| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * PCI Express PCI Hot Plug Driver |
| * |
| * Copyright (C) 1995,2001 Compaq Computer Corporation |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) |
| * Copyright (C) 2001 IBM Corp. |
| * Copyright (C) 2003-2004 Intel Corporation |
| * |
| * All rights reserved. |
| * |
| * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> |
| */ |
| |
| #define dev_fmt(fmt) "pciehp: " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/jiffies.h> |
| #include <linux/kthread.h> |
| #include <linux/pci.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| |
| #include "../pci.h" |
| #include "pciehp.h" |
| |
| static inline struct pci_dev *ctrl_dev(struct controller *ctrl) |
| { |
| return ctrl->pcie->port; |
| } |
| |
| static irqreturn_t pciehp_isr(int irq, void *dev_id); |
| static irqreturn_t pciehp_ist(int irq, void *dev_id); |
| static int pciehp_poll(void *data); |
| |
| static inline int pciehp_request_irq(struct controller *ctrl) |
| { |
| int retval, irq = ctrl->pcie->irq; |
| |
| if (pciehp_poll_mode) { |
| ctrl->poll_thread = kthread_run(&pciehp_poll, ctrl, |
| "pciehp_poll-%s", |
| slot_name(ctrl)); |
| return PTR_ERR_OR_ZERO(ctrl->poll_thread); |
| } |
| |
| /* Installs the interrupt handler */ |
| retval = request_threaded_irq(irq, pciehp_isr, pciehp_ist, |
| IRQF_SHARED, "pciehp", ctrl); |
| if (retval) |
| ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n", |
| irq); |
| return retval; |
| } |
| |
| static inline void pciehp_free_irq(struct controller *ctrl) |
| { |
| if (pciehp_poll_mode) |
| kthread_stop(ctrl->poll_thread); |
| else |
| free_irq(ctrl->pcie->irq, ctrl); |
| } |
| |
| static int pcie_poll_cmd(struct controller *ctrl, int timeout) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| |
| while (true) { |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status == (u16) ~0) { |
| ctrl_info(ctrl, "%s: no response from device\n", |
| __func__); |
| return 0; |
| } |
| |
| if (slot_status & PCI_EXP_SLTSTA_CC) { |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_CC); |
| return 1; |
| } |
| if (timeout < 0) |
| break; |
| msleep(10); |
| timeout -= 10; |
| } |
| return 0; /* timeout */ |
| } |
| |
| static void pcie_wait_cmd(struct controller *ctrl) |
| { |
| unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; |
| unsigned long duration = msecs_to_jiffies(msecs); |
| unsigned long cmd_timeout = ctrl->cmd_started + duration; |
| unsigned long now, timeout; |
| int rc; |
| |
| /* |
| * If the controller does not generate notifications for command |
| * completions, we never need to wait between writes. |
| */ |
| if (NO_CMD_CMPL(ctrl)) |
| return; |
| |
| if (!ctrl->cmd_busy) |
| return; |
| |
| /* |
| * Even if the command has already timed out, we want to call |
| * pcie_poll_cmd() so it can clear PCI_EXP_SLTSTA_CC. |
| */ |
| now = jiffies; |
| if (time_before_eq(cmd_timeout, now)) |
| timeout = 1; |
| else |
| timeout = cmd_timeout - now; |
| |
| if (ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE && |
| ctrl->slot_ctrl & PCI_EXP_SLTCTL_CCIE) |
| rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); |
| else |
| rc = pcie_poll_cmd(ctrl, jiffies_to_msecs(timeout)); |
| |
| if (!rc) |
| ctrl_info(ctrl, "Timeout on hotplug command %#06x (issued %u msec ago)\n", |
| ctrl->slot_ctrl, |
| jiffies_to_msecs(jiffies - ctrl->cmd_started)); |
| } |
| |
| #define CC_ERRATUM_MASK (PCI_EXP_SLTCTL_PCC | \ |
| PCI_EXP_SLTCTL_PIC | \ |
| PCI_EXP_SLTCTL_AIC | \ |
| PCI_EXP_SLTCTL_EIC) |
| |
| static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd, |
| u16 mask, bool wait) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl_orig, slot_ctrl; |
| |
| mutex_lock(&ctrl->ctrl_lock); |
| |
| /* |
