| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Input driver for resistor ladder connected on ADC | |
| * | |
| * Copyright (c) 2016 Alexandre Belloni | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/iio/consumer.h> | |
| #include <linux/iio/types.h> | |
| #include <linux/input.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/slab.h> | |
| struct adc_keys_button { | |
| u32 voltage; | |
| u32 keycode; | |
| }; | |
| struct adc_keys_state { | |
| struct iio_channel *channel; | |
| u32 num_keys; | |
| u32 last_key; | |
| u32 keyup_voltage; | |
| const struct adc_keys_button *map; | |
| }; | |
| static void adc_keys_poll(struct input_dev *input) | |
| { | |
| struct adc_keys_state *st = input_get_drvdata(input); | |
| int i, value, ret; | |
| u32 diff, closest = 0xffffffff; | |
| int keycode = 0; | |
| ret = iio_read_channel_processed(st->channel, &value); | |
| if (unlikely(ret < 0)) { | |
| /* Forcibly release key if any was pressed */ | |
| value = st->keyup_voltage; | |
| } else { | |
| for (i = 0; i < st->num_keys; i++) { | |
| diff = abs(st->map[i].voltage - value); | |
| if (diff < closest) { | |
| closest = diff; | |
| keycode = st->map[i].keycode; | |
| } | |
| } | |
| } | |
| if (abs(st->keyup_voltage - value) < closest) | |
| keycode = 0; | |
| if (st->last_key && st->last_key != keycode) | |
| input_report_key(input, st->last_key, 0); | |
| if (keycode) | |
| input_report_key(input, keycode, 1); | |
| input_sync(input); | |
| st->last_key = keycode; | |
| } | |
| static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st) | |
| { | |
| struct adc_keys_button *map; | |
| int i; | |
| st->num_keys = device_get_child_node_count(dev); | |
| if (st->num_keys == 0) { | |
| dev_err(dev, "keymap is missing\n"); | |
| return -EINVAL; | |
| } | |
| map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL); | |
| if (!map) | |
| return -ENOMEM; | |
| i = 0; | |
| device_for_each_child_node_scoped(dev, child) { | |
| if (fwnode_property_read_u32(child, "press-threshold-microvolt", | |
| &map[i].voltage)) { | |
| dev_err(dev, "Key with invalid or missing voltage\n"); | |
| return -EINVAL; | |
| } | |
| map[i].voltage /= 1000; | |
| if (fwnode_property_read_u32(child, "linux,code", | |
| &map[i].keycode)) { | |
| dev_err(dev, "Key with invalid or missing linux,code\n"); | |
| return -EINVAL; | |
| } | |
| i++; | |
| } | |
| st->map = map; | |
| return 0; | |
| } | |
| static int adc_keys_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct adc_keys_state *st; | |
| struct input_dev *input; | |
| enum iio_chan_type type; | |
| int i, value; | |
| int error; | |
| st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); | |
| if (!st) | |
| return -ENOMEM; | |
| st->channel = devm_iio_channel_get(dev, "buttons"); | |
| if (IS_ERR(st->channel)) | |
| return PTR_ERR(st->channel); | |
| if (!st->channel->indio_dev) | |
| return -ENXIO; | |
| error = iio_get_channel_type(st->channel, &type); | |
| if (error < 0) | |
| return error; | |
| if (type != IIO_VOLTAGE) { | |
| dev_err(dev, "Incompatible channel type %d\n", type); | |
| return -EINVAL; | |
| } | |
| if (device_property_read_u32(dev, "keyup-threshold-microvolt", | |
| &st->keyup_voltage)) { | |
| dev_err(dev, "Invalid or missing keyup voltage\n"); | |
| return -EINVAL; | |
| } | |
| st->keyup_voltage /= 1000; | |
| error = adc_keys_load_keymap(dev, st); | |
| if (error) | |
| return error; | |
| input = devm_input_allocate_device(dev); | |
| if (!input) { | |
| dev_err(dev, "failed to allocate input device\n"); | |
| return -ENOMEM; | |
| } | |
| input_set_drvdata(input, st); | |
| input->name = pdev->name; | |
| input->phys = "adc-keys/input0"; | |
| input->id.bustype = BUS_HOST; | |
| input->id.vendor = 0x0001; | |
| input->id.product = 0x0001; | |
| input->id.version = 0x0100; | |
| __set_bit(EV_KEY, input->evbit); | |
| for (i = 0; i < st->num_keys; i++) | |
| __set_bit(st->map[i].keycode, input->keybit); | |
| if (device_property_read_bool(dev, "autorepeat")) | |
| __set_bit(EV_REP, input->evbit); | |
| error = input_setup_polling(input, adc_keys_poll); | |
| if (error) { | |
| dev_err(dev, "Unable to set up polling: %d\n", error); | |
| return error; | |
| } | |
| if (!device_property_read_u32(dev, "poll-interval", &value)) | |
| input_set_poll_interval(input, value); | |
| error = input_register_device(input); | |
| if (error) { | |
| dev_err(dev, "Unable to register input device: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id adc_keys_of_match[] = { | |
| { .compatible = "adc-keys", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, adc_keys_of_match); | |
| #endif | |
| static struct platform_driver adc_keys_driver = { | |
| .driver = { | |
| .name = "adc_keys", | |
| .of_match_table = of_match_ptr(adc_keys_of_match), | |
| }, | |
| .probe = adc_keys_probe, | |
| }; | |
| module_platform_driver(adc_keys_driver); | |
| MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); | |
| MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC"); | |
| MODULE_LICENSE("GPL v2"); |