| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014 Intel Corporation |
| * |
| * Authors: |
| * Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> |
| * |
| * Maintained by: <tpmdd-devel@lists.sourceforge.net> |
| * |
| * This device driver implements the TPM interface as defined in |
| * the TCG CRB 2.0 TPM specification. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/highmem.h> |
| #include <linux/rculist.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #ifdef CONFIG_ARM64 |
| #include <linux/arm-smccc.h> |
| #endif |
| #include "tpm.h" |
| |
| #define ACPI_SIG_TPM2 "TPM2" |
| |
| static const guid_t crb_acpi_start_guid = |
| GUID_INIT(0x6BBF6CAB, 0x5463, 0x4714, |
| 0xB7, 0xCD, 0xF0, 0x20, 0x3C, 0x03, 0x68, 0xD4); |
| |
| enum crb_defaults { |
| CRB_ACPI_START_REVISION_ID = 1, |
| CRB_ACPI_START_INDEX = 1, |
| }; |
| |
| enum crb_loc_ctrl { |
| CRB_LOC_CTRL_REQUEST_ACCESS = BIT(0), |
| CRB_LOC_CTRL_RELINQUISH = BIT(1), |
| }; |
| |
| enum crb_loc_state { |
| CRB_LOC_STATE_LOC_ASSIGNED = BIT(1), |
| CRB_LOC_STATE_TPM_REG_VALID_STS = BIT(7), |
| }; |
| |
| enum crb_ctrl_req { |
| CRB_CTRL_REQ_CMD_READY = BIT(0), |
| CRB_CTRL_REQ_GO_IDLE = BIT(1), |
| }; |
| |
| enum crb_ctrl_sts { |
| CRB_CTRL_STS_ERROR = BIT(0), |
| CRB_CTRL_STS_TPM_IDLE = BIT(1), |
| }; |
| |
| enum crb_start { |
| CRB_START_INVOKE = BIT(0), |
| }; |
| |
| enum crb_cancel { |
| CRB_CANCEL_INVOKE = BIT(0), |
| }; |
| |
| struct crb_regs_head { |
| u32 loc_state; |
| u32 reserved1; |
| u32 loc_ctrl; |
| u32 loc_sts; |
| u8 reserved2[32]; |
| u64 intf_id; |
| u64 ctrl_ext; |
| } __packed; |
| |
| struct crb_regs_tail { |
| u32 ctrl_req; |
| u32 ctrl_sts; |
| u32 ctrl_cancel; |
| u32 ctrl_start; |
| u32 ctrl_int_enable; |
| u32 ctrl_int_sts; |
| u32 ctrl_cmd_size; |
| u32 ctrl_cmd_pa_low; |
| u32 ctrl_cmd_pa_high; |
| u32 ctrl_rsp_size; |
| u64 ctrl_rsp_pa; |
| } __packed; |
| |
| enum crb_status { |
| CRB_DRV_STS_COMPLETE = BIT(0), |
| }; |
| |
| struct crb_priv { |
| u32 sm; |
| const char *hid; |
| void __iomem *iobase; |
| struct crb_regs_head __iomem *regs_h; |
| struct crb_regs_tail __iomem *regs_t; |
| u8 __iomem *cmd; |
| u8 __iomem *rsp; |
| u32 cmd_size; |
| u32 smc_func_id; |
| }; |
| |
| struct tpm2_crb_smc { |
| u32 interrupt; |
| u8 interrupt_flags; |
| u8 op_flags; |
| u16 reserved2; |
| u32 smc_func_id; |
| }; |
| |
| static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value, |
| unsigned long timeout) |
| { |
| ktime_t start; |
| ktime_t stop; |
| |
| start = ktime_get(); |
| stop = ktime_add(start, ms_to_ktime(timeout)); |
| |
| do { |
| if ((ioread32(reg) & mask) == value) |
| return true; |
| |
| usleep_range(50, 100); |
| } while (ktime_before(ktime_get(), stop)); |
| |
| return ((ioread32(reg) & mask) == value); |
| } |
| |
| /** |
| * __crb_go_idle - request tpm crb device to go the idle state |
| * |
| * @dev: crb device |
| * @priv: crb private data |
| * |
| * Write CRB_CTRL_REQ_GO_IDLE to TPM_CRB_CTRL_REQ |
| * The device should respond within TIMEOUT_C by clearing the bit. |
| * Anyhow, we do not wait here as a consequent CMD_READY request |
| * will be handled correctly even if idle was not completed. |
| * |
| * The function does nothing for devices with ACPI-start method |
| * or SMC-start method. |
| * |
| * Return: 0 always |
| */ |
| static int __crb_go_idle(struct device *dev, struct crb_priv *priv) |
| { |
| if ((priv->sm == ACPI_TPM2_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC)) |
| return 0; |
| |
| iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req); |
| |
| if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req, |
| CRB_CTRL_REQ_GO_IDLE/* mask */, |
| 0, /* value */ |