| * Always wait for any previous command that might still be in progress |
| */ |
| pcie_wait_cmd(ctrl); |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| if (slot_ctrl == (u16) ~0) { |
| ctrl_info(ctrl, "%s: no response from device\n", __func__); |
| goto out; |
| } |
| |
| slot_ctrl_orig = slot_ctrl; |
| slot_ctrl &= ~mask; |
| slot_ctrl |= (cmd & mask); |
| ctrl->cmd_busy = 1; |
| smp_mb(); |
| ctrl->slot_ctrl = slot_ctrl; |
| pcie_capability_write_word(pdev, PCI_EXP_SLTCTL, slot_ctrl); |
| ctrl->cmd_started = jiffies; |
| |
| /* |
| * Controllers with the Intel CF118 and similar errata advertise |
| * Command Completed support, but they only set Command Completed |
| * if we change the "Control" bits for power, power indicator, |
| * attention indicator, or interlock. If we only change the |
| * "Enable" bits, they never set the Command Completed bit. |
| */ |
| if (pdev->broken_cmd_compl && |
| (slot_ctrl_orig & CC_ERRATUM_MASK) == (slot_ctrl & CC_ERRATUM_MASK)) |
| ctrl->cmd_busy = 0; |
| |
| /* |
| * Optionally wait for the hardware to be ready for a new command, |
| * indicating completion of the above issued command. |
| */ |
| if (wait) |
| pcie_wait_cmd(ctrl); |
| |
| out: |
| mutex_unlock(&ctrl->ctrl_lock); |
| } |
| |
| /** |
| * pcie_write_cmd - Issue controller command |
| * @ctrl: controller to which the command is issued |
| * @cmd: command value written to slot control register |
| * @mask: bitmask of slot control register to be modified |
| */ |
| static void pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) |
| { |
| pcie_do_write_cmd(ctrl, cmd, mask, true); |
| } |
| |
| /* Same as above without waiting for the hardware to latch */ |
| static void pcie_write_cmd_nowait(struct controller *ctrl, u16 cmd, u16 mask) |
| { |
| pcie_do_write_cmd(ctrl, cmd, mask, false); |
| } |
| |
| bool pciehp_check_link_active(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 lnk_status; |
| bool ret; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); |
| ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA); |
| |
| if (ret) |
| ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); |
| |
| return ret; |
| } |
| |
| static bool pci_bus_check_dev(struct pci_bus *bus, int devfn) |
| { |
| u32 l; |
| int count = 0; |
| int delay = 1000, step = 20; |
| bool found = false; |
| |
| do { |
| found = pci_bus_read_dev_vendor_id(bus, devfn, &l, 0); |
| count++; |
| |
| if (found) |
| break; |
| |
| msleep(step); |
| delay -= step; |
| } while (delay > 0); |
| |
| if (count > 1) |
| pr_debug("pci %04x:%02x:%02x.%d id reading try %d times with interval %d ms to get %08x\n", |
| pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), |
| PCI_FUNC(devfn), count, step, l); |
| |
| return found; |
| } |
| |
| int pciehp_check_link_status(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| bool found; |
| u16 lnk_status; |
| |
| if (!pcie_wait_for_link(pdev, true)) |
| return -1; |
| |
| found = pci_bus_check_dev(ctrl->pcie->port->subordinate, |
| PCI_DEVFN(0, 0)); |
| |
| /* ignore link or presence changes up to this point */ |
| if (found) |
| atomic_and(~(PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC), |
| &ctrl->pending_events); |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status); |
| ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status); |
| if ((lnk_status & PCI_EXP_LNKSTA_LT) || |
| !(lnk_status & PCI_EXP_LNKSTA_NLW)) { |
| ctrl_err(ctrl, "link training error: status %#06x\n", |
| lnk_status); |
| return -1; |
| } |
| |
| pcie_update_link_speed(ctrl->pcie->port->subordinate, lnk_status); |
| |
| if (!found) |
| return -1; |
| |
| return 0; |
| } |
| |
| static int __pciehp_link_set(struct controller *ctrl, bool enable) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 lnk_ctrl; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &lnk_ctrl); |
