| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Greybus interface code | |
| * | |
| * Copyright 2014 Google Inc. | |
| * Copyright 2014 Linaro Ltd. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/greybus.h> | |
| #include "greybus_trace.h" | |
| #define GB_INTERFACE_MODE_SWITCH_TIMEOUT 2000 | |
| #define GB_INTERFACE_DEVICE_ID_BAD 0xff | |
| #define GB_INTERFACE_AUTOSUSPEND_MS 3000 | |
| /* Time required for interface to enter standby before disabling REFCLK */ | |
| #define GB_INTERFACE_SUSPEND_HIBERNATE_DELAY_MS 20 | |
| /* Don't-care selector index */ | |
| #define DME_SELECTOR_INDEX_NULL 0 | |
| /* DME attributes */ | |
| /* FIXME: remove ES2 support and DME_T_TST_SRC_INCREMENT */ | |
| #define DME_T_TST_SRC_INCREMENT 0x4083 | |
| #define DME_DDBL1_MANUFACTURERID 0x5003 | |
| #define DME_DDBL1_PRODUCTID 0x5004 | |
| #define DME_TOSHIBA_GMP_VID 0x6000 | |
| #define DME_TOSHIBA_GMP_PID 0x6001 | |
| #define DME_TOSHIBA_GMP_SN0 0x6002 | |
| #define DME_TOSHIBA_GMP_SN1 0x6003 | |
| #define DME_TOSHIBA_GMP_INIT_STATUS 0x6101 | |
| /* DDBL1 Manufacturer and Product ids */ | |
| #define TOSHIBA_DMID 0x0126 | |
| #define TOSHIBA_ES2_BRIDGE_DPID 0x1000 | |
| #define TOSHIBA_ES3_APBRIDGE_DPID 0x1001 | |
| #define TOSHIBA_ES3_GBPHY_DPID 0x1002 | |
| static int gb_interface_hibernate_link(struct gb_interface *intf); | |
| static int gb_interface_refclk_set(struct gb_interface *intf, bool enable); | |
| static int gb_interface_dme_attr_get(struct gb_interface *intf, | |
| u16 attr, u32 *val) | |
| { | |
| return gb_svc_dme_peer_get(intf->hd->svc, intf->interface_id, | |
| attr, DME_SELECTOR_INDEX_NULL, val); | |
| } | |
| static int gb_interface_read_ara_dme(struct gb_interface *intf) | |
| { | |
| u32 sn0, sn1; | |
| int ret; | |
| /* | |
| * Unless this is a Toshiba bridge, bail out until we have defined | |
| * standard GMP attributes. | |
| */ | |
| if (intf->ddbl1_manufacturer_id != TOSHIBA_DMID) { | |
| dev_err(&intf->dev, "unknown manufacturer %08x\n", | |
| intf->ddbl1_manufacturer_id); | |
| return -ENODEV; | |
| } | |
| ret = gb_interface_dme_attr_get(intf, DME_TOSHIBA_GMP_VID, | |
| &intf->vendor_id); | |
| if (ret) | |
| return ret; | |
| ret = gb_interface_dme_attr_get(intf, DME_TOSHIBA_GMP_PID, | |
| &intf->product_id); | |
| if (ret) | |
| return ret; | |
| ret = gb_interface_dme_attr_get(intf, DME_TOSHIBA_GMP_SN0, &sn0); | |
| if (ret) | |
| return ret; | |
| ret = gb_interface_dme_attr_get(intf, DME_TOSHIBA_GMP_SN1, &sn1); | |
| if (ret) | |
| return ret; | |
| intf->serial_number = (u64)sn1 << 32 | sn0; | |
| return 0; | |
| } | |
| static int gb_interface_read_dme(struct gb_interface *intf) | |
| { | |
| int ret; | |
| /* DME attributes have already been read */ | |
| if (intf->dme_read) | |
| return 0; | |
| ret = gb_interface_dme_attr_get(intf, DME_DDBL1_MANUFACTURERID, | |
| &intf->ddbl1_manufacturer_id); | |
| if (ret) | |
| return ret; | |
| ret = gb_interface_dme_attr_get(intf, DME_DDBL1_PRODUCTID, | |
| &intf->ddbl1_product_id); | |
| if (ret) | |
| return ret; | |
| if (intf->ddbl1_manufacturer_id == TOSHIBA_DMID && | |
| intf->ddbl1_product_id == TOSHIBA_ES2_BRIDGE_DPID) { | |
| intf->quirks |= GB_INTERFACE_QUIRK_NO_GMP_IDS; | |
| intf->quirks |= GB_INTERFACE_QUIRK_NO_INIT_STATUS; | |
| } | |
| ret = gb_interface_read_ara_dme(intf); | |
| if (ret) | |
| return ret; | |
| intf->dme_read = true; | |
| return 0; | |
| } | |
| static int gb_interface_route_create(struct gb_interface *intf) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| u8 intf_id = intf->interface_id; | |
| u8 device_id; | |
| int ret; | |
| /* Allocate an interface device id. */ | |
| ret = ida_alloc_range(&svc->device_id_map, GB_SVC_DEVICE_ID_MIN, | |
| GB_SVC_DEVICE_ID_MAX, GFP_KERNEL); | |
| if (ret < 0) { | |
| dev_err(&intf->dev, "failed to allocate device id: %d\n", ret); | |
| return ret; | |
| } | |
| device_id = ret; | |
| ret = gb_svc_intf_device_id(svc, intf_id, device_id); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to set device id %u: %d\n", | |
| device_id, ret); | |
| goto err_ida_remove; | |
| } | |
| /* FIXME: Hard-coded AP device id. */ | |
