| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # Makefile for the Linux network (wan) device drivers. |
| # |
| # 3 Aug 2000, Christoph Hellwig <hch@infradead.org> |
| # Rewritten to use lists instead of if-statements. |
| # |
| |
| obj-$(CONFIG_HDLC) += hdlc.o |
| obj-$(CONFIG_HDLC_RAW) += hdlc_raw.o |
| obj-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o |
| obj-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o |
| obj-$(CONFIG_HDLC_FR) += hdlc_fr.o |
| obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o |
| obj-$(CONFIG_HDLC_X25) += hdlc_x25.o |
| |
| obj-$(CONFIG_HOSTESS_SV11) += z85230.o hostess_sv11.o |
| obj-$(CONFIG_SEALEVEL_4021) += z85230.o sealevel.o |
| obj-$(CONFIG_COSA) += cosa.o |
| obj-$(CONFIG_FARSYNC) += farsync.o |
| obj-$(CONFIG_X25_ASY) += x25_asy.o |
| |
| obj-$(CONFIG_LANMEDIA) += lmc/ |
| |
| obj-$(CONFIG_DLCI) += dlci.o |
| obj-$(CONFIG_SDLA) += sdla.o |
| obj-$(CONFIG_LAPBETHER) += lapbether.o |
| obj-$(CONFIG_SBNI) += sbni.o |
| obj-$(CONFIG_N2) += n2.o |
| obj-$(CONFIG_C101) += c101.o |
| obj-$(CONFIG_WANXL) += wanxl.o |
| obj-$(CONFIG_PCI200SYN) += pci200syn.o |
| obj-$(CONFIG_PC300TOO) += pc300too.o |
| obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o |
| obj-$(CONFIG_FSL_UCC_HDLC) += fsl_ucc_hdlc.o |
| obj-$(CONFIG_SLIC_DS26522) += slic_ds26522.o |
| |
| clean-files := wanxlfw.inc |
| $(obj)/wanxl.o: $(obj)/wanxlfw.inc |
| |
| ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y) |
| ifeq ($(ARCH),m68k) |
| M68KCC = $(CC) |
| M68KLD = $(LD) |
| else |
| M68KCC = $(CROSS_COMPILE_M68K)gcc |
| M68KLD = $(CROSS_COMPILE_M68K)ld |
| endif |
| |
| quiet_cmd_build_wanxlfw = BLDFW $@ |
| cmd_build_wanxlfw = hexdump -ve '"\n" 16/1 "0x%02X,"' $< | \ |
| sed 's/0x ,//g;1s/^/static const u8 firmware[]={/;$$s/,$$/\n};\n/' > $@ |
| |
| $(obj)/wanxlfw.inc: $(obj)/wanxlfw.bin FORCE |
| $(call if_changed,build_wanxlfw) |
| |
| quiet_cmd_m68kld_bin_o = M68KLD $@ |
| cmd_m68kld_bin_o = $(M68KLD) --oformat binary -Ttext 0x1000 $< -o $@ |
| |
| $(obj)/wanxlfw.bin: $(obj)/wanxlfw.o FORCE |
| $(call if_changed,m68kld_bin_o) |
| |
| quiet_cmd_m68kas_o_S = M68KAS $@ |
| cmd_m68kas_o_S = $(M68KCC) -D__ASSEMBLY__ -Wp,-MD,$(depfile) -I$(srctree)/include/uapi -c -o $@ $< |
| |
| $(obj)/wanxlfw.o: $(src)/wanxlfw.S FORCE |
| $(call if_changed_dep,m68kas_o_S) |
| endif |
| targets += wanxlfw.inc wanxlfw.bin wanxlfw.o |