| |
| if (enable) |
| lnk_ctrl &= ~PCI_EXP_LNKCTL_LD; |
| else |
| lnk_ctrl |= PCI_EXP_LNKCTL_LD; |
| |
| pcie_capability_write_word(pdev, PCI_EXP_LNKCTL, lnk_ctrl); |
| ctrl_dbg(ctrl, "%s: lnk_ctrl = %x\n", __func__, lnk_ctrl); |
| return 0; |
| } |
| |
| static int pciehp_link_enable(struct controller *ctrl) |
| { |
| return __pciehp_link_set(ctrl, true); |
| } |
| |
| int pciehp_get_raw_indicator_status(struct hotplug_slot *hotplug_slot, |
| u8 *status) |
| { |
| struct controller *ctrl = to_ctrl(hotplug_slot); |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl; |
| |
| pci_config_pm_runtime_get(pdev); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| pci_config_pm_runtime_put(pdev); |
| *status = (slot_ctrl & (PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC)) >> 6; |
| return 0; |
| } |
| |
| int pciehp_get_attention_status(struct hotplug_slot *hotplug_slot, u8 *status) |
| { |
| struct controller *ctrl = to_ctrl(hotplug_slot); |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl; |
| |
| pci_config_pm_runtime_get(pdev); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| pci_config_pm_runtime_put(pdev); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl); |
| |
| switch (slot_ctrl & PCI_EXP_SLTCTL_AIC) { |
| case PCI_EXP_SLTCTL_ATTN_IND_ON: |
| *status = 1; /* On */ |
| break; |
| case PCI_EXP_SLTCTL_ATTN_IND_BLINK: |
| *status = 2; /* Blink */ |
| break; |
| case PCI_EXP_SLTCTL_ATTN_IND_OFF: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| void pciehp_get_power_status(struct controller *ctrl, u8 *status) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_ctrl; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_ctrl); |
| |
| switch (slot_ctrl & PCI_EXP_SLTCTL_PCC) { |
| case PCI_EXP_SLTCTL_PWR_ON: |
| *status = 1; /* On */ |
| break; |
| case PCI_EXP_SLTCTL_PWR_OFF: |
| *status = 0; /* Off */ |
| break; |
| default: |
| *status = 0xFF; |
| break; |
| } |
| } |
| |
| void pciehp_get_latch_status(struct controller *ctrl, u8 *status) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| *status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS); |
| } |
| |
| bool pciehp_card_present(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| return slot_status & PCI_EXP_SLTSTA_PDS; |
| } |
| |
| /** |
| * pciehp_card_present_or_link_active() - whether given slot is occupied |
| * @ctrl: PCIe hotplug controller |
| * |
| * Unlike pciehp_card_present(), which determines presence solely from the |
| * Presence Detect State bit, this helper also returns true if the Link Active |
| * bit is set. This is a concession to broken hotplug ports which hardwire |
| * Presence Detect State to zero, such as Wilocity's [1ae9:0200]. |
| */ |
| bool pciehp_card_present_or_link_active(struct controller *ctrl) |
| { |
| return pciehp_card_present(ctrl) || pciehp_check_link_active(ctrl); |
| } |
| |
| int pciehp_query_power_fault(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| return !!(slot_status & PCI_EXP_SLTSTA_PFD); |
| } |
| |
| int pciehp_set_raw_indicator_status(struct hotplug_slot *hotplug_slot, |
| u8 status) |
| { |
| struct controller *ctrl = to_ctrl(hotplug_slot); |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| |
| pci_config_pm_runtime_get(pdev); |
| pcie_write_cmd_nowait(ctrl, status << 6, |
| PCI_EXP_SLTCTL_AIC | PCI_EXP_SLTCTL_PIC); |
| pci_config_pm_runtime_put(pdev); |
| return 0; |
| } |
| |
| void pciehp_set_attention_status(struct controller *ctrl, u8 value) |
| { |
| u16 slot_cmd; |
| |
| if (!ATTN_LED(ctrl)) |
| return; |
| |
| switch (value) { |
| case 0: /* turn off */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_OFF; |
| break; |
| case 1: /* turn on */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_ON; |
