Documentation/core-api/errseq.rst - linux - Git at Google

 =====================
 The errseq_t datatype
 =====================

 An errseq_t is a way of recording errors in one place, and allowing any
 number of "subscribers" to tell whether it has changed since a previous
 point where it was sampled.

 The initial use case for this is tracking errors for file
 synchronization syscalls (fsync, fdatasync, msync and sync_file_range),
 but it may be usable in other situations.

 It's implemented as an unsigned 32-bit value.  The low order bits are
 designated to hold an error code (between 1 and MAX_ERRNO).  The upper bits
 are used as a counter.  This is done with atomics instead of locking so that
 these functions can be called from any context.

 Note that there is a risk of collisions if new errors are being recorded
 frequently, since we have so few bits to use as a counter.

 To mitigate this, the bit between the error value and counter is used as
 a flag to tell whether the value has been sampled since a new value was
 recorded.  That allows us to avoid bumping the counter if no one has
 sampled it since the last time an error was recorded.

 Thus we end up with a value that looks something like this:

 +--------------------------------------+----+------------------------+
 | 31..13                               | 12 | 11..0                  |
 +--------------------------------------+----+------------------------+
 | counter                              | SF | errno                  |
 +--------------------------------------+----+------------------------+

 The general idea is for "watchers" to sample an errseq_t value and keep
 it as a running cursor.  That value can later be used to tell whether
 any new errors have occurred since that sampling was done, and atomically
 record the state at the time that it was checked.  This allows us to
 record errors in one place, and then have a number of "watchers" that
 can tell whether the value has changed since they last checked it.

 A new errseq_t should always be zeroed out.  An errseq_t value of all zeroes
 is the special (but common) case where there has never been an error. An all
 zero value thus serves as the "epoch" if one wishes to know whether there
 has ever been an error set since it was first initialized.

 API usage
 =========

 Let me tell you a story about a worker drone.  Now, he's a good worker
 overall, but the company is a little...management heavy.  He has to
 report to 77 supervisors today, and tomorrow the "big boss" is coming in
 from out of town and he's sure to test the poor fellow too.

 They're all handing him work to do -- so much he can't keep track of who
 handed him what, but that's not really a big problem.  The supervisors
 just want to know when he's finished all of the work they've handed him so
 far and whether he made any mistakes since they last asked.

 He might have made the mistake on work they didn't actually hand him,
 but he can't keep track of things at that level of detail, all he can
 remember is the most recent mistake that he made.

 Here's our worker_drone representation::

         struct worker_drone {
                 errseq_t        wd_err; /* for recording errors */
         };

 Every day, the worker_drone starts out with a blank slate::

         struct worker_drone wd;

         wd.wd_err = (errseq_t)0;

 The supervisors come in and get an initial read for the day.  They
 don't care about anything that happened before their watch begins::

         struct supervisor {
                 errseq_t        s_wd_err; /* private "cursor" for wd_err */
                 spinlock_t      s_wd_err_lock; /* protects s_wd_err */
         }

         struct supervisor       su;

         su.s_wd_err = errseq_sample(&wd.wd_err);
         spin_lock_init(&su.s_wd_err_lock);

 Now they start handing him tasks to do.  Every few minutes they ask him to
 finish up all of the work they've handed him so far.  Then they ask him
 whether he made any mistakes on any of it::

         spin_lock(&su.su_wd_err_lock);
         err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
         spin_unlock(&su.su_wd_err_lock);

 Up to this point, that just keeps returning 0.

 Now, the owners of this company are quite miserly and have given him
 substandard equipment with which to do his job. Occasionally it
 glitches and he makes a mistake.  He sighs a heavy sigh, and marks it
 down::

         errseq_set(&wd.wd_err, -EIO);

 ...and then gets back to work.  The supervisors eventually poll again
 and they each get the error when they next check.  Subsequent calls will
 return 0, until another error is recorded, at which point it's reported
 to each of them once.

 Note that the supervisors can't tell how many mistakes he made, only
 whether one was made since they last checked, and the latest value
 recorded.

 Occasionally the big boss comes in for a spot check and asks the worker
 to do a one-off job for him. He's not really watching the worker
 full-time like the supervisors, but he does need to know whether a
 mistake occurred while his job was processing.

 He can just sample the current errseq_t in the worker, and then use that
 to tell whether an error has occurred later::

         errseq_t since = errseq_sample(&wd.wd_err);
         /* submit some work and wait for it to complete */
         err = errseq_check(&wd.wd_err, since);

 Since he's just going to discard "since" after that point, he doesn't
 need to advance it here. He also doesn't need any locking since it's
 not usable by anyone else.

 Serializing errseq_t cursor updates
 ===================================

 Note that the errseq_t API does not protect the errseq_t cursor during a
 check_and_advance_operation. Only the canonical error code is handled
 atomically.  In a situation where more than one task might be using the
 same errseq_t cursor at the same time, it's important to serialize
 updates to that cursor.

 If that's not done, then it's possible for the cursor to go backward
 in which case the same error could be reported more than once.

 Because of this, it's often advantageous to first do an errseq_check to
 see if anything has changed, and only later do an
 errseq_check_and_advance after taking the lock. e.g.::

         if (errseq_check(&wd.wd_err, READ_ONCE(su.s_wd_err)) {
                 /* su.s_wd_err is protected by s_wd_err_lock */
                 spin_lock(&su.s_wd_err_lock);
                 err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
                 spin_unlock(&su.s_wd_err_lock);
         }

 That avoids the spinlock in the common case where nothing has changed
 since the last time it was checked.

