| # SPDX-License-Identifier: GPL-2.0 |
| menu "Platform support" |
| |
| source "arch/powerpc/platforms/powernv/Kconfig" |
| source "arch/powerpc/platforms/pseries/Kconfig" |
| source "arch/powerpc/platforms/chrp/Kconfig" |
| source "arch/powerpc/platforms/512x/Kconfig" |
| source "arch/powerpc/platforms/52xx/Kconfig" |
| source "arch/powerpc/platforms/powermac/Kconfig" |
| source "arch/powerpc/platforms/maple/Kconfig" |
| source "arch/powerpc/platforms/pasemi/Kconfig" |
| source "arch/powerpc/platforms/ps3/Kconfig" |
| source "arch/powerpc/platforms/cell/Kconfig" |
| source "arch/powerpc/platforms/8xx/Kconfig" |
| source "arch/powerpc/platforms/82xx/Kconfig" |
| source "arch/powerpc/platforms/83xx/Kconfig" |
| source "arch/powerpc/platforms/85xx/Kconfig" |
| source "arch/powerpc/platforms/86xx/Kconfig" |
| source "arch/powerpc/platforms/embedded6xx/Kconfig" |
| source "arch/powerpc/platforms/44x/Kconfig" |
| source "arch/powerpc/platforms/40x/Kconfig" |
| source "arch/powerpc/platforms/amigaone/Kconfig" |
| |
| config KVM_GUEST |
| bool "KVM Guest support" |
| select EPAPR_PARAVIRT |
| help |
| This option enables various optimizations for running under the KVM |
| hypervisor. Overhead for the kernel when not running inside KVM should |
| be minimal. |
| |
| In case of doubt, say Y |
| |
| config EPAPR_PARAVIRT |
| bool "ePAPR para-virtualization support" |
| help |
| Enables ePAPR para-virtualization support for guests. |
| |
| In case of doubt, say Y |
| |
| config PPC_NATIVE |
| bool |
| depends on PPC_BOOK3S_32 || PPC64 |
| help |
| Support for running natively on the hardware, i.e. without |
| a hypervisor. This option is not user-selectable but should |
| be selected by all platforms that need it. |
| |
| config PPC_OF_BOOT_TRAMPOLINE |
| bool "Support booting from Open Firmware or yaboot" |
| depends on PPC_BOOK3S_32 || PPC64 |
| default y |
| help |
| Support from booting from Open Firmware or yaboot using an |
| Open Firmware client interface. This enables the kernel to |
| communicate with open firmware to retrieve system information |
| such as the device tree. |
| |
| In case of doubt, say Y |
| |
| config PPC_DT_CPU_FTRS |
| bool "Device-tree based CPU feature discovery & setup" |
| depends on PPC_BOOK3S_64 |
| default y |
| help |
| This enables code to use a new device tree binding for describing CPU |
| compatibility and features. Saying Y here will attempt to use the new |
| binding if the firmware provides it. Currently only the skiboot |
| firmware provides this binding. |
| If you're not sure say Y. |
| |
| config UDBG_RTAS_CONSOLE |
| bool "RTAS based debug console" |
| depends on PPC_RTAS |
| |
| config PPC_SMP_MUXED_IPI |
| bool |
| help |
| Select this option if your platform supports SMP and your |
| interrupt controller provides less than 4 interrupts to each |
| cpu. This will enable the generic code to multiplex the 4 |
| messages on to one ipi. |
| |
| config IPIC |
| bool |
| |
| config MPIC |
| bool |
| |
| config MPIC_TIMER |
| bool "MPIC Global Timer" |
| depends on MPIC && FSL_SOC |
| help |
| The MPIC global timer is a hardware timer inside the |
| Freescale PIC complying with OpenPIC standard. When the |
| specified interval times out, the hardware timer generates |
| an interrupt. The driver currently is only tested on fsl |
| chip, but it can potentially support other global timers |
| complying with the OpenPIC standard. |
| |
| config FSL_MPIC_TIMER_WAKEUP |
| tristate "Freescale MPIC global timer wakeup driver" |
| depends on FSL_SOC && MPIC_TIMER && PM |
| help |
| The driver provides a way to wake up the system by MPIC |
| timer. |
| e.g. "echo 5 > /sys/devices/system/mpic/timer_wakeup" |
| |
| config PPC_EPAPR_HV_PIC |
| bool |
| select EPAPR_PARAVIRT |
| |
| config MPIC_WEIRD |
| bool |
| |
| config MPIC_MSGR |
| bool "MPIC message register support" |
| depends on MPIC |
| help |
| Enables support for the MPIC message registers. These |
| registers are used for inter-processor communication. |
| |
| config PPC_I8259 |
| bool |
| |
| config U3_DART |
| bool |
| depends on PPC64 |
| |
| config PPC_RTAS |
| bool |
| |
| config RTAS_ERROR_LOGGING |
| bool |
| depends on PPC_RTAS |
| |
| config PPC_RTAS_DAEMON |
| bool |
| depends on PPC_RTAS |
| |
| config RTAS_PROC |
| bool "Proc interface to RTAS" |
| depends on PPC_RTAS && PROC_FS |
| default y |
| |
| config RTAS_FLASH |
| tristate "Firmware flash interface" |
| depends on PPC64 && RTAS_PROC |
| |
| config MMIO_NVRAM |
