| // SPDX-License-Identifier: GPL-2.0 | |
| // SPDX-FileCopyrightText: Copyright (c) 2026 NVIDIA CORPORATION & AFFILIATES. All rights reserved. | |
| //! FSP (Foundation Security Processor) interface for Hopper/Blackwell GPUs. | |
| //! | |
| //! Hopper/Blackwell use a simplified firmware boot sequence: FMC, then FSP, then GSP. | |
| //! Unlike Turing/Ampere/Ada, there is no SEC2 (Security Engine 2) usage. | |
| //! FSP handles secure boot directly using FMC firmware and Chain of Trust. | |
| use kernel::{ | |
| device, | |
| dma::Coherent, | |
| io::poll::read_poll_timeout, | |
| prelude::*, | |
| ptr::{ | |
| Alignable, | |
| Alignment, // | |
| }, | |
| sizes::SZ_2M, | |
| time::Delta, | |
| transmute::{ | |
| AsBytes, | |
| FromBytes, // | |
| }, | |
| }; | |
| use crate::{ | |
| driver::Bar0, | |
| falcon::{ | |
| fsp::Fsp as FspEngine, | |
| Falcon, // | |
| }, | |
| fb::FbLayout, | |
| firmware::fsp::{ | |
| FmcSignatures, | |
| FspFirmware, // | |
| }, | |
| gpu::Chipset, | |
| gsp::GspFmcBootParams, | |
| mctp::{ | |
| MctpHeader, | |
| NvdmHeader, | |
| NvdmType, // | |
| }, | |
| num, | |
| regs, // | |
| }; | |
| mod hal; | |
| /// FSP command response payload (`NVDM_PAYLOAD_COMMAND_RESPONSE`). | |
| #[repr(C, packed)] | |
| #[derive(Clone, Copy)] | |
| struct NvdmPayloadCommandResponse { | |
| task_id: u32, | |
| command_nvdm_type: u32, | |
| error_code: u32, | |
| } | |
| /// Complete FSP response structure with MCTP and NVDM headers. | |
| #[repr(C, packed)] | |
| #[derive(Clone, Copy)] | |
| struct FspResponse { | |
| mctp_header: MctpHeader, | |
| nvdm_header: NvdmHeader, | |
| response: NvdmPayloadCommandResponse, | |
| } | |
| // SAFETY: FspResponse is a packed C struct with only integral fields. | |
| unsafe impl FromBytes for FspResponse {} | |
| /// Trait implemented by types representing a message to send to FSP. | |
| /// | |
| /// This provides [`Fsp::send_sync_fsp`] with the information it needs to send | |
| /// a given message, following the same pattern as GSP's `CommandToGsp`. | |
| trait MessageToFsp: AsBytes { | |
| /// NVDM type identifying this message to FSP. | |
| const NVDM_TYPE: NvdmType; | |
| } | |
| /// NVDM (NVIDIA Data Model) CoT (Chain of Trust) payload, the main | |
| /// message body sent to FSP for Chain of Trust boot. | |
| #[repr(C, packed)] | |
| #[derive(Clone, Copy, Zeroable)] | |
| struct NvdmPayloadCot { | |
| version: u16, | |
| size: u16, | |
| gsp_fmc_sysmem_offset: u64, | |
| frts_sysmem_offset: u64, | |
| frts_sysmem_size: u32, | |
| frts_vidmem_offset: u64, | |
| frts_vidmem_size: u32, | |
| sigs: FmcSignatures, | |
| gsp_boot_args_sysmem_offset: u64, | |
| } | |
| /// Complete FSP message structure with MCTP and NVDM headers. | |
| #[repr(C)] | |
| #[derive(Clone, Copy)] | |
| struct FspMessage { | |
| mctp_header: MctpHeader, | |
| nvdm_header: NvdmHeader, | |
| cot: NvdmPayloadCot, | |
| } | |
| impl FspMessage { | |
| /// Returns an in-place initializer for [`FspMessage`]. | |
| fn new<'a>( | |
| fb_layout: &FbLayout, | |
| fsp_fw: &'a FspFirmware, | |
| args: &'a FmcBootArgs, | |
| ) -> Result<impl Init<Self> + 'a> { | |
| // frts_offset is relative to FB end: FRTS_location = FB_END - frts_offset | |