| ret = gb_svc_route_create(svc, svc->ap_intf_id, GB_SVC_DEVICE_ID_AP, | |
| intf_id, device_id); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to create route: %d\n", ret); | |
| goto err_svc_id_free; | |
| } | |
| intf->device_id = device_id; | |
| return 0; | |
| err_svc_id_free: | |
| /* | |
| * XXX Should we tell SVC that this id doesn't belong to interface | |
| * XXX anymore. | |
| */ | |
| err_ida_remove: | |
| ida_free(&svc->device_id_map, device_id); | |
| return ret; | |
| } | |
| static void gb_interface_route_destroy(struct gb_interface *intf) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| if (intf->device_id == GB_INTERFACE_DEVICE_ID_BAD) | |
| return; | |
| gb_svc_route_destroy(svc, svc->ap_intf_id, intf->interface_id); | |
| ida_free(&svc->device_id_map, intf->device_id); | |
| intf->device_id = GB_INTERFACE_DEVICE_ID_BAD; | |
| } | |
| /* Locking: Caller holds the interface mutex. */ | |
| static int gb_interface_legacy_mode_switch(struct gb_interface *intf) | |
| { | |
| int ret; | |
| dev_info(&intf->dev, "legacy mode switch detected\n"); | |
| /* Mark as disconnected to prevent I/O during disable. */ | |
| intf->disconnected = true; | |
| gb_interface_disable(intf); | |
| intf->disconnected = false; | |
| ret = gb_interface_enable(intf); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to re-enable interface: %d\n", ret); | |
| gb_interface_deactivate(intf); | |
| } | |
| return ret; | |
| } | |
| void gb_interface_mailbox_event(struct gb_interface *intf, u16 result, | |
| u32 mailbox) | |
| { | |
| mutex_lock(&intf->mutex); | |
| if (result) { | |
| dev_warn(&intf->dev, | |
| "mailbox event with UniPro error: 0x%04x\n", | |
| result); | |
| goto err_disable; | |
| } | |
| if (mailbox != GB_SVC_INTF_MAILBOX_GREYBUS) { | |
| dev_warn(&intf->dev, | |
| "mailbox event with unexpected value: 0x%08x\n", | |
| mailbox); | |
| goto err_disable; | |
| } | |
| if (intf->quirks & GB_INTERFACE_QUIRK_LEGACY_MODE_SWITCH) { | |
| gb_interface_legacy_mode_switch(intf); | |
| goto out_unlock; | |
| } | |
| if (!intf->mode_switch) { | |
| dev_warn(&intf->dev, "unexpected mailbox event: 0x%08x\n", | |
| mailbox); | |
| goto err_disable; | |
| } | |
| dev_info(&intf->dev, "mode switch detected\n"); | |
| complete(&intf->mode_switch_completion); | |
| out_unlock: | |
| mutex_unlock(&intf->mutex); | |
| return; | |
| err_disable: | |
| gb_interface_disable(intf); | |
| gb_interface_deactivate(intf); | |
| mutex_unlock(&intf->mutex); | |
| } | |
| static void gb_interface_mode_switch_work(struct work_struct *work) | |
| { | |
| struct gb_interface *intf; | |
| struct gb_control *control; | |
| unsigned long timeout; | |
| int ret; | |
| intf = container_of(work, struct gb_interface, mode_switch_work); | |
| mutex_lock(&intf->mutex); | |
| /* Make sure interface is still enabled. */ | |
| if (!intf->enabled) { | |
| dev_dbg(&intf->dev, "mode switch aborted\n"); | |
| intf->mode_switch = false; | |
| mutex_unlock(&intf->mutex); | |
| goto out_interface_put; | |
| } | |
| /* | |
| * Prepare the control device for mode switch and make sure to get an | |
| * extra reference before it goes away during interface disable. | |
| */ | |
| control = gb_control_get(intf->control); | |
| gb_control_mode_switch_prepare(control); | |
| gb_interface_disable(intf); | |
| mutex_unlock(&intf->mutex); | |
| timeout = msecs_to_jiffies(GB_INTERFACE_MODE_SWITCH_TIMEOUT); | |
| ret = wait_for_completion_interruptible_timeout( | |
| &intf->mode_switch_completion, timeout); | |
| /* Finalise control-connection mode switch. */ | |
| gb_control_mode_switch_complete(control); | |
| gb_control_put(control); | |
| if (ret < 0) { | |
| dev_err(&intf->dev, "mode switch interrupted\n"); | |
| goto err_deactivate; | |
| } else if (ret == 0) { | |
| dev_err(&intf->dev, "mode switch timed out\n"); | |
| goto err_deactivate; | |
| } | |
| /* Re-enable (re-enumerate) interface if still active. */ | |
| mutex_lock(&intf->mutex); | |
| intf->mode_switch = false; | |
| if (intf->active) { | |
| ret = gb_interface_enable(intf); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to re-enable interface: %d\n", | |
| ret); | |