| break; |
| case 2: /* turn blink */ |
| slot_cmd = PCI_EXP_SLTCTL_ATTN_IND_BLINK; |
| break; |
| default: |
| return; |
| } |
| pcie_write_cmd_nowait(ctrl, slot_cmd, PCI_EXP_SLTCTL_AIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, slot_cmd); |
| } |
| |
| void pciehp_green_led_on(struct controller *ctrl) |
| { |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_ON, |
| PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_ON); |
| } |
| |
| void pciehp_green_led_off(struct controller *ctrl) |
| { |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_OFF, |
| PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_OFF); |
| } |
| |
| void pciehp_green_led_blink(struct controller *ctrl) |
| { |
| if (!PWR_LED(ctrl)) |
| return; |
| |
| pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_PWR_IND_BLINK, |
| PCI_EXP_SLTCTL_PIC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_IND_BLINK); |
| } |
| |
| int pciehp_power_on_slot(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 slot_status; |
| int retval; |
| |
| /* Clear power-fault bit from previous power failures */ |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status); |
| if (slot_status & PCI_EXP_SLTSTA_PFD) |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_PFD); |
| ctrl->power_fault_detected = 0; |
| |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_ON); |
| |
| retval = pciehp_link_enable(ctrl); |
| if (retval) |
| ctrl_err(ctrl, "%s: Can not enable the link!\n", __func__); |
| |
| return retval; |
| } |
| |
| void pciehp_power_off_slot(struct controller *ctrl) |
| { |
| pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_OFF, PCI_EXP_SLTCTL_PCC); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, |
| PCI_EXP_SLTCTL_PWR_OFF); |
| } |
| |
| static irqreturn_t pciehp_isr(int irq, void *dev_id) |
| { |
| struct controller *ctrl = (struct controller *)dev_id; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| struct device *parent = pdev->dev.parent; |
| u16 status, events; |
| |
| /* |
| * Interrupts only occur in D3hot or shallower and only if enabled |
| * in the Slot Control register (PCIe r4.0, sec 6.7.3.4). |
| */ |
| if (pdev->current_state == PCI_D3cold || |
| (!(ctrl->slot_ctrl & PCI_EXP_SLTCTL_HPIE) && !pciehp_poll_mode)) |
| return IRQ_NONE; |
| |
| /* |
| * Keep the port accessible by holding a runtime PM ref on its parent. |
| * Defer resume of the parent to the IRQ thread if it's suspended. |
| * Mask the interrupt until then. |
| */ |
| if (parent) { |
| pm_runtime_get_noresume(parent); |
| if (!pm_runtime_active(parent)) { |
| pm_runtime_put(parent); |
| disable_irq_nosync(irq); |
| atomic_or(RERUN_ISR, &ctrl->pending_events); |
| return IRQ_WAKE_THREAD; |
| } |
| } |
| |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status); |
| if (status == (u16) ~0) { |
| ctrl_info(ctrl, "%s: no response from device\n", __func__); |
| if (parent) |
| pm_runtime_put(parent); |
| return IRQ_NONE; |
| } |
| |
| /* |
| * Slot Status contains plain status bits as well as event |
| * notification bits; right now we only want the event bits. |
| */ |
| events = status & (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | |
| PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_CC | |
| PCI_EXP_SLTSTA_DLLSC); |
| |
| /* |
| * If we've already reported a power fault, don't report it again |
| * until we've done something to handle it. |
| */ |
| if (ctrl->power_fault_detected) |
| events &= ~PCI_EXP_SLTSTA_PFD; |
| |
| if (!events) { |
| if (parent) |
| pm_runtime_put(parent); |
| return IRQ_NONE; |
| } |
| |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, events); |
| ctrl_dbg(ctrl, "pending interrupts %#06x from Slot Status\n", events); |
| if (parent) |
