| * Marvell Armada 370/375/380/XP thermal management |
| |
| Required properties: |
| |
| - compatible: Should be set to one of the following: |
| marvell,armada370-thermal |
| marvell,armada375-thermal |
| marvell,armada375-z1-thermal |
| marvell,armada380-thermal |
| marvell,armadaxp-thermal |
| |
| Note: As the name suggests, "marvell,armada375-z1-thermal" |
| applies for the SoC Z1 stepping only. On such stepping |
| some quirks need to be done and the register offset differs |
| from the one in the A0 stepping. |
| The operating system may auto-detect the SoC stepping and |
| update the compatible and register offsets at runtime. |
| |
| - reg: Device's register space. |
| Two entries are expected, see the examples below. |
| The first one is required for the sensor register; |
| the second one is required for the control register |
| to be used for sensor initialization (a.k.a. calibration). |
| |
| Example: |
| |
| thermal@d0018300 { |
| compatible = "marvell,armada370-thermal"; |
| reg = <0xd0018300 0x4 |
| 0xd0018304 0x4>; |
| status = "okay"; |
| }; |
