drivers/mmc/host/sdhci-pci-o2micro.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2013 BayHub Technology Ltd.
  *
  * Authors: Peter Guo <peter.guo@bayhubtech.com>
  *          Adam Lee <adam.lee@canonical.com>
  *          Ernest Zhang <ernest.zhang@bayhubtech.com>
  */

 #include <linux/pci.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/delay.h>

 #include "sdhci.h"
 #include "sdhci-pci.h"

 /*
  * O2Micro device registers
  */

 #define O2_SD_MISC_REG5		0x64
 #define O2_SD_LD0_CTRL		0x68
 #define O2_SD_DEV_CTRL		0x88
 #define O2_SD_LOCK_WP		0xD3
 #define O2_SD_TEST_REG		0xD4
 #define O2_SD_FUNC_REG0		0xDC
 #define O2_SD_MULTI_VCC3V	0xEE
 #define O2_SD_CLKREQ		0xEC
 #define O2_SD_CAPS		0xE0
 #define O2_SD_ADMA1		0xE2
 #define O2_SD_ADMA2		0xE7
 #define O2_SD_INF_MOD		0xF1
 #define O2_SD_MISC_CTRL4	0xFC
 #define O2_SD_TUNING_CTRL	0x300
 #define O2_SD_PLL_SETTING	0x304
 #define O2_SD_MISC_SETTING	0x308
 #define O2_SD_CLK_SETTING	0x328
 #define O2_SD_CAP_REG2		0x330
 #define O2_SD_CAP_REG0		0x334
 #define O2_SD_UHS1_CAP_SETTING	0x33C
 #define O2_SD_DELAY_CTRL	0x350
 #define O2_SD_UHS2_L1_CTRL	0x35C
 #define O2_SD_FUNC_REG3		0x3E0
 #define O2_SD_FUNC_REG4		0x3E4
 #define O2_SD_LED_ENABLE	BIT(6)
 #define O2_SD_FREG0_LEDOFF	BIT(13)
 #define O2_SD_FREG4_ENABLE_CLK_SET	BIT(22)

 #define O2_SD_VENDOR_SETTING	0x110
 #define O2_SD_VENDOR_SETTING2	0x1C8
 #define O2_SD_HW_TUNING_DISABLE	BIT(4)

 #define O2_PLL_WDT_CONTROL1	0x1CC
 #define  O2_PLL_FORCE_ACTIVE	BIT(18)
 #define  O2_PLL_LOCK_STATUS	BIT(14)
 #define  O2_PLL_SOFT_RESET	BIT(12)

 #define O2_SD_DETECT_SETTING 0x324

 static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
 {
 	u16 reg;

 	/* enable hardware tuning */
 	reg = sdhci_readw(host, O2_SD_VENDOR_SETTING);
 	reg &= ~O2_SD_HW_TUNING_DISABLE;
 	sdhci_writew(host, reg, O2_SD_VENDOR_SETTING);
 }

 static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
 {
 	int i;

 	sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200);

 	for (i = 0; i < 150; i++) {
 		u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);

 		if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
 			if (ctrl & SDHCI_CTRL_TUNED_CLK) {
 				host->tuning_done = true;
 				return;
 			}
 			pr_warn("%s: HW tuning failed !\n",
 				mmc_hostname(host->mmc));
 			break;
 		}

 		mdelay(1);
 	}

 	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
 		mmc_hostname(host->mmc));
 	sdhci_reset_tuning(host);
 }

 static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
 	int current_bus_width = 0;

 	/*
 	 * This handler only implements the eMMC tuning that is specific to
 	 * this controller.  Fall back to the standard method for other TIMING.
 	 */
 	if (host->timing != MMC_TIMING_MMC_HS200)
 		return sdhci_execute_tuning(mmc, opcode);

 	if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200))
 		return -EINVAL;

 	/*
 	 * o2 sdhci host didn't support 8bit emmc tuning
 	 */
 	if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
 		current_bus_width = mmc->ios.bus_width;
 		mmc->ios.bus_width = MMC_BUS_WIDTH_4;
 		sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
 	}

 	sdhci_o2_set_tuning_mode(host);

 	sdhci_start_tuning(host);

