| // SPDX-License-Identifier: GPL-2.0-only | |
| /* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */ | |
| /* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/completion.h> | |
| #include <linux/delay.h> | |
| #include <linux/dma-buf.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kref.h> | |
| #include <linux/list.h> | |
| #include <linux/math64.h> | |
| #include <linux/mm.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/srcu.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/wait.h> | |
| #include <drm/drm_file.h> | |
| #include <drm/drm_gem.h> | |
| #include <drm/drm_prime.h> | |
| #include <drm/drm_print.h> | |
| #include <uapi/drm/qaic_accel.h> | |
| #include "qaic.h" | |
| #define SEM_VAL_MASK GENMASK_ULL(11, 0) | |
| #define SEM_INDEX_MASK GENMASK_ULL(4, 0) | |
| #define BULK_XFER BIT(3) | |
| #define GEN_COMPLETION BIT(4) | |
| #define INBOUND_XFER 1 | |
| #define OUTBOUND_XFER 2 | |
| #define REQHP_OFF 0x0 /* we read this */ | |
| #define REQTP_OFF 0x4 /* we write this */ | |
| #define RSPHP_OFF 0x8 /* we write this */ | |
| #define RSPTP_OFF 0xc /* we read this */ | |
| #define ENCODE_SEM(val, index, sync, cmd, flags) \ | |
| ({ \ | |
| FIELD_PREP(GENMASK(11, 0), (val)) | \ | |
| FIELD_PREP(GENMASK(20, 16), (index)) | \ | |
| FIELD_PREP(BIT(22), (sync)) | \ | |
| FIELD_PREP(GENMASK(26, 24), (cmd)) | \ | |
| FIELD_PREP(GENMASK(30, 29), (flags)) | \ | |
| FIELD_PREP(BIT(31), (cmd) ? 1 : 0); \ | |
| }) | |
| #define NUM_EVENTS 128 | |
| #define NUM_DELAYS 10 | |
| #define fifo_at(base, offset) ((base) + (offset) * get_dbc_req_elem_size()) | |
| static unsigned int wait_exec_default_timeout_ms = 5000; /* 5 sec default */ | |
| module_param(wait_exec_default_timeout_ms, uint, 0600); | |
| MODULE_PARM_DESC(wait_exec_default_timeout_ms, "Default timeout for DRM_IOCTL_QAIC_WAIT_BO"); | |
| static unsigned int datapath_poll_interval_us = 100; /* 100 usec default */ | |
| module_param(datapath_poll_interval_us, uint, 0600); | |
| MODULE_PARM_DESC(datapath_poll_interval_us, | |
| "Amount of time to sleep between activity when datapath polling is enabled"); | |
| struct dbc_req { | |
| /* | |
| * A request ID is assigned to each memory handle going in DMA queue. | |
| * As a single memory handle can enqueue multiple elements in DMA queue | |
| * all of them will have the same request ID. | |
| */ | |
| __le16 req_id; | |
| /* Future use */ | |
| __u8 seq_id; | |
| /* | |
| * Special encoded variable | |
| * 7 0 - Do not force to generate MSI after DMA is completed | |
| * 1 - Force to generate MSI after DMA is completed | |
| * 6:5 Reserved | |
| * 4 1 - Generate completion element in the response queue | |
| * 0 - No Completion Code | |
| * 3 0 - DMA request is a Link list transfer | |
| * 1 - DMA request is a Bulk transfer | |
| * 2 Reserved | |
| * 1:0 00 - No DMA transfer involved | |
| * 01 - DMA transfer is part of inbound transfer | |
| * 10 - DMA transfer has outbound transfer | |
| * 11 - NA | |
| */ | |
| __u8 cmd; | |
| __le32 resv; | |
| /* Source address for the transfer */ | |
| __le64 src_addr; | |
| /* Destination address for the transfer */ | |
| __le64 dest_addr; | |
| /* Length of transfer request */ | |
| __le32 len; | |
| __le32 resv2; | |
| /* Doorbell address */ | |
| __le64 db_addr; | |
| /* | |
| * Special encoded variable | |
| * 7 1 - Doorbell(db) write | |
| * 0 - No doorbell write | |
| * 6:2 Reserved | |
| * 1:0 00 - 32 bit access, db address must be aligned to 32bit-boundary | |
| * 01 - 16 bit access, db address must be aligned to 16bit-boundary | |
| * 10 - 8 bit access, db address must be aligned to 8bit-boundary | |
| * 11 - Reserved | |
| */ | |
| __u8 db_len; | |
| __u8 resv3; | |
| __le16 resv4; | |
| /* 32 bit data written to doorbell address */ | |
| __le32 db_data; | |
| /* | |
| * Special encoded variable | |
| * All the fields of sem_cmdX are passed from user and all are ORed | |
| * together to form sem_cmd. | |
| * 0:11 Semaphore value | |
| * 15:12 Reserved | |
| * 20:16 Semaphore index | |
| * 21 Reserved | |
| * 22 Semaphore Sync | |
| * 23 Reserved | |
| * 26:24 Semaphore command | |
| * 28:27 Reserved | |
| * 29 Semaphore DMA out bound sync fence | |
| * 30 Semaphore DMA in bound sync fence | |
| * 31 Enable semaphore command | |
| */ | |
| __le32 sem_cmd0; | |
| __le32 sem_cmd1; | |
| __le32 sem_cmd2; | |
| __le32 sem_cmd3; | |
| } __packed; | |
| struct dbc_rsp { | |
| /* Request ID of the memory handle whose DMA transaction is completed */ | |
| __le16 req_id; | |
| /* Status of the DMA transaction. 0 : Success otherwise failure */ | |
| __le16 status; | |
| } __packed; | |
| static inline bool bo_queued(struct qaic_bo *bo) | |
| { | |
| return !list_empty(&bo->xfer_list); | |
| } | |
| inline int get_dbc_req_elem_size(void) | |
| { | |
| return sizeof(struct dbc_req); | |
| } | |
| inline int get_dbc_rsp_elem_size(void) | |
| { | |
| return sizeof(struct dbc_rsp); | |
| } | |
| static void free_slice(struct kref *kref) | |
| { | |
| struct bo_slice *slice = container_of(kref, struct bo_slice, ref_count); | |
| slice->bo->total_slice_nents -= slice->nents; | |
| list_del(&slice->slice); | |
| drm_gem_object_put(&slice->bo->base); | |
| sg_free_table(slice->sgt); | |
| kfree(slice->sgt); | |
| kvfree(slice->reqs); | |
| kfree(slice); | |
| } | |
| static int clone_range_of_sgt_for_slice(struct qaic_device *qdev, struct sg_table **sgt_out, | |
| struct sg_table *sgt_in, u64 size, u64 offset) | |
| { | |
| struct scatterlist *sg, *sgn, *sgf, *sgl; | |
| unsigned int len, nents, offf, offl; | |
| struct sg_table *sgt; | |
| size_t total_len; | |
| int ret, j; | |
| /* find out number of relevant nents needed for this mem */ | |
| total_len = 0; | |
| sgf = NULL; | |
| sgl = NULL; | |
| nents = 0; | |
| offf = 0; | |
| offl = 0; | |
| size = size ? size : PAGE_SIZE; | |
| for_each_sgtable_dma_sg(sgt_in, sg, j) { | |
| len = sg_dma_len(sg); | |
| if (!len) | |
| continue; | |
| if (offset >= total_len && offset < total_len + len) { | |
| sgf = sg; | |
| offf = offset - total_len; | |
| } | |
| if (sgf) | |
| nents++; | |
| if (offset + size >= total_len && | |
| offset + size <= total_len + len) { | |
| sgl = sg; | |
| offl = offset + size - total_len; | |
| break; | |
| } | |
| total_len += len; | |
| } | |
| if (!sgf || !sgl) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| sgt = kzalloc_obj(*sgt); | |
| if (!sgt) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ret = sg_alloc_table(sgt, nents, GFP_KERNEL); | |
| if (ret) | |
| goto free_sgt; | |
| /* copy relevant sg node and fix page and length */ | |
| sgn = sgf; | |
| for_each_sgtable_dma_sg(sgt, sg, j) { | |
| memcpy(sg, sgn, sizeof(*sg)); | |
| if (sgn == sgf) { | |
| sg_dma_address(sg) += offf; | |
| sg_dma_len(sg) -= offf; | |
| sg_set_page(sg, sg_page(sgn), sg_dma_len(sg), offf); | |
| } else { | |
| offf = 0; | |
| } | |
| if (sgn == sgl) { | |
| sg_dma_len(sg) = offl - offf; | |
| sg_set_page(sg, sg_page(sgn), offl - offf, offf); | |
| sg_mark_end(sg); | |
| break; | |
| } | |