| pm_runtime_put(parent); |
| |
| /* |
| * Command Completed notifications are not deferred to the |
| * IRQ thread because it may be waiting for their arrival. |
| */ |
| if (events & PCI_EXP_SLTSTA_CC) { |
| ctrl->cmd_busy = 0; |
| smp_mb(); |
| wake_up(&ctrl->queue); |
| |
| if (events == PCI_EXP_SLTSTA_CC) |
| return IRQ_HANDLED; |
| |
| events &= ~PCI_EXP_SLTSTA_CC; |
| } |
| |
| if (pdev->ignore_hotplug) { |
| ctrl_dbg(ctrl, "ignoring hotplug event %#06x\n", events); |
| return IRQ_HANDLED; |
| } |
| |
| /* Save pending events for consumption by IRQ thread. */ |
| atomic_or(events, &ctrl->pending_events); |
| return IRQ_WAKE_THREAD; |
| } |
| |
| static irqreturn_t pciehp_ist(int irq, void *dev_id) |
| { |
| struct controller *ctrl = (struct controller *)dev_id; |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| irqreturn_t ret; |
| u32 events; |
| |
| pci_config_pm_runtime_get(pdev); |
| |
| /* rerun pciehp_isr() if the port was inaccessible on interrupt */ |
| if (atomic_fetch_and(~RERUN_ISR, &ctrl->pending_events) & RERUN_ISR) { |
| ret = pciehp_isr(irq, dev_id); |
| enable_irq(irq); |
| if (ret != IRQ_WAKE_THREAD) { |
| pci_config_pm_runtime_put(pdev); |
| return ret; |
| } |
| } |
| |
| synchronize_hardirq(irq); |
| events = atomic_xchg(&ctrl->pending_events, 0); |
| if (!events) { |
| pci_config_pm_runtime_put(pdev); |
| return IRQ_NONE; |
| } |
| |
| /* Check Attention Button Pressed */ |
| if (events & PCI_EXP_SLTSTA_ABP) { |
| ctrl_info(ctrl, "Slot(%s): Attention button pressed\n", |
| slot_name(ctrl)); |
| pciehp_handle_button_press(ctrl); |
| } |
| |
| /* Check Power Fault Detected */ |
| if ((events & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) { |
| ctrl->power_fault_detected = 1; |
| ctrl_err(ctrl, "Slot(%s): Power fault\n", slot_name(ctrl)); |
| pciehp_set_attention_status(ctrl, 1); |
| pciehp_green_led_off(ctrl); |
| } |
| |
| /* |
| * Disable requests have higher priority than Presence Detect Changed |
| * or Data Link Layer State Changed events. |
| */ |
| down_read(&ctrl->reset_lock); |
| if (events & DISABLE_SLOT) |
| pciehp_handle_disable_request(ctrl); |
| else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC)) |
| pciehp_handle_presence_or_link_change(ctrl, events); |
| up_read(&ctrl->reset_lock); |
| |
| pci_config_pm_runtime_put(pdev); |
| wake_up(&ctrl->requester); |
| return IRQ_HANDLED; |
| } |
| |
| static int pciehp_poll(void *data) |
| { |
| struct controller *ctrl = data; |
| |
| schedule_timeout_idle(10 * HZ); /* start with 10 sec delay */ |
| |
| while (!kthread_should_stop()) { |
| /* poll for interrupt events or user requests */ |
| while (pciehp_isr(IRQ_NOTCONNECTED, ctrl) == IRQ_WAKE_THREAD || |
| atomic_read(&ctrl->pending_events)) |
| pciehp_ist(IRQ_NOTCONNECTED, ctrl); |
| |
| if (pciehp_poll_time <= 0 || pciehp_poll_time > 60) |
| pciehp_poll_time = 2; /* clamp to sane value */ |
| |
| schedule_timeout_idle(pciehp_poll_time * HZ); |
| } |
| |
| return 0; |
| } |
| |
| static void pcie_enable_notification(struct controller *ctrl) |
| { |
| u16 cmd, mask; |
| |
| /* |
| * TBD: Power fault detected software notification support. |
| * |
| * Power fault detected software notification is not enabled |
| * now, because it caused power fault detected interrupt storm |
| * on some machines. On those machines, power fault detected |
| * bit in the slot status register was set again immediately |
| * when it is cleared in the interrupt service routine, and |
| * next power fault detected interrupt was notified again. |
| */ |
| |
| /* |
| * Always enable link events: thus link-up and link-down shall |
| * always be treated as hotplug and unplug respectively. Enable |
| * presence detect only if Attention Button is not present. |
| */ |
| cmd = PCI_EXP_SLTCTL_DLLSCE; |