 	__sdhci_o2_execute_tuning(host, opcode);

 	sdhci_end_tuning(host);

 	if (current_bus_width == MMC_BUS_WIDTH_8) {
 		mmc->ios.bus_width = MMC_BUS_WIDTH_8;
 		sdhci_set_bus_width(host, current_bus_width);
 	}

 	host->flags &= ~SDHCI_HS400_TUNING;
 	return 0;
 }

 static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
 {
 	u32 scratch_32;
 	pci_read_config_dword(chip->pdev,
 			      O2_SD_PLL_SETTING, &scratch_32);

 	scratch_32 &= 0x0000FFFF;
 	scratch_32 |= value;

 	pci_write_config_dword(chip->pdev,
 			       O2_SD_PLL_SETTING, scratch_32);
 }

 static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
 {
 	int ret;
 	u32 scratch_32;

 	/* Set led of SD host function enable */
 	ret = pci_read_config_dword(chip->pdev,
 				    O2_SD_FUNC_REG0, &scratch_32);
 	if (ret)
 		return;

 	scratch_32 &= ~O2_SD_FREG0_LEDOFF;
 	pci_write_config_dword(chip->pdev,
 			       O2_SD_FUNC_REG0, scratch_32);

 	ret = pci_read_config_dword(chip->pdev,
 				    O2_SD_TEST_REG, &scratch_32);
 	if (ret)
 		return;

 	scratch_32 |= O2_SD_LED_ENABLE;
 	pci_write_config_dword(chip->pdev,
 			       O2_SD_TEST_REG, scratch_32);

 }

 static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
 {
 	u32 scratch_32;
 	int ret;
 	/* Improve write performance for SD3.0 */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
 	pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);

 	/* Enable Link abnormal reset generating Reset */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~((1 << 19) | (1 << 11));
 	scratch_32 |= (1 << 10);
 	pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);

 	/* set card power over current protection */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 |= (1 << 4);
 	pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);

 	/* adjust the output delay for SD mode */
 	pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);

 	/* Set the output voltage setting of Aux 1.2v LDO */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(3 << 12);
 	pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);

 	/* Set Max power supply capability of SD host */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(0x01FE);
 	scratch_32 |= 0x00CC;
 	pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
 	/* Set DLL Tuning Window */
 	ret = pci_read_config_dword(chip->pdev,
 				    O2_SD_TUNING_CTRL, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(0x000000FF);
 	scratch_32 |= 0x00000066;
 	pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);

 	/* Set UHS2 T_EIDLE */
 	ret = pci_read_config_dword(chip->pdev,
 				    O2_SD_UHS2_L1_CTRL, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(0x000000FC);
 	scratch_32 |= 0x00000084;
 	pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);

 	/* Set UHS2 Termination */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~((1 << 21) | (1 << 30));

 	pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);

 	/* Set L1 Entrance Timer */
 	ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(0xf0000000);
 	scratch_32 |= 0x30000000;
 	pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);

 	ret = pci_read_config_dword(chip->pdev,
 				    O2_SD_MISC_CTRL4, &scratch_32);
 	if (ret)
 		return;
 	scratch_32 &= ~(0x000f0000);
 	scratch_32 |= 0x00080000;
 	pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
 }

 static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
 				    struct sdhci_host *host)
 {
 	int ret;

 	ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI);
 	if (!ret) {
 		pr_info("%s: unsupport msi, use INTx irq\n",
 			mmc_hostname(host->mmc));
 		return;
 	}

 	ret = pci_alloc_irq_vectors(chip->pdev, 1, 1,
 				    PCI_IRQ_MSI | PCI_IRQ_MSIX);
 	if (ret < 0) {
 		pr_err("%s: enable PCI MSI failed, err=%d\n",
 		       mmc_hostname(host->mmc), ret);
 		return;
 	}

 	host->irq = pci_irq_vector(chip->pdev, 0);
 }

 static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
 {
 	ktime_t timeout;
 	u32 scratch32;

 	/* Wait max 50 ms */
 	timeout = ktime_add_ms(ktime_get(), 50);
 	while (1) {
 		bool timedout = ktime_after(ktime_get(), timeout);

 		scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
 		if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
 		    == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
 			break;

 		if (timedout) {
 			pr_err("%s: Card Detect debounce never finished.\n",
 			       mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
 			return;
 		}
 		udelay(10);
 	}
 }

 static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
 {
 	ktime_t timeout;
 	u16 scratch;
 	u32 scratch32;

 	/* PLL software reset */
 	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
 	scratch32 |= O2_PLL_SOFT_RESET;
 	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
 	udelay(1);
 	scratch32 &= ~(O2_PLL_SOFT_RESET);
 	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);

 	/* PLL force active */
 	scratch32 |= O2_PLL_FORCE_ACTIVE;
 	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);

