| /* |
| * Clocksource driver for NXP LPC32xx/18xx/43xx timer |
| * |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * Based on: |
| * time-efm32 Copyright (C) 2013 Pengutronix |
| * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| * |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/clk.h> |
| #include <linux/clockchips.h> |
| #include <linux/clocksource.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/sched_clock.h> |
| |
| #define LPC32XX_TIMER_IR 0x000 |
| #define LPC32XX_TIMER_IR_MR0INT BIT(0) |
| #define LPC32XX_TIMER_TCR 0x004 |
| #define LPC32XX_TIMER_TCR_CEN BIT(0) |
| #define LPC32XX_TIMER_TCR_CRST BIT(1) |
| #define LPC32XX_TIMER_TC 0x008 |
| #define LPC32XX_TIMER_PR 0x00c |
| #define LPC32XX_TIMER_MCR 0x014 |
| #define LPC32XX_TIMER_MCR_MR0I BIT(0) |
| #define LPC32XX_TIMER_MCR_MR0R BIT(1) |
| #define LPC32XX_TIMER_MCR_MR0S BIT(2) |
| #define LPC32XX_TIMER_MR0 0x018 |
| #define LPC32XX_TIMER_CTCR 0x070 |
| |
| struct lpc32xx_clock_event_ddata { |
| struct clock_event_device evtdev; |
| void __iomem *base; |
| u32 ticks_per_jiffy; |
| }; |
| |
| /* Needed for the sched clock */ |
| static void __iomem *clocksource_timer_counter; |
| |
| static u64 notrace lpc32xx_read_sched_clock(void) |
| { |
| return readl(clocksource_timer_counter); |
| } |
| |
| static unsigned long lpc32xx_delay_timer_read(void) |
| { |
| return readl(clocksource_timer_counter); |
| } |
| |
| static struct delay_timer lpc32xx_delay_timer = { |
| .read_current_timer = lpc32xx_delay_timer_read, |
| }; |
| |
| static int lpc32xx_clkevt_next_event(unsigned long delta, |
| struct clock_event_device *evtdev) |
| { |
| struct lpc32xx_clock_event_ddata *ddata = |
| container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); |
| |
| /* |
| * Place timer in reset and program the delta in the match |
| * channel 0 (MR0). When the timer counter matches the value |
| * in MR0 register the match will trigger an interrupt. |
| * After setup the timer is released from reset and enabled. |
| */ |
| writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR); |
| writel_relaxed(delta, ddata->base + LPC32XX_TIMER_MR0); |
| writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR); |
| |
| return 0; |
| } |
| |
| static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev) |
| { |
| struct lpc32xx_clock_event_ddata *ddata = |
| container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); |
| |
| /* Disable the timer */ |
| writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR); |
| |
| return 0; |
| } |
| |
| static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev) |
| { |
| struct lpc32xx_clock_event_ddata *ddata = |
| container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); |
| |
| /* |
| * When using oneshot, we must also disable the timer |
| * to wait for the first call to set_next_event(). |
| */ |
| writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR); |
| |
| /* Enable interrupt, reset on match and stop on match (MCR). */ |
| writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R | |
| LPC32XX_TIMER_MCR_MR0S, ddata->base + LPC32XX_TIMER_MCR); |
| return 0; |
| } |
| |
| static int lpc32xx_clkevt_periodic(struct clock_event_device *evtdev) |
| { |
| struct lpc32xx_clock_event_ddata *ddata = |
| container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev); |
| |
| /* Enable interrupt and reset on match. */ |
| writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R, |
| ddata->base + LPC32XX_TIMER_MCR); |
| |
| /* |
| * Place timer in reset and program the delta in the match |
| * channel 0 (MR0). |
| */ |
| writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR); |
| writel_relaxed(ddata->ticks_per_jiffy, ddata->base + LPC32XX_TIMER_MR0); |
| writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR); |
| |
| return 0; |
| } |
| |
| static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id) |
| { |
| struct lpc32xx_clock_event_ddata *ddata = dev_id; |
| |
| /* Clear match on channel 0 */ |
| writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR); |
| |
| ddata->evtdev.event_handler(&ddata->evtdev); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = { |
| .evtdev = { |
| .name = "lpc3220 clockevent", |
