| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright IBM Corp. 2019 |
| */ |
| #include <linux/pgtable.h> |
| #include <asm/mem_detect.h> |
| #include <asm/cpacf.h> |
| #include <asm/timex.h> |
| #include <asm/sclp.h> |
| #include "compressed/decompressor.h" |
| #include "boot.h" |
| |
| #define PRNG_MODE_TDES 1 |
| #define PRNG_MODE_SHA512 2 |
| #define PRNG_MODE_TRNG 3 |
| |
| struct prno_parm { |
| u32 res; |
| u32 reseed_counter; |
| u64 stream_bytes; |
| u8 V[112]; |
| u8 C[112]; |
| }; |
| |
| struct prng_parm { |
| u8 parm_block[32]; |
| u32 reseed_counter; |
| u64 byte_counter; |
| }; |
| |
| static int check_prng(void) |
| { |
| if (!cpacf_query_func(CPACF_KMC, CPACF_KMC_PRNG)) { |
| sclp_early_printk("KASLR disabled: CPU has no PRNG\n"); |
| return 0; |
| } |
| if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_TRNG)) |
| return PRNG_MODE_TRNG; |
| if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_SHA512_DRNG_GEN)) |
| return PRNG_MODE_SHA512; |
| else |
| return PRNG_MODE_TDES; |
| } |
| |
| static unsigned long get_random(unsigned long limit) |
| { |
| struct prng_parm prng = { |
| /* initial parameter block for tdes mode, copied from libica */ |
| .parm_block = { |
| 0x0F, 0x2B, 0x8E, 0x63, 0x8C, 0x8E, 0xD2, 0x52, |
| 0x64, 0xB7, 0xA0, 0x7B, 0x75, 0x28, 0xB8, 0xF4, |
| 0x75, 0x5F, 0xD2, 0xA6, 0x8D, 0x97, 0x11, 0xFF, |
| 0x49, 0xD8, 0x23, 0xF3, 0x7E, 0x21, 0xEC, 0xA0 |
| }, |
| }; |
| unsigned long seed, random; |
| struct prno_parm prno; |
| __u64 entropy[4]; |
| int mode, i; |
| |
| mode = check_prng(); |
| seed = get_tod_clock_fast(); |
| switch (mode) { |
| case PRNG_MODE_TRNG: |
| cpacf_trng(NULL, 0, (u8 *) &random, sizeof(random)); |
| break; |
| case PRNG_MODE_SHA512: |
| cpacf_prno(CPACF_PRNO_SHA512_DRNG_SEED, &prno, NULL, 0, |
| (u8 *) &seed, sizeof(seed)); |
| cpacf_prno(CPACF_PRNO_SHA512_DRNG_GEN, &prno, (u8 *) &random, |
| sizeof(random), NULL, 0); |
| break; |
| case PRNG_MODE_TDES: |
| /* add entropy */ |
| *(unsigned long *) prng.parm_block ^= seed; |
| for (i = 0; i < 16; i++) { |
| cpacf_kmc(CPACF_KMC_PRNG, prng.parm_block, |
| (u8 *) entropy, (u8 *) entropy, |
| sizeof(entropy)); |
| memcpy(prng.parm_block, entropy, sizeof(entropy)); |
| } |
| random = seed; |
| cpacf_kmc(CPACF_KMC_PRNG, prng.parm_block, (u8 *) &random, |
| (u8 *) &random, sizeof(random)); |
| break; |
| default: |
| random = 0; |
| } |
| return random % limit; |
| } |
| |
| unsigned long get_random_base(unsigned long safe_addr) |
| { |
| unsigned long memory_limit = memory_end_set ? memory_end : 0; |
| unsigned long base, start, end, kernel_size; |
| unsigned long block_sum, offset; |
| unsigned long kasan_needs; |
| int i; |
| |
| if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && INITRD_START && INITRD_SIZE) { |
| if (safe_addr < INITRD_START + INITRD_SIZE) |
| safe_addr = INITRD_START + INITRD_SIZE; |
| } |
| safe_addr = ALIGN(safe_addr, THREAD_SIZE); |
| |
| if ((IS_ENABLED(CONFIG_KASAN))) { |
| /* |
| * Estimate kasan memory requirements, which it will reserve |
| * at the very end of available physical memory. To estimate |
| * that, we take into account that kasan would require |
| * 1/8 of available physical memory (for shadow memory) + |
| * creating page tables for the whole memory + shadow memory |
| * region (1 + 1/8). To keep page tables estimates simple take |
| * the double of combined ptes size. |
| */ |
| memory_limit = get_mem_detect_end(); |
| if (memory_end_set && memory_limit > memory_end) |
| memory_limit = memory_end; |
| |
| /* for shadow memory */ |
| kasan_needs = memory_limit / 8; |
| /* for paging structures */ |
| kasan_needs += (memory_limit + kasan_needs) / PAGE_SIZE / |
| _PAGE_ENTRIES * _PAGE_TABLE_SIZE * 2; |
| memory_limit -= kasan_needs; |
| } |
| |
| kernel_size = vmlinux.image_size + vmlinux.bss_size; |
| block_sum = 0; |
| for_each_mem_detect_block(i, &start, &end) { |
| if (memory_limit) { |
| if (start >= memory_limit) |
| break; |
| if (end > memory_limit) |
| end = memory_limit; |
| } |
| if (end - start < kernel_size) |
| continue; |
| block_sum += end - start - kernel_size; |
| } |
| if (!block_sum) { |
| sclp_early_printk("KASLR disabled: not enough memory\n"); |
| return 0; |
| } |
| |
| base = get_random(block_sum); |
| if (base == 0) |
| return 0; |
| if (base < safe_addr) |
| base = safe_addr; |
| block_sum = offset = 0; |
| for_each_mem_detect_block(i, &start, &end) { |
| if (memory_limit) { |
| if (start >= memory_limit) |
| break; |
| if (end > memory_limit) |
| end = memory_limit; |
| } |
| if (end - start < kernel_size) |
| continue; |
| block_sum += end - start - kernel_size; |
| if (base <= block_sum) { |
| base = start + base - offset; |
| base = ALIGN_DOWN(base, THREAD_SIZE); |
| break; |
| } |
| offset = block_sum; |
| } |
| return base; |
| } |