 	/* Wait max 20 ms */
 	timeout = ktime_add_ms(ktime_get(), 20);
 	while (1) {
 		bool timedout = ktime_after(ktime_get(), timeout);

 		scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
 		if (scratch & O2_PLL_LOCK_STATUS)
 			break;
 		if (timedout) {
 			pr_err("%s: Internal clock never stabilised.\n",
 			       mmc_hostname(host->mmc));
 			sdhci_dumpregs(host);
 			goto out;
 		}
 		udelay(10);
 	}

 	/* Wait for card detect finish */
 	udelay(1);
 	sdhci_o2_wait_card_detect_stable(host);

 out:
 	/* Cancel PLL force active */
 	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
 	scratch32 &= ~O2_PLL_FORCE_ACTIVE;
 	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
 }

 static int sdhci_o2_get_cd(struct mmc_host *mmc)
 {
 	struct sdhci_host *host = mmc_priv(mmc);

 	sdhci_o2_enable_internal_clock(host);

 	return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
 }

 static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
 {
 	/* Enable internal clock */
 	clk |= SDHCI_CLOCK_INT_EN;
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

 	if (sdhci_o2_get_cd(host->mmc)) {
 		clk |= SDHCI_CLOCK_CARD_EN;
 		sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 	}
 }

 void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
 {
 	u16 clk;

 	host->mmc->actual_clock = 0;

 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);

 	if (clock == 0)
 		return;

 	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
 	sdhci_o2_enable_clk(host, clk);
 }

 int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_host *host;
 	u32 reg, caps;
 	int ret;

 	chip = slot->chip;
 	host = slot->host;

 	caps = sdhci_readl(host, SDHCI_CAPABILITIES);

 	/*
 	 * mmc_select_bus_width() will test the bus to determine the actual bus
 	 * width.
 	 */
 	if (caps & SDHCI_CAN_DO_8BIT)
 		host->mmc->caps |= MMC_CAP_8_BIT_DATA;

 	switch (chip->pdev->device) {
 	case PCI_DEVICE_ID_O2_SDS0:
 	case PCI_DEVICE_ID_O2_SEABIRD0:
 	case PCI_DEVICE_ID_O2_SEABIRD1:
 	case PCI_DEVICE_ID_O2_SDS1:
 	case PCI_DEVICE_ID_O2_FUJIN2:
 		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
 		if (reg & 0x1)
 			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;

 		sdhci_pci_o2_enable_msi(chip, host);

 		if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
 			ret = pci_read_config_dword(chip->pdev,
 						    O2_SD_MISC_SETTING, &reg);
 			if (ret)
 				return -EIO;
 			if (reg & (1 << 4)) {
 				pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n",
 					mmc_hostname(host->mmc));
 				host->flags &= ~SDHCI_SIGNALING_330;
 				host->flags |= SDHCI_SIGNALING_180;
 				host->mmc->caps2 |= MMC_CAP2_NO_SD;
 				host->mmc->caps2 |= MMC_CAP2_NO_SDIO;
 				pci_write_config_dword(chip->pdev,
 						       O2_SD_DETECT_SETTING, 3);
 			}

 			slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
 		}

 		host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;

 		if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
 			break;
 		/* set dll watch dog timer */
 		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
 		reg |= (1 << 12);
 		sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);

 		break;
 	default:
 		break;
 	}

 	return 0;
 }

 int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 {
 	int ret;
 	u8 scratch;
 	u32 scratch_32;

 	switch (chip->pdev->device) {
 	case PCI_DEVICE_ID_O2_8220:
 	case PCI_DEVICE_ID_O2_8221:
 	case PCI_DEVICE_ID_O2_8320:
 	case PCI_DEVICE_ID_O2_8321:
 		/* This extra setup is required due to broken ADMA. */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;
 		scratch &= 0x7f;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

 		/* Set Multi 3 to VCC3V# */
 		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);

 		/* Disable CLK_REQ# support after media DET */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_CLKREQ, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x20;
 		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);

 		/* Choose capabilities, enable SDMA.  We have to write 0x01
 		 * to the capabilities register first to unlock it.
 		 */
 		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x01;
 		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
 		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);

 		/* Disable ADMA1/2 */
 		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
 		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);

 		/* Disable the infinite transfer mode */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_INF_MOD, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x08;
 		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);