| sgn = sg_next(sgn); | |
| } | |
| *sgt_out = sgt; | |
| return ret; | |
| free_sgt: | |
| kfree(sgt); | |
| out: | |
| *sgt_out = NULL; | |
| return ret; | |
| } | |
| static int encode_reqs(struct qaic_device *qdev, struct bo_slice *slice, | |
| struct qaic_attach_slice_entry *req) | |
| { | |
| __le64 db_addr = cpu_to_le64(req->db_addr); | |
| __le32 db_data = cpu_to_le32(req->db_data); | |
| struct scatterlist *sg; | |
| __u8 cmd = BULK_XFER; | |
| int presync_sem; | |
| u64 dev_addr; | |
| __u8 db_len; | |
| int i; | |
| if (!slice->no_xfer) | |
| cmd |= (slice->dir == DMA_TO_DEVICE ? INBOUND_XFER : OUTBOUND_XFER); | |
| if (req->db_len && !IS_ALIGNED(req->db_addr, req->db_len / 8)) | |
| return -EINVAL; | |
| presync_sem = req->sem0.presync + req->sem1.presync + req->sem2.presync + req->sem3.presync; | |
| if (presync_sem > 1) | |
| return -EINVAL; | |
| presync_sem = req->sem0.presync << 0 | req->sem1.presync << 1 | | |
| req->sem2.presync << 2 | req->sem3.presync << 3; | |
| switch (req->db_len) { | |
| case 32: | |
| db_len = BIT(7); | |
| break; | |
| case 16: | |
| db_len = BIT(7) | 1; | |
| break; | |
| case 8: | |
| db_len = BIT(7) | 2; | |
| break; | |
| case 0: | |
| db_len = 0; /* doorbell is not active for this command */ | |
| break; | |
| default: | |
| return -EINVAL; /* should never hit this */ | |
| } | |
| /* | |
| * When we end up splitting up a single request (ie a buf slice) into | |
| * multiple DMA requests, we have to manage the sync data carefully. | |
| * There can only be one presync sem. That needs to be on every xfer | |
| * so that the DMA engine doesn't transfer data before the receiver is | |
| * ready. We only do the doorbell and postsync sems after the xfer. | |
| * To guarantee previous xfers for the request are complete, we use a | |
| * fence. | |
| */ | |
| dev_addr = req->dev_addr; | |
| for_each_sgtable_dma_sg(slice->sgt, sg, i) { | |
| slice->reqs[i].cmd = cmd; | |
| slice->reqs[i].src_addr = cpu_to_le64(slice->dir == DMA_TO_DEVICE ? | |
| sg_dma_address(sg) : dev_addr); | |
| slice->reqs[i].dest_addr = cpu_to_le64(slice->dir == DMA_TO_DEVICE ? | |
| dev_addr : sg_dma_address(sg)); | |
| /* | |
| * sg_dma_len(sg) returns size of a DMA segment, maximum DMA | |
| * segment size is set to UINT_MAX by qaic and hence return | |
| * values of sg_dma_len(sg) can never exceed u32 range. So, | |
| * by down sizing we are not corrupting the value. | |
| */ | |
| slice->reqs[i].len = cpu_to_le32((u32)sg_dma_len(sg)); | |
| switch (presync_sem) { | |
| case BIT(0): | |
| slice->reqs[i].sem_cmd0 = cpu_to_le32(ENCODE_SEM(req->sem0.val, | |
| req->sem0.index, | |
| req->sem0.presync, | |
| req->sem0.cmd, | |
| req->sem0.flags)); | |
| break; | |
| case BIT(1): | |
| slice->reqs[i].sem_cmd1 = cpu_to_le32(ENCODE_SEM(req->sem1.val, | |
| req->sem1.index, | |
| req->sem1.presync, | |
| req->sem1.cmd, | |
| req->sem1.flags)); | |
| break; | |
| case BIT(2): | |
| slice->reqs[i].sem_cmd2 = cpu_to_le32(ENCODE_SEM(req->sem2.val, | |
| req->sem2.index, | |
| req->sem2.presync, | |
| req->sem2.cmd, | |
| req->sem2.flags)); | |
| break; | |
| case BIT(3): | |
| slice->reqs[i].sem_cmd3 = cpu_to_le32(ENCODE_SEM(req->sem3.val, | |
| req->sem3.index, | |
| req->sem3.presync, | |
| req->sem3.cmd, | |
| req->sem3.flags)); | |
| break; | |
| } | |
| dev_addr += sg_dma_len(sg); | |
| } | |
| /* add post transfer stuff to last segment */ | |
| i--; | |
| slice->reqs[i].cmd |= GEN_COMPLETION; | |
| slice->reqs[i].db_addr = db_addr; | |
| slice->reqs[i].db_len = db_len; | |
| slice->reqs[i].db_data = db_data; | |
| /* | |
| * Add a fence if we have more than one request going to the hardware | |
| * representing the entirety of the user request, and the user request | |
| * has no presync condition. | |
| * Fences are expensive, so we try to avoid them. We rely on the | |
| * hardware behavior to avoid needing one when there is a presync | |
| * condition. When a presync exists, all requests for that same | |
| * presync will be queued into a fifo. Thus, since we queue the | |
| * post xfer activity only on the last request we queue, the hardware | |
| * will ensure that the last queued request is processed last, thus | |
| * making sure the post xfer activity happens at the right time without | |
| * a fence. | |
| */ | |
| if (i && !presync_sem) | |
| req->sem0.flags |= (slice->dir == DMA_TO_DEVICE ? | |
| QAIC_SEM_INSYNCFENCE : QAIC_SEM_OUTSYNCFENCE); | |
| slice->reqs[i].sem_cmd0 = cpu_to_le32(ENCODE_SEM(req->sem0.val, req->sem0.index, | |
| req->sem0.presync, req->sem0.cmd, | |
| req->sem0.flags)); | |
| slice->reqs[i].sem_cmd1 = cpu_to_le32(ENCODE_SEM(req->sem1.val, req->sem1.index, | |
| req->sem1.presync, req->sem1.cmd, | |
| req->sem1.flags)); | |
| slice->reqs[i].sem_cmd2 = cpu_to_le32(ENCODE_SEM(req->sem2.val, req->sem2.index, | |
| req->sem2.presync, req->sem2.cmd, | |
| req->sem2.flags)); | |
| slice->reqs[i].sem_cmd3 = cpu_to_le32(ENCODE_SEM(req->sem3.val, req->sem3.index, | |
| req->sem3.presync, req->sem3.cmd, | |
| req->sem3.flags)); | |
| return 0; | |
| } | |
| static int qaic_map_one_slice(struct qaic_device *qdev, struct qaic_bo *bo, | |
| struct qaic_attach_slice_entry *slice_ent) | |
| { | |
| struct sg_table *sgt = NULL; | |
| struct bo_slice *slice; | |
| int ret; | |
| ret = clone_range_of_sgt_for_slice(qdev, &sgt, bo->sgt, slice_ent->size, slice_ent->offset); | |
| if (ret) | |
| goto out; | |
| slice = kmalloc_obj(*slice); | |
| if (!slice) { | |
| ret = -ENOMEM; | |
| goto free_sgt; | |
| } | |
| slice->reqs = kvzalloc_objs(*slice->reqs, sgt->nents); | |
| if (!slice->reqs) { | |
| ret = -ENOMEM; | |
| goto free_slice; | |
| } | |
| slice->no_xfer = !slice_ent->size; | |
| slice->sgt = sgt; | |
| slice->nents = sgt->nents; | |
| slice->dir = bo->dir; | |
| slice->bo = bo; | |
| slice->size = slice_ent->size; | |
| slice->offset = slice_ent->offset; | |
| ret = encode_reqs(qdev, slice, slice_ent); | |
| if (ret) | |
| goto free_req; | |
| bo->total_slice_nents += sgt->nents; | |
| kref_init(&slice->ref_count); | |
| drm_gem_object_get(&bo->base); | |
| list_add_tail(&slice->slice, &bo->slices); | |
| return 0; | |
| free_req: | |
| kvfree(slice->reqs); | |
| free_slice: | |
| kfree(slice); | |
| free_sgt: | |
| sg_free_table(sgt); | |
| kfree(sgt); | |
| out: | |
| return ret; | |
| } | |
| static int create_sgt(struct qaic_device *qdev, struct sg_table **sgt_out, u64 size) | |
| { | |
| struct scatterlist *sg; | |
| struct sg_table *sgt; | |
| struct page **pages; | |
| int *pages_order; | |
| int buf_extra; | |
| int max_order; | |
| int nr_pages; | |
| int ret = 0; | |
| int i, j, k; | |
| int order; | |
| if (size) { | |
| nr_pages = DIV_ROUND_UP(size, PAGE_SIZE); | |
| /* | |
| * calculate how much extra we are going to allocate, to remove | |
| * later | |
| */ | |
| buf_extra = (PAGE_SIZE - size % PAGE_SIZE) % PAGE_SIZE; | |
| max_order = min(MAX_PAGE_ORDER, get_order(size)); | |
| } else { | |
| /* allocate a single page for book keeping */ | |
| nr_pages = 1; | |
| buf_extra = 0; | |
