| /* |
| * xhci-plat.c - xHCI host controller driver platform Bus Glue. |
| * |
| * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com |
| * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * A lot of code borrowed from the Linux xHCI driver. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/usb/xhci_pdriver.h> |
| |
| #include "xhci.h" |
| #include "xhci-mvebu.h" |
| #include "xhci-rcar.h" |
| |
| static struct hc_driver __read_mostly xhci_plat_hc_driver; |
| |
| static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) |
| { |
| /* |
| * As of now platform drivers don't provide MSI support so we ensure |
| * here that the generic code does not try to make a pci_dev from our |
| * dev struct in order to setup MSI |
| */ |
| xhci->quirks |= XHCI_PLAT; |
| } |
| |
| /* called during probe() after chip reset completes */ |
| static int xhci_plat_setup(struct usb_hcd *hcd) |
| { |
| struct device_node *of_node = hcd->self.controller->of_node; |
| int ret; |
| |
| if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") || |
| of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) { |
| ret = xhci_rcar_init_quirk(hcd); |
| if (ret) |
| return ret; |
| } |
| |
| return xhci_gen_setup(hcd, xhci_plat_quirks); |
| } |
| |
| static int xhci_plat_start(struct usb_hcd *hcd) |
| { |
| struct device_node *of_node = hcd->self.controller->of_node; |
| |
| if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") || |
| of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) |
| xhci_rcar_start(hcd); |
| |
| return xhci_run(hcd); |
| } |
| |
| static int xhci_plat_probe(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev); |
| const struct hc_driver *driver; |
| struct xhci_hcd *xhci; |
| struct resource *res; |
| struct usb_hcd *hcd; |
| struct clk *clk; |
| int ret; |
| int irq; |
| |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| driver = &xhci_plat_hc_driver; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return -ENODEV; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENODEV; |
| |
| if (of_device_is_compatible(pdev->dev.of_node, |
| "marvell,armada-375-xhci") || |
| of_device_is_compatible(pdev->dev.of_node, |
| "marvell,armada-380-xhci")) { |
| ret = xhci_mvebu_mbus_init_quirk(pdev); |
| if (ret) |
| return ret; |
| } |
| |
| /* Initialize dma_mask and coherent_dma_mask to 32-bits */ |
| ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| if (!pdev->dev.dma_mask) |
| pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; |
| else |
| dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); |
| |
| hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); |
| if (!hcd) |
| return -ENOMEM; |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| hcd->regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(hcd->regs)) { |
| ret = PTR_ERR(hcd->regs); |
| goto put_hcd; |
| } |
| |
| /* |
| * Not all platforms have a clk so it is not an error if the |
| * clock does not exists. |
| */ |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (!IS_ERR(clk)) { |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| goto put_hcd; |
| } |
| |
| ret = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto disable_clk; |
| |
| device_wakeup_enable(hcd->self.controller); |
| |
| /* USB 2.0 roothub is stored in the platform_device now. */ |
| hcd = platform_get_drvdata(pdev); |
| xhci = hcd_to_xhci(hcd); |
| xhci->clk = clk; |
| xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, |
| dev_name(&pdev->dev), hcd); |
| if (!xhci->shared_hcd) { |
| ret = -ENOMEM; |
| goto dealloc_usb2_hcd; |
| } |
| |
| if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || |
| (pdata && pdata->usb3_lpm_capable)) |
| xhci->quirks |= XHCI_LPM_SUPPORT; |
| /* |
| * Set the xHCI pointer before xhci_plat_setup() (aka hcd_driver.reset) |
| * is called by usb_add_hcd(). |
| */ |
| *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; |
| |
| if (HCC_MAX_PSA(xhci->hcc_params) >= 4) |
| xhci->shared_hcd->can_do_streams = 1; |
| |
| ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); |
| if (ret) |
| goto put_usb3_hcd; |
| |
| return 0; |
| |
| put_usb3_hcd: |
| usb_put_hcd(xhci->shared_hcd); |
| |
| dealloc_usb2_hcd: |
| usb_remove_hcd(hcd); |
| |
| disable_clk: |
| if (!IS_ERR(clk)) |
| clk_disable_unprepare(clk); |
| |
| put_hcd: |
| usb_put_hcd(hcd); |
| |
| return ret; |
| } |
| |
| static int xhci_plat_remove(struct platform_device *dev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| struct clk *clk = xhci->clk; |
| |
| usb_remove_hcd(xhci->shared_hcd); |
| usb_put_hcd(xhci->shared_hcd); |
| |
| usb_remove_hcd(hcd); |
| if (!IS_ERR(clk)) |
| clk_disable_unprepare(clk); |
| usb_put_hcd(hcd); |
| kfree(xhci); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int xhci_plat_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| |
| return xhci_suspend(xhci); |
| } |
| |
| static int xhci_plat_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct xhci_hcd *xhci = hcd_to_xhci(hcd); |
| |
| return xhci_resume(xhci, 0); |
| } |
| |
| static const struct dev_pm_ops xhci_plat_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume) |
| }; |
| #define DEV_PM_OPS (&xhci_plat_pm_ops) |
| #else |
| #define DEV_PM_OPS NULL |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id usb_xhci_of_match[] = { |
| { .compatible = "generic-xhci" }, |
| { .compatible = "xhci-platform" }, |
| { .compatible = "marvell,armada-375-xhci"}, |
| { .compatible = "marvell,armada-380-xhci"}, |
| { .compatible = "renesas,xhci-r8a7790"}, |
| { .compatible = "renesas,xhci-r8a7791"}, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, usb_xhci_of_match); |
| #endif |
| |
| static struct platform_driver usb_xhci_driver = { |
| .probe = xhci_plat_probe, |
| .remove = xhci_plat_remove, |
| .driver = { |
| .name = "xhci-hcd", |
| .pm = DEV_PM_OPS, |
| .of_match_table = of_match_ptr(usb_xhci_of_match), |
| }, |
| }; |
| MODULE_ALIAS("platform:xhci-hcd"); |
| |
| static int __init xhci_plat_init(void) |
| { |
| xhci_init_driver(&xhci_plat_hc_driver, xhci_plat_setup); |
| xhci_plat_hc_driver.start = xhci_plat_start; |
| return platform_driver_register(&usb_xhci_driver); |
| } |
| module_init(xhci_plat_init); |
| |
| static void __exit xhci_plat_exit(void) |
| { |
| platform_driver_unregister(&usb_xhci_driver); |
| } |
| module_exit(xhci_plat_exit); |
| |
| MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); |
| MODULE_LICENSE("GPL"); |