 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x80;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 		break;
 	case PCI_DEVICE_ID_O2_SDS0:
 	case PCI_DEVICE_ID_O2_SDS1:
 	case PCI_DEVICE_ID_O2_FUJIN2:
 		/* UnLock WP */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;

 		scratch &= 0x7f;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

 		/* DevId=8520 subId= 0x11 or 0x12  Type Chip support */
 		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
 			ret = pci_read_config_dword(chip->pdev,
 						    O2_SD_FUNC_REG0,
 						    &scratch_32);
 			scratch_32 = ((scratch_32 & 0xFF000000) >> 24);

 			/* Check Whether subId is 0x11 or 0x12 */
 			if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) {
 				scratch_32 = 0x25100000;

 				o2_pci_set_baseclk(chip, scratch_32);
 				ret = pci_read_config_dword(chip->pdev,
 							    O2_SD_FUNC_REG4,
 							    &scratch_32);

 				/* Enable Base Clk setting change */
 				scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET;
 				pci_write_config_dword(chip->pdev,
 						       O2_SD_FUNC_REG4,
 						       scratch_32);

 				/* Set Tuning Window to 4 */
 				pci_write_config_byte(chip->pdev,
 						      O2_SD_TUNING_CTRL, 0x44);

 				break;
 			}
 		}

 		/* Enable 8520 led function */
 		o2_pci_led_enable(chip);

 		/* Set timeout CLK */
 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_CLK_SETTING, &scratch_32);
 		if (ret)
 			return ret;

 		scratch_32 &= ~(0xFF00);
 		scratch_32 |= 0x07E0C800;
 		pci_write_config_dword(chip->pdev,
 				       O2_SD_CLK_SETTING, scratch_32);

 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_CLKREQ, &scratch_32);
 		if (ret)
 			return ret;
 		scratch_32 |= 0x3;
 		pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);

 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_PLL_SETTING, &scratch_32);
 		if (ret)
 			return ret;

 		scratch_32 &= ~(0x1F3F070E);
 		scratch_32 |= 0x18270106;
 		pci_write_config_dword(chip->pdev,
 				       O2_SD_PLL_SETTING, scratch_32);

 		/* Disable UHS1 funciton */
 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_CAP_REG2, &scratch_32);
 		if (ret)
 			return ret;
 		scratch_32 &= ~(0xE0);
 		pci_write_config_dword(chip->pdev,
 				       O2_SD_CAP_REG2, scratch_32);

 		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
 			sdhci_pci_o2_fujin2_pci_init(chip);

 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x80;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 		break;
 	case PCI_DEVICE_ID_O2_SEABIRD0:
 	case PCI_DEVICE_ID_O2_SEABIRD1:
 		/* UnLock WP */
 		ret = pci_read_config_byte(chip->pdev,
 				O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;

 		scratch &= 0x7f;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

 		ret = pci_read_config_dword(chip->pdev,
 					    O2_SD_PLL_SETTING, &scratch_32);

 		if ((scratch_32 & 0xff000000) == 0x01000000) {
 			scratch_32 &= 0x0000FFFF;
 			scratch_32 |= 0x1F340000;

 			pci_write_config_dword(chip->pdev,
 					       O2_SD_PLL_SETTING, scratch_32);
 		} else {
 			scratch_32 &= 0x0000FFFF;
 			scratch_32 |= 0x25100000;

 			pci_write_config_dword(chip->pdev,
 					       O2_SD_PLL_SETTING, scratch_32);

 			ret = pci_read_config_dword(chip->pdev,
 						    O2_SD_FUNC_REG4,
 						    &scratch_32);
 			scratch_32 |= (1 << 22);
 			pci_write_config_dword(chip->pdev,
 					       O2_SD_FUNC_REG4, scratch_32);
 		}

 		/* Set Tuning Windows to 5 */
 		pci_write_config_byte(chip->pdev,
 				O2_SD_TUNING_CTRL, 0x55);
 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);
 		if (ret)
 			return ret;
 		scratch |= 0x80;
 		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
 		break;
 	}

 	return 0;
 }

 #ifdef CONFIG_PM_SLEEP
 int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
 {
 	sdhci_pci_o2_probe(chip);
 	return sdhci_pci_resume_host(chip);
 }
 #endif

 static const struct sdhci_ops sdhci_pci_o2_ops = {
 	.set_clock = sdhci_pci_o2_set_clock,
 	.enable_dma = sdhci_pci_enable_dma,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };

 const struct sdhci_pci_fixes sdhci_o2 = {
 	.probe = sdhci_pci_o2_probe,
 	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
 	.probe_slot = sdhci_pci_o2_probe_slot,
 #ifdef CONFIG_PM_SLEEP
 	.resume = sdhci_pci_o2_resume,
 #endif
 	.ops = &sdhci_pci_o2_ops,
 };
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (C) 2013 BayHub Technology Ltd.
	*
	* Authors: Peter Guo <peter.guo@bayhubtech.com>
	* Adam Lee <adam.lee@canonical.com>
	* Ernest Zhang <ernest.zhang@bayhubtech.com>
	*/

