
| regulator-min-microvolt = <3072000>; |
| regulator-max-microvolt = <3072000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3a_0p9: ldo3 { |
| regulator-name = "vreg_l3a_0p9"; |
| regulator-min-microvolt = <928000>; |
| regulator-max-microvolt = <932000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5a_0p88: ldo5 { |
| regulator-name = "vreg_l5a_0p88"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6a_1p2: ldo6 { |
| regulator-name = "vreg_l6a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7a_1p7: ldo7 { |
| regulator-name = "vreg_l7a_1p7"; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9a_1p2: ldo9 { |
| regulator-name = "vreg_l9a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10a_1p8: ldo10 { |
| regulator-name = "vreg_l10a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l12a_1p8: ldo12 { |
| regulator-name = "vreg_l12a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l13a_ts_3p0: ldo13 { |
| regulator-name = "vreg_l13a_ts_3p0"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l14a_1p8: ldo14 { |
| regulator-name = "vreg_l14a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1880000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l15a_1p8: ldo15 { |
| regulator-name = "vreg_l15a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l16a_2p7: ldo16 { |
| regulator-name = "vreg_l16a_2p7"; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l17a_3p0: ldo17 { |
| regulator-name = "vreg_l17a_3p0"; |
| regulator-min-microvolt = <2856000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l18a_0p92: ldo18 { |
| regulator-name = "vreg_l18a_0p92"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s5a_1p9: smps5 { |
| regulator-name = "vreg_s5a_1p9"; |
| regulator-min-microvolt = <1904000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_s6a_0p95: smps6 { |
| regulator-name = "vreg_s6a_0p95"; |
| regulator-min-microvolt = <920000>; |
| regulator-max-microvolt = <1128000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| pm8150l-rpmh-regulators { |
| compatible = "qcom,pm8150l-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-l1-l8-supply = <&vreg_s4a_1p8>; |
| vdd-l2-l3-supply = <&vreg_s8c_1p3>; |
| vdd-l4-l5-l6-supply = <&vreg_bob>; |
| vdd-l7-l11-supply = <&vreg_bob>; |
| vdd-l9-l10-supply = <&vreg_bob>; |
| vdd-bob-supply = <&vph_pwr>; |
| |
| vreg_bob: bob { |
| regulator-name = "vreg_bob"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <4000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| |
| vreg_l1c_1p8: ldo1 { |
| regulator-name = "vreg_l1c_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l2c_1p2: ldo2 { |
| regulator-name = "vreg_l2c_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l3c_0p8: ldo3 { |
| regulator-name = "vreg_l3c_0p8"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l4c_1p7: ldo4 { |
| regulator-name = "vreg_l4c_1p7"; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <2928000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l5c_1p8: ldo5 { |
| regulator-name = "vreg_l5c_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2928000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l6c_2p96: ldo6 { |
