| What: /sys/class/leds/<led>/device_name |
| Date: Dec 2017 |
| KernelVersion: 4.16 |
| Contact: linux-leds@vger.kernel.org |
| Description: |
| Specifies the network device name to monitor. |
| |
| What: /sys/class/leds/<led>/interval |
| Date: Dec 2017 |
| KernelVersion: 4.16 |
| Contact: linux-leds@vger.kernel.org |
| Description: |
| Specifies the duration of the LED blink in milliseconds. |
| Defaults to 50 ms. |
| |
| What: /sys/class/leds/<led>/link |
| Date: Dec 2017 |
| KernelVersion: 4.16 |
| Contact: linux-leds@vger.kernel.org |
| Description: |
| Signal the link state of the named network device. |
| If set to 0 (default), the LED's normal state is off. |
| If set to 1, the LED's normal state reflects the link state |
| of the named network device. |
| Setting this value also immediately changes the LED state. |
| |
| What: /sys/class/leds/<led>/tx |
| Date: Dec 2017 |
| KernelVersion: 4.16 |
| Contact: linux-leds@vger.kernel.org |
| Description: |
| Signal transmission of data on the named network device. |
| If set to 0 (default), the LED will not blink on transmission. |
| If set to 1, the LED will blink for the milliseconds specified |
| in interval to signal transmission. |
| |
| What: /sys/class/leds/<led>/rx |
| Date: Dec 2017 |
| KernelVersion: 4.16 |
| Contact: linux-leds@vger.kernel.org |
| Description: |
| Signal reception of data on the named network device. |
| If set to 0 (default), the LED will not blink on reception. |
| If set to 1, the LED will blink for the milliseconds specified |
| in interval to signal reception. |