| bool |
| |
| config MPIC_U3_HT_IRQS |
| bool |
| |
| config MPIC_BROKEN_REGREAD |
| bool |
| depends on MPIC |
| help |
| This option enables a MPIC driver workaround for some chips |
| that have a bug that causes some interrupt source information |
| to not read back properly. It is safe to use on other chips as |
| well, but enabling it uses about 8KB of memory to keep copies |
| of the register contents in software. |
| |
| config EEH |
| bool |
| depends on (PPC_POWERNV || PPC_PSERIES) && PCI |
| default y |
| |
| config PPC_MPC106 |
| bool |
| |
| config PPC_970_NAP |
| bool |
| |
| config PPC_P7_NAP |
| bool |
| |
| config PPC_BOOK3S_IDLE |
| def_bool y |
| depends on (PPC_970_NAP || PPC_P7_NAP) |
| |
| config PPC_INDIRECT_PIO |
| bool |
| select GENERIC_IOMAP |
| |
| config PPC_INDIRECT_MMIO |
| bool |
| |
| config PPC_IO_WORKAROUNDS |
| bool |
| |
| source "drivers/cpufreq/Kconfig" |
| |
| menu "CPUIdle driver" |
| |
| source "drivers/cpuidle/Kconfig" |
| |
| endmenu |
| |
| config TAU |
| bool "On-chip CPU temperature sensor support" |
| depends on PPC_BOOK3S_32 |
| help |
| G3 and G4 processors have an on-chip temperature sensor called the |
| 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die |
| temperature within 2-4 degrees Celsius. This option shows the current |
| on-die temperature in /proc/cpuinfo if the cpu supports it. |
| |
| Unfortunately, this sensor is very inaccurate when uncalibrated, so |
| don't assume the cpu temp is actually what /proc/cpuinfo says it is. |
| |
| config TAU_INT |
| bool "Interrupt driven TAU driver (EXPERIMENTAL)" |
| depends on TAU |
| help |
| The TAU supports an interrupt driven mode which causes an interrupt |
| whenever the temperature goes out of range. This is the fastest way |
| to get notified the temp has exceeded a range. With this option off, |
| a timer is used to re-check the temperature periodically. |
| |
| If in doubt, say N here. |
| |
| config TAU_AVERAGE |
| bool "Average high and low temp" |
| depends on TAU |
| help |
| The TAU hardware can compare the temperature to an upper and lower |
| bound. The default behavior is to show both the upper and lower |
| bound in /proc/cpuinfo. If the range is large, the temperature is |
| either changing a lot, or the TAU hardware is broken (likely on some |
| G4's). If the range is small (around 4 degrees), the temperature is |
| relatively stable. If you say Y here, a single temperature value, |
| halfway between the upper and lower bounds, will be reported in |
| /proc/cpuinfo. |
| |
| If in doubt, say N here. |
| |
| config QE_GPIO |
| bool "QE GPIO support" |
| depends on QUICC_ENGINE |
| select GPIOLIB |
| help |
| Say Y here if you're going to use hardware that connects to the |
| QE GPIOs. |
| |
| config CPM2 |
| bool "Enable support for the CPM2 (Communications Processor Module)" |
| depends on (FSL_SOC_BOOKE && PPC32) || 8260 |
| select CPM |
| select HAVE_PCI |
| select GPIOLIB |
| help |
| The CPM2 (Communications Processor Module) is a coprocessor on |
| embedded CPUs made by Freescale. Selecting this option means that |
| you wish to build a kernel for a machine with a CPM2 coprocessor |
| on it (826x, 827x, 8560). |
| |
| config FSL_ULI1575 |
| bool |
| select GENERIC_ISA_DMA |
| help |
| Supports for the ULI1575 PCIe south bridge that exists on some |
| Freescale reference boards. The boards all use the ULI in pretty |
| much the same way. |
| |
| config CPM |
| bool |
| select GENERIC_ALLOCATOR |
| |
| config OF_RTC |
| bool |
| help |
| Uses information from the OF or flattened device tree to instantiate |
| platform devices for direct mapped RTC chips like the DS1742 or DS1743. |
| |
| config GEN_RTC |
| bool "Use the platform RTC operations from user space" |
| select RTC_CLASS |
| select RTC_DRV_GENERIC |
| help |
| This option provides backwards compatibility with the old gen_rtc.ko |
| module that was traditionally used for old PowerPC machines. |
| Platforms should migrate to enabling the RTC_DRV_GENERIC by hand |
| replacing their get_rtc_time/set_rtc_time callbacks with |
| a proper RTC device driver. |
| |
| config MCU_MPC8349EMITX |
| bool "MPC8349E-mITX MCU driver" |
| depends on I2C=y && PPC_83xx |
| select GPIOLIB |
| help |
| Say Y here to enable soft power-off functionality on the Freescale |
| boards with the MPC8349E-mITX-compatible MCU chips. This driver will |
| also register MCU GPIOs with the generic GPIO API, so you'll able |
| to use MCU pins as GPIOs. |
| |
| endmenu |