| let frts_vidmem_offset = if !args.resume { | |
| let frts_reserved_size = fb_layout.heap.len() + u64::from(fb_layout.pmu_reserved_size); | |
| frts_reserved_size | |
| .align_up(Alignment::new::<SZ_2M>()) | |
| .ok_or(EINVAL)? | |
| } else { | |
| 0 | |
| }; | |
| let frts_size: u32 = if !args.resume { | |
| fb_layout.frts.len().try_into()? | |
| } else { | |
| 0 | |
| }; | |
| let version = hal::fsp_hal(args.chipset).ok_or(ENOTSUPP)?.cot_version(); | |
| let size = num::usize_into_u16::<{ core::mem::size_of::<NvdmPayloadCot>() }>(); | |
| Ok(init!(Self { | |
| mctp_header: MctpHeader::single_packet(), | |
| nvdm_header: NvdmHeader::new(NvdmType::Cot), | |
| // The payload is packed, so we cannot use `init!`. Initialize it member-by-member using | |
| // `chain`. | |
| cot <- pin_init::init_zeroed(), | |
| }) | |
| .chain(move |msg| { | |
| msg.cot.version = version; | |
| msg.cot.size = size; | |
| msg.cot.gsp_fmc_sysmem_offset = fsp_fw.fmc_image.dma_handle(); | |
| msg.cot.frts_vidmem_offset = frts_vidmem_offset; | |
| msg.cot.frts_vidmem_size = frts_size; | |
| // frts_sysmem_* intentionally left at zero for now, but will be needed for e.g. | |
| // systems without VRAM. | |
| msg.cot.gsp_boot_args_sysmem_offset = args.fmc_boot_params.dma_handle(); | |
| msg.cot.sigs = *fsp_fw.fmc_sigs; | |
| Ok(()) | |
| })) | |
| } | |
| } | |
| // SAFETY: `FspMessage` is `#[repr(C)]` with no padding, so all of its | |
| // bytes are initialized. | |
| unsafe impl AsBytes for FspMessage {} | |
| impl MessageToFsp for FspMessage { | |
| const NVDM_TYPE: NvdmType = NvdmType::Cot; | |
| } | |
| /// Bundled arguments for FMC boot via FSP Chain of Trust. | |
| pub(crate) struct FmcBootArgs { | |
| chipset: Chipset, | |
| fmc_boot_params: Coherent<GspFmcBootParams>, | |
| resume: bool, | |
| } | |
| impl FmcBootArgs { | |
| /// Builds FMC boot arguments, allocating the DMA-coherent boot parameter | |
| /// structure that FSP will read. | |
| pub(crate) fn new( | |
| dev: &device::Device<device::Bound>, | |
| chipset: Chipset, | |
| wpr_meta_addr: u64, | |
| libos_addr: u64, | |
| resume: bool, | |
| ) -> Result<Self> { | |
| let init = GspFmcBootParams::new(wpr_meta_addr, libos_addr); | |
| Ok(Self { | |
| chipset, | |
| fmc_boot_params: Coherent::<GspFmcBootParams>::init(dev, GFP_KERNEL, init)?, | |
| resume, | |
| }) | |
| } | |
| /// DMA address of the FMC boot parameters, needed after boot for lockdown | |
| /// release polling. | |
| pub(crate) fn boot_params_dma_handle(&self) -> u64 { | |
| self.fmc_boot_params.dma_handle() | |
| } | |
| } | |
| /// FSP interface for Hopper/Blackwell GPUs. | |
| /// | |
| /// An `Fsp` is produced by [`Fsp::wait_secure_boot`], which only returns once FSP secure boot | |
| /// has completed. It owns the FSP falcon and the FMC firmware, which are used for the subsequent | |
| /// Chain of Trust boot. | |
| pub(crate) struct Fsp { | |
| falcon: Falcon<FspEngine>, | |
| fsp_fw: FspFirmware, | |
| } | |
| impl Fsp { | |
| /// Waits for FSP secure boot completion, then returns the [`Fsp`] interface. | |
| /// | |
| /// Polls the thermal scratch register until FSP signals boot completion or the timeout | |