| max_order = 0; | |
| } | |
| pages = kvmalloc_array(nr_pages, sizeof(*pages) + sizeof(*pages_order), GFP_KERNEL); | |
| if (!pages) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| pages_order = (void *)pages + sizeof(*pages) * nr_pages; | |
| /* | |
| * Allocate requested memory using alloc_pages. It is possible to allocate | |
| * the requested memory in multiple chunks by calling alloc_pages | |
| * multiple times. Use SG table to handle multiple allocated pages. | |
| */ | |
| i = 0; | |
| while (nr_pages > 0) { | |
| order = min(get_order(nr_pages * PAGE_SIZE), max_order); | |
| while (1) { | |
| pages[i] = alloc_pages(GFP_KERNEL | GFP_HIGHUSER | | |
| __GFP_NOWARN | __GFP_ZERO | | |
| (order ? __GFP_NORETRY : __GFP_RETRY_MAYFAIL), | |
| order); | |
| if (pages[i]) | |
| break; | |
| if (!order--) { | |
| ret = -ENOMEM; | |
| goto free_partial_alloc; | |
| } | |
| } | |
| max_order = order; | |
| pages_order[i] = order; | |
| nr_pages -= 1 << order; | |
| if (nr_pages <= 0) | |
| /* account for over allocation */ | |
| buf_extra += abs(nr_pages) * PAGE_SIZE; | |
| i++; | |
| } | |
| sgt = kmalloc_obj(*sgt); | |
| if (!sgt) { | |
| ret = -ENOMEM; | |
| goto free_partial_alloc; | |
| } | |
| if (sg_alloc_table(sgt, i, GFP_KERNEL)) { | |
| ret = -ENOMEM; | |
| goto free_sgt; | |
| } | |
| /* Populate the SG table with the allocated memory pages */ | |
| sg = sgt->sgl; | |
| for (k = 0; k < i; k++, sg = sg_next(sg)) { | |
| /* Last entry requires special handling */ | |
| if (k < i - 1) { | |
| sg_set_page(sg, pages[k], PAGE_SIZE << pages_order[k], 0); | |
| } else { | |
| sg_set_page(sg, pages[k], (PAGE_SIZE << pages_order[k]) - buf_extra, 0); | |
| sg_mark_end(sg); | |
| } | |
| } | |
| kvfree(pages); | |
| *sgt_out = sgt; | |
| return ret; | |
| free_sgt: | |
| kfree(sgt); | |
| free_partial_alloc: | |
| for (j = 0; j < i; j++) | |
| __free_pages(pages[j], pages_order[j]); | |
| kvfree(pages); | |
| out: | |
| *sgt_out = NULL; | |
| return ret; | |
| } | |
| static bool invalid_sem(struct qaic_sem *sem) | |
| { | |
| if (sem->val & ~SEM_VAL_MASK || sem->index & ~SEM_INDEX_MASK || | |
| !(sem->presync == 0 || sem->presync == 1) || sem->pad || | |
| sem->flags & ~(QAIC_SEM_INSYNCFENCE | QAIC_SEM_OUTSYNCFENCE) || | |
| sem->cmd > QAIC_SEM_WAIT_GT_0) | |
| return true; | |
| return false; | |
| } | |
| static int qaic_validate_req(struct qaic_device *qdev, struct qaic_attach_slice_entry *slice_ent, | |
| u32 count, u64 total_size) | |
| { | |
| u64 total; | |
| int i; | |
| for (i = 0; i < count; i++) { | |
| if (!(slice_ent[i].db_len == 32 || slice_ent[i].db_len == 16 || | |
| slice_ent[i].db_len == 8 || slice_ent[i].db_len == 0) || | |
| invalid_sem(&slice_ent[i].sem0) || invalid_sem(&slice_ent[i].sem1) || | |
| invalid_sem(&slice_ent[i].sem2) || invalid_sem(&slice_ent[i].sem3)) | |
| return -EINVAL; | |
| if (check_add_overflow(slice_ent[i].offset, slice_ent[i].size, &total) || | |
| total > total_size) | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void qaic_free_sgt(struct sg_table *sgt) | |
| { | |
| struct scatterlist *sg; | |
| if (!sgt) | |
| return; | |
| for (sg = sgt->sgl; sg; sg = sg_next(sg)) | |
| if (sg_page(sg)) | |
| __free_pages(sg_page(sg), get_order(sg->length)); | |
| sg_free_table(sgt); | |
| kfree(sgt); | |
| } | |
| static void qaic_gem_print_info(struct drm_printer *p, unsigned int indent, | |
| const struct drm_gem_object *obj) | |
| { | |
| struct qaic_bo *bo = to_qaic_bo(obj); | |
| drm_printf_indent(p, indent, "BO DMA direction %d\n", bo->dir); | |
| } | |
| static const struct vm_operations_struct drm_vm_ops = { | |
| .open = drm_gem_vm_open, | |
| .close = drm_gem_vm_close, | |
| }; | |
| static int qaic_gem_object_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma) | |
| { | |
| struct qaic_bo *bo = to_qaic_bo(obj); | |
| unsigned long remap_start; | |
| unsigned long offset = 0; | |
| unsigned long remap_end; | |
| struct scatterlist *sg; | |
| unsigned long length; | |
| int ret = 0; | |
| if (drm_gem_is_imported(obj)) | |
| return -EINVAL; | |
| for (sg = bo->sgt->sgl; sg; sg = sg_next(sg)) { | |
| if (sg_page(sg)) { | |
| /* if sg is too large for the VMA, so truncate it to fit */ | |
| if (check_add_overflow(vma->vm_start, offset, &remap_start)) | |
| return -EINVAL; | |
| if (check_add_overflow(remap_start, sg->length, &remap_end)) | |
| return -EINVAL; | |
| if (remap_end > vma->vm_end) { | |
| if (check_sub_overflow(vma->vm_end, remap_start, &length)) | |
| return -EINVAL; | |
| } else { | |
| length = sg->length; | |
| } | |
| if (length == 0) | |
| goto out; | |
| ret = remap_pfn_range(vma, vma->vm_start + offset, page_to_pfn(sg_page(sg)), | |
| length, vma->vm_page_prot); | |
| if (ret) | |
| goto out; | |
| offset += length; | |
| } | |
| } | |
| out: | |
| return ret; | |
| } | |
| static void qaic_free_object(struct drm_gem_object *obj) | |
| { | |
| struct qaic_bo *bo = to_qaic_bo(obj); | |
| if (drm_gem_is_imported(obj)) { | |
| /* DMABUF/PRIME Path */ | |
| drm_prime_gem_destroy(obj, NULL); | |
| } else { | |
| /* Private buffer allocation path */ | |
| qaic_free_sgt(bo->sgt); | |
| } | |
| mutex_destroy(&bo->lock); | |
| drm_gem_object_release(obj); | |
| kfree(bo); | |
| } | |
| static struct sg_table *qaic_get_sg_table(struct drm_gem_object *obj) | |
| { | |
| struct qaic_bo *bo = to_qaic_bo(obj); | |
| struct scatterlist *sg, *sg_in; | |
| struct sg_table *sgt, *sgt_in; | |
| int i; | |
| sgt_in = bo->sgt; | |
| sgt = kmalloc_obj(*sgt); | |
| if (!sgt) | |
| return ERR_PTR(-ENOMEM); | |
| if (sg_alloc_table(sgt, sgt_in->orig_nents, GFP_KERNEL)) { | |
| kfree(sgt); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| sg = sgt->sgl; | |
| for_each_sgtable_sg(sgt_in, sg_in, i) { | |
| memcpy(sg, sg_in, sizeof(*sg)); | |
| sg = sg_next(sg); | |
| } | |
| return sgt; | |
| } | |
| static const struct drm_gem_object_funcs qaic_gem_funcs = { | |
| .free = qaic_free_object, | |
| .get_sg_table = qaic_get_sg_table, | |
| .print_info = qaic_gem_print_info, | |
| .mmap = qaic_gem_object_mmap, | |
| .vm_ops = &drm_vm_ops, | |
| }; | |
| static void qaic_init_bo(struct qaic_bo *bo, bool reinit) | |
| { | |
| if (reinit) { | |
| bo->sliced = false; | |
| reinit_completion(&bo->xfer_done); | |
| } else { | |
| mutex_init(&bo->lock); | |
| init_completion(&bo->xfer_done); | |
| } | |
| complete_all(&bo->xfer_done); | |
| INIT_LIST_HEAD(&bo->slices); | |
| INIT_LIST_HEAD(&bo->xfer_list); | |
| } | |
| static struct qaic_bo *qaic_alloc_init_bo(void) | |
| { | |
| struct qaic_bo *bo; | |
| bo = kzalloc_obj(*bo); | |
| if (!bo) | |
| return ERR_PTR(-ENOMEM); | |
| qaic_init_bo(bo, false); | |
| return bo; | |
| } | |
| int qaic_create_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_create_bo *args = data; | |
| int usr_rcu_id, qdev_rcu_id; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| struct qaic_user *usr; | |
| struct qaic_bo *bo; | |
| size_t size; | |
| int ret; | |
| if (args->pad) | |
| return -EINVAL; | |
| size = PAGE_ALIGN(args->size); | |