| TPM2_TIMEOUT_C)) { |
| dev_warn(dev, "goIdle timed out\n"); |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int crb_go_idle(struct tpm_chip *chip) |
| { |
| struct device *dev = &chip->dev; |
| struct crb_priv *priv = dev_get_drvdata(dev); |
| |
| return __crb_go_idle(dev, priv); |
| } |
| |
| /** |
| * __crb_cmd_ready - request tpm crb device to enter ready state |
| * |
| * @dev: crb device |
| * @priv: crb private data |
| * |
| * Write CRB_CTRL_REQ_CMD_READY to TPM_CRB_CTRL_REQ |
| * and poll till the device acknowledge it by clearing the bit. |
| * The device should respond within TIMEOUT_C. |
| * |
| * The function does nothing for devices with ACPI-start method |
| * or SMC-start method. |
| * |
| * Return: 0 on success -ETIME on timeout; |
| */ |
| static int __crb_cmd_ready(struct device *dev, struct crb_priv *priv) |
| { |
| if ((priv->sm == ACPI_TPM2_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC)) |
| return 0; |
| |
| iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req); |
| if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req, |
| CRB_CTRL_REQ_CMD_READY /* mask */, |
| 0, /* value */ |
| TPM2_TIMEOUT_C)) { |
| dev_warn(dev, "cmdReady timed out\n"); |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int crb_cmd_ready(struct tpm_chip *chip) |
| { |
| struct device *dev = &chip->dev; |
| struct crb_priv *priv = dev_get_drvdata(dev); |
| |
| return __crb_cmd_ready(dev, priv); |
| } |
| |
| static int __crb_request_locality(struct device *dev, |
| struct crb_priv *priv, int loc) |
| { |
| u32 value = CRB_LOC_STATE_LOC_ASSIGNED | |
| CRB_LOC_STATE_TPM_REG_VALID_STS; |
| |
| if (!priv->regs_h) |
| return 0; |
| |
| iowrite32(CRB_LOC_CTRL_REQUEST_ACCESS, &priv->regs_h->loc_ctrl); |
| if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, value, value, |
| TPM2_TIMEOUT_C)) { |
| dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n"); |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int crb_request_locality(struct tpm_chip *chip, int loc) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| |
| return __crb_request_locality(&chip->dev, priv, loc); |
| } |
| |
| static int __crb_relinquish_locality(struct device *dev, |
| struct crb_priv *priv, int loc) |
| { |
| u32 mask = CRB_LOC_STATE_LOC_ASSIGNED | |
| CRB_LOC_STATE_TPM_REG_VALID_STS; |
| u32 value = CRB_LOC_STATE_TPM_REG_VALID_STS; |
| |
| if (!priv->regs_h) |
| return 0; |
| |
| iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl); |
| if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, mask, value, |
| TPM2_TIMEOUT_C)) { |
| dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n"); |
| return -ETIME; |
| } |
| |
| return 0; |
| } |
| |
| static int crb_relinquish_locality(struct tpm_chip *chip, int loc) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| |
| return __crb_relinquish_locality(&chip->dev, priv, loc); |
| } |
| |
| static u8 crb_status(struct tpm_chip *chip) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| u8 sts = 0; |
| |
| if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) != |
| CRB_START_INVOKE) |
| sts |= CRB_DRV_STS_COMPLETE; |
| |
| return sts; |
| } |
| |
| static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| unsigned int expected; |
| |
| /* A sanity check that the upper layer wants to get at least the header |
| * as that is the minimum size for any TPM response. |
| */ |
| if (count < TPM_HEADER_SIZE) |
| return -EIO; |
| |
| /* If this bit is set, according to the spec, the TPM is in |
| * unrecoverable condition. |
| */ |
| if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR) |
| return -EIO; |
| |
| /* Read the first 8 bytes in order to get the length of the response. |