| gb_interface_deactivate(intf); | |
| } | |
| } | |
| mutex_unlock(&intf->mutex); | |
| out_interface_put: | |
| gb_interface_put(intf); | |
| return; | |
| err_deactivate: | |
| mutex_lock(&intf->mutex); | |
| intf->mode_switch = false; | |
| gb_interface_deactivate(intf); | |
| mutex_unlock(&intf->mutex); | |
| gb_interface_put(intf); | |
| } | |
| int gb_interface_request_mode_switch(struct gb_interface *intf) | |
| { | |
| int ret = 0; | |
| mutex_lock(&intf->mutex); | |
| if (intf->mode_switch) { | |
| ret = -EBUSY; | |
| goto out_unlock; | |
| } | |
| intf->mode_switch = true; | |
| reinit_completion(&intf->mode_switch_completion); | |
| /* | |
| * Get a reference to the interface device, which will be put once the | |
| * mode switch is complete. | |
| */ | |
| get_device(&intf->dev); | |
| if (!queue_work(system_long_wq, &intf->mode_switch_work)) { | |
| put_device(&intf->dev); | |
| ret = -EBUSY; | |
| goto out_unlock; | |
| } | |
| out_unlock: | |
| mutex_unlock(&intf->mutex); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(gb_interface_request_mode_switch); | |
| /* | |
| * T_TstSrcIncrement is written by the module on ES2 as a stand-in for the | |
| * init-status attribute DME_TOSHIBA_INIT_STATUS. The AP needs to read and | |
| * clear it after reading a non-zero value from it. | |
| * | |
| * FIXME: This is module-hardware dependent and needs to be extended for every | |
| * type of module we want to support. | |
| */ | |
| static int gb_interface_read_and_clear_init_status(struct gb_interface *intf) | |
| { | |
| struct gb_host_device *hd = intf->hd; | |
| unsigned long bootrom_quirks; | |
| unsigned long s2l_quirks; | |
| int ret; | |
| u32 value; | |
| u16 attr; | |
| u8 init_status; | |
| /* | |
| * ES2 bridges use T_TstSrcIncrement for the init status. | |
| * | |
| * FIXME: Remove ES2 support | |
| */ | |
| if (intf->quirks & GB_INTERFACE_QUIRK_NO_INIT_STATUS) | |
| attr = DME_T_TST_SRC_INCREMENT; | |
| else | |
| attr = DME_TOSHIBA_GMP_INIT_STATUS; | |
| ret = gb_svc_dme_peer_get(hd->svc, intf->interface_id, attr, | |
| DME_SELECTOR_INDEX_NULL, &value); | |
| if (ret) | |
| return ret; | |
| /* | |
| * A nonzero init status indicates the module has finished | |
| * initializing. | |
| */ | |
| if (!value) { | |
| dev_err(&intf->dev, "invalid init status\n"); | |
| return -ENODEV; | |
| } | |
| /* | |
| * Extract the init status. | |
| * | |
| * For ES2: We need to check lowest 8 bits of 'value'. | |
| * For ES3: We need to check highest 8 bits out of 32 of 'value'. | |
| * | |
| * FIXME: Remove ES2 support | |
| */ | |
| if (intf->quirks & GB_INTERFACE_QUIRK_NO_INIT_STATUS) | |
| init_status = value & 0xff; | |
| else | |
| init_status = value >> 24; | |
| /* | |
| * Check if the interface is executing the quirky ES3 bootrom that, | |
| * for example, requires E2EFC, CSD and CSV to be disabled. | |
| */ | |
| bootrom_quirks = GB_INTERFACE_QUIRK_NO_CPORT_FEATURES | | |
| GB_INTERFACE_QUIRK_FORCED_DISABLE | | |
| GB_INTERFACE_QUIRK_LEGACY_MODE_SWITCH | | |
| GB_INTERFACE_QUIRK_NO_BUNDLE_ACTIVATE; | |
| s2l_quirks = GB_INTERFACE_QUIRK_NO_PM; | |
| switch (init_status) { | |
| case GB_INIT_BOOTROM_UNIPRO_BOOT_STARTED: | |
| case GB_INIT_BOOTROM_FALLBACK_UNIPRO_BOOT_STARTED: | |
| intf->quirks |= bootrom_quirks; | |
| break; | |
| case GB_INIT_S2_LOADER_BOOT_STARTED: | |
| /* S2 Loader doesn't support runtime PM */ | |
| intf->quirks &= ~bootrom_quirks; | |
| intf->quirks |= s2l_quirks; | |
| break; | |
| default: | |
| intf->quirks &= ~bootrom_quirks; | |
| intf->quirks &= ~s2l_quirks; | |
| } | |
| /* Clear the init status. */ | |
| return gb_svc_dme_peer_set(hd->svc, intf->interface_id, attr, | |
| DME_SELECTOR_INDEX_NULL, 0); | |
| } | |
| /* interface sysfs attributes */ | |
| #define gb_interface_attr(field, type) \ | |
| static ssize_t field##_show(struct device *dev, \ | |
| struct device_attribute *attr, \ | |
| char *buf) \ | |
| { \ | |
| struct gb_interface *intf = to_gb_interface(dev); \ | |
| return scnprintf(buf, PAGE_SIZE, type"\n", intf->field); \ | |
| } \ | |
| static DEVICE_ATTR_RO(field) | |
| gb_interface_attr(ddbl1_manufacturer_id, "0x%08x"); | |