| if (size == 0) | |
| return -EINVAL; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| bo = qaic_alloc_init_bo(); | |
| if (IS_ERR(bo)) { | |
| ret = PTR_ERR(bo); | |
| goto unlock_dev_srcu; | |
| } | |
| obj = &bo->base; | |
| drm_gem_private_object_init(dev, obj, size); | |
| obj->funcs = &qaic_gem_funcs; | |
| ret = create_sgt(qdev, &bo->sgt, size); | |
| if (ret) | |
| goto free_bo; | |
| ret = drm_gem_create_mmap_offset(obj); | |
| if (ret) | |
| goto free_bo; | |
| ret = drm_gem_handle_create(file_priv, obj, &args->handle); | |
| if (ret) | |
| goto free_bo; | |
| drm_gem_object_put(obj); | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return 0; | |
| free_bo: | |
| drm_gem_object_put(obj); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| int qaic_mmap_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_mmap_bo *args = data; | |
| int usr_rcu_id, qdev_rcu_id; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| struct qaic_user *usr; | |
| int ret = 0; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto unlock_dev_srcu; | |
| } | |
| args->offset = drm_vma_node_offset_addr(&obj->vma_node); | |
| drm_gem_object_put(obj); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| struct drm_gem_object *qaic_gem_prime_import(struct drm_device *dev, struct dma_buf *dma_buf) | |
| { | |
| struct dma_buf_attachment *attach; | |
| struct drm_gem_object *obj; | |
| struct qaic_bo *bo; | |
| int ret; | |
| bo = qaic_alloc_init_bo(); | |
| if (IS_ERR(bo)) { | |
| ret = PTR_ERR(bo); | |
| goto out; | |
| } | |
| obj = &bo->base; | |
| get_dma_buf(dma_buf); | |
| attach = dma_buf_attach(dma_buf, dev->dev); | |
| if (IS_ERR(attach)) { | |
| ret = PTR_ERR(attach); | |
| goto attach_fail; | |
| } | |
| if (!attach->dmabuf->size) { | |
| ret = -EINVAL; | |
| goto size_align_fail; | |
| } | |
| drm_gem_private_object_init(dev, obj, attach->dmabuf->size); | |
| /* | |
| * skipping dma_buf_map_attachment() as we do not know the direction | |
| * just yet. Once the direction is known in the subsequent IOCTL to | |
| * attach slicing, we can do it then. | |
| */ | |
| obj->funcs = &qaic_gem_funcs; | |
| obj->import_attach = attach; | |
| obj->resv = dma_buf->resv; | |
| return obj; | |
| size_align_fail: | |
| dma_buf_detach(dma_buf, attach); | |
| attach_fail: | |
| dma_buf_put(dma_buf); | |
| kfree(bo); | |
| out: | |
| return ERR_PTR(ret); | |
| } | |
| static int qaic_prepare_import_bo(struct qaic_bo *bo, struct qaic_attach_slice_hdr *hdr) | |
| { | |
| struct drm_gem_object *obj = &bo->base; | |
| struct sg_table *sgt; | |
| int ret; | |
| sgt = dma_buf_map_attachment(obj->import_attach, hdr->dir); | |
| if (IS_ERR(sgt)) { | |
| ret = PTR_ERR(sgt); | |
| return ret; | |
| } | |
| bo->sgt = sgt; | |
| return 0; | |
| } | |
| static int qaic_prepare_export_bo(struct qaic_device *qdev, struct qaic_bo *bo, | |
| struct qaic_attach_slice_hdr *hdr) | |
| { | |
| int ret; | |
| ret = dma_map_sgtable(&qdev->pdev->dev, bo->sgt, hdr->dir, 0); | |
| if (ret) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int qaic_prepare_bo(struct qaic_device *qdev, struct qaic_bo *bo, | |
| struct qaic_attach_slice_hdr *hdr) | |
| { | |
| int ret; | |
| if (drm_gem_is_imported(&bo->base)) | |
| ret = qaic_prepare_import_bo(bo, hdr); | |
| else | |
| ret = qaic_prepare_export_bo(qdev, bo, hdr); | |
| bo->dir = hdr->dir; | |
| bo->dbc = &qdev->dbc[hdr->dbc_id]; | |
| bo->nr_slice = hdr->count; | |
| return ret; | |
| } | |
| static void qaic_unprepare_import_bo(struct qaic_bo *bo) | |
| { | |
| dma_buf_unmap_attachment(bo->base.import_attach, bo->sgt, bo->dir); | |
| bo->sgt = NULL; | |
| } | |
| static void qaic_unprepare_export_bo(struct qaic_device *qdev, struct qaic_bo *bo) | |
| { | |
| dma_unmap_sgtable(&qdev->pdev->dev, bo->sgt, bo->dir, 0); | |
| } | |
| static void qaic_unprepare_bo(struct qaic_device *qdev, struct qaic_bo *bo) | |
| { | |
| if (drm_gem_is_imported(&bo->base)) | |
| qaic_unprepare_import_bo(bo); | |
| else | |
| qaic_unprepare_export_bo(qdev, bo); | |
| bo->dir = 0; | |
| bo->dbc = NULL; | |
| bo->nr_slice = 0; | |
| } | |
| static void qaic_free_slices_bo(struct qaic_bo *bo) | |
| { | |
| struct bo_slice *slice, *temp; | |
| list_for_each_entry_safe(slice, temp, &bo->slices, slice) | |
| kref_put(&slice->ref_count, free_slice); | |
| if (WARN_ON_ONCE(bo->total_slice_nents != 0)) | |
| bo->total_slice_nents = 0; | |
| bo->nr_slice = 0; | |
| } | |
| static int qaic_attach_slicing_bo(struct qaic_device *qdev, struct qaic_bo *bo, | |
| struct qaic_attach_slice_hdr *hdr, | |
| struct qaic_attach_slice_entry *slice_ent) | |
| { | |
| int ret, i; | |
| for (i = 0; i < hdr->count; i++) { | |
| ret = qaic_map_one_slice(qdev, bo, &slice_ent[i]); | |
| if (ret) { | |
| qaic_free_slices_bo(bo); | |
| return ret; | |
| } | |
| } | |
| if (bo->total_slice_nents > bo->dbc->nelem) { | |
| qaic_free_slices_bo(bo); | |
| return -ENOSPC; | |
| } | |
| return 0; | |
| } | |
| int qaic_attach_slice_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_attach_slice_entry *slice_ent; | |
| struct qaic_attach_slice *args = data; | |
| int rcu_id, usr_rcu_id, qdev_rcu_id; | |
| struct dma_bridge_chan *dbc; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| unsigned long arg_size; | |
| struct qaic_user *usr; | |
| u8 __user *user_data; | |
| struct qaic_bo *bo; | |
| int ret; | |
| if (args->hdr.count == 0) | |
| return -EINVAL; | |
| if (check_mul_overflow((unsigned long)args->hdr.count, | |
| (unsigned long)sizeof(*slice_ent), | |
| &arg_size)) | |
| return -EINVAL; | |
| if (!(args->hdr.dir == DMA_TO_DEVICE || args->hdr.dir == DMA_FROM_DEVICE)) | |
| return -EINVAL; | |
| if (args->data == 0) | |
| return -EINVAL; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| if (args->hdr.dbc_id >= qdev->num_dbc) { | |
| ret = -EINVAL; | |
| goto unlock_dev_srcu; | |
| } | |
| user_data = u64_to_user_ptr(args->data); | |
| slice_ent = memdup_user(user_data, arg_size); | |
| if (IS_ERR(slice_ent)) { | |
| ret = PTR_ERR(slice_ent); | |
| goto unlock_dev_srcu; | |
| } | |
| obj = drm_gem_object_lookup(file_priv, args->hdr.handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto free_slice_ent; | |
| } | |
| ret = qaic_validate_req(qdev, slice_ent, args->hdr.count, obj->size); | |
| if (ret) | |
| goto put_bo; | |
| bo = to_qaic_bo(obj); | |
| ret = mutex_lock_interruptible(&bo->lock); | |
| if (ret) | |
| goto put_bo; | |
| if (bo->sliced) { | |
| ret = -EINVAL; | |
| goto unlock_bo; | |
| } | |
| dbc = &qdev->dbc[args->hdr.dbc_id]; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| if (dbc->usr != usr) { | |
| ret = -EINVAL; | |
| goto unlock_ch_srcu; | |
| } | |
| if (dbc->id == qdev->ssr_dbc) { | |
| ret = -EPIPE; | |
| goto unlock_ch_srcu; | |
| } | |
| ret = qaic_prepare_bo(qdev, bo, &args->hdr); | |
| if (ret) | |
| goto unlock_ch_srcu; | |
| ret = qaic_attach_slicing_bo(qdev, bo, &args->hdr, slice_ent); | |
| if (ret) | |
| goto unprepare_bo; | |
| if (args->hdr.dir == DMA_TO_DEVICE) | |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, args->hdr.dir); | |
