| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Junction temperature thermal driver for Maxim Max77620. |
| * |
| * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. |
| * |
| * Author: Laxman Dewangan <ldewangan@nvidia.com> |
| * Mallikarjun Kasoju <mkasoju@nvidia.com> |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/max77620.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/thermal.h> |
| |
| #define MAX77620_NORMAL_OPERATING_TEMP 100000 |
| #define MAX77620_TJALARM1_TEMP 120000 |
| #define MAX77620_TJALARM2_TEMP 140000 |
| |
| struct max77620_therm_info { |
| struct device *dev; |
| struct regmap *rmap; |
| struct thermal_zone_device *tz_device; |
| int irq_tjalarm1; |
| int irq_tjalarm2; |
| }; |
| |
| /** |
| * max77620_thermal_read_temp: Read PMIC die temperatue. |
| * @data: Device specific data. |
| * temp: Temperature in millidegrees Celsius |
| * |
| * The actual temperature of PMIC die is not available from PMIC. |
| * PMIC only tells the status if it has crossed or not the threshold level |
| * of 120degC or 140degC. |
| * If threshold has not been crossed then assume die temperature as 100degC |
| * else 120degC or 140deG based on the PMIC die temp threshold status. |
| * |
| * Return 0 on success otherwise error number to show reason of failure. |
| */ |
| |
| static int max77620_thermal_read_temp(void *data, int *temp) |
| { |
| struct max77620_therm_info *mtherm = data; |
| unsigned int val; |
| int ret; |
| |
| ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); |
| if (ret < 0) { |
| dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); |
| return ret; |
| } |
| |
| if (val & MAX77620_IRQ_TJALRM2_MASK) |
| *temp = MAX77620_TJALARM2_TEMP; |
| else if (val & MAX77620_IRQ_TJALRM1_MASK) |
| *temp = MAX77620_TJALARM1_TEMP; |
| else |
| *temp = MAX77620_NORMAL_OPERATING_TEMP; |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_of_device_ops max77620_thermal_ops = { |
| .get_temp = max77620_thermal_read_temp, |
| }; |
| |
| static irqreturn_t max77620_thermal_irq(int irq, void *data) |
| { |
| struct max77620_therm_info *mtherm = data; |
| |
| if (irq == mtherm->irq_tjalarm1) |
| dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n"); |
| else if (irq == mtherm->irq_tjalarm2) |
| dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n"); |
| |
| thermal_zone_device_update(mtherm->tz_device, |
| THERMAL_EVENT_UNSPECIFIED); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int max77620_thermal_probe(struct platform_device *pdev) |
| { |
| struct max77620_therm_info *mtherm; |
| int ret; |
| |
| mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL); |
| if (!mtherm) |
| return -ENOMEM; |
| |
| mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0); |
| mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1); |
| if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) { |
| dev_err(&pdev->dev, "Alarm irq number not available\n"); |
| return -EINVAL; |
| } |
| |
| mtherm->dev = &pdev->dev; |
| mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!mtherm->rmap) { |
| dev_err(&pdev->dev, "Failed to get parent regmap\n"); |
| return -ENODEV; |
| } |
| |
| /* |
| * The reference taken to the parent's node which will be balanced on |
| * reprobe or on platform-device release. |
| */ |
| device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent); |
| |
| mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, |
| mtherm, &max77620_thermal_ops); |
| if (IS_ERR(mtherm->tz_device)) { |
| ret = PTR_ERR(mtherm->tz_device); |
| dev_err(&pdev->dev, "Failed to register thermal zone: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL, |
| max77620_thermal_irq, |
| IRQF_ONESHOT | IRQF_SHARED, |
| dev_name(&pdev->dev), mtherm); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret); |
| return ret; |
| } |
| |
| ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL, |
| max77620_thermal_irq, |
| IRQF_ONESHOT | IRQF_SHARED, |
| dev_name(&pdev->dev), mtherm); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, mtherm); |
| |
| return 0; |
| } |
| |
| static struct platform_device_id max77620_thermal_devtype[] = { |
| { .name = "max77620-thermal", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype); |
| |
| static struct platform_driver max77620_thermal_driver = { |
| .driver = { |
| .name = "max77620-thermal", |
| }, |
| .probe = max77620_thermal_probe, |
| .id_table = max77620_thermal_devtype, |
| }; |
| |
| module_platform_driver(max77620_thermal_driver); |
| |
| MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver"); |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); |
| MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); |
| MODULE_LICENSE("GPL v2"); |