| regulator-name = "vreg_l6c_2p96"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l7c_cam_vcm0_2p85: ldo7 { |
| regulator-name = "vreg_l7c_cam_vcm0_2p85"; |
| regulator-min-microvolt = <2856000>; |
| regulator-max-microvolt = <3104000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l8c_1p8: ldo8 { |
| regulator-name = "vreg_l8c_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l9c_2p96: ldo9 { |
| regulator-name = "vreg_l9c_2p96"; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l10c_3p0: ldo10 { |
| regulator-name = "vreg_l10c_3p0"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| vreg_l11c_3p3: ldo11 { |
| regulator-name = "vreg_l11c_3p3"; |
| regulator-min-microvolt = <3296000>; |
| regulator-max-microvolt = <3296000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| regulator-always-on; |
| }; |
| |
| vreg_s8c_1p3: smps8 { |
| regulator-name = "vreg_s8c_1p3"; |
| regulator-min-microvolt = <1352000>; |
| regulator-max-microvolt = <1352000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| }; |
| |
| /* LS-I2C0 */ |
| &i2c4 { |
| status = "okay"; |
| }; |
| |
| &i2c5 { |
| status = "okay"; |
| }; |
| |
| /* LS-I2C1 */ |
| &i2c15 { |
| status = "okay"; |
| }; |
| |
| &pm8150_gpios { |
| gpio-reserved-ranges = <1 1>, <3 2>, <7 1>; |
| gpio-line-names = |
| "NC", |
| "OPTION2", |
| "PM_GPIO-F", |
| "PM_SLP_CLK_IN", |
| "OPTION1", |
| "VOL_UP_N", |
| "PM8250_GPIO7", /* Blue LED */ |
| "SP_ARI_PWR_ALARM", |
| "GPIO_9_P", /* Yellow LED */ |
| "GPIO_10_P"; /* Green LED */ |
| }; |
| |
| &pm8150b_gpios { |
| gpio-line-names = |
| "NC", |
| "NC", |
| "NC", |
| "NC", |
| "HAP_BOOST_EN", /* SOM */ |
| "SMB_STAT", /* SOM */ |
| "NC", |
| "NC", |
| "SDM_FORCE_USB_BOOT", |
| "NC", |
| "NC", |
| "NC"; |
| }; |
| |
| &pm8150l_gpios { |
| gpio-line-names = |
| "NC", |
| "PM3003A_EN", |
| "NC", |
| "NC", |
| "PM_GPIO5", /* HDMI RST_N */ |
| "PM_GPIO-A", /* PWM */ |
| "PM_GPIO7", |
| "NC", |
| "NC", |
| "PM_GPIO-B", |
| "NC", |
| "PM3003A_MODE"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_2 { |
| status = "okay"; |
| }; |
| |
| /* CAN */ |
| &spi0 { |
| status = "okay"; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <40 4>; |
| gpio-line-names = |
| "GPIO-MM", |
| "GPIO-NN", |
| "GPIO-OO", |
| "GPIO-PP", |
| "GPIO-A", |
| "GPIO-C", |
| "GPIO-E", |
| "GPIO-D", |
| "I2C0-SDA", |
| "I2C0-SCL", |
| "GPIO-TT", /* GPIO_10 */ |
| "NC", |
| "GPIO_12_I2C_SDA", |
| "GPIO_13_I2C_SCL", |
| "GPIO-X", |
| "GPIO_15_RGMII_INT", |
| "HST_BT_UART_CTS", |
| "HST_BT_UART_RFR", |
| "HST_BT_UART_TX", |
| "HST_BT_UART_RX", |
| "HST_WLAN_EN", /* GPIO_20 */ |
| "HST_BT_EN", |
| "GPIO-AAA", |
| "GPIO-BBB", |
| "GPIO-CCC", |
| "GPIO-Z", |
| "GPIO-DDD", |
| "GPIO-BB", |
| "GPIO_28_CAN_SPI_MISO", |
| "GPIO_29_CAN_SPI_MOSI", |
| "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */ |
| "GPIO_31_CAN_SPI_CS", |
| "GPIO-UU", |
| "NC", |
| "UART1_TXD_SOM", |
| "UART1_RXD_SOM", |
| "UART0_CTS", |
| "UART0_RTS", |
| "UART0_TXD", |
| "UART0_RXD", |
