| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * PS/2 mouse driver | |
| * | |
| * Copyright (c) 1999-2002 Vojtech Pavlik | |
| * Copyright (c) 2003-2004 Dmitry Torokhov | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #define psmouse_fmt(fmt) fmt | |
| #include <linux/bitops.h> | |
| #include <linux/delay.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/input.h> | |
| #include <linux/serio.h> | |
| #include <linux/init.h> | |
| #include <linux/libps2.h> | |
| #include <linux/mutex.h> | |
| #include <linux/types.h> | |
| #include "psmouse.h" | |
| #include "synaptics.h" | |
| #include "logips2pp.h" | |
| #include "alps.h" | |
| #include "lifebook.h" | |
| #include "trackpoint.h" | |
| #include "touchkit_ps2.h" | |
| #include "elantech.h" | |
| #include "sentelic.h" | |
| #include "cypress_ps2.h" | |
| #include "focaltech.h" | |
| #include "vmmouse.h" | |
| #include "byd.h" | |
| #define DRIVER_DESC "PS/2 mouse driver" | |
| MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL"); | |
| static unsigned int psmouse_max_proto = PSMOUSE_AUTO; | |
| static int psmouse_set_maxproto(const char *val, const struct kernel_param *); | |
| static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp); | |
| static const struct kernel_param_ops param_ops_proto_abbrev = { | |
| .set = psmouse_set_maxproto, | |
| .get = psmouse_get_maxproto, | |
| }; | |
| #define param_check_proto_abbrev(name, p) __param_check(name, p, unsigned int) | |
| module_param_named(proto, psmouse_max_proto, proto_abbrev, 0644); | |
| MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps, any). Useful for KVM switches."); | |
| static unsigned int psmouse_resolution = 200; | |
| module_param_named(resolution, psmouse_resolution, uint, 0644); | |
| MODULE_PARM_DESC(resolution, "Resolution, in dpi."); | |
| static unsigned int psmouse_rate = 100; | |
| module_param_named(rate, psmouse_rate, uint, 0644); | |
| MODULE_PARM_DESC(rate, "Report rate, in reports per second."); | |
| static bool psmouse_smartscroll = true; | |
| module_param_named(smartscroll, psmouse_smartscroll, bool, 0644); | |
| MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled."); | |
| static bool psmouse_a4tech_2wheels; | |
| module_param_named(a4tech_workaround, psmouse_a4tech_2wheels, bool, 0644); | |
| MODULE_PARM_DESC(a4tech_workaround, "A4Tech second scroll wheel workaround, 1 = enabled, 0 = disabled (default)."); | |
| static unsigned int psmouse_resetafter = 5; | |
| module_param_named(resetafter, psmouse_resetafter, uint, 0644); | |
| MODULE_PARM_DESC(resetafter, "Reset device after so many bad packets (0 = never)."); | |
| static unsigned int psmouse_resync_time; | |
| module_param_named(resync_time, psmouse_resync_time, uint, 0644); | |
| MODULE_PARM_DESC(resync_time, "How long can mouse stay idle before forcing resync (in seconds, 0 = never)."); | |
| PSMOUSE_DEFINE_ATTR(protocol, S_IWUSR | S_IRUGO, | |
| NULL, | |
| psmouse_attr_show_protocol, psmouse_attr_set_protocol); | |
| PSMOUSE_DEFINE_ATTR(rate, S_IWUSR | S_IRUGO, | |
| (void *) offsetof(struct psmouse, rate), | |
| psmouse_show_int_attr, psmouse_attr_set_rate); | |
| PSMOUSE_DEFINE_ATTR(resolution, S_IWUSR | S_IRUGO, | |
| (void *) offsetof(struct psmouse, resolution), | |
| psmouse_show_int_attr, psmouse_attr_set_resolution); | |
| PSMOUSE_DEFINE_ATTR(resetafter, S_IWUSR | S_IRUGO, | |
| (void *) offsetof(struct psmouse, resetafter), | |
| psmouse_show_int_attr, psmouse_set_int_attr); | |
| PSMOUSE_DEFINE_ATTR(resync_time, S_IWUSR | S_IRUGO, | |
| (void *) offsetof(struct psmouse, resync_time), | |
| psmouse_show_int_attr, psmouse_set_int_attr); | |
| static struct attribute *psmouse_dev_attrs[] = { | |
| &psmouse_attr_protocol.dattr.attr, | |
| &psmouse_attr_rate.dattr.attr, | |
| &psmouse_attr_resolution.dattr.attr, | |
| &psmouse_attr_resetafter.dattr.attr, | |
| &psmouse_attr_resync_time.dattr.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(psmouse_dev); | |
| /* | |