| bo->sliced = true; | |
| list_add_tail(&bo->bo_list, &bo->dbc->bo_lists); | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| mutex_unlock(&bo->lock); | |
| kfree(slice_ent); | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return 0; | |
| unprepare_bo: | |
| qaic_unprepare_bo(qdev, bo); | |
| unlock_ch_srcu: | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| unlock_bo: | |
| mutex_unlock(&bo->lock); | |
| put_bo: | |
| drm_gem_object_put(obj); | |
| free_slice_ent: | |
| kfree(slice_ent); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| static inline u32 fifo_space_avail(u32 head, u32 tail, u32 q_size) | |
| { | |
| u32 avail = head - tail - 1; | |
| if (head <= tail) | |
| avail += q_size; | |
| return avail; | |
| } | |
| static inline int copy_exec_reqs(struct qaic_device *qdev, struct bo_slice *slice, u32 dbc_id, | |
| u32 head, u32 *ptail) | |
| { | |
| struct dma_bridge_chan *dbc = &qdev->dbc[dbc_id]; | |
| struct dbc_req *reqs = slice->reqs; | |
| u32 tail = *ptail; | |
| u32 avail; | |
| avail = fifo_space_avail(head, tail, dbc->nelem); | |
| if (avail < slice->nents) | |
| return -EAGAIN; | |
| if (tail + slice->nents > dbc->nelem) { | |
| avail = dbc->nelem - tail; | |
| avail = min_t(u32, avail, slice->nents); | |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * avail); | |
| reqs += avail; | |
| avail = slice->nents - avail; | |
| if (avail) | |
| memcpy(dbc->req_q_base, reqs, sizeof(*reqs) * avail); | |
| } else { | |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * slice->nents); | |
| } | |
| *ptail = (tail + slice->nents) % dbc->nelem; | |
| return 0; | |
| } | |
| static inline int copy_partial_exec_reqs(struct qaic_device *qdev, struct bo_slice *slice, | |
| u64 resize, struct dma_bridge_chan *dbc, u32 head, | |
| u32 *ptail) | |
| { | |
| struct dbc_req *reqs = slice->reqs; | |
| struct dbc_req *last_req; | |
| u32 tail = *ptail; | |
| u64 last_bytes; | |
| u32 first_n; | |
| u32 avail; | |
| avail = fifo_space_avail(head, tail, dbc->nelem); | |
| /* | |
| * After this for loop is complete, first_n represents the index | |
| * of the last DMA request of this slice that needs to be | |
| * transferred after resizing and last_bytes represents DMA size | |
| * of that request. | |
| */ | |
| last_bytes = resize; | |
| for (first_n = 0; first_n < slice->nents; first_n++) | |
| if (last_bytes > le32_to_cpu(reqs[first_n].len)) | |
| last_bytes -= le32_to_cpu(reqs[first_n].len); | |
| else | |
| break; | |
| if (avail < (first_n + 1)) | |
| return -EAGAIN; | |
| if (first_n) { | |
| if (tail + first_n > dbc->nelem) { | |
| avail = dbc->nelem - tail; | |
| avail = min_t(u32, avail, first_n); | |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * avail); | |
| last_req = reqs + avail; | |
| avail = first_n - avail; | |
| if (avail) | |
| memcpy(dbc->req_q_base, last_req, sizeof(*reqs) * avail); | |
| } else { | |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * first_n); | |
| } | |
| } | |
| /* | |
| * Copy over the last entry. Here we need to adjust len to the left over | |
| * size, and set src and dst to the entry it is copied to. | |
| */ | |
| last_req = fifo_at(dbc->req_q_base, (tail + first_n) % dbc->nelem); | |
| memcpy(last_req, reqs + slice->nents - 1, sizeof(*reqs)); | |
| /* | |
| * last_bytes holds size of a DMA segment, maximum DMA segment size is | |
| * set to UINT_MAX by qaic and hence last_bytes can never exceed u32 | |
| * range. So, by down sizing we are not corrupting the value. | |
| */ | |
| last_req->len = cpu_to_le32((u32)last_bytes); | |
| last_req->src_addr = reqs[first_n].src_addr; | |
| last_req->dest_addr = reqs[first_n].dest_addr; | |
| if (!last_bytes) | |
| /* Disable DMA transfer */ | |
| last_req->cmd = GENMASK(7, 2) & reqs[first_n].cmd; | |
| *ptail = (tail + first_n + 1) % dbc->nelem; | |
| return 0; | |
| } | |
| static int send_bo_list_to_device(struct qaic_device *qdev, struct drm_file *file_priv, | |
| struct qaic_execute_entry *exec, unsigned int count, | |
| bool is_partial, struct dma_bridge_chan *dbc, u32 head, | |
| u32 *tail) | |
| { | |
| struct qaic_partial_execute_entry *pexec = (struct qaic_partial_execute_entry *)exec; | |
| struct drm_gem_object *obj; | |
| struct bo_slice *slice; | |
| unsigned long flags; | |
| struct qaic_bo *bo; | |
| int i, j; | |
| int ret; | |
| for (i = 0; i < count; i++) { | |
| /* | |
| * ref count will be decremented when the transfer of this | |
| * buffer is complete. It is inside dbc_irq_threaded_fn(). | |
| */ | |
| obj = drm_gem_object_lookup(file_priv, | |
| is_partial ? pexec[i].handle : exec[i].handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto failed_to_send_bo; | |
| } | |
| bo = to_qaic_bo(obj); | |
| ret = mutex_lock_interruptible(&bo->lock); | |
| if (ret) | |
| goto failed_to_send_bo; | |
| if (!bo->sliced) { | |
| ret = -EINVAL; | |
| goto unlock_bo; | |
| } | |
| if (is_partial && pexec[i].resize > bo->base.size) { | |
| ret = -EINVAL; | |
| goto unlock_bo; | |
| } | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| if (bo_queued(bo)) { | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| ret = -EINVAL; | |
| goto unlock_bo; | |
| } | |
| bo->req_id = dbc->next_req_id++; | |
| list_for_each_entry(slice, &bo->slices, slice) { | |
| for (j = 0; j < slice->nents; j++) | |
| slice->reqs[j].req_id = cpu_to_le16(bo->req_id); | |
| if (is_partial && (!pexec[i].resize || pexec[i].resize <= slice->offset)) | |
| /* Configure the slice for no DMA transfer */ | |
| ret = copy_partial_exec_reqs(qdev, slice, 0, dbc, head, tail); | |
| else if (is_partial && pexec[i].resize < slice->offset + slice->size) | |
| /* Configure the slice to be partially DMA transferred */ | |
| ret = copy_partial_exec_reqs(qdev, slice, | |
| pexec[i].resize - slice->offset, dbc, | |
| head, tail); | |
| else | |
| ret = copy_exec_reqs(qdev, slice, dbc->id, head, tail); | |
| if (ret) { | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| goto unlock_bo; | |
| } | |
| } | |
| reinit_completion(&bo->xfer_done); | |
| list_add_tail(&bo->xfer_list, &dbc->xfer_list); | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| dma_sync_sgtable_for_device(&qdev->pdev->dev, bo->sgt, bo->dir); | |
| mutex_unlock(&bo->lock); | |
| } | |
| return 0; | |
| unlock_bo: | |
| mutex_unlock(&bo->lock); | |
| failed_to_send_bo: | |
| if (likely(obj)) | |
| drm_gem_object_put(obj); | |
| for (j = 0; j < i; j++) { | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| bo = list_last_entry(&dbc->xfer_list, struct qaic_bo, xfer_list); | |
| obj = &bo->base; | |
| list_del_init(&bo->xfer_list); | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); | |
| drm_gem_object_put(obj); | |
| } | |
| return ret; | |
| } | |
| static void update_profiling_data(struct drm_file *file_priv, | |
| struct qaic_execute_entry *exec, unsigned int count, | |
| bool is_partial, u64 received_ts, u64 submit_ts, u32 queue_level) | |
| { | |
| struct qaic_partial_execute_entry *pexec = (struct qaic_partial_execute_entry *)exec; | |