| * We read exactly a quad word in order to make sure that the remaining |
| * reads will be aligned. |
| */ |
| memcpy_fromio(buf, priv->rsp, 8); |
| |
| expected = be32_to_cpup((__be32 *)&buf[2]); |
| if (expected > count || expected < TPM_HEADER_SIZE) |
| return -EIO; |
| |
| memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8); |
| |
| return expected; |
| } |
| |
| static int crb_do_acpi_start(struct tpm_chip *chip) |
| { |
| union acpi_object *obj; |
| int rc; |
| |
| obj = acpi_evaluate_dsm(chip->acpi_dev_handle, |
| &crb_acpi_start_guid, |
| CRB_ACPI_START_REVISION_ID, |
| CRB_ACPI_START_INDEX, |
| NULL); |
| if (!obj) |
| return -ENXIO; |
| rc = obj->integer.value == 0 ? 0 : -ENXIO; |
| ACPI_FREE(obj); |
| return rc; |
| } |
| |
| #ifdef CONFIG_ARM64 |
| /* |
| * This is a TPM Command Response Buffer start method that invokes a |
| * Secure Monitor Call to requrest the firmware to execute or cancel |
| * a TPM 2.0 command. |
| */ |
| static int tpm_crb_smc_start(struct device *dev, unsigned long func_id) |
| { |
| struct arm_smccc_res res; |
| |
| arm_smccc_smc(func_id, 0, 0, 0, 0, 0, 0, 0, &res); |
| if (res.a0 != 0) { |
| dev_err(dev, |
| FW_BUG "tpm_crb_smc_start() returns res.a0 = 0x%lx\n", |
| res.a0); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| #else |
| static int tpm_crb_smc_start(struct device *dev, unsigned long func_id) |
| { |
| dev_err(dev, FW_BUG "tpm_crb: incorrect start method\n"); |
| return -EINVAL; |
| } |
| #endif |
| |
| static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| int rc = 0; |
| |
| /* Zero the cancel register so that the next command will not get |
| * canceled. |
| */ |
| iowrite32(0, &priv->regs_t->ctrl_cancel); |
| |
| if (len > priv->cmd_size) { |
| dev_err(&chip->dev, "invalid command count value %zd %d\n", |
| len, priv->cmd_size); |
| return -E2BIG; |
| } |
| |
| memcpy_toio(priv->cmd, buf, len); |
| |
| /* Make sure that cmd is populated before issuing start. */ |
| wmb(); |
| |
| /* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs |
| * report only ACPI start but in practice seems to require both |
| * CRB start, hence invoking CRB start method if hid == MSFT0101. |
| */ |
| if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) || |
| (priv->sm == ACPI_TPM2_MEMORY_MAPPED) || |
| (!strcmp(priv->hid, "MSFT0101"))) |
| iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start); |
| |
| if ((priv->sm == ACPI_TPM2_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) |
| rc = crb_do_acpi_start(chip); |
| |
| if (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) { |
| iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start); |
| rc = tpm_crb_smc_start(&chip->dev, priv->smc_func_id); |
| } |
| |
| return rc; |
| } |
| |
| static void crb_cancel(struct tpm_chip *chip) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| |
| iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel); |
| |
| if (((priv->sm == ACPI_TPM2_START_METHOD) || |
| (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) && |
| crb_do_acpi_start(chip)) |
| dev_err(&chip->dev, "ACPI Start failed\n"); |
| } |
| |
| static bool crb_req_canceled(struct tpm_chip *chip, u8 status) |
| { |
| struct crb_priv *priv = dev_get_drvdata(&chip->dev); |
| u32 cancel = ioread32(&priv->regs_t->ctrl_cancel); |
| |
| return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE; |
| } |
| |
| static const struct tpm_class_ops tpm_crb = { |
| .flags = TPM_OPS_AUTO_STARTUP, |
| .status = crb_status, |
| .recv = crb_recv, |
| .send = crb_send, |
| .cancel = crb_cancel, |
| .req_canceled = crb_req_canceled, |
| .go_idle = crb_go_idle, |
| .cmd_ready = crb_cmd_ready, |
| .request_locality = crb_request_locality, |