	#include <linux/pci.h>
	#include <linux/mmc/host.h>
	#include <linux/mmc/mmc.h>
	#include <linux/delay.h>

	#include "sdhci.h"
	#include "sdhci-pci.h"

	/*
	* O2Micro device registers
	*/

	#define O2_SD_MISC_REG5 0x64
	#define O2_SD_LD0_CTRL 0x68
	#define O2_SD_DEV_CTRL 0x88
	#define O2_SD_LOCK_WP 0xD3
	#define O2_SD_TEST_REG 0xD4
	#define O2_SD_FUNC_REG0 0xDC
	#define O2_SD_MULTI_VCC3V 0xEE
	#define O2_SD_CLKREQ 0xEC
	#define O2_SD_CAPS 0xE0
	#define O2_SD_ADMA1 0xE2
	#define O2_SD_ADMA2 0xE7
	#define O2_SD_INF_MOD 0xF1
	#define O2_SD_MISC_CTRL4 0xFC
	#define O2_SD_TUNING_CTRL 0x300
	#define O2_SD_PLL_SETTING 0x304
	#define O2_SD_MISC_SETTING 0x308
	#define O2_SD_CLK_SETTING 0x328
	#define O2_SD_CAP_REG2 0x330
	#define O2_SD_CAP_REG0 0x334
	#define O2_SD_UHS1_CAP_SETTING 0x33C
	#define O2_SD_DELAY_CTRL 0x350
	#define O2_SD_UHS2_L1_CTRL 0x35C
	#define O2_SD_FUNC_REG3 0x3E0
	#define O2_SD_FUNC_REG4 0x3E4
	#define O2_SD_LED_ENABLE BIT(6)
	#define O2_SD_FREG0_LEDOFF BIT(13)
	#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22)

	#define O2_SD_VENDOR_SETTING 0x110
	#define O2_SD_VENDOR_SETTING2 0x1C8
	#define O2_SD_HW_TUNING_DISABLE BIT(4)

	#define O2_PLL_WDT_CONTROL1 0x1CC
	#define O2_PLL_FORCE_ACTIVE BIT(18)
	#define O2_PLL_LOCK_STATUS BIT(14)
	#define O2_PLL_SOFT_RESET BIT(12)

	#define O2_SD_DETECT_SETTING 0x324

	static void sdhci_o2_set_tuning_mode(struct sdhci_host *host)
	{
	u16 reg;

	/* enable hardware tuning */
	reg = sdhci_readw(host, O2_SD_VENDOR_SETTING);
	reg &= ~O2_SD_HW_TUNING_DISABLE;
	sdhci_writew(host, reg, O2_SD_VENDOR_SETTING);
	}

	static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode)
	{
	int i;

	sdhci_send_tuning(host, MMC_SEND_TUNING_BLOCK_HS200);

	for (i = 0; i < 150; i++) {
	u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);

	if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) {
	if (ctrl & SDHCI_CTRL_TUNED_CLK) {
	host->tuning_done = true;
	return;
	}
	pr_warn("%s: HW tuning failed !\n",
	mmc_hostname(host->mmc));
	break;
	}

	mdelay(1);
	}

	pr_info("%s: Tuning failed, falling back to fixed sampling clock\n",
	mmc_hostname(host->mmc));
	sdhci_reset_tuning(host);
	}

	static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode)
	{
	struct sdhci_host *host = mmc_priv(mmc);
	int current_bus_width = 0;

	/*
	* This handler only implements the eMMC tuning that is specific to
	* this controller. Fall back to the standard method for other TIMING.
	*/
	if (host->timing != MMC_TIMING_MMC_HS200)
	return sdhci_execute_tuning(mmc, opcode);

	if (WARN_ON(opcode != MMC_SEND_TUNING_BLOCK_HS200))
	return -EINVAL;