| gb_interface_attr(ddbl1_product_id, "0x%08x"); | |
| gb_interface_attr(interface_id, "%u"); | |
| gb_interface_attr(vendor_id, "0x%08x"); | |
| gb_interface_attr(product_id, "0x%08x"); | |
| gb_interface_attr(serial_number, "0x%016llx"); | |
| static ssize_t voltage_now_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| int ret; | |
| u32 measurement; | |
| ret = gb_svc_pwrmon_intf_sample_get(intf->hd->svc, intf->interface_id, | |
| GB_SVC_PWRMON_TYPE_VOL, | |
| &measurement); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to get voltage sample (%d)\n", ret); | |
| return ret; | |
| } | |
| return sprintf(buf, "%u\n", measurement); | |
| } | |
| static DEVICE_ATTR_RO(voltage_now); | |
| static ssize_t current_now_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| int ret; | |
| u32 measurement; | |
| ret = gb_svc_pwrmon_intf_sample_get(intf->hd->svc, intf->interface_id, | |
| GB_SVC_PWRMON_TYPE_CURR, | |
| &measurement); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to get current sample (%d)\n", ret); | |
| return ret; | |
| } | |
| return sprintf(buf, "%u\n", measurement); | |
| } | |
| static DEVICE_ATTR_RO(current_now); | |
| static ssize_t power_now_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| int ret; | |
| u32 measurement; | |
| ret = gb_svc_pwrmon_intf_sample_get(intf->hd->svc, intf->interface_id, | |
| GB_SVC_PWRMON_TYPE_PWR, | |
| &measurement); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to get power sample (%d)\n", ret); | |
| return ret; | |
| } | |
| return sprintf(buf, "%u\n", measurement); | |
| } | |
| static DEVICE_ATTR_RO(power_now); | |
| static ssize_t power_state_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| if (intf->active) | |
| return scnprintf(buf, PAGE_SIZE, "on\n"); | |
| else | |
| return scnprintf(buf, PAGE_SIZE, "off\n"); | |
| } | |
| static ssize_t power_state_store(struct device *dev, | |
| struct device_attribute *attr, const char *buf, | |
| size_t len) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| bool activate; | |
| int ret = 0; | |
| if (kstrtobool(buf, &activate)) | |
| return -EINVAL; | |
| mutex_lock(&intf->mutex); | |
| if (activate == intf->active) | |
| goto unlock; | |
| if (activate) { | |
| ret = gb_interface_activate(intf); | |
| if (ret) { | |
| dev_err(&intf->dev, | |
| "failed to activate interface: %d\n", ret); | |
| goto unlock; | |
| } | |
| ret = gb_interface_enable(intf); | |
| if (ret) { | |
| dev_err(&intf->dev, | |
| "failed to enable interface: %d\n", ret); | |
| gb_interface_deactivate(intf); | |
| goto unlock; | |
| } | |
| } else { | |
| gb_interface_disable(intf); | |
| gb_interface_deactivate(intf); | |
| } | |
| unlock: | |
| mutex_unlock(&intf->mutex); | |
| if (ret) | |
| return ret; | |
| return len; | |
| } | |
| static DEVICE_ATTR_RW(power_state); | |
| static const char *gb_interface_type_string(struct gb_interface *intf) | |
| { | |
| static const char * const types[] = { | |
| [GB_INTERFACE_TYPE_INVALID] = "invalid", | |
| [GB_INTERFACE_TYPE_UNKNOWN] = "unknown", | |
| [GB_INTERFACE_TYPE_DUMMY] = "dummy", | |
| [GB_INTERFACE_TYPE_UNIPRO] = "unipro", | |
| [GB_INTERFACE_TYPE_GREYBUS] = "greybus", | |
| }; | |
| return types[intf->type]; | |
| } | |
| static ssize_t interface_type_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| return sprintf(buf, "%s\n", gb_interface_type_string(intf)); | |
| } | |
| static DEVICE_ATTR_RO(interface_type); | |
| static struct attribute *interface_unipro_attrs[] = { | |
| &dev_attr_ddbl1_manufacturer_id.attr, | |
| &dev_attr_ddbl1_product_id.attr, | |
| NULL | |
| }; | |
| static struct attribute *interface_greybus_attrs[] = { | |
| &dev_attr_vendor_id.attr, | |
| &dev_attr_product_id.attr, | |
| &dev_attr_serial_number.attr, | |
| NULL | |
| }; | |
| static struct attribute *interface_power_attrs[] = { | |
| &dev_attr_voltage_now.attr, | |
| &dev_attr_current_now.attr, | |
| &dev_attr_power_now.attr, | |
| &dev_attr_power_state.attr, | |
| NULL | |
| }; | |
| static struct attribute *interface_common_attrs[] = { | |
| &dev_attr_interface_id.attr, | |
| &dev_attr_interface_type.attr, | |
| NULL | |
| }; | |
