| /* |
| * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com> |
| * |
| * Original author: |
| * Ben Collins <bcollins@ubuntu.com> |
| * |
| * Additional work by: |
| * John Brooks <john.brooks@bluecherry.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/videodev2.h> |
| #include <linux/delay.h> |
| #include <linux/sysfs.h> |
| #include <linux/ktime.h> |
| #include <linux/slab.h> |
| |
| #include "solo6x10.h" |
| #include "solo6x10-tw28.h" |
| |
| MODULE_DESCRIPTION("Softlogic 6x10 MPEG4/H.264/G.723 CODEC V4L2/ALSA Driver"); |
| MODULE_AUTHOR("Bluecherry <maintainers@bluecherrydvr.com>"); |
| MODULE_VERSION(SOLO6X10_VERSION); |
| MODULE_LICENSE("GPL"); |
| |
| static unsigned video_nr = -1; |
| module_param(video_nr, uint, 0644); |
| MODULE_PARM_DESC(video_nr, "videoX start number, -1 is autodetect (default)"); |
| |
| static int full_eeprom; /* default is only top 64B */ |
| module_param(full_eeprom, uint, 0644); |
| MODULE_PARM_DESC(full_eeprom, "Allow access to full 128B EEPROM (dangerous)"); |
| |
| |
| static void solo_set_time(struct solo_dev *solo_dev) |
| { |
| struct timespec ts; |
| |
| ktime_get_ts(&ts); |
| |
| solo_reg_write(solo_dev, SOLO_TIMER_SEC, ts.tv_sec); |
| solo_reg_write(solo_dev, SOLO_TIMER_USEC, ts.tv_nsec / NSEC_PER_USEC); |
| } |
| |
| static void solo_timer_sync(struct solo_dev *solo_dev) |
| { |
| u32 sec, usec; |
| struct timespec ts; |
| long diff; |
| |
| if (solo_dev->type != SOLO_DEV_6110) |
| return; |
| |
| if (++solo_dev->time_sync < 60) |
| return; |
| |
| solo_dev->time_sync = 0; |
| |
| sec = solo_reg_read(solo_dev, SOLO_TIMER_SEC); |
| usec = solo_reg_read(solo_dev, SOLO_TIMER_USEC); |
| |
| ktime_get_ts(&ts); |
| |
| diff = (long)ts.tv_sec - (long)sec; |
| diff = (diff * 1000000) |
| + ((long)(ts.tv_nsec / NSEC_PER_USEC) - (long)usec); |
| |
| if (diff > 1000 || diff < -1000) { |
| solo_set_time(solo_dev); |
| } else if (diff) { |
| long usec_lsb = solo_dev->usec_lsb; |
| |
| usec_lsb -= diff / 4; |
| if (usec_lsb < 0) |
| usec_lsb = 0; |
| else if (usec_lsb > 255) |
| usec_lsb = 255; |
| |
| solo_dev->usec_lsb = usec_lsb; |
| solo_reg_write(solo_dev, SOLO_TIMER_USEC_LSB, |
| solo_dev->usec_lsb); |
| } |
| } |
| |
| static irqreturn_t solo_isr(int irq, void *data) |
| { |
| struct solo_dev *solo_dev = data; |
| u32 status; |
| int i; |
| |
| status = solo_reg_read(solo_dev, SOLO_IRQ_STAT); |
| if (!status) |
| return IRQ_NONE; |
| |
| if (status & ~solo_dev->irq_mask) { |
| solo_reg_write(solo_dev, SOLO_IRQ_STAT, |
| status & ~solo_dev->irq_mask); |
| status &= solo_dev->irq_mask; |
| } |
| |
| if (status & SOLO_IRQ_PCI_ERR) |
| solo_p2m_error_isr(solo_dev); |
| |
| for (i = 0; i < SOLO_NR_P2M; i++) |
| if (status & SOLO_IRQ_P2M(i)) |
| solo_p2m_isr(solo_dev, i); |
| |
| if (status & SOLO_IRQ_IIC) |
| solo_i2c_isr(solo_dev); |
| |
| if (status & SOLO_IRQ_VIDEO_IN) { |
| solo_video_in_isr(solo_dev); |
| solo_timer_sync(solo_dev); |
| } |
| |
| if (status & SOLO_IRQ_ENCODER) |
| solo_enc_v4l2_isr(solo_dev); |
| |
| if (status & SOLO_IRQ_G723) |
| solo_g723_isr(solo_dev); |
| |
| /* Clear all interrupts handled */ |
| solo_reg_write(solo_dev, SOLO_IRQ_STAT, status); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void free_solo_dev(struct solo_dev *solo_dev) |
| { |
| struct pci_dev *pdev; |
| |
| if (!solo_dev) |
| return; |
| |
| if (solo_dev->dev.parent) |
| device_unregister(&solo_dev->dev); |
| |
| pdev = solo_dev->pdev; |
| |
| /* If we never initialized the PCI device, then nothing else |