| .features = CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_PERIODIC, |
| .rating = 300, |
| .set_next_event = lpc32xx_clkevt_next_event, |
| .set_state_shutdown = lpc32xx_clkevt_shutdown, |
| .set_state_oneshot = lpc32xx_clkevt_oneshot, |
| .set_state_periodic = lpc32xx_clkevt_periodic, |
| }, |
| }; |
| |
| static int __init lpc32xx_clocksource_init(struct device_node *np) |
| { |
| void __iomem *base; |
| unsigned long rate; |
| struct clk *clk; |
| int ret; |
| |
| clk = of_clk_get_by_name(np, "timerclk"); |
| if (IS_ERR(clk)) { |
| pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| pr_err("clock enable failed (%d)\n", ret); |
| goto err_clk_enable; |
| } |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_err("unable to map registers\n"); |
| ret = -EADDRNOTAVAIL; |
| goto err_iomap; |
| } |
| |
| /* |
| * Disable and reset timer then set it to free running timer |
| * mode (CTCR) with no prescaler (PR) or match operations (MCR). |
| * After setup the timer is released from reset and enabled. |
| */ |
| writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR); |
| writel_relaxed(0, base + LPC32XX_TIMER_PR); |
| writel_relaxed(0, base + LPC32XX_TIMER_MCR); |
| writel_relaxed(0, base + LPC32XX_TIMER_CTCR); |
| writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR); |
| |
| rate = clk_get_rate(clk); |
| ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer", |
| rate, 300, 32, clocksource_mmio_readl_up); |
| if (ret) { |
| pr_err("failed to init clocksource (%d)\n", ret); |
| goto err_clocksource_init; |
| } |
| |
| clocksource_timer_counter = base + LPC32XX_TIMER_TC; |
| lpc32xx_delay_timer.freq = rate; |
| register_current_timer_delay(&lpc32xx_delay_timer); |
| sched_clock_register(lpc32xx_read_sched_clock, 32, rate); |
| |
| return 0; |
| |
| err_clocksource_init: |
| iounmap(base); |
| err_iomap: |
| clk_disable_unprepare(clk); |
| err_clk_enable: |
| clk_put(clk); |
| return ret; |
| } |
| |
| static int __init lpc32xx_clockevent_init(struct device_node *np) |
| { |
| void __iomem *base; |
| unsigned long rate; |
| struct clk *clk; |
| int ret, irq; |
| |
| clk = of_clk_get_by_name(np, "timerclk"); |
| if (IS_ERR(clk)) { |
| pr_err("clock get failed (%ld)\n", PTR_ERR(clk)); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) { |
| pr_err("clock enable failed (%d)\n", ret); |
| goto err_clk_enable; |
| } |
| |
| base = of_iomap(np, 0); |
| if (!base) { |
| pr_err("unable to map registers\n"); |
| ret = -EADDRNOTAVAIL; |
| goto err_iomap; |
| } |
| |
| irq = irq_of_parse_and_map(np, 0); |
| if (!irq) { |
| pr_err("get irq failed\n"); |
| ret = -ENOENT; |
| goto err_irq; |
| } |
| |
| /* |
| * Disable timer and clear any pending interrupt (IR) on match |
| * channel 0 (MR0). Clear the prescaler as it's not used. |
| */ |
| writel_relaxed(0, base + LPC32XX_TIMER_TCR); |
| writel_relaxed(0, base + LPC32XX_TIMER_PR); |
| writel_relaxed(0, base + LPC32XX_TIMER_CTCR); |
| writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR); |
| |
| rate = clk_get_rate(clk); |
| lpc32xx_clk_event_ddata.base = base; |
| lpc32xx_clk_event_ddata.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ); |
| clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev, |
| rate, 1, -1); |
| |
| ret = request_irq(irq, lpc32xx_clock_event_handler, |
| IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent", |
| &lpc32xx_clk_event_ddata); |
| if (ret) { |
| pr_err("request irq failed\n"); |
| goto err_irq; |
| } |
| |
| return 0; |
| |
| err_irq: |
| iounmap(base); |
| err_iomap: |
| clk_disable_unprepare(clk); |
| err_clk_enable: |
| clk_put(clk); |
| return ret; |
| } |
| |
| /* |
| * This function asserts that we have exactly one clocksource and one |
| * clock_event_device in the end. |
| */ |
| static int __init lpc32xx_timer_init(struct device_node *np) |
| { |
| static int has_clocksource, has_clockevent; |
| int ret = 0; |
| |
| if (!has_clocksource) { |
| ret = lpc32xx_clocksource_init(np); |
| if (!ret) { |
| has_clocksource = 1; |
| return 0; |
| } |
| } |
| |
| if (!has_clockevent) { |
| ret = lpc32xx_clockevent_init(np); |
| if (!ret) { |
| has_clockevent = 1; |
| return 0; |
| } |
| } |
| |
| return ret; |
| } |
| TIMER_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init); |