| .relinquish_locality = crb_relinquish_locality, |
| .req_complete_mask = CRB_DRV_STS_COMPLETE, |
| .req_complete_val = CRB_DRV_STS_COMPLETE, |
| }; |
| |
| static int crb_check_resource(struct acpi_resource *ares, void *data) |
| { |
| struct resource *io_res = data; |
| struct resource_win win; |
| struct resource *res = &(win.res); |
| |
| if (acpi_dev_resource_memory(ares, res) || |
| acpi_dev_resource_address_space(ares, &win)) { |
| *io_res = *res; |
| io_res->name = NULL; |
| } |
| |
| return 1; |
| } |
| |
| static void __iomem *crb_map_res(struct device *dev, struct crb_priv *priv, |
| struct resource *io_res, u64 start, u32 size) |
| { |
| struct resource new_res = { |
| .start = start, |
| .end = start + size - 1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| /* Detect a 64 bit address on a 32 bit system */ |
| if (start != new_res.start) |
| return (void __iomem *) ERR_PTR(-EINVAL); |
| |
| if (!resource_contains(io_res, &new_res)) |
| return devm_ioremap_resource(dev, &new_res); |
| |
| return priv->iobase + (new_res.start - io_res->start); |
| } |
| |
| /* |
| * Work around broken BIOSs that return inconsistent values from the ACPI |
| * region vs the registers. Trust the ACPI region. Such broken systems |
| * probably cannot send large TPM commands since the buffer will be truncated. |
| */ |
| static u64 crb_fixup_cmd_size(struct device *dev, struct resource *io_res, |
| u64 start, u64 size) |
| { |
| if (io_res->start > start || io_res->end < start) |
| return size; |
| |
| if (start + size - 1 <= io_res->end) |
| return size; |
| |
| dev_err(dev, |
| FW_BUG "ACPI region does not cover the entire command/response buffer. %pr vs %llx %llx\n", |
| io_res, start, size); |
| |
| return io_res->end - start + 1; |
| } |
| |
| static int crb_map_io(struct acpi_device *device, struct crb_priv *priv, |
| struct acpi_table_tpm2 *buf) |
| { |
| struct list_head resources; |
| struct resource io_res; |
| struct device *dev = &device->dev; |
| u32 pa_high, pa_low; |
| u64 cmd_pa; |
| u32 cmd_size; |
| __le64 __rsp_pa; |
| u64 rsp_pa; |
| u32 rsp_size; |
| int ret; |
| |
| INIT_LIST_HEAD(&resources); |
| ret = acpi_dev_get_resources(device, &resources, crb_check_resource, |
| &io_res); |
| if (ret < 0) |
| return ret; |
| acpi_dev_free_resource_list(&resources); |
| |
| if (resource_type(&io_res) != IORESOURCE_MEM) { |
| dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n"); |
| return -EINVAL; |
| } |
| |
| priv->iobase = devm_ioremap_resource(dev, &io_res); |
| if (IS_ERR(priv->iobase)) |
| return PTR_ERR(priv->iobase); |
| |
| /* The ACPI IO region starts at the head area and continues to include |
| * the control area, as one nice sane region except for some older |
| * stuff that puts the control area outside the ACPI IO region. |
| */ |
| if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) || |
| (priv->sm == ACPI_TPM2_MEMORY_MAPPED)) { |
| if (buf->control_address == io_res.start + |
| sizeof(*priv->regs_h)) |
| priv->regs_h = priv->iobase; |
| else |
| dev_warn(dev, FW_BUG "Bad ACPI memory layout"); |
| } |
| |
| ret = __crb_request_locality(dev, priv, 0); |
| if (ret) |
| return ret; |
| |
| priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address, |
| sizeof(struct crb_regs_tail)); |
| if (IS_ERR(priv->regs_t)) { |
| ret = PTR_ERR(priv->regs_t); |
| goto out_relinquish_locality; |
| } |
| |
| /* |
| * PTT HW bug w/a: wake up the device to access |
| * possibly not retained registers. |
| */ |
| ret = __crb_cmd_ready(dev, priv); |
| if (ret) |
| goto out_relinquish_locality; |
| |
| pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high); |
| pa_low = ioread32(&priv->regs_t->ctrl_cmd_pa_low); |