| static umode_t interface_unipro_is_visible(struct kobject *kobj, | |
| struct attribute *attr, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| switch (intf->type) { | |
| case GB_INTERFACE_TYPE_UNIPRO: | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| return attr->mode; | |
| default: | |
| return 0; | |
| } | |
| } | |
| static umode_t interface_greybus_is_visible(struct kobject *kobj, | |
| struct attribute *attr, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| switch (intf->type) { | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| return attr->mode; | |
| default: | |
| return 0; | |
| } | |
| } | |
| static umode_t interface_power_is_visible(struct kobject *kobj, | |
| struct attribute *attr, int n) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| switch (intf->type) { | |
| case GB_INTERFACE_TYPE_UNIPRO: | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| return attr->mode; | |
| default: | |
| return 0; | |
| } | |
| } | |
| static const struct attribute_group interface_unipro_group = { | |
| .is_visible = interface_unipro_is_visible, | |
| .attrs = interface_unipro_attrs, | |
| }; | |
| static const struct attribute_group interface_greybus_group = { | |
| .is_visible = interface_greybus_is_visible, | |
| .attrs = interface_greybus_attrs, | |
| }; | |
| static const struct attribute_group interface_power_group = { | |
| .is_visible = interface_power_is_visible, | |
| .attrs = interface_power_attrs, | |
| }; | |
| static const struct attribute_group interface_common_group = { | |
| .attrs = interface_common_attrs, | |
| }; | |
| static const struct attribute_group *interface_groups[] = { | |
| &interface_unipro_group, | |
| &interface_greybus_group, | |
| &interface_power_group, | |
| &interface_common_group, | |
| NULL | |
| }; | |
| static void gb_interface_release(struct device *dev) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| trace_gb_interface_release(intf); | |
| cancel_work_sync(&intf->mode_switch_work); | |
| kfree(intf); | |
| } | |
| #ifdef CONFIG_PM | |
| static int gb_interface_suspend(struct device *dev) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| int ret; | |
| ret = gb_control_interface_suspend_prepare(intf->control); | |
| if (ret) | |
| return ret; | |
| ret = gb_control_suspend(intf->control); | |
| if (ret) | |
| goto err_hibernate_abort; | |
| ret = gb_interface_hibernate_link(intf); | |
| if (ret) | |
| return ret; | |
| /* Delay to allow interface to enter standby before disabling refclk */ | |
| msleep(GB_INTERFACE_SUSPEND_HIBERNATE_DELAY_MS); | |
| ret = gb_interface_refclk_set(intf, false); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| err_hibernate_abort: | |
| gb_control_interface_hibernate_abort(intf->control); | |
| return ret; | |
| } | |
| static int gb_interface_resume(struct device *dev) | |
| { | |
| struct gb_interface *intf = to_gb_interface(dev); | |
| struct gb_svc *svc = intf->hd->svc; | |
| int ret; | |
| ret = gb_interface_refclk_set(intf, true); | |
| if (ret) | |
| return ret; | |
| ret = gb_svc_intf_resume(svc, intf->interface_id); | |
| if (ret) | |
| return ret; | |
| ret = gb_control_resume(intf->control); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static int gb_interface_runtime_idle(struct device *dev) | |
| { | |
| pm_runtime_mark_last_busy(dev); | |
| pm_request_autosuspend(dev); | |
| return 0; | |
| } | |
| #endif | |
| static const struct dev_pm_ops gb_interface_pm_ops = { | |
| SET_RUNTIME_PM_OPS(gb_interface_suspend, gb_interface_resume, | |
| gb_interface_runtime_idle) | |
| }; | |
| const struct device_type greybus_interface_type = { | |
| .name = "greybus_interface", | |
| .release = gb_interface_release, | |
| .pm = &gb_interface_pm_ops, | |
| }; | |
| /* | |
| * A Greybus module represents a user-replaceable component on a GMP | |
| * phone. An interface is the physical connection on that module. A | |
| * module may have more than one interface. | |
| * | |
| * Create a gb_interface structure to represent a discovered interface. | |
| * The position of interface within the Endo is encoded in "interface_id" | |
| * argument. | |
| * | |
| * Returns a pointer to the new interface or a null pointer if a | |
