| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LED driver for WM8350 driven LEDS. |
| * |
| * Copyright(C) 2007, 2008 Wolfson Microelectronics PLC. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/err.h> |
| #include <linux/mfd/wm8350/pmic.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| |
| /* Microamps */ |
| static const int isink_cur[] = { |
| 4, |
| 5, |
| 6, |
| 7, |
| 8, |
| 10, |
| 11, |
| 14, |
| 16, |
| 19, |
| 23, |
| 27, |
| 32, |
| 39, |
| 46, |
| 54, |
| 65, |
| 77, |
| 92, |
| 109, |
| 130, |
| 154, |
| 183, |
| 218, |
| 259, |
| 308, |
| 367, |
| 436, |
| 518, |
| 616, |
| 733, |
| 872, |
| 1037, |
| 1233, |
| 1466, |
| 1744, |
| 2073, |
| 2466, |
| 2933, |
| 3487, |
| 4147, |
| 4932, |
| 5865, |
| 6975, |
| 8294, |
| 9864, |
| 11730, |
| 13949, |
| 16589, |
| 19728, |
| 23460, |
| 27899, |
| 33178, |
| 39455, |
| 46920, |
| 55798, |
| 66355, |
| 78910, |
| 93840, |
| 111596, |
| 132710, |
| 157820, |
| 187681, |
| 223191 |
| }; |
| |
| #define to_wm8350_led(led_cdev) \ |
| container_of(led_cdev, struct wm8350_led, cdev) |
| |
| static int wm8350_led_enable(struct wm8350_led *led) |
| { |
| int ret = 0; |
| |
| if (led->enabled) |
| return ret; |
| |
| ret = regulator_enable(led->isink); |
| if (ret != 0) { |
| dev_err(led->cdev.dev, "Failed to enable ISINK: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_enable(led->dcdc); |
| if (ret != 0) { |
| dev_err(led->cdev.dev, "Failed to enable DCDC: %d\n", ret); |
| regulator_disable(led->isink); |
| return ret; |
| } |
| |
| led->enabled = 1; |
| |
| return ret; |
| } |
| |
| static int wm8350_led_disable(struct wm8350_led *led) |
| { |
| int ret = 0; |
| |
| if (!led->enabled) |
| return ret; |
| |
| ret = regulator_disable(led->dcdc); |
| if (ret != 0) { |
| dev_err(led->cdev.dev, "Failed to disable DCDC: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_disable(led->isink); |
| if (ret != 0) { |
| dev_err(led->cdev.dev, "Failed to disable ISINK: %d\n", ret); |
| ret = regulator_enable(led->dcdc); |
| if (ret != 0) |
| dev_err(led->cdev.dev, "Failed to reenable DCDC: %d\n", |
| ret); |
| return ret; |
| } |
| |
| led->enabled = 0; |
| |
| return ret; |
| } |
| |
| static int wm8350_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct wm8350_led *led = to_wm8350_led(led_cdev); |
| unsigned long flags; |
| int ret; |
| int uA; |
| |
| led->value = value; |
| |
| spin_lock_irqsave(&led->value_lock, flags); |
| |
| if (led->value == LED_OFF) { |
| spin_unlock_irqrestore(&led->value_lock, flags); |
| return wm8350_led_disable(led); |
| } |
| |
| /* This scales linearly into the index of valid current |
| * settings which results in a linear scaling of perceived |
| * brightness due to the non-linear current settings provided |
| * by the hardware. |
| */ |
| uA = (led->max_uA_index * led->value) / LED_FULL; |
| spin_unlock_irqrestore(&led->value_lock, flags); |
| BUG_ON(uA >= ARRAY_SIZE(isink_cur)); |
| |
| ret = regulator_set_current_limit(led->isink, isink_cur[uA], |
| isink_cur[uA]); |
| if (ret != 0) { |
| dev_err(led->cdev.dev, "Failed to set %duA: %d\n", |
| isink_cur[uA], ret); |
| return ret; |
| } |
| |
| return wm8350_led_enable(led); |
| } |
| |
| static void wm8350_led_shutdown(struct platform_device *pdev) |
| { |
| struct wm8350_led *led = platform_get_drvdata(pdev); |
| |
| led->value = LED_OFF; |
| wm8350_led_disable(led); |
| } |
| |
| static int wm8350_led_probe(struct platform_device *pdev) |
| { |
| struct regulator *isink, *dcdc; |
| struct wm8350_led *led; |
| struct wm8350_led_platform_data *pdata = dev_get_platdata(&pdev->dev); |
| int i; |
| |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "no platform data\n"); |
| return -ENODEV; |
| } |
| |
| if (pdata->max_uA < isink_cur[0]) { |
| dev_err(&pdev->dev, "Invalid maximum current %duA\n", |
| pdata->max_uA); |
| return -EINVAL; |
| } |
| |
| isink = devm_regulator_get(&pdev->dev, "led_isink"); |
| if (IS_ERR(isink)) { |
| dev_err(&pdev->dev, "%s: can't get ISINK\n", __func__); |
| return PTR_ERR(isink); |
| } |
| |
| dcdc = devm_regulator_get(&pdev->dev, "led_vcc"); |
| if (IS_ERR(dcdc)) { |
| dev_err(&pdev->dev, "%s: can't get DCDC\n", __func__); |
| return PTR_ERR(dcdc); |
| } |
| |
| led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); |
| if (led == NULL) |
| return -ENOMEM; |
| |
| led->cdev.brightness_set_blocking = wm8350_led_set; |
| led->cdev.default_trigger = pdata->default_trigger; |
| led->cdev.name = pdata->name; |
| led->cdev.flags |= LED_CORE_SUSPENDRESUME; |
| led->enabled = regulator_is_enabled(isink); |
| led->isink = isink; |
| led->dcdc = dcdc; |
| |
| for (i = 0; i < ARRAY_SIZE(isink_cur) - 1; i++) |
| if (isink_cur[i] >= pdata->max_uA) |
| break; |
| led->max_uA_index = i; |
| if (pdata->max_uA != isink_cur[i]) |
| dev_warn(&pdev->dev, |
| "Maximum current %duA is not directly supported," |
| " check platform data\n", |
| pdata->max_uA); |
| |
| spin_lock_init(&led->value_lock); |
| led->value = LED_OFF; |
| platform_set_drvdata(pdev, led); |
| |
| return led_classdev_register(&pdev->dev, &led->cdev); |
| } |
| |
| static int wm8350_led_remove(struct platform_device *pdev) |
| { |
| struct wm8350_led *led = platform_get_drvdata(pdev); |
| |
| led_classdev_unregister(&led->cdev); |
| wm8350_led_disable(led); |
| return 0; |
| } |
| |
| static struct platform_driver wm8350_led_driver = { |
| .driver = { |
| .name = "wm8350-led", |
| }, |
| .probe = wm8350_led_probe, |
| .remove = wm8350_led_remove, |
| .shutdown = wm8350_led_shutdown, |
| }; |
| |
| module_platform_driver(wm8350_led_driver); |
| |
| MODULE_AUTHOR("Mark Brown"); |
| MODULE_DESCRIPTION("WM8350 LED driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:wm8350-led"); |