| cmd_pa = ((u64)pa_high << 32) | pa_low; |
| cmd_size = crb_fixup_cmd_size(dev, &io_res, cmd_pa, |
| ioread32(&priv->regs_t->ctrl_cmd_size)); |
| |
| dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n", |
| pa_high, pa_low, cmd_size); |
| |
| priv->cmd = crb_map_res(dev, priv, &io_res, cmd_pa, cmd_size); |
| if (IS_ERR(priv->cmd)) { |
| ret = PTR_ERR(priv->cmd); |
| goto out; |
| } |
| |
| memcpy_fromio(&__rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8); |
| rsp_pa = le64_to_cpu(__rsp_pa); |
| rsp_size = crb_fixup_cmd_size(dev, &io_res, rsp_pa, |
| ioread32(&priv->regs_t->ctrl_rsp_size)); |
| |
| if (cmd_pa != rsp_pa) { |
| priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size); |
| ret = PTR_ERR_OR_ZERO(priv->rsp); |
| goto out; |
| } |
| |
| /* According to the PTP specification, overlapping command and response |
| * buffer sizes must be identical. |
| */ |
| if (cmd_size != rsp_size) { |
| dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| priv->rsp = priv->cmd; |
| |
| out: |
| if (!ret) |
| priv->cmd_size = cmd_size; |
| |
| __crb_go_idle(dev, priv); |
| |
| out_relinquish_locality: |
| |
| __crb_relinquish_locality(dev, priv, 0); |
| |
| return ret; |
| } |
| |
| static int crb_acpi_add(struct acpi_device *device) |
| { |
| struct acpi_table_tpm2 *buf; |
| struct crb_priv *priv; |
| struct tpm_chip *chip; |
| struct device *dev = &device->dev; |
| struct tpm2_crb_smc *crb_smc; |
| acpi_status status; |
| u32 sm; |
| int rc; |
| |
| status = acpi_get_table(ACPI_SIG_TPM2, 1, |
| (struct acpi_table_header **) &buf); |
| if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) { |
| dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n"); |
| return -EINVAL; |
| } |
| |
| /* Should the FIFO driver handle this? */ |
| sm = buf->start_method; |
| if (sm == ACPI_TPM2_MEMORY_MAPPED) |
| return -ENODEV; |
| |
| priv = devm_kzalloc(dev, sizeof(struct crb_priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) { |
| if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) { |
| dev_err(dev, |
| FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n", |
| buf->header.length, |
| ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC); |
| return -EINVAL; |
| } |
| crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf)); |
| priv->smc_func_id = crb_smc->smc_func_id; |
| } |
| |
| priv->sm = sm; |
| priv->hid = acpi_device_hid(device); |
| |
| rc = crb_map_io(device, priv, buf); |
| if (rc) |
| return rc; |
| |
| chip = tpmm_chip_alloc(dev, &tpm_crb); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| |
| dev_set_drvdata(&chip->dev, priv); |
| chip->acpi_dev_handle = device->handle; |
| chip->flags = TPM_CHIP_FLAG_TPM2; |
| |
| return tpm_chip_register(chip); |
| } |
| |
| static int crb_acpi_remove(struct acpi_device *device) |
| { |
| struct device *dev = &device->dev; |
| struct tpm_chip *chip = dev_get_drvdata(dev); |
| |
| tpm_chip_unregister(chip); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops crb_pm = { |
| SET_SYSTEM_SLEEP_PM_OPS(tpm_pm_suspend, tpm_pm_resume) |
| }; |
| |
| static const struct acpi_device_id crb_device_ids[] = { |
| {"MSFT0101", 0}, |
| {"", 0}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, crb_device_ids); |
| |
| static struct acpi_driver crb_acpi_driver = { |
| .name = "tpm_crb", |
| .ids = crb_device_ids, |
| .ops = { |
| .add = crb_acpi_add, |
| .remove = crb_acpi_remove, |
| }, |
| .drv = { |
| .pm = &crb_pm, |
| }, |
| }; |
| |
| module_acpi_driver(crb_acpi_driver); |
| MODULE_AUTHOR("Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>"); |
| MODULE_DESCRIPTION("TPM2 Driver"); |
| MODULE_VERSION("0.1"); |
| MODULE_LICENSE("GPL"); |