| * failure occurs due to memory exhaustion. | |
| */ | |
| struct gb_interface *gb_interface_create(struct gb_module *module, | |
| u8 interface_id) | |
| { | |
| struct gb_host_device *hd = module->hd; | |
| struct gb_interface *intf; | |
| intf = kzalloc_obj(*intf); | |
| if (!intf) | |
| return NULL; | |
| intf->hd = hd; /* XXX refcount? */ | |
| intf->module = module; | |
| intf->interface_id = interface_id; | |
| INIT_LIST_HEAD(&intf->bundles); | |
| INIT_LIST_HEAD(&intf->manifest_descs); | |
| mutex_init(&intf->mutex); | |
| INIT_WORK(&intf->mode_switch_work, gb_interface_mode_switch_work); | |
| init_completion(&intf->mode_switch_completion); | |
| /* Invalid device id to start with */ | |
| intf->device_id = GB_INTERFACE_DEVICE_ID_BAD; | |
| intf->dev.parent = &module->dev; | |
| intf->dev.bus = &greybus_bus_type; | |
| intf->dev.type = &greybus_interface_type; | |
| intf->dev.groups = interface_groups; | |
| intf->dev.dma_mask = module->dev.dma_mask; | |
| device_initialize(&intf->dev); | |
| dev_set_name(&intf->dev, "%s.%u", dev_name(&module->dev), | |
| interface_id); | |
| pm_runtime_set_autosuspend_delay(&intf->dev, | |
| GB_INTERFACE_AUTOSUSPEND_MS); | |
| trace_gb_interface_create(intf); | |
| return intf; | |
| } | |
| static int gb_interface_vsys_set(struct gb_interface *intf, bool enable) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| int ret; | |
| dev_dbg(&intf->dev, "%s - %d\n", __func__, enable); | |
| ret = gb_svc_intf_vsys_set(svc, intf->interface_id, enable); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to set v_sys: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int gb_interface_refclk_set(struct gb_interface *intf, bool enable) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| int ret; | |
| dev_dbg(&intf->dev, "%s - %d\n", __func__, enable); | |
| ret = gb_svc_intf_refclk_set(svc, intf->interface_id, enable); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to set refclk: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int gb_interface_unipro_set(struct gb_interface *intf, bool enable) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| int ret; | |
| dev_dbg(&intf->dev, "%s - %d\n", __func__, enable); | |
| ret = gb_svc_intf_unipro_set(svc, intf->interface_id, enable); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to set UniPro: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int gb_interface_activate_operation(struct gb_interface *intf, | |
| enum gb_interface_type *intf_type) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| u8 type; | |
| int ret; | |
| dev_dbg(&intf->dev, "%s\n", __func__); | |
| ret = gb_svc_intf_activate(svc, intf->interface_id, &type); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to activate: %d\n", ret); | |
| return ret; | |
| } | |
| switch (type) { | |
| case GB_SVC_INTF_TYPE_DUMMY: | |
| *intf_type = GB_INTERFACE_TYPE_DUMMY; | |
| /* FIXME: handle as an error for now */ | |
| return -ENODEV; | |
| case GB_SVC_INTF_TYPE_UNIPRO: | |
| *intf_type = GB_INTERFACE_TYPE_UNIPRO; | |
| dev_err(&intf->dev, "interface type UniPro not supported\n"); | |
| /* FIXME: handle as an error for now */ | |
| return -ENODEV; | |
| case GB_SVC_INTF_TYPE_GREYBUS: | |
| *intf_type = GB_INTERFACE_TYPE_GREYBUS; | |
| break; | |
| default: | |
| dev_err(&intf->dev, "unknown interface type: %u\n", type); | |
| *intf_type = GB_INTERFACE_TYPE_UNKNOWN; | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static int gb_interface_hibernate_link(struct gb_interface *intf) | |
| { | |
| struct gb_svc *svc = intf->hd->svc; | |
| return gb_svc_intf_set_power_mode_hibernate(svc, intf->interface_id); | |
| } | |
| static int _gb_interface_activate(struct gb_interface *intf, | |
| enum gb_interface_type *type) | |
| { | |
| int ret; | |
| *type = GB_INTERFACE_TYPE_UNKNOWN; | |
| if (intf->ejected || intf->removed) | |
| return -ENODEV; | |
| ret = gb_interface_vsys_set(intf, true); | |
| if (ret) | |
| return ret; | |
| ret = gb_interface_refclk_set(intf, true); | |
| if (ret) | |
| goto err_vsys_disable; | |
| ret = gb_interface_unipro_set(intf, true); | |
| if (ret) | |
| goto err_refclk_disable; | |