| "SPI1_MISO", /* GPIO_40 */ |
| "SPI1_MOSI", |
| "SPI1_CLK", |
| "SPI1_CS", |
| "I2C1_SDA", |
| "I2C1_SCL", |
| "GPIO-F", |
| "GPIO-JJ", |
| "Board_ID1", |
| "Board_ID2", |
| "NC", /* GPIO_50 */ |
| "NC", |
| "SPI0_MISO", |
| "SPI0_MOSI", |
| "SPI0_SCLK", |
| "SPI0_CS", |
| "GPIO-QQ", |
| "GPIO-RR", |
| "USB2LAN_RESET", |
| "USB2LAN_EXTWAKE", |
| "NC", /* GPIO_60 */ |
| "NC", |
| "NC", |
| "LT9611_INT", |
| "GPIO-AA", |
| "USB_CC_DIR", |
| "GPIO-G", |
| "GPIO-LL", |
| "USB_DP_HPD_1P8", |
| "NC", |
| "NC", /* GPIO_70 */ |
| "SD_CMD", |
| "SD_DAT3", |
| "SD_SCLK", |
| "SD_DAT2", |
| "SD_DAT1", |
| "SD_DAT0", /* BOOT_CFG3 */ |
| "SD_UFS_CARD_DET_N", |
| "GPIO-II", |
| "PCIE0_RST_N", |
| "PCIE0_CLK_REQ_N", /* GPIO_80 */ |
| "PCIE0_WAKE_N", |
| "GPIO-CC", |
| "GPIO-DD", |
| "GPIO-EE", |
| "GPIO-FF", |
| "GPIO-GG", |
| "GPIO-HH", |
| "GPIO-VV", |
| "GPIO-WW", |
| "NC", /* GPIO_90 */ |
| "NC", |
| "GPIO-K", |
| "GPIO-I", |
| "CSI0_MCLK", |
| "CSI1_MCLK", |
| "CSI2_MCLK", |
| "CSI3_MCLK", |
| "GPIO-AA", /* CSI4_MCLK */ |
| "GPIO-BB", /* CSI5_MCLK */ |
| "GPIO-KK", /* GPIO_100 */ |
| "CCI_I2C_SDA0", |
| "CCI_I2C_SCL0", |
| "CCI_I2C_SDA1", |
| "CCI_I2C_SCL1", |
| "CCI_I2C_SDA2", |
| "CCI_I2C_SCL2", |
| "CCI_I2C_SDA3", |
| "CCI_I2C_SCL3", |
| "GPIO-L", |
| "NC", /* GPIO_110 */ |
| "NC", |
| "ACCEL_INT", |
| "GYRO_INT", |
| "GPIO-J", |
| "GPIO-YY", |
| "GPIO-H", |
| "GPIO-ZZ", |
| "NC", |
| "NC", |
| "NC", /* GPIO_120 */ |
| "NC", |
| "MAG_INT", |
| "MAG_DRDY_INT", |
| "HST_SW_CTRL", |
| "GPIO-M", |
| "GPIO-N", |
| "GPIO-O", |
| "GPIO-P", |
| "PS_INT", |
| "WSA1_EN", /* GPIO_130 */ |
| "USB_HUB_RESET", |
| "SDM_FORCE_USB_BOOT", |
| "I2S1_CLK_HDMI", |
| "I2S1_DATA0_HDMI", |
| "I2S1_WS_HDMI", |
| "GPIO-B", |
| "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */ |
| "PCM_CLK", |
| "PCM_DI", |
| "PCM_DO", /* GPIO_140 */ |
| "PCM_FS", |
| "HST_SLIM_CLK", |
| "HST_SLIM_DATA", |
| "GPIO-U", |
| "GPIO-Y", |
| "GPIO-R", |
| "GPIO-Q", |
| "GPIO-S", |
| "GPIO-T", |
| "GPIO-V", /* GPIO_150 */ |
| "GPIO-W", |
| "DMIC_CLK1", |
| "DMIC_DATA1", |
| "DMIC_CLK2", |
| "DMIC_DATA2", |
| "WSA_SWR_CLK", |
| "WSA_SWR_DATA", |
| "DMIC_CLK3", |
| "DMIC_DATA3", |
| "I2C4_SDA", /* GPIO_160 */ |
| "I2C4_SCL", |
| "SPI3_CS1", |
| "SPI3_CS2", |
| "SPI2_MISO_LS3", |
| "SPI2_MOSI_LS3", |
| "SPI2_CLK_LS3", |
| "SPI2_ACCEL_CS_LS3", |
| "SPI2_CS1", |
| "NC", |
| "GPIO-SS", /* GPIO_170 */ |
| "GPIO-XX", |
| "SPI3_MISO", |
| "SPI3_MOSI", |
| "SPI3_CLK", |
| "SPI3_CS", |
| "HST_BLE_SNS_UART_TX", |
| "HST_BLE_SNS_UART_RX", |
| "HST_WLAN_UART_TX", |
| "HST_WLAN_UART_RX"; |
| }; |
| |
| &uart12 { |
| status = "okay"; |
| }; |
| |
| &ufs_mem_hc { |
| status = "okay"; |
| |
| vcc-supply = <&vreg_l17a_3p0>; |
| vcc-max-microamp = <800000>; |
| vccq-supply = <&vreg_l6a_1p2>; |
| vccq-max-microamp = <800000>; |
| vccq2-supply = <&vreg_s4a_1p8>; |
| vccq2-max-microamp = <800000>; |
| }; |
| |
| &ufs_mem_phy { |
| status = "okay"; |
| |
| vdda-phy-supply = <&vreg_l5a_0p88>; |
| vdda-max-microamp = <89900>; |
| vdda-pll-supply = <&vreg_l9a_1p2>; |
| vdda-pll-max-microamp = <18800>; |
| }; |