| * below here needs cleanup */ |
| if (!pdev) { |
| kfree(solo_dev); |
| return; |
| } |
| |
| if (solo_dev->reg_base) { |
| /* Bring down the sub-devices first */ |
| solo_g723_exit(solo_dev); |
| solo_enc_v4l2_exit(solo_dev); |
| solo_enc_exit(solo_dev); |
| solo_v4l2_exit(solo_dev); |
| solo_disp_exit(solo_dev); |
| solo_gpio_exit(solo_dev); |
| solo_p2m_exit(solo_dev); |
| solo_i2c_exit(solo_dev); |
| |
| /* Now cleanup the PCI device */ |
| solo_irq_off(solo_dev, ~0); |
| pci_iounmap(pdev, solo_dev->reg_base); |
| if (pdev->irq) |
| free_irq(pdev->irq, solo_dev); |
| } |
| |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| v4l2_device_unregister(&solo_dev->v4l2_dev); |
| pci_set_drvdata(pdev, NULL); |
| |
| kfree(solo_dev); |
| } |
| |
| static ssize_t eeprom_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| unsigned short *p = (unsigned short *)buf; |
| int i; |
| |
| if (count & 0x1) |
| dev_warn(dev, "EEPROM Write not aligned (truncating)\n"); |
| |
| if (!full_eeprom && count > 64) { |
| dev_warn(dev, "EEPROM Write truncated to 64 bytes\n"); |
| count = 64; |
| } else if (full_eeprom && count > 128) { |
| dev_warn(dev, "EEPROM Write truncated to 128 bytes\n"); |
| count = 128; |
| } |
| |
| solo_eeprom_ewen(solo_dev, 1); |
| |
| for (i = full_eeprom ? 0 : 32; i < min((int)(full_eeprom ? 64 : 32), |
| (int)(count / 2)); i++) |
| solo_eeprom_write(solo_dev, i, cpu_to_be16(p[i])); |
| |
| solo_eeprom_ewen(solo_dev, 0); |
| |
| return count; |
| } |
| |
| static ssize_t eeprom_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| unsigned short *p = (unsigned short *)buf; |
| int count = (full_eeprom ? 128 : 64); |
| int i; |
| |
| for (i = (full_eeprom ? 0 : 32); i < (count / 2); i++) |
| p[i] = be16_to_cpu(solo_eeprom_read(solo_dev, i)); |
| |
| return count; |
| } |
| |
| static ssize_t p2m_timeouts_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| |
| return sprintf(buf, "%d\n", solo_dev->p2m_timeouts); |
| } |
| |
| static ssize_t sdram_size_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| |
| return sprintf(buf, "%dMegs\n", solo_dev->sdram_size >> 20); |
| } |
| |
| static ssize_t tw28xx_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| |
| return sprintf(buf, "tw2815[%d] tw2864[%d] tw2865[%d]\n", |
| hweight32(solo_dev->tw2815), |
| hweight32(solo_dev->tw2864), |
| hweight32(solo_dev->tw2865)); |
| } |
| |
| static ssize_t input_map_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| unsigned int val; |
| char *out = buf; |
| |
| val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_0); |
| out += sprintf(out, "Channel 0 => Input %d\n", val & 0x1f); |
| out += sprintf(out, "Channel 1 => Input %d\n", (val >> 5) & 0x1f); |
| out += sprintf(out, "Channel 2 => Input %d\n", (val >> 10) & 0x1f); |
| out += sprintf(out, "Channel 3 => Input %d\n", (val >> 15) & 0x1f); |
| out += sprintf(out, "Channel 4 => Input %d\n", (val >> 20) & 0x1f); |
| out += sprintf(out, "Channel 5 => Input %d\n", (val >> 25) & 0x1f); |
| |
| val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_1); |
| out += sprintf(out, "Channel 6 => Input %d\n", val & 0x1f); |
| out += sprintf(out, "Channel 7 => Input %d\n", (val >> 5) & 0x1f); |
| out += sprintf(out, "Channel 8 => Input %d\n", (val >> 10) & 0x1f); |
| out += sprintf(out, "Channel 9 => Input %d\n", (val >> 15) & 0x1f); |
| out += sprintf(out, "Channel 10 => Input %d\n", (val >> 20) & 0x1f); |
| out += sprintf(out, "Channel 11 => Input %d\n", (val >> 25) & 0x1f); |
| |