| struct drm_gem_object *obj; | |
| struct qaic_bo *bo; | |
| int i; | |
| for (i = 0; i < count; i++) { | |
| /* | |
| * Since we already committed the BO to hardware, the only way | |
| * this should fail is a pending signal. We can't cancel the | |
| * submit to hardware, so we have to just skip the profiling | |
| * data. In case the signal is not fatal to the process, we | |
| * return success so that the user doesn't try to resubmit. | |
| */ | |
| obj = drm_gem_object_lookup(file_priv, | |
| is_partial ? pexec[i].handle : exec[i].handle); | |
| if (!obj) | |
| break; | |
| bo = to_qaic_bo(obj); | |
| bo->perf_stats.req_received_ts = received_ts; | |
| bo->perf_stats.req_submit_ts = submit_ts; | |
| bo->perf_stats.queue_level_before = queue_level; | |
| queue_level += bo->total_slice_nents; | |
| drm_gem_object_put(obj); | |
| } | |
| } | |
| static int __qaic_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv, | |
| bool is_partial) | |
| { | |
| struct qaic_execute *args = data; | |
| struct qaic_execute_entry *exec; | |
| struct dma_bridge_chan *dbc; | |
| int usr_rcu_id, qdev_rcu_id; | |
| struct qaic_device *qdev; | |
| struct qaic_user *usr; | |
| u64 received_ts; | |
| u32 queue_level; | |
| u64 submit_ts; | |
| int rcu_id; | |
| u32 head; | |
| u32 tail; | |
| u64 size; | |
| int ret; | |
| received_ts = ktime_get_ns(); | |
| size = is_partial ? sizeof(struct qaic_partial_execute_entry) : sizeof(*exec); | |
| if (args->hdr.count == 0) | |
| return -EINVAL; | |
| exec = memdup_array_user(u64_to_user_ptr(args->data), args->hdr.count, size); | |
| if (IS_ERR(exec)) | |
| return PTR_ERR(exec); | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| if (args->hdr.dbc_id >= qdev->num_dbc) { | |
| ret = -EINVAL; | |
| goto unlock_dev_srcu; | |
| } | |
| dbc = &qdev->dbc[args->hdr.dbc_id]; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| if (!dbc->usr || dbc->usr->handle != usr->handle) { | |
| ret = -EPERM; | |
| goto release_ch_rcu; | |
| } | |
| if (dbc->id == qdev->ssr_dbc) { | |
| ret = -EPIPE; | |
| goto release_ch_rcu; | |
| } | |
| ret = mutex_lock_interruptible(&dbc->req_lock); | |
| if (ret) | |
| goto release_ch_rcu; | |
| head = readl(dbc->dbc_base + REQHP_OFF); | |
| tail = readl(dbc->dbc_base + REQTP_OFF); | |
| if (head == U32_MAX || tail == U32_MAX) { | |
| /* PCI link error */ | |
| ret = -ENODEV; | |
| goto unlock_req_lock; | |
| } | |
| queue_level = head <= tail ? tail - head : dbc->nelem - (head - tail); | |
| ret = send_bo_list_to_device(qdev, file_priv, exec, args->hdr.count, is_partial, dbc, | |
| head, &tail); | |
| if (ret) | |
| goto unlock_req_lock; | |
| /* Finalize commit to hardware */ | |
| submit_ts = ktime_get_ns(); | |
| writel(tail, dbc->dbc_base + REQTP_OFF); | |
| mutex_unlock(&dbc->req_lock); | |
| update_profiling_data(file_priv, exec, args->hdr.count, is_partial, received_ts, | |
| submit_ts, queue_level); | |
| if (datapath_polling) | |
| schedule_work(&dbc->poll_work); | |
| unlock_req_lock: | |
| if (ret) | |
| mutex_unlock(&dbc->req_lock); | |
| release_ch_rcu: | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| kfree(exec); | |
| return ret; | |
| } | |
| int qaic_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| return __qaic_execute_bo_ioctl(dev, data, file_priv, false); | |
| } | |
| int qaic_partial_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| return __qaic_execute_bo_ioctl(dev, data, file_priv, true); | |
| } | |
| /* | |
| * Our interrupt handling is a bit more complicated than a simple ideal, but | |
| * sadly necessary. | |
| * | |
| * Each dbc has a completion queue. Entries in the queue correspond to DMA | |
| * requests which the device has processed. The hardware already has a built | |
| * in irq mitigation. When the device puts an entry into the queue, it will | |
| * only trigger an interrupt if the queue was empty. Therefore, when adding | |
| * the Nth event to a non-empty queue, the hardware doesn't trigger an | |
| * interrupt. This means the host doesn't get additional interrupts signaling | |
| * the same thing - the queue has something to process. | |
| * This behavior can be overridden in the DMA request. | |
| * This means that when the host receives an interrupt, it is required to | |
| * drain the queue. | |
| * | |
| * This behavior is what NAPI attempts to accomplish, although we can't use | |
| * NAPI as we don't have a netdev. We use threaded irqs instead. | |
| * | |
| * However, there is a situation where the host drains the queue fast enough | |
| * that every event causes an interrupt. Typically this is not a problem as | |
| * the rate of events would be low. However, that is not the case with | |
| * lprnet for example. On an Intel Xeon D-2191 where we run 8 instances of | |
| * lprnet, the host receives roughly 80k interrupts per second from the device | |
| * (per /proc/interrupts). While NAPI documentation indicates the host should | |
| * just chug along, sadly that behavior causes instability in some hosts. | |
| * | |
| * Therefore, we implement an interrupt disable scheme similar to NAPI. The | |
| * key difference is that we will delay after draining the queue for a small | |
| * time to allow additional events to come in via polling. Using the above | |
| * lprnet workload, this reduces the number of interrupts processed from | |
| * ~80k/sec to about 64 in 5 minutes and appears to solve the system | |
| * instability. | |
| */ | |
| irqreturn_t dbc_irq_handler(int irq, void *data) | |
| { | |
| struct dma_bridge_chan *dbc = data; | |
| int rcu_id; | |
| u32 head; | |
| u32 tail; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| if (datapath_polling) { | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| /* | |
| * Normally datapath_polling will not have irqs enabled, but | |
| * when running with only one MSI the interrupt is shared with | |
| * MHI so it cannot be disabled. Return ASAP instead. | |
| */ | |
| return IRQ_HANDLED; | |
| } | |
| if (!dbc->usr) { | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_HANDLED; | |
| } | |
| head = readl(dbc->dbc_base + RSPHP_OFF); | |
| if (head == U32_MAX) { /* PCI link error */ | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_NONE; | |
| } | |
| tail = readl(dbc->dbc_base + RSPTP_OFF); | |
| if (tail == U32_MAX) { /* PCI link error */ | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_NONE; | |
| } | |
| if (head == tail) { /* queue empty */ | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_NONE; | |
| } | |
| if (!dbc->qdev->single_msi) | |
| disable_irq_nosync(irq); | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_WAKE_THREAD; | |
| } | |
| void qaic_irq_polling_work(struct work_struct *work) | |
| { | |
| struct dma_bridge_chan *dbc = container_of(work, struct dma_bridge_chan, poll_work); | |
| unsigned long flags; | |
| int rcu_id; | |
| u32 head; | |
| u32 tail; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| while (1) { | |