	/*
	* o2 sdhci host didn't support 8bit emmc tuning
	*/
	if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
	current_bus_width = mmc->ios.bus_width;
	mmc->ios.bus_width = MMC_BUS_WIDTH_4;
	sdhci_set_bus_width(host, MMC_BUS_WIDTH_4);
	}

	sdhci_o2_set_tuning_mode(host);

	sdhci_start_tuning(host);

	__sdhci_o2_execute_tuning(host, opcode);

	sdhci_end_tuning(host);

	if (current_bus_width == MMC_BUS_WIDTH_8) {
	mmc->ios.bus_width = MMC_BUS_WIDTH_8;
	sdhci_set_bus_width(host, current_bus_width);
	}

	host->flags &= ~SDHCI_HS400_TUNING;
	return 0;
	}

	static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value)
	{
	u32 scratch_32;
	pci_read_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, &scratch_32);

	scratch_32 &= 0x0000FFFF;
	scratch_32 \|= value;

	pci_write_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, scratch_32);
	}

	static void o2_pci_led_enable(struct sdhci_pci_chip *chip)
	{
	int ret;
	u32 scratch_32;

	/* Set led of SD host function enable */
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_FUNC_REG0, &scratch_32);
	if (ret)
	return;

	scratch_32 &= ~O2_SD_FREG0_LEDOFF;
	pci_write_config_dword(chip->pdev,
	O2_SD_FUNC_REG0, scratch_32);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_TEST_REG, &scratch_32);
	if (ret)
	return;

	scratch_32 \|= O2_SD_LED_ENABLE;
	pci_write_config_dword(chip->pdev,
	O2_SD_TEST_REG, scratch_32);

	}

	static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
	{
	u32 scratch_32;
	int ret;
	/* Improve write performance for SD3.0 */
	ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~((1 << 12) \| (1 << 13) \| (1 << 14));
	pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);

	/* Enable Link abnormal reset generating Reset */
	ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~((1 << 19) \| (1 << 11));
	scratch_32 \|= (1 << 10);
	pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);

	/* set card power over current protection */
	ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
	if (ret)
	return;
	scratch_32 \|= (1 << 4);
	pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);

	/* adjust the output delay for SD mode */
	pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);

	/* Set the output voltage setting of Aux 1.2v LDO */
	ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(3 << 12);
	pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);

	/* Set Max power supply capability of SD host */
	ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(0x01FE);
	scratch_32 \|= 0x00CC;
	pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
	/* Set DLL Tuning Window */
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_TUNING_CTRL, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(0x000000FF);
	scratch_32 \|= 0x00000066;
	pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);

	/* Set UHS2 T_EIDLE */
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_UHS2_L1_CTRL, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(0x000000FC);
	scratch_32 \|= 0x00000084;
	pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);

	/* Set UHS2 Termination */
	ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~((1 << 21) \| (1 << 30));

	pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);

	/* Set L1 Entrance Timer */
	ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(0xf0000000);
	scratch_32 \|= 0x30000000;
	pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_MISC_CTRL4, &scratch_32);
	if (ret)
	return;
	scratch_32 &= ~(0x000f0000);
	scratch_32 \|= 0x00080000;
	pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
	}

	static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip,
	struct sdhci_host *host)
	{
	int ret;

	ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI);
	if (!ret) {
	pr_info("%s: unsupport msi, use INTx irq\n",
	mmc_hostname(host->mmc));
	return;
	}

	ret = pci_alloc_irq_vectors(chip->pdev, 1, 1,
	PCI_IRQ_MSI \| PCI_IRQ_MSIX);
	if (ret < 0) {
	pr_err("%s: enable PCI MSI failed, err=%d\n",
	mmc_hostname(host->mmc), ret);
	return;
	}

	host->irq = pci_irq_vector(chip->pdev, 0);
	}

	static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host)
	{
	ktime_t timeout;
	u32 scratch32;

	/* Wait max 50 ms */
	timeout = ktime_add_ms(ktime_get(), 50);
	while (1) {
	bool timedout = ktime_after(ktime_get(), timeout);

	scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE);
	if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT
	== (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT)
	break;

	if (timedout) {
	pr_err("%s: Card Detect debounce never finished.\n",
	mmc_hostname(host->mmc));
	sdhci_dumpregs(host);
	return;
	}
	udelay(10);
	}
	}

	static void sdhci_o2_enable_internal_clock(struct sdhci_host *host)
	{
	ktime_t timeout;
	u16 scratch;
	u32 scratch32;