| val = solo_reg_read(solo_dev, SOLO_VI_CH_SWITCH_2); |
| out += sprintf(out, "Channel 12 => Input %d\n", val & 0x1f); |
| out += sprintf(out, "Channel 13 => Input %d\n", (val >> 5) & 0x1f); |
| out += sprintf(out, "Channel 14 => Input %d\n", (val >> 10) & 0x1f); |
| out += sprintf(out, "Channel 15 => Input %d\n", (val >> 15) & 0x1f); |
| out += sprintf(out, "Spot Output => Input %d\n", (val >> 20) & 0x1f); |
| |
| return out - buf; |
| } |
| |
| static ssize_t p2m_timeout_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| unsigned long ms; |
| int ret = kstrtoul(buf, 10, &ms); |
| |
| if (ret < 0 || ms > 200) |
| return -EINVAL; |
| solo_dev->p2m_jiffies = msecs_to_jiffies(ms); |
| |
| return count; |
| } |
| |
| static ssize_t p2m_timeout_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| |
| return sprintf(buf, "%ums\n", jiffies_to_msecs(solo_dev->p2m_jiffies)); |
| } |
| |
| static ssize_t intervals_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| char *out = buf; |
| int fps = solo_dev->fps; |
| int i; |
| |
| for (i = 0; i < solo_dev->nr_chans; i++) { |
| out += sprintf(out, "Channel %d: %d/%d (0x%08x)\n", |
| i, solo_dev->v4l2_enc[i]->interval, fps, |
| solo_reg_read(solo_dev, SOLO_CAP_CH_INTV(i))); |
| } |
| |
| return out - buf; |
| } |
| |
| static ssize_t sdram_offsets_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| char *out = buf; |
| |
| out += sprintf(out, "DISP: 0x%08x @ 0x%08x\n", |
| SOLO_DISP_EXT_ADDR, |
| SOLO_DISP_EXT_SIZE); |
| |
| out += sprintf(out, "EOSD: 0x%08x @ 0x%08x (0x%08x * %d)\n", |
| SOLO_EOSD_EXT_ADDR, |
| SOLO_EOSD_EXT_AREA(solo_dev), |
| SOLO_EOSD_EXT_SIZE(solo_dev), |
| SOLO_EOSD_EXT_AREA(solo_dev) / |
| SOLO_EOSD_EXT_SIZE(solo_dev)); |
| |
| out += sprintf(out, "MOTI: 0x%08x @ 0x%08x\n", |
| SOLO_MOTION_EXT_ADDR(solo_dev), |
| SOLO_MOTION_EXT_SIZE); |
| |
| out += sprintf(out, "G723: 0x%08x @ 0x%08x\n", |
| SOLO_G723_EXT_ADDR(solo_dev), |
| SOLO_G723_EXT_SIZE); |
| |
| out += sprintf(out, "CAPT: 0x%08x @ 0x%08x (0x%08x * %d)\n", |
| SOLO_CAP_EXT_ADDR(solo_dev), |
| SOLO_CAP_EXT_SIZE(solo_dev), |
| SOLO_CAP_PAGE_SIZE, |
| SOLO_CAP_EXT_SIZE(solo_dev) / SOLO_CAP_PAGE_SIZE); |
| |
| out += sprintf(out, "EREF: 0x%08x @ 0x%08x (0x%08x * %d)\n", |
| SOLO_EREF_EXT_ADDR(solo_dev), |
| SOLO_EREF_EXT_AREA(solo_dev), |
| SOLO_EREF_EXT_SIZE, |
| SOLO_EREF_EXT_AREA(solo_dev) / SOLO_EREF_EXT_SIZE); |
| |
| out += sprintf(out, "MPEG: 0x%08x @ 0x%08x\n", |
| SOLO_MP4E_EXT_ADDR(solo_dev), |
| SOLO_MP4E_EXT_SIZE(solo_dev)); |
| |
| out += sprintf(out, "JPEG: 0x%08x @ 0x%08x\n", |
| SOLO_JPEG_EXT_ADDR(solo_dev), |
| SOLO_JPEG_EXT_SIZE(solo_dev)); |
| |
| return out - buf; |
| } |
| |
| static ssize_t sdram_show(struct file *file, struct kobject *kobj, |
| struct bin_attribute *a, char *buf, |
| loff_t off, size_t count) |
| { |
| struct device *dev = container_of(kobj, struct device, kobj); |
| struct solo_dev *solo_dev = |
| container_of(dev, struct solo_dev, dev); |
| const int size = solo_dev->sdram_size; |
| |
| if (off >= size) |
| return 0; |
| |
| if (off + count > size) |
| count = size - off; |
| |
| if (solo_p2m_dma(solo_dev, 0, buf, off, count, 0, 0)) |
| return -EIO; |
| |
| return count; |
| } |
| |
| static const struct device_attribute solo_dev_attrs[] = { |
| __ATTR(eeprom, 0640, eeprom_show, eeprom_store), |
| __ATTR(p2m_timeout, 0644, p2m_timeout_show, p2m_timeout_store), |
| __ATTR_RO(p2m_timeouts), |
| __ATTR_RO(sdram_size), |
| __ATTR_RO(tw28xx), |
| __ATTR_RO(input_map), |