| if (dbc->qdev->dev_state != QAIC_ONLINE) { | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| if (!dbc->usr) { | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| if (list_empty(&dbc->xfer_list)) { | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| head = readl(dbc->dbc_base + RSPHP_OFF); | |
| if (head == U32_MAX) { /* PCI link error */ | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| tail = readl(dbc->dbc_base + RSPTP_OFF); | |
| if (tail == U32_MAX) { /* PCI link error */ | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| if (head != tail) { | |
| irq_wake_thread(dbc->irq, dbc); | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return; | |
| } | |
| cond_resched(); | |
| usleep_range(datapath_poll_interval_us, 2 * datapath_poll_interval_us); | |
| } | |
| } | |
| irqreturn_t dbc_irq_threaded_fn(int irq, void *data) | |
| { | |
| struct dma_bridge_chan *dbc = data; | |
| int event_count = NUM_EVENTS; | |
| int delay_count = NUM_DELAYS; | |
| struct qaic_device *qdev; | |
| struct qaic_bo *bo, *i; | |
| struct dbc_rsp *rsp; | |
| unsigned long flags; | |
| int rcu_id; | |
| u16 status; | |
| u16 req_id; | |
| u32 head; | |
| u32 tail; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| qdev = dbc->qdev; | |
| head = readl(dbc->dbc_base + RSPHP_OFF); | |
| if (head == U32_MAX) /* PCI link error */ | |
| goto error_out; | |
| read_fifo: | |
| if (!event_count) { | |
| event_count = NUM_EVENTS; | |
| cond_resched(); | |
| } | |
| /* | |
| * if this channel isn't assigned or gets unassigned during processing | |
| * we have nothing further to do | |
| */ | |
| if (!dbc->usr) | |
| goto error_out; | |
| tail = readl(dbc->dbc_base + RSPTP_OFF); | |
| if (tail == U32_MAX) /* PCI link error */ | |
| goto error_out; | |
| if (head == tail) { /* queue empty */ | |
| if (delay_count) { | |
| --delay_count; | |
| usleep_range(100, 200); | |
| goto read_fifo; /* check for a new event */ | |
| } | |
| goto normal_out; | |
| } | |
| delay_count = NUM_DELAYS; | |
| while (head != tail) { | |
| if (!event_count) | |
| break; | |
| --event_count; | |
| rsp = dbc->rsp_q_base + head * sizeof(*rsp); | |
| req_id = le16_to_cpu(rsp->req_id); | |
| status = le16_to_cpu(rsp->status); | |
| if (status) | |
| pci_dbg(qdev->pdev, "req_id %d failed with status %d\n", req_id, status); | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| /* | |
| * A BO can receive multiple interrupts, since a BO can be | |
| * divided into multiple slices and a buffer receives as many | |
| * interrupts as slices. So until it receives interrupts for | |
| * all the slices we cannot mark that buffer complete. | |
| */ | |
| list_for_each_entry_safe(bo, i, &dbc->xfer_list, xfer_list) { | |
| if (bo->req_id == req_id) | |
| bo->nr_slice_xfer_done++; | |
| else | |
| continue; | |
| if (bo->nr_slice_xfer_done < bo->nr_slice) | |
| break; | |
| /* | |
| * At this point we have received all the interrupts for | |
| * BO, which means BO execution is complete. | |
| */ | |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); | |
| bo->nr_slice_xfer_done = 0; | |
| list_del_init(&bo->xfer_list); | |
| bo->perf_stats.req_processed_ts = ktime_get_ns(); | |
| complete_all(&bo->xfer_done); | |
| drm_gem_object_put(&bo->base); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| head = (head + 1) % dbc->nelem; | |
| } | |
| /* | |
| * Update the head pointer of response queue and let the device know | |
| * that we have consumed elements from the queue. | |
| */ | |
| writel(head, dbc->dbc_base + RSPHP_OFF); | |
| /* elements might have been put in the queue while we were processing */ | |
| goto read_fifo; | |
| normal_out: | |
| if (!qdev->single_msi && likely(!datapath_polling)) | |
| enable_irq(irq); | |
| else if (unlikely(datapath_polling)) | |
| schedule_work(&dbc->poll_work); | |
| /* checking the fifo and enabling irqs is a race, missed event check */ | |
| tail = readl(dbc->dbc_base + RSPTP_OFF); | |
| if (tail != U32_MAX && head != tail) { | |
| if (!qdev->single_msi && likely(!datapath_polling)) | |
| disable_irq_nosync(irq); | |
| goto read_fifo; | |
| } | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| return IRQ_HANDLED; | |
| error_out: | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| if (!qdev->single_msi && likely(!datapath_polling)) | |
| enable_irq(irq); | |
| else if (unlikely(datapath_polling)) | |
| schedule_work(&dbc->poll_work); | |
| return IRQ_HANDLED; | |
| } | |
| int qaic_wait_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_wait *args = data; | |
| int usr_rcu_id, qdev_rcu_id; | |
| struct dma_bridge_chan *dbc; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| unsigned long timeout; | |
| struct qaic_user *usr; | |
| struct qaic_bo *bo; | |
| int rcu_id; | |
| int ret; | |
| if (args->pad != 0) | |
| return -EINVAL; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| if (args->dbc_id >= qdev->num_dbc) { | |
| ret = -EINVAL; | |
| goto unlock_dev_srcu; | |
| } | |
| dbc = &qdev->dbc[args->dbc_id]; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| if (dbc->usr != usr) { | |
| ret = -EPERM; | |
| goto unlock_ch_srcu; | |
| } | |
| if (dbc->id == qdev->ssr_dbc) { | |
| ret = -EPIPE; | |
| goto unlock_ch_srcu; | |
| } | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto unlock_ch_srcu; | |
| } | |
| bo = to_qaic_bo(obj); | |
| timeout = args->timeout ? args->timeout : wait_exec_default_timeout_ms; | |
| timeout = msecs_to_jiffies(timeout); | |
| ret = wait_for_completion_interruptible_timeout(&bo->xfer_done, timeout); | |
| if (!ret) { | |
| ret = -ETIMEDOUT; | |
| goto put_obj; | |
| } | |
| if (ret > 0) | |
| ret = 0; | |
| if (!dbc->usr) | |
| ret = -EPERM; | |
| if (dbc->id == qdev->ssr_dbc) | |
| ret = -EPIPE; | |
| put_obj: | |
| drm_gem_object_put(obj); | |
| unlock_ch_srcu: | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| int qaic_perf_stats_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_perf_stats_entry *ent = NULL; | |
| struct qaic_perf_stats *args = data; | |
| int usr_rcu_id, qdev_rcu_id; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| struct qaic_user *usr; | |
| struct qaic_bo *bo; | |
| int ret = 0; | |
| int i; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| if (args->hdr.dbc_id >= qdev->num_dbc) { | |
| ret = -EINVAL; | |
| goto unlock_dev_srcu; | |
| } | |
| ent = memdup_array_user(u64_to_user_ptr(args->data), args->hdr.count, sizeof(*ent)); | |
| if (IS_ERR(ent)) { | |
| ret = PTR_ERR(ent); | |
| goto unlock_dev_srcu; | |
| } | |
| for (i = 0; i < args->hdr.count; i++) { | |
| obj = drm_gem_object_lookup(file_priv, ent[i].handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto free_ent; | |
| } | |
| bo = to_qaic_bo(obj); | |
| if (!bo->sliced) { | |
| drm_gem_object_put(obj); | |
| ret = -EINVAL; | |
| goto free_ent; | |
| } | |
| if (bo->dbc->id != args->hdr.dbc_id) { | |
| drm_gem_object_put(obj); | |
| ret = -EINVAL; | |
| goto free_ent; | |
| } | |
| /* | |
| * perf stats ioctl is called before wait ioctl is complete then | |
| * the latency information is invalid. | |
| */ | |