 Functions
 =========

 .. kernel-doc:: lib/errseq.c
	=====================
	The errseq_t datatype
	=====================

	An errseq_t is a way of recording errors in one place, and allowing any
	number of "subscribers" to tell whether it has changed since a previous
	point where it was sampled.

	The initial use case for this is tracking errors for file
	synchronization syscalls (fsync, fdatasync, msync and sync_file_range),
	but it may be usable in other situations.

	It's implemented as an unsigned 32-bit value. The low order bits are
	designated to hold an error code (between 1 and MAX_ERRNO). The upper bits
	are used as a counter. This is done with atomics instead of locking so that
	these functions can be called from any context.

	Note that there is a risk of collisions if new errors are being recorded
	frequently, since we have so few bits to use as a counter.

	To mitigate this, the bit between the error value and counter is used as
	a flag to tell whether the value has been sampled since a new value was
	recorded. That allows us to avoid bumping the counter if no one has
	sampled it since the last time an error was recorded.

	Thus we end up with a value that looks something like this:

	+--------------------------------------+----+------------------------+
	\| 31..13 \| 12 \| 11..0 \|
	+--------------------------------------+----+------------------------+
	\| counter \| SF \| errno \|
	+--------------------------------------+----+------------------------+

	The general idea is for "watchers" to sample an errseq_t value and keep
	it as a running cursor. That value can later be used to tell whether
	any new errors have occurred since that sampling was done, and atomically
	record the state at the time that it was checked. This allows us to
	record errors in one place, and then have a number of "watchers" that
	can tell whether the value has changed since they last checked it.

	A new errseq_t should always be zeroed out. An errseq_t value of all zeroes
	is the special (but common) case where there has never been an error. An all
	zero value thus serves as the "epoch" if one wishes to know whether there
	has ever been an error set since it was first initialized.

	API usage
	=========

	Let me tell you a story about a worker drone. Now, he's a good worker
	overall, but the company is a little...management heavy. He has to
	report to 77 supervisors today, and tomorrow the "big boss" is coming in
	from out of town and he's sure to test the poor fellow too.

	They're all handing him work to do -- so much he can't keep track of who
	handed him what, but that's not really a big problem. The supervisors
	just want to know when he's finished all of the work they've handed him so
	far and whether he made any mistakes since they last asked.

	He might have made the mistake on work they didn't actually hand him,
	but he can't keep track of things at that level of detail, all he can
	remember is the most recent mistake that he made.

	Here's our worker_drone representation::

	struct worker_drone {
	errseq_t wd_err; /* for recording errors */
	};

	Every day, the worker_drone starts out with a blank slate::

	struct worker_drone wd;

	wd.wd_err = (errseq_t)0;

	The supervisors come in and get an initial read for the day. They
	don't care about anything that happened before their watch begins::

	struct supervisor {
	errseq_t s_wd_err; /* private "cursor" for wd_err */
	spinlock_t s_wd_err_lock; /* protects s_wd_err */
	}

	struct supervisor su;

	su.s_wd_err = errseq_sample(&wd.wd_err);
	spin_lock_init(&su.s_wd_err_lock);

	Now they start handing him tasks to do. Every few minutes they ask him to
	finish up all of the work they've handed him so far. Then they ask him
	whether he made any mistakes on any of it::

	spin_lock(&su.su_wd_err_lock);
	err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
	spin_unlock(&su.su_wd_err_lock);

	Up to this point, that just keeps returning 0.

	Now, the owners of this company are quite miserly and have given him
	substandard equipment with which to do his job. Occasionally it
	glitches and he makes a mistake. He sighs a heavy sigh, and marks it
	down::

	errseq_set(&wd.wd_err, -EIO);

	...and then gets back to work. The supervisors eventually poll again
	and they each get the error when they next check. Subsequent calls will
	return 0, until another error is recorded, at which point it's reported
	to each of them once.

	Note that the supervisors can't tell how many mistakes he made, only
	whether one was made since they last checked, and the latest value
	recorded.

	Occasionally the big boss comes in for a spot check and asks the worker
	to do a one-off job for him. He's not really watching the worker
	full-time like the supervisors, but he does need to know whether a
	mistake occurred while his job was processing.

	He can just sample the current errseq_t in the worker, and then use that
	to tell whether an error has occurred later::

	errseq_t since = errseq_sample(&wd.wd_err);
	/* submit some work and wait for it to complete */
	err = errseq_check(&wd.wd_err, since);

	Since he's just going to discard "since" after that point, he doesn't
	need to advance it here. He also doesn't need any locking since it's
	not usable by anyone else.

	Serializing errseq_t cursor updates
	===================================

	Note that the errseq_t API does not protect the errseq_t cursor during a
	check_and_advance_operation. Only the canonical error code is handled
	atomically. In a situation where more than one task might be using the
	same errseq_t cursor at the same time, it's important to serialize
	updates to that cursor.

	If that's not done, then it's possible for the cursor to go backward
	in which case the same error could be reported more than once.

	Because of this, it's often advantageous to first do an errseq_check to
	see if anything has changed, and only later do an
	errseq_check_and_advance after taking the lock. e.g.::

	if (errseq_check(&wd.wd_err, READ_ONCE(su.s_wd_err)) {
	/* su.s_wd_err is protected by s_wd_err_lock */
	spin_lock(&su.s_wd_err_lock);
	err = errseq_check_and_advance(&wd.wd_err, &su.s_wd_err);
	spin_unlock(&su.s_wd_err_lock);
	}

	That avoids the spinlock in the common case where nothing has changed
	since the last time it was checked.

	Functions
	=========

	.. kernel-doc:: lib/errseq.c