	/* PLL software reset */
	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
	scratch32 \|= O2_PLL_SOFT_RESET;
	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
	udelay(1);
	scratch32 &= ~(O2_PLL_SOFT_RESET);
	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);

	/* PLL force active */
	scratch32 \|= O2_PLL_FORCE_ACTIVE;
	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);

	/* Wait max 20 ms */
	timeout = ktime_add_ms(ktime_get(), 20);
	while (1) {
	bool timedout = ktime_after(ktime_get(), timeout);

	scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1);
	if (scratch & O2_PLL_LOCK_STATUS)
	break;
	if (timedout) {
	pr_err("%s: Internal clock never stabilised.\n",
	mmc_hostname(host->mmc));
	sdhci_dumpregs(host);
	goto out;
	}
	udelay(10);
	}

	/* Wait for card detect finish */
	udelay(1);
	sdhci_o2_wait_card_detect_stable(host);

	out:
	/* Cancel PLL force active */
	scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1);
	scratch32 &= ~O2_PLL_FORCE_ACTIVE;
	sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1);
	}

	static int sdhci_o2_get_cd(struct mmc_host *mmc)
	{
	struct sdhci_host *host = mmc_priv(mmc);

	sdhci_o2_enable_internal_clock(host);

	return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
	}

	static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk)
	{
	/* Enable internal clock */
	clk \|= SDHCI_CLOCK_INT_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);

	if (sdhci_o2_get_cd(host->mmc)) {
	clk \|= SDHCI_CLOCK_CARD_EN;
	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
	}
	}

	void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
	{
	u16 clk;

	host->mmc->actual_clock = 0;

	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);

	if (clock == 0)
	return;

	clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
	sdhci_o2_enable_clk(host, clk);
	}

	int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
	{
	struct sdhci_pci_chip *chip;
	struct sdhci_host *host;
	u32 reg, caps;
	int ret;

	chip = slot->chip;
	host = slot->host;

	caps = sdhci_readl(host, SDHCI_CAPABILITIES);

	/*
	* mmc_select_bus_width() will test the bus to determine the actual bus
	* width.
	*/
	if (caps & SDHCI_CAN_DO_8BIT)
	host->mmc->caps \|= MMC_CAP_8_BIT_DATA;

	switch (chip->pdev->device) {
	case PCI_DEVICE_ID_O2_SDS0:
	case PCI_DEVICE_ID_O2_SEABIRD0:
	case PCI_DEVICE_ID_O2_SEABIRD1:
	case PCI_DEVICE_ID_O2_SDS1:
	case PCI_DEVICE_ID_O2_FUJIN2:
	reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
	if (reg & 0x1)
	host->quirks \|= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;

	sdhci_pci_o2_enable_msi(chip, host);

	if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) {
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_MISC_SETTING, &reg);
	if (ret)
	return -EIO;
	if (reg & (1 << 4)) {
	pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n",
	mmc_hostname(host->mmc));
	host->flags &= ~SDHCI_SIGNALING_330;
	host->flags \|= SDHCI_SIGNALING_180;
	host->mmc->caps2 \|= MMC_CAP2_NO_SD;
	host->mmc->caps2 \|= MMC_CAP2_NO_SDIO;
	pci_write_config_dword(chip->pdev,
	O2_SD_DETECT_SETTING, 3);
	}

	slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd;
	}

	host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning;

	if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
	break;
	/* set dll watch dog timer */
	reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
	reg \|= (1 << 12);
	sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);

	break;
	default:
	break;
	}

	return 0;
	}

	int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
	{
	int ret;
	u8 scratch;
	u32 scratch_32;

	switch (chip->pdev->device) {
	case PCI_DEVICE_ID_O2_8220:
	case PCI_DEVICE_ID_O2_8221:
	case PCI_DEVICE_ID_O2_8320:
	case PCI_DEVICE_ID_O2_8321:
	/* This extra setup is required due to broken ADMA. */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;
	scratch &= 0x7f;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

	/* Set Multi 3 to VCC3V# */
	pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);

	/* Disable CLK_REQ# support after media DET */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_CLKREQ, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x20;
	pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);

	/* Choose capabilities, enable SDMA. We have to write 0x01
	* to the capabilities register first to unlock it.
	*/
	ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x01;
	pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
	pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);

	/* Disable ADMA1/2 */
	pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
	pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);

	/* Disable the infinite transfer mode */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_INF_MOD, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x08;
	pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);

