| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dwc3-of-simple.c - OF glue layer for simple integrations |
| * |
| * Copyright (c) 2015 Texas Instruments Incorporated - https://www.ti.com |
| * |
| * Author: Felipe Balbi <balbi@ti.com> |
| * |
| * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov |
| * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC |
| * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/clk.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reset.h> |
| |
| struct dwc3_of_simple { |
| struct device *dev; |
| struct clk_bulk_data *clks; |
| int num_clocks; |
| struct reset_control *resets; |
| bool need_reset; |
| }; |
| |
| static int dwc3_of_simple_probe(struct platform_device *pdev) |
| { |
| struct dwc3_of_simple *simple; |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| |
| int ret; |
| |
| simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); |
| if (!simple) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, simple); |
| simple->dev = dev; |
| |
| /* |
| * Some controllers need to toggle the usb3-otg reset before trying to |
| * initialize the PHY, otherwise the PHY times out. |
| */ |
| if (of_device_is_compatible(np, "rockchip,rk3399-dwc3")) |
| simple->need_reset = true; |
| |
| simple->resets = of_reset_control_array_get(np, false, true, |
| true); |
| if (IS_ERR(simple->resets)) { |
| ret = PTR_ERR(simple->resets); |
| dev_err(dev, "failed to get device resets, err=%d\n", ret); |
| return ret; |
| } |
| |
| ret = reset_control_deassert(simple->resets); |
| if (ret) |
| goto err_resetc_put; |
| |
| ret = clk_bulk_get_all(simple->dev, &simple->clks); |
| if (ret < 0) |
| goto err_resetc_assert; |
| |
| simple->num_clocks = ret; |
| ret = clk_bulk_prepare_enable(simple->num_clocks, simple->clks); |
| if (ret) |
| goto err_resetc_assert; |
| |
| ret = of_platform_populate(np, NULL, NULL, dev); |
| if (ret) |
| goto err_clk_put; |
| |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| return 0; |
| |
| err_clk_put: |
| clk_bulk_disable_unprepare(simple->num_clocks, simple->clks); |
| clk_bulk_put_all(simple->num_clocks, simple->clks); |
| |
| err_resetc_assert: |
| reset_control_assert(simple->resets); |
| |
| err_resetc_put: |
| reset_control_put(simple->resets); |
| return ret; |
| } |
| |
| static void __dwc3_of_simple_teardown(struct dwc3_of_simple *simple) |
| { |
| of_platform_depopulate(simple->dev); |
| |
| clk_bulk_disable_unprepare(simple->num_clocks, simple->clks); |
| clk_bulk_put_all(simple->num_clocks, simple->clks); |
| simple->num_clocks = 0; |
| |
| reset_control_assert(simple->resets); |
| |
| reset_control_put(simple->resets); |
| |
| pm_runtime_disable(simple->dev); |
| pm_runtime_put_noidle(simple->dev); |
| pm_runtime_set_suspended(simple->dev); |
| } |
| |
| static int dwc3_of_simple_remove(struct platform_device *pdev) |
| { |
| struct dwc3_of_simple *simple = platform_get_drvdata(pdev); |
| |
| __dwc3_of_simple_teardown(simple); |
| |
| return 0; |
| } |
| |
| static void dwc3_of_simple_shutdown(struct platform_device *pdev) |
| { |
| struct dwc3_of_simple *simple = platform_get_drvdata(pdev); |
| |
| __dwc3_of_simple_teardown(simple); |
| } |
| |
| static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| |
| clk_bulk_disable(simple->num_clocks, simple->clks); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused dwc3_of_simple_runtime_resume(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| |
| return clk_bulk_enable(simple->num_clocks, simple->clks); |
| } |
| |
| static int __maybe_unused dwc3_of_simple_suspend(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| |
| if (simple->need_reset) |
| reset_control_assert(simple->resets); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused dwc3_of_simple_resume(struct device *dev) |
| { |
| struct dwc3_of_simple *simple = dev_get_drvdata(dev); |
| |
| if (simple->need_reset) |
| reset_control_deassert(simple->resets); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(dwc3_of_simple_suspend, dwc3_of_simple_resume) |
| SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend, |
| dwc3_of_simple_runtime_resume, NULL) |
| }; |
| |
| static const struct of_device_id of_dwc3_simple_match[] = { |
| { .compatible = "rockchip,rk3399-dwc3" }, |
| { .compatible = "xlnx,zynqmp-dwc3" }, |
| { .compatible = "cavium,octeon-7130-usb-uctl" }, |
| { .compatible = "sprd,sc9860-dwc3" }, |
| { .compatible = "allwinner,sun50i-h6-dwc3" }, |
| { .compatible = "hisilicon,hi3670-dwc3" }, |
| { .compatible = "intel,keembay-dwc3" }, |
| { /* Sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); |
| |
| static struct platform_driver dwc3_of_simple_driver = { |
| .probe = dwc3_of_simple_probe, |
| .remove = dwc3_of_simple_remove, |
| .shutdown = dwc3_of_simple_shutdown, |
| .driver = { |
| .name = "dwc3-of-simple", |
| .of_match_table = of_dwc3_simple_match, |
| .pm = &dwc3_of_simple_dev_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(dwc3_of_simple_driver); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer"); |
| MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); |