| if (ATTN_BUTTN(ctrl)) |
| cmd |= PCI_EXP_SLTCTL_ABPE; |
| else |
| cmd |= PCI_EXP_SLTCTL_PDCE; |
| if (!pciehp_poll_mode) |
| cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE; |
| |
| mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE | |
| PCI_EXP_SLTCTL_PFDE | |
| PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| |
| pcie_write_cmd_nowait(ctrl, cmd, mask); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, cmd); |
| } |
| |
| static void pcie_disable_notification(struct controller *ctrl) |
| { |
| u16 mask; |
| |
| mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE | |
| PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE | |
| PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE | |
| PCI_EXP_SLTCTL_DLLSCE); |
| pcie_write_cmd(ctrl, 0, mask); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0); |
| } |
| |
| void pcie_clear_hotplug_events(struct controller *ctrl) |
| { |
| pcie_capability_write_word(ctrl_dev(ctrl), PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC); |
| } |
| |
| void pcie_enable_interrupt(struct controller *ctrl) |
| { |
| u16 mask; |
| |
| mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; |
| pcie_write_cmd(ctrl, mask, mask); |
| } |
| |
| void pcie_disable_interrupt(struct controller *ctrl) |
| { |
| u16 mask; |
| |
| /* |
| * Mask hot-plug interrupt to prevent it triggering immediately |
| * when the link goes inactive (we still get PME when any of the |
| * enabled events is detected). Same goes with Link Layer State |
| * changed event which generates PME immediately when the link goes |
| * inactive so mask it as well. |
| */ |
| mask = PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_DLLSCE; |
| pcie_write_cmd(ctrl, 0, mask); |
| } |
| |
| /* |
| * pciehp has a 1:1 bus:slot relationship so we ultimately want a secondary |
| * bus reset of the bridge, but at the same time we want to ensure that it is |
| * not seen as a hot-unplug, followed by the hot-plug of the device. Thus, |
| * disable link state notification and presence detection change notification |
| * momentarily, if we see that they could interfere. Also, clear any spurious |
| * events after. |
| */ |
| int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, int probe) |
| { |
| struct controller *ctrl = to_ctrl(hotplug_slot); |
| struct pci_dev *pdev = ctrl_dev(ctrl); |
| u16 stat_mask = 0, ctrl_mask = 0; |
| int rc; |
| |
| if (probe) |
| return 0; |
| |
| down_write(&ctrl->reset_lock); |
| |
| if (!ATTN_BUTTN(ctrl)) { |
| ctrl_mask |= PCI_EXP_SLTCTL_PDCE; |
| stat_mask |= PCI_EXP_SLTSTA_PDC; |
| } |
| ctrl_mask |= PCI_EXP_SLTCTL_DLLSCE; |
| stat_mask |= PCI_EXP_SLTSTA_DLLSC; |
| |
| pcie_write_cmd(ctrl, 0, ctrl_mask); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, 0); |
| |
| rc = pci_bridge_secondary_bus_reset(ctrl->pcie->port); |
| |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, stat_mask); |
| pcie_write_cmd_nowait(ctrl, ctrl_mask, ctrl_mask); |
| ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n", __func__, |
| pci_pcie_cap(ctrl->pcie->port) + PCI_EXP_SLTCTL, ctrl_mask); |
| |
| up_write(&ctrl->reset_lock); |
| return rc; |
| } |
| |
| int pcie_init_notification(struct controller *ctrl) |
| { |
| if (pciehp_request_irq(ctrl)) |
| return -1; |
| pcie_enable_notification(ctrl); |
| ctrl->notification_enabled = 1; |
| return 0; |
| } |
| |
| void pcie_shutdown_notification(struct controller *ctrl) |
| { |
| if (ctrl->notification_enabled) { |
| pcie_disable_notification(ctrl); |
| pciehp_free_irq(ctrl); |
| ctrl->notification_enabled = 0; |
| } |
| } |
| |
| static inline void dbg_ctrl(struct controller *ctrl) |
| { |
| struct pci_dev *pdev = ctrl->pcie->port; |
| u16 reg16; |
| |
| ctrl_dbg(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, ®16); |