| /// elapses. Returning an [`Fsp`] only on success guarantees, at the API level, that the | |
| /// interface is not used before secure boot has completed. | |
| pub(crate) fn wait_secure_boot( | |
| dev: &device::Device<device::Bound>, | |
| bar: Bar0<'_>, | |
| chipset: Chipset, | |
| fsp_fw: FspFirmware, | |
| ) -> Result<Fsp> { | |
| /// FSP secure boot completion timeout in milliseconds. | |
| const FSP_SECURE_BOOT_TIMEOUT_MS: i64 = 5000; | |
| let hal = hal::fsp_hal(chipset).ok_or(ENOTSUPP)?; | |
| let falcon = Falcon::<FspEngine>::new(dev, chipset)?; | |
| read_poll_timeout( | |
| || Ok(hal.fsp_boot_status(bar)), | |
| |&status| status == regs::NV_THERM_I2CS_SCRATCH_FSP_BOOT_COMPLETE_STATUS_SUCCESS, | |
| Delta::from_millis(10), | |
| Delta::from_millis(FSP_SECURE_BOOT_TIMEOUT_MS), | |
| ) | |
| .inspect_err(|e| { | |
| dev_err!(dev, "FSP secure boot completion error: {:?}\n", e); | |
| })?; | |
| Ok(Fsp { falcon, fsp_fw }) | |
| } | |
| /// Sends a message to FSP and waits for the response. | |
| fn send_sync_fsp<M>(&mut self, dev: &device::Device, bar: Bar0<'_>, msg: &M) -> Result | |
| where | |
| M: MessageToFsp, | |
| { | |
| self.falcon.send_msg(bar, msg.as_bytes())?; | |
| let response_buf = self.falcon.recv_msg(bar).inspect_err(|e| { | |
| dev_err!(dev, "FSP response error: {:?}\n", e); | |
| })?; | |
| let (response, _) = FspResponse::from_bytes_prefix(&response_buf[..]).ok_or_else(|| { | |
| dev_err!(dev, "FSP response too small: {}\n", response_buf.len()); | |
| EIO | |
| })?; | |
| let mctp_header = response.mctp_header; | |
| let nvdm_header = response.nvdm_header; | |
| let command_nvdm_type = response.response.command_nvdm_type; | |
| let error_code = response.response.error_code; | |
| if !mctp_header.is_single_packet() { | |
| dev_err!( | |
| dev, | |
| "Unexpected MCTP header in FSP reply: {:x?}\n", | |
| mctp_header, | |
| ); | |
| return Err(EIO); | |
| } | |
| if !nvdm_header.validate(NvdmType::FspResponse) { | |
| dev_err!( | |
| dev, | |
| "Unexpected NVDM header in FSP reply: {:x?}\n", | |
| nvdm_header, | |
| ); | |
| return Err(EIO); | |
| } | |
| if command_nvdm_type != u8::from(M::NVDM_TYPE).into() { | |
| dev_err!( | |
| dev, | |
| "Expected NVDM type {:?} in reply, got {:#x}\n", | |
| M::NVDM_TYPE, | |
| command_nvdm_type | |
| ); | |
| return Err(EIO); | |
| } | |
| if error_code != 0 { | |
| dev_err!( | |
| dev, | |
| "NVDM command {:?} failed with error {:#x}\n", | |
| M::NVDM_TYPE, | |
| error_code | |
| ); | |
| return Err(EIO); | |
| } | |
| Ok(()) | |
| } | |
| /// Boots GSP FMC via FSP Chain of Trust. | |
| /// | |
| /// Builds the CoT message from the pre-configured [`FmcBootArgs`], sends it | |
| /// to FSP, and waits for the response. | |
| pub(crate) fn boot_fmc( | |
| &mut self, | |
| dev: &device::Device<device::Bound>, | |
| bar: Bar0<'_>, | |
| fb_layout: &FbLayout, | |
| args: &FmcBootArgs, | |
| ) -> Result { | |
| dev_dbg!(dev, "Starting FSP boot sequence for {}\n", args.chipset); | |
| let msg = KBox::init(FspMessage::new(fb_layout, &self.fsp_fw, args)?, GFP_KERNEL)?; | |
| self.send_sync_fsp(dev, bar, &*msg)?; | |
| dev_dbg!(dev, "FSP Chain of Trust completed successfully\n"); | |
| Ok(()) | |
| } | |
| } |