| __ATTR_RO(intervals), |
| __ATTR_RO(sdram_offsets), |
| }; |
| |
| static void solo_device_release(struct device *dev) |
| { |
| /* Do nothing */ |
| } |
| |
| static int solo_sysfs_init(struct solo_dev *solo_dev) |
| { |
| struct bin_attribute *sdram_attr = &solo_dev->sdram_attr; |
| struct device *dev = &solo_dev->dev; |
| const char *driver; |
| int i; |
| |
| if (solo_dev->type == SOLO_DEV_6110) |
| driver = "solo6110"; |
| else |
| driver = "solo6010"; |
| |
| dev->release = solo_device_release; |
| dev->parent = &solo_dev->pdev->dev; |
| set_dev_node(dev, dev_to_node(&solo_dev->pdev->dev)); |
| dev_set_name(dev, "%s-%d-%d", driver, solo_dev->vfd->num, |
| solo_dev->nr_chans); |
| |
| if (device_register(dev)) { |
| dev->parent = NULL; |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(solo_dev_attrs); i++) { |
| if (device_create_file(dev, &solo_dev_attrs[i])) { |
| device_unregister(dev); |
| return -ENOMEM; |
| } |
| } |
| |
| sysfs_attr_init(&sdram_attr->attr); |
| sdram_attr->attr.name = "sdram"; |
| sdram_attr->attr.mode = 0440; |
| sdram_attr->read = sdram_show; |
| sdram_attr->size = solo_dev->sdram_size; |
| |
| if (device_create_bin_file(dev, sdram_attr)) { |
| device_unregister(dev); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int solo_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct solo_dev *solo_dev; |
| int ret; |
| u8 chip_id; |
| |
| solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL); |
| if (solo_dev == NULL) |
| return -ENOMEM; |
| |
| if (id->driver_data == SOLO_DEV_6010) |
| dev_info(&pdev->dev, "Probing Softlogic 6010\n"); |
| else |
| dev_info(&pdev->dev, "Probing Softlogic 6110\n"); |
| |
| solo_dev->type = id->driver_data; |
| solo_dev->pdev = pdev; |
| spin_lock_init(&solo_dev->reg_io_lock); |
| ret = v4l2_device_register(&pdev->dev, &solo_dev->v4l2_dev); |
| if (ret) |
| goto fail_probe; |
| |
| /* Only for during init */ |
| solo_dev->p2m_jiffies = msecs_to_jiffies(100); |
| |
| ret = pci_enable_device(pdev); |
| if (ret) |
| goto fail_probe; |
| |
| pci_set_master(pdev); |
| |
| /* RETRY/TRDY Timeout disabled */ |
| pci_write_config_byte(pdev, 0x40, 0x00); |
| pci_write_config_byte(pdev, 0x41, 0x00); |
| |
| ret = pci_request_regions(pdev, SOLO6X10_NAME); |
| if (ret) |
| goto fail_probe; |
| |
| solo_dev->reg_base = pci_ioremap_bar(pdev, 0); |
| if (solo_dev->reg_base == NULL) { |
| ret = -ENOMEM; |
| goto fail_probe; |
| } |
| |
| chip_id = solo_reg_read(solo_dev, SOLO_CHIP_OPTION) & |
| SOLO_CHIP_ID_MASK; |
| switch (chip_id) { |
| case 7: |
| solo_dev->nr_chans = 16; |
| solo_dev->nr_ext = 5; |
| break; |
| case 6: |
| solo_dev->nr_chans = 8; |
| solo_dev->nr_ext = 2; |
| break; |
| default: |
| dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, assuming 4 ch\n", |
| chip_id); |
| case 5: |
| solo_dev->nr_chans = 4; |
| solo_dev->nr_ext = 1; |
| } |
| |
| /* Disable all interrupts to start */ |
| solo_irq_off(solo_dev, ~0); |
| |
| /* Initial global settings */ |
| if (solo_dev->type == SOLO_DEV_6010) { |
| solo_dev->clock_mhz = 108; |
| solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT |
| | SOLO_SYS_CFG_INPUTDIV(25) |
| | SOLO_SYS_CFG_FEEDBACKDIV(solo_dev->clock_mhz * 2 - 2) |
| | SOLO_SYS_CFG_OUTDIV(3); |
| solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config); |
| } else { |
| u32 divq, divf; |
| |
| solo_dev->clock_mhz = 135; |
| |
| if (solo_dev->clock_mhz < 125) { |
| divq = 3; |
| divf = (solo_dev->clock_mhz * 4) / 3 - 1; |
| } else { |
| divq = 2; |