| ctrl_dbg(ctrl, "Slot Status : 0x%04x\n", reg16); |
| pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, ®16); |
| ctrl_dbg(ctrl, "Slot Control : 0x%04x\n", reg16); |
| } |
| |
| #define FLAG(x, y) (((x) & (y)) ? '+' : '-') |
| |
| struct controller *pcie_init(struct pcie_device *dev) |
| { |
| struct controller *ctrl; |
| u32 slot_cap, link_cap; |
| u8 poweron; |
| struct pci_dev *pdev = dev->port; |
| struct pci_bus *subordinate = pdev->subordinate; |
| |
| ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); |
| if (!ctrl) |
| return NULL; |
| |
| ctrl->pcie = dev; |
| pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap); |
| |
| if (pdev->hotplug_user_indicators) |
| slot_cap &= ~(PCI_EXP_SLTCAP_AIP | PCI_EXP_SLTCAP_PIP); |
| |
| /* |
| * We assume no Thunderbolt controllers support Command Complete events, |
| * but some controllers falsely claim they do. |
| */ |
| if (pdev->is_thunderbolt) |
| slot_cap |= PCI_EXP_SLTCAP_NCCS; |
| |
| ctrl->slot_cap = slot_cap; |
| mutex_init(&ctrl->ctrl_lock); |
| mutex_init(&ctrl->state_lock); |
| init_rwsem(&ctrl->reset_lock); |
| init_waitqueue_head(&ctrl->requester); |
| init_waitqueue_head(&ctrl->queue); |
| INIT_DELAYED_WORK(&ctrl->button_work, pciehp_queue_pushbutton_work); |
| dbg_ctrl(ctrl); |
| |
| down_read(&pci_bus_sem); |
| ctrl->state = list_empty(&subordinate->devices) ? OFF_STATE : ON_STATE; |
| up_read(&pci_bus_sem); |
| |
| /* Check if Data Link Layer Link Active Reporting is implemented */ |
| pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap); |
| |
| /* Clear all remaining event bits in Slot Status register. */ |
| pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, |
| PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | |
| PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_CC | |
| PCI_EXP_SLTSTA_DLLSC | PCI_EXP_SLTSTA_PDC); |
| |
| ctrl_info(ctrl, "Slot #%d AttnBtn%c PwrCtrl%c MRL%c AttnInd%c PwrInd%c HotPlug%c Surprise%c Interlock%c NoCompl%c LLActRep%c%s\n", |
| (slot_cap & PCI_EXP_SLTCAP_PSN) >> 19, |
| FLAG(slot_cap, PCI_EXP_SLTCAP_ABP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_PCP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_MRLSP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_AIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_PIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_HPC), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_HPS), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_EIP), |
| FLAG(slot_cap, PCI_EXP_SLTCAP_NCCS), |
| FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC), |
| pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : ""); |
| |
| /* |
| * If empty slot's power status is on, turn power off. The IRQ isn't |
| * requested yet, so avoid triggering a notification with this command. |
| */ |
| if (POWER_CTRL(ctrl)) { |
| pciehp_get_power_status(ctrl, &poweron); |
| if (!pciehp_card_present_or_link_active(ctrl) && poweron) { |
| pcie_disable_notification(ctrl); |
| pciehp_power_off_slot(ctrl); |
| } |
| } |
| |
| return ctrl; |
| } |
| |
| void pciehp_release_ctrl(struct controller *ctrl) |
| { |
| cancel_delayed_work_sync(&ctrl->button_work); |
| kfree(ctrl); |
| } |
| |
| static void quirk_cmd_compl(struct pci_dev *pdev) |
| { |
| u32 slot_cap; |
| |
| if (pci_is_pcie(pdev)) { |
| pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap); |
| if (slot_cap & PCI_EXP_SLTCAP_HPC && |
| !(slot_cap & PCI_EXP_SLTCAP_NCCS)) |
| pdev->broken_cmd_compl = 1; |
| } |
| } |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0400, |
| PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_QCOM, 0x0401, |
| PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_HXT, 0x0401, |
| PCI_CLASS_BRIDGE_PCI, 8, quirk_cmd_compl); |