| ret = gb_interface_activate_operation(intf, type); | |
| if (ret) { | |
| switch (*type) { | |
| case GB_INTERFACE_TYPE_UNIPRO: | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| goto err_hibernate_link; | |
| default: | |
| goto err_unipro_disable; | |
| } | |
| } | |
| ret = gb_interface_read_dme(intf); | |
| if (ret) | |
| goto err_hibernate_link; | |
| ret = gb_interface_route_create(intf); | |
| if (ret) | |
| goto err_hibernate_link; | |
| intf->active = true; | |
| trace_gb_interface_activate(intf); | |
| return 0; | |
| err_hibernate_link: | |
| gb_interface_hibernate_link(intf); | |
| err_unipro_disable: | |
| gb_interface_unipro_set(intf, false); | |
| err_refclk_disable: | |
| gb_interface_refclk_set(intf, false); | |
| err_vsys_disable: | |
| gb_interface_vsys_set(intf, false); | |
| return ret; | |
| } | |
| /* | |
| * At present, we assume a UniPro-only module to be a Greybus module that | |
| * failed to send its mailbox poke. There is some reason to believe that this | |
| * is because of a bug in the ES3 bootrom. | |
| * | |
| * FIXME: Check if this is a Toshiba bridge before retrying? | |
| */ | |
| static int _gb_interface_activate_es3_hack(struct gb_interface *intf, | |
| enum gb_interface_type *type) | |
| { | |
| int retries = 3; | |
| int ret; | |
| while (retries--) { | |
| ret = _gb_interface_activate(intf, type); | |
| if (ret == -ENODEV && *type == GB_INTERFACE_TYPE_UNIPRO) | |
| continue; | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Activate an interface. | |
| * | |
| * Locking: Caller holds the interface mutex. | |
| */ | |
| int gb_interface_activate(struct gb_interface *intf) | |
| { | |
| enum gb_interface_type type; | |
| int ret; | |
| switch (intf->type) { | |
| case GB_INTERFACE_TYPE_INVALID: | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| ret = _gb_interface_activate_es3_hack(intf, &type); | |
| break; | |
| default: | |
| ret = _gb_interface_activate(intf, &type); | |
| } | |
| /* Make sure type is detected correctly during reactivation. */ | |
| if (intf->type != GB_INTERFACE_TYPE_INVALID) { | |
| if (type != intf->type) { | |
| dev_err(&intf->dev, "failed to detect interface type\n"); | |
| if (!ret) | |
| gb_interface_deactivate(intf); | |
| return -EIO; | |
| } | |
| } else { | |
| intf->type = type; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Deactivate an interface. | |
| * | |
| * Locking: Caller holds the interface mutex. | |
| */ | |
| void gb_interface_deactivate(struct gb_interface *intf) | |
| { | |
| if (!intf->active) | |
| return; | |
| trace_gb_interface_deactivate(intf); | |
| /* Abort any ongoing mode switch. */ | |
| if (intf->mode_switch) | |
| complete(&intf->mode_switch_completion); | |
| gb_interface_route_destroy(intf); | |
| gb_interface_hibernate_link(intf); | |
| gb_interface_unipro_set(intf, false); | |
| gb_interface_refclk_set(intf, false); | |
| gb_interface_vsys_set(intf, false); | |
| intf->active = false; | |
| } | |
| /* | |
| * Enable an interface by enabling its control connection, fetching the | |
| * manifest and other information over it, and finally registering its child | |
| * devices. | |
| * | |
| * Locking: Caller holds the interface mutex. | |
| */ | |
| int gb_interface_enable(struct gb_interface *intf) | |
| { | |
| struct gb_control *control; | |
| struct gb_bundle *bundle, *tmp; | |
| int ret, size; | |
| void *manifest; | |
| ret = gb_interface_read_and_clear_init_status(intf); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to clear init status: %d\n", ret); | |
| return ret; | |
| } | |
| /* Establish control connection */ | |
| control = gb_control_create(intf); | |
| if (IS_ERR(control)) { | |
| dev_err(&intf->dev, "failed to create control device: %ld\n", | |
| PTR_ERR(control)); | |
| return PTR_ERR(control); | |
| } | |
| intf->control = control; | |
| ret = gb_control_enable(intf->control); | |
| if (ret) | |
| goto err_put_control; | |
| /* Get manifest size using control protocol on CPort */ | |
| size = gb_control_get_manifest_size_operation(intf); | |
| if (size <= 0) { | |
| dev_err(&intf->dev, "failed to get manifest size: %d\n", size); | |