| if (bo->perf_stats.req_processed_ts < bo->perf_stats.req_submit_ts) { | |
| ent[i].device_latency_us = 0; | |
| } else { | |
| ent[i].device_latency_us = div_u64((bo->perf_stats.req_processed_ts - | |
| bo->perf_stats.req_submit_ts), 1000); | |
| } | |
| ent[i].submit_latency_us = div_u64((bo->perf_stats.req_submit_ts - | |
| bo->perf_stats.req_received_ts), 1000); | |
| ent[i].queue_level_before = bo->perf_stats.queue_level_before; | |
| ent[i].num_queue_element = bo->total_slice_nents; | |
| drm_gem_object_put(obj); | |
| } | |
| if (copy_to_user(u64_to_user_ptr(args->data), ent, args->hdr.count * sizeof(*ent))) | |
| ret = -EFAULT; | |
| free_ent: | |
| kfree(ent); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| static void detach_slice_bo(struct qaic_device *qdev, struct qaic_bo *bo) | |
| { | |
| qaic_free_slices_bo(bo); | |
| qaic_unprepare_bo(qdev, bo); | |
| qaic_init_bo(bo, true); | |
| list_del(&bo->bo_list); | |
| drm_gem_object_put(&bo->base); | |
| } | |
| int qaic_detach_slice_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) | |
| { | |
| struct qaic_detach_slice *args = data; | |
| int rcu_id, usr_rcu_id, qdev_rcu_id; | |
| struct dma_bridge_chan *dbc; | |
| struct drm_gem_object *obj; | |
| struct qaic_device *qdev; | |
| struct qaic_user *usr; | |
| unsigned long flags; | |
| struct qaic_bo *bo; | |
| int ret; | |
| if (args->pad != 0) | |
| return -EINVAL; | |
| usr = file_priv->driver_priv; | |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); | |
| if (!usr->qddev) { | |
| ret = -ENODEV; | |
| goto unlock_usr_srcu; | |
| } | |
| qdev = usr->qddev->qdev; | |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); | |
| if (qdev->dev_state != QAIC_ONLINE) { | |
| ret = -ENODEV; | |
| goto unlock_dev_srcu; | |
| } | |
| obj = drm_gem_object_lookup(file_priv, args->handle); | |
| if (!obj) { | |
| ret = -ENOENT; | |
| goto unlock_dev_srcu; | |
| } | |
| bo = to_qaic_bo(obj); | |
| ret = mutex_lock_interruptible(&bo->lock); | |
| if (ret) | |
| goto put_bo; | |
| if (!bo->sliced) { | |
| ret = -EINVAL; | |
| goto unlock_bo; | |
| } | |
| dbc = bo->dbc; | |
| rcu_id = srcu_read_lock(&dbc->ch_lock); | |
| if (dbc->usr != usr) { | |
| ret = -EINVAL; | |
| goto unlock_ch_srcu; | |
| } | |
| /* Check if BO is committed to H/W for DMA */ | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| if (bo_queued(bo)) { | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| ret = -EBUSY; | |
| goto unlock_ch_srcu; | |
| } | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| detach_slice_bo(qdev, bo); | |
| unlock_ch_srcu: | |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); | |
| unlock_bo: | |
| mutex_unlock(&bo->lock); | |
| put_bo: | |
| drm_gem_object_put(obj); | |
| unlock_dev_srcu: | |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); | |
| unlock_usr_srcu: | |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); | |
| return ret; | |
| } | |
| static void empty_xfer_list(struct qaic_device *qdev, struct dma_bridge_chan *dbc) | |
| { | |
| unsigned long flags; | |
| struct qaic_bo *bo; | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| while (!list_empty(&dbc->xfer_list)) { | |
| bo = list_first_entry(&dbc->xfer_list, typeof(*bo), xfer_list); | |
| list_del_init(&bo->xfer_list); | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| bo->nr_slice_xfer_done = 0; | |
| bo->req_id = 0; | |
| bo->perf_stats.req_received_ts = 0; | |
| bo->perf_stats.req_submit_ts = 0; | |
| bo->perf_stats.req_processed_ts = 0; | |
| bo->perf_stats.queue_level_before = 0; | |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); | |
| complete_all(&bo->xfer_done); | |
| drm_gem_object_put(&bo->base); | |
| spin_lock_irqsave(&dbc->xfer_lock, flags); | |
| } | |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); | |
| } | |
| static void sync_empty_xfer_list(struct qaic_device *qdev, struct dma_bridge_chan *dbc) | |
| { | |
| empty_xfer_list(qdev, dbc); | |
| synchronize_srcu(&dbc->ch_lock); | |
| /* | |
| * Threads holding channel lock, may add more elements in the xfer_list. | |
| * Flush out these elements from xfer_list. | |
| */ | |
| empty_xfer_list(qdev, dbc); | |
| } | |
| int disable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr) | |
| { | |
| if (!qdev->dbc[dbc_id].usr || qdev->dbc[dbc_id].usr->handle != usr->handle) | |
| return -EPERM; | |
| qdev->dbc[dbc_id].usr = NULL; | |
| synchronize_srcu(&qdev->dbc[dbc_id].ch_lock); | |
| return 0; | |
| } | |
| /** | |
| * enable_dbc - Enable the DBC. DBCs are disabled by removing the context of | |
| * user. Add user context back to DBC to enable it. This function trusts the | |
| * DBC ID passed and expects the DBC to be disabled. | |
| * @qdev: qaic device handle | |
| * @dbc_id: ID of the DBC | |
| * @usr: User context | |
| */ | |
| void enable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr) | |
| { | |
| qdev->dbc[dbc_id].usr = usr; | |
| } | |
| void wakeup_dbc(struct qaic_device *qdev, u32 dbc_id) | |
| { | |
| struct dma_bridge_chan *dbc = &qdev->dbc[dbc_id]; | |
| dbc->usr = NULL; | |
| sync_empty_xfer_list(qdev, dbc); | |
| } | |
| void release_dbc(struct qaic_device *qdev, u32 dbc_id) | |
| { | |
| struct qaic_bo *bo, *bo_temp; | |
| struct dma_bridge_chan *dbc; | |
| dbc = &qdev->dbc[dbc_id]; | |
| if (!dbc->in_use) | |
| return; | |
| wakeup_dbc(qdev, dbc_id); | |
| dma_free_coherent(&qdev->pdev->dev, dbc->total_size, dbc->req_q_base, dbc->dma_addr); | |
| dbc->total_size = 0; | |
| dbc->req_q_base = NULL; | |
| dbc->dma_addr = 0; | |
| dbc->nelem = 0; | |
| dbc->usr = NULL; | |
| list_for_each_entry_safe(bo, bo_temp, &dbc->bo_lists, bo_list) { | |
| drm_gem_object_get(&bo->base); | |
| mutex_lock(&bo->lock); | |
| detach_slice_bo(qdev, bo); | |
| mutex_unlock(&bo->lock); | |
| drm_gem_object_put(&bo->base); | |
| } | |
| dbc->in_use = false; | |
| wake_up(&dbc->dbc_release); | |
| } | |
| void qaic_data_get_fifo_info(struct dma_bridge_chan *dbc, u32 *head, u32 *tail) | |
| { | |
| if (!dbc || !head || !tail) | |
| return; | |
| *head = readl(dbc->dbc_base + REQHP_OFF); | |
| *tail = readl(dbc->dbc_base + REQTP_OFF); | |
| } | |
| /* | |
| * qaic_dbc_enter_ssr - Prepare to enter in sub system reset(SSR) for given DBC ID. | |
| * @qdev: qaic device handle | |
| * @dbc_id: ID of the DBC which will enter SSR | |
| * | |
| * The device will automatically deactivate the workload as not | |
| * all errors can be silently recovered. The user will be | |
| * notified and will need to decide the required recovery | |
| * action to take. | |
| */ | |
| void qaic_dbc_enter_ssr(struct qaic_device *qdev, u32 dbc_id) | |
| { | |
| qdev->ssr_dbc = dbc_id; | |
| release_dbc(qdev, dbc_id); | |
| } | |
| /* | |
| * qaic_dbc_exit_ssr - Prepare to exit from sub system reset(SSR) for given DBC ID. | |
| * @qdev: qaic device handle | |
| * | |
| * The DBC returns to an operational state and begins accepting work after exiting SSR. | |
| */ | |
| void qaic_dbc_exit_ssr(struct qaic_device *qdev) | |
| { | |
| qdev->ssr_dbc = QAIC_SSR_DBC_SENTINEL; | |
| } |