| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Parse the EFI PCDP table to locate the console device. |
| * |
| * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P. |
| * Khalid Aziz <khalid.aziz@hp.com> |
| * Alex Williamson <alex.williamson@hp.com> |
| * Bjorn Helgaas <bjorn.helgaas@hp.com> |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/console.h> |
| #include <linux/efi.h> |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #include <asm/vga.h> |
| #include "pcdp.h" |
| |
| static int __init |
| setup_serial_console(struct pcdp_uart *uart) |
| { |
| #ifdef CONFIG_SERIAL_8250_CONSOLE |
| int mmio; |
| static char options[64], *p = options; |
| char parity; |
| |
| mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY); |
| p += sprintf(p, "uart8250,%s,0x%llx", |
| mmio ? "mmio" : "io", uart->addr.address); |
| if (uart->baud) { |
| p += sprintf(p, ",%llu", uart->baud); |
| if (uart->bits) { |
| switch (uart->parity) { |
| case 0x2: parity = 'e'; break; |
| case 0x3: parity = 'o'; break; |
| default: parity = 'n'; |
| } |
| p += sprintf(p, "%c%d", parity, uart->bits); |
| } |
| } |
| |
| add_preferred_console("uart", 8250, &options[9]); |
| return setup_earlycon(options); |
| #else |
| return -ENODEV; |
| #endif |
| } |
| |
| static int __init |
| setup_vga_console(struct pcdp_device *dev) |
| { |
| #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) |
| u8 *if_ptr; |
| |
| if_ptr = ((u8 *)dev + sizeof(struct pcdp_device)); |
| if (if_ptr[0] == PCDP_IF_PCI) { |
| struct pcdp_if_pci if_pci; |
| |
| /* struct copy since ifptr might not be correctly aligned */ |
| |
| memcpy(&if_pci, if_ptr, sizeof(if_pci)); |
| |
| if (if_pci.trans & PCDP_PCI_TRANS_IOPORT) |
| vga_console_iobase = if_pci.ioport_tra; |
| |
| if (if_pci.trans & PCDP_PCI_TRANS_MMIO) |
| vga_console_membase = if_pci.mmio_tra; |
| } |
| |
| if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) { |
| printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n"); |
| return -ENODEV; |
| } |
| |
| conswitchp = &vga_con; |
| printk(KERN_INFO "PCDP: VGA console\n"); |
| return 0; |
| #else |
| return -ENODEV; |
| #endif |
| } |
| |
| int __init |
| efi_setup_pcdp_console(char *cmdline) |
| { |
| struct pcdp *pcdp; |
| struct pcdp_uart *uart; |
| struct pcdp_device *dev, *end; |
| int i, serial = 0; |
| int rc = -ENODEV; |
| |
| if (efi.hcdp == EFI_INVALID_TABLE_ADDR) |
| return -ENODEV; |
| |
| pcdp = early_memremap(efi.hcdp, 4096); |
| printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, efi.hcdp); |
| |
| if (strstr(cmdline, "console=hcdp")) { |
| if (pcdp->rev < 3) |
| serial = 1; |
| } else if (strstr(cmdline, "console=")) { |
| printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n"); |
| goto out; |
| } |
| |
| if (pcdp->rev < 3 && efi_uart_console_only()) |
| serial = 1; |
| |
| for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) { |
| if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) { |
| if (uart->type == PCDP_CONSOLE_UART) { |
| rc = setup_serial_console(uart); |
| goto out; |
| } |
| } |
| } |
| |
| end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length); |
| for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts); |
| dev < end; |
| dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) { |
| if (dev->flags & PCDP_PRIMARY_CONSOLE) { |
| if (dev->type == PCDP_CONSOLE_VGA) { |
| rc = setup_vga_console(dev); |
| goto out; |
| } |
| } |
| } |
| |
| out: |
| early_memunmap(pcdp, 4096); |
| return rc; |
| } |