| if (size) | |
| ret = size; | |
| else | |
| ret = -EINVAL; | |
| goto err_disable_control; | |
| } | |
| manifest = kmalloc(size, GFP_KERNEL); | |
| if (!manifest) { | |
| ret = -ENOMEM; | |
| goto err_disable_control; | |
| } | |
| /* Get manifest using control protocol on CPort */ | |
| ret = gb_control_get_manifest_operation(intf, manifest, size); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to get manifest: %d\n", ret); | |
| goto err_free_manifest; | |
| } | |
| /* | |
| * Parse the manifest and build up our data structures representing | |
| * what's in it. | |
| */ | |
| if (!gb_manifest_parse(intf, manifest, size)) { | |
| dev_err(&intf->dev, "failed to parse manifest\n"); | |
| ret = -EINVAL; | |
| goto err_destroy_bundles; | |
| } | |
| ret = gb_control_get_bundle_versions(intf->control); | |
| if (ret) | |
| goto err_destroy_bundles; | |
| /* Register the control device and any bundles */ | |
| ret = gb_control_add(intf->control); | |
| if (ret) | |
| goto err_destroy_bundles; | |
| pm_runtime_use_autosuspend(&intf->dev); | |
| pm_runtime_get_noresume(&intf->dev); | |
| pm_runtime_set_active(&intf->dev); | |
| pm_runtime_enable(&intf->dev); | |
| list_for_each_entry_safe_reverse(bundle, tmp, &intf->bundles, links) { | |
| ret = gb_bundle_add(bundle); | |
| if (ret) { | |
| gb_bundle_destroy(bundle); | |
| continue; | |
| } | |
| } | |
| kfree(manifest); | |
| intf->enabled = true; | |
| pm_runtime_put(&intf->dev); | |
| trace_gb_interface_enable(intf); | |
| return 0; | |
| err_destroy_bundles: | |
| list_for_each_entry_safe(bundle, tmp, &intf->bundles, links) | |
| gb_bundle_destroy(bundle); | |
| err_free_manifest: | |
| kfree(manifest); | |
| err_disable_control: | |
| gb_control_disable(intf->control); | |
| err_put_control: | |
| gb_control_put(intf->control); | |
| intf->control = NULL; | |
| return ret; | |
| } | |
| /* | |
| * Disable an interface and destroy its bundles. | |
| * | |
| * Locking: Caller holds the interface mutex. | |
| */ | |
| void gb_interface_disable(struct gb_interface *intf) | |
| { | |
| struct gb_bundle *bundle; | |
| struct gb_bundle *next; | |
| if (!intf->enabled) | |
| return; | |
| trace_gb_interface_disable(intf); | |
| pm_runtime_get_sync(&intf->dev); | |
| /* Set disconnected flag to avoid I/O during connection tear down. */ | |
| if (intf->quirks & GB_INTERFACE_QUIRK_FORCED_DISABLE) | |
| intf->disconnected = true; | |
| list_for_each_entry_safe(bundle, next, &intf->bundles, links) | |
| gb_bundle_destroy(bundle); | |
| if (!intf->mode_switch && !intf->disconnected) | |
| gb_control_interface_deactivate_prepare(intf->control); | |
| gb_control_del(intf->control); | |
| gb_control_disable(intf->control); | |
| gb_control_put(intf->control); | |
| intf->control = NULL; | |
| intf->enabled = false; | |
| pm_runtime_disable(&intf->dev); | |
| pm_runtime_set_suspended(&intf->dev); | |
| pm_runtime_dont_use_autosuspend(&intf->dev); | |
| pm_runtime_put_noidle(&intf->dev); | |
| } | |
| /* Register an interface. */ | |
| int gb_interface_add(struct gb_interface *intf) | |
| { | |
| int ret; | |
| ret = device_add(&intf->dev); | |
| if (ret) { | |
| dev_err(&intf->dev, "failed to register interface: %d\n", ret); | |
| return ret; | |
| } | |
| trace_gb_interface_add(intf); | |
| dev_info(&intf->dev, "Interface added (%s)\n", | |
| gb_interface_type_string(intf)); | |
| switch (intf->type) { | |
| case GB_INTERFACE_TYPE_GREYBUS: | |
| dev_info(&intf->dev, "GMP VID=0x%08x, PID=0x%08x\n", | |
| intf->vendor_id, intf->product_id); | |
| fallthrough; | |
| case GB_INTERFACE_TYPE_UNIPRO: | |
| dev_info(&intf->dev, "DDBL1 Manufacturer=0x%08x, Product=0x%08x\n", | |
| intf->ddbl1_manufacturer_id, | |
| intf->ddbl1_product_id); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* Deregister an interface. */ | |
| void gb_interface_del(struct gb_interface *intf) | |
| { | |
| if (device_is_registered(&intf->dev)) { | |
| trace_gb_interface_del(intf); | |
| device_del(&intf->dev); | |
| dev_info(&intf->dev, "Interface removed\n"); | |
| } | |
| } | |
| void gb_interface_put(struct gb_interface *intf) | |
| { | |
| put_device(&intf->dev); | |
| } |