| divf = (solo_dev->clock_mhz * 2) / 3 - 1; |
| } |
| |
| solo_reg_write(solo_dev, SOLO_PLL_CONFIG, |
| (1 << 20) | /* PLL_RANGE */ |
| (8 << 15) | /* PLL_DIVR */ |
| (divq << 12) | |
| (divf << 4) | |
| (1 << 1) /* PLL_FSEN */); |
| |
| solo_dev->sys_config = SOLO_SYS_CFG_SDRAM64BIT; |
| } |
| |
| solo_reg_write(solo_dev, SOLO_SYS_CFG, solo_dev->sys_config); |
| solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM, |
| solo_dev->clock_mhz - 1); |
| |
| /* PLL locking time of 1ms */ |
| mdelay(1); |
| |
| ret = request_irq(pdev->irq, solo_isr, IRQF_SHARED, SOLO6X10_NAME, |
| solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| /* Handle this from the start */ |
| solo_irq_on(solo_dev, SOLO_IRQ_PCI_ERR); |
| |
| ret = solo_i2c_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| /* Setup the DMA engine */ |
| solo_reg_write(solo_dev, SOLO_DMA_CTRL, |
| SOLO_DMA_CTRL_REFRESH_CYCLE(1) | |
| SOLO_DMA_CTRL_SDRAM_SIZE(2) | |
| SOLO_DMA_CTRL_SDRAM_CLK_INVERT | |
| SOLO_DMA_CTRL_READ_CLK_SELECT | |
| SOLO_DMA_CTRL_LATENCY(1)); |
| |
| /* Undocumented crap */ |
| solo_reg_write(solo_dev, SOLO_DMA_CTRL1, |
| solo_dev->type == SOLO_DEV_6010 ? 0x100 : 0x300); |
| |
| if (solo_dev->type != SOLO_DEV_6010) { |
| solo_dev->usec_lsb = 0x3f; |
| solo_set_time(solo_dev); |
| } |
| |
| /* Disable watchdog */ |
| solo_reg_write(solo_dev, SOLO_WATCHDOG, 0); |
| |
| /* Initialize sub components */ |
| |
| ret = solo_p2m_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_disp_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_gpio_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_tw28_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_v4l2_init(solo_dev, video_nr); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_enc_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_enc_v4l2_init(solo_dev, video_nr); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_g723_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| ret = solo_sysfs_init(solo_dev); |
| if (ret) |
| goto fail_probe; |
| |
| /* Now that init is over, set this lower */ |
| solo_dev->p2m_jiffies = msecs_to_jiffies(20); |
| |
| return 0; |
| |
| fail_probe: |
| free_solo_dev(solo_dev); |
| return ret; |
| } |
| |
| static void solo_pci_remove(struct pci_dev *pdev) |
| { |
| struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev); |
| struct solo_dev *solo_dev = container_of(v4l2_dev, struct solo_dev, v4l2_dev); |
| |
| free_solo_dev(solo_dev); |
| } |
| |
| static const struct pci_device_id solo_id_table[] = { |
| /* 6010 based cards */ |
| { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_4), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_9), |
| .driver_data = SOLO_DEV_6010 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_16), |
| .driver_data = SOLO_DEV_6010 }, |
| /* 6110 based cards */ |
| { PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6110), |
| .driver_data = SOLO_DEV_6110 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_4), |
| .driver_data = SOLO_DEV_6110 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_8), |
| .driver_data = SOLO_DEV_6110 }, |
| { PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_16), |
| .driver_data = SOLO_DEV_6110 }, |
| {0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, solo_id_table); |
| |
| static struct pci_driver solo_pci_driver = { |
| .name = SOLO6X10_NAME, |
| .id_table = solo_id_table, |
| .probe = solo_pci_probe, |
| .remove = solo_pci_remove, |
| }; |
| |
| module_pci_driver(solo_pci_driver); |