	/* Lock WP */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x80;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
	break;
	case PCI_DEVICE_ID_O2_SDS0:
	case PCI_DEVICE_ID_O2_SDS1:
	case PCI_DEVICE_ID_O2_FUJIN2:
	/* UnLock WP */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;

	scratch &= 0x7f;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

	/* DevId=8520 subId= 0x11 or 0x12 Type Chip support */
	if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) {
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_FUNC_REG0,
	&scratch_32);
	scratch_32 = ((scratch_32 & 0xFF000000) >> 24);

	/* Check Whether subId is 0x11 or 0x12 */
	if ((scratch_32 == 0x11) \|\| (scratch_32 == 0x12)) {
	scratch_32 = 0x25100000;

	o2_pci_set_baseclk(chip, scratch_32);
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_FUNC_REG4,
	&scratch_32);

	/* Enable Base Clk setting change */
	scratch_32 \|= O2_SD_FREG4_ENABLE_CLK_SET;
	pci_write_config_dword(chip->pdev,
	O2_SD_FUNC_REG4,
	scratch_32);

	/* Set Tuning Window to 4 */
	pci_write_config_byte(chip->pdev,
	O2_SD_TUNING_CTRL, 0x44);

	break;
	}
	}

	/* Enable 8520 led function */
	o2_pci_led_enable(chip);

	/* Set timeout CLK */
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_CLK_SETTING, &scratch_32);
	if (ret)
	return ret;

	scratch_32 &= ~(0xFF00);
	scratch_32 \|= 0x07E0C800;
	pci_write_config_dword(chip->pdev,
	O2_SD_CLK_SETTING, scratch_32);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_CLKREQ, &scratch_32);
	if (ret)
	return ret;
	scratch_32 \|= 0x3;
	pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, &scratch_32);
	if (ret)
	return ret;

	scratch_32 &= ~(0x1F3F070E);
	scratch_32 \|= 0x18270106;
	pci_write_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, scratch_32);

	/* Disable UHS1 funciton */
	ret = pci_read_config_dword(chip->pdev,
	O2_SD_CAP_REG2, &scratch_32);
	if (ret)
	return ret;
	scratch_32 &= ~(0xE0);
	pci_write_config_dword(chip->pdev,
	O2_SD_CAP_REG2, scratch_32);

	if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
	sdhci_pci_o2_fujin2_pci_init(chip);

	/* Lock WP */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x80;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
	break;
	case PCI_DEVICE_ID_O2_SEABIRD0:
	case PCI_DEVICE_ID_O2_SEABIRD1:
	/* UnLock WP */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;

	scratch &= 0x7f;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, &scratch_32);

	if ((scratch_32 & 0xff000000) == 0x01000000) {
	scratch_32 &= 0x0000FFFF;
	scratch_32 \|= 0x1F340000;

	pci_write_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, scratch_32);
	} else {
	scratch_32 &= 0x0000FFFF;
	scratch_32 \|= 0x25100000;

	pci_write_config_dword(chip->pdev,
	O2_SD_PLL_SETTING, scratch_32);

	ret = pci_read_config_dword(chip->pdev,
	O2_SD_FUNC_REG4,
	&scratch_32);
	scratch_32 \|= (1 << 22);
	pci_write_config_dword(chip->pdev,
	O2_SD_FUNC_REG4, scratch_32);
	}

	/* Set Tuning Windows to 5 */
	pci_write_config_byte(chip->pdev,
	O2_SD_TUNING_CTRL, 0x55);
	/* Lock WP */
	ret = pci_read_config_byte(chip->pdev,
	O2_SD_LOCK_WP, &scratch);
	if (ret)
	return ret;
	scratch \|= 0x80;
	pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
	break;
	}

	return 0;
	}

	#ifdef CONFIG_PM_SLEEP
	int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
	{
	sdhci_pci_o2_probe(chip);
	return sdhci_pci_resume_host(chip);
	}
	#endif

	static const struct sdhci_ops sdhci_pci_o2_ops = {
	.set_clock = sdhci_pci_o2_set_clock,
	.enable_dma = sdhci_pci_enable_dma,
	.set_bus_width = sdhci_set_bus_width,
	.reset = sdhci_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
	};

	const struct sdhci_pci_fixes sdhci_o2 = {
	.probe = sdhci_pci_o2_probe,
	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
	.quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD,
	.probe_slot = sdhci_pci_o2_probe_slot,
	#ifdef CONFIG_PM_SLEEP
	.resume = sdhci_pci_o2_resume,
	#endif
	.ops = &sdhci_pci_o2_ops,
	};