| * psmouse_mutex protects all operations changing state of mouse | |
| * (connecting, disconnecting, changing rate or resolution via | |
| * sysfs). We could use a per-device semaphore but since there | |
| * rarely more than one PS/2 mouse connected and since semaphore | |
| * is taken in "slow" paths it is not worth it. | |
| */ | |
| static DEFINE_MUTEX(psmouse_mutex); | |
| struct psmouse *psmouse_from_serio(struct serio *serio) | |
| { | |
| struct ps2dev *ps2dev = serio_get_drvdata(serio); | |
| return container_of(ps2dev, struct psmouse, ps2dev); | |
| } | |
| void psmouse_report_standard_buttons(struct input_dev *dev, u8 buttons) | |
| { | |
| input_report_key(dev, BTN_LEFT, buttons & BIT(0)); | |
| input_report_key(dev, BTN_MIDDLE, buttons & BIT(2)); | |
| input_report_key(dev, BTN_RIGHT, buttons & BIT(1)); | |
| } | |
| void psmouse_report_standard_motion(struct input_dev *dev, u8 *packet) | |
| { | |
| int x, y; | |
| x = packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0; | |
| y = packet[2] ? packet[2] - ((packet[0] << 3) & 0x100) : 0; | |
| input_report_rel(dev, REL_X, x); | |
| input_report_rel(dev, REL_Y, -y); | |
| } | |
| void psmouse_report_standard_packet(struct input_dev *dev, u8 *packet) | |
| { | |
| psmouse_report_standard_buttons(dev, packet[0]); | |
| psmouse_report_standard_motion(dev, packet); | |
| } | |
| /* | |
| * psmouse_process_byte() analyzes the PS/2 data stream and reports | |
| * relevant events to the input module once full packet has arrived. | |
| */ | |
| psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) | |
| { | |
| struct input_dev *dev = psmouse->dev; | |
| u8 *packet = psmouse->packet; | |
| int wheel; | |
| if (psmouse->pktcnt < psmouse->pktsize) | |
| return PSMOUSE_GOOD_DATA; | |
| /* Full packet accumulated, process it */ | |
| switch (psmouse->protocol->type) { | |
| case PSMOUSE_IMPS: | |
| /* IntelliMouse has scroll wheel */ | |
| input_report_rel(dev, REL_WHEEL, -(s8) packet[3]); | |
| break; | |
| case PSMOUSE_IMEX: | |
| /* Scroll wheel and buttons on IntelliMouse Explorer */ | |
| switch (packet[3] & 0xC0) { | |
| case 0x80: /* vertical scroll on IntelliMouse Explorer 4.0 */ | |
| input_report_rel(dev, REL_WHEEL, | |
| -sign_extend32(packet[3], 5)); | |
| break; | |
| case 0x40: /* horizontal scroll on IntelliMouse Explorer 4.0 */ | |
| input_report_rel(dev, REL_HWHEEL, | |
| -sign_extend32(packet[3], 5)); | |
| break; | |
| case 0x00: | |
| case 0xC0: | |
| wheel = sign_extend32(packet[3], 3); | |
| /* | |
| * Some A4Tech mice have two scroll wheels, with first | |
| * one reporting +/-1 in the lower nibble, and second | |
| * one reporting +/-2. | |
| */ | |
| if (psmouse_a4tech_2wheels && abs(wheel) > 1) | |
| input_report_rel(dev, REL_HWHEEL, wheel / 2); | |
| else | |
| input_report_rel(dev, REL_WHEEL, -wheel); | |
| input_report_key(dev, BTN_SIDE, packet[3] & BIT(4)); | |
| input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5)); | |
| break; | |
| } | |
| break; | |
| case PSMOUSE_GENPS: | |
| /* Report scroll buttons on NetMice */ | |
| input_report_rel(dev, REL_WHEEL, -(s8) packet[3]); | |
| /* Extra buttons on Genius NewNet 3D */ | |
| input_report_key(dev, BTN_SIDE, packet[0] & BIT(6)); | |
| input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7)); | |
| break; | |
| case PSMOUSE_THINKPS: | |
| /* Extra button on ThinkingMouse */ | |
| input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3)); | |
| /* | |
| * Without this bit of weirdness moving up gives wildly | |
| * high Y changes. | |
| */ | |
| packet[1] |= (packet[0] & 0x40) << 1; | |
| break; | |
| case PSMOUSE_CORTRON: | |
| /* | |
| * Cortron PS2 Trackball reports SIDE button in the | |
| * 4th bit of the first byte. | |
| */ | |
| input_report_key(dev, BTN_SIDE, packet[0] & BIT(3)); | |
| packet[0] |= BIT(3); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* Generic PS/2 Mouse */ | |
| packet[0] |= psmouse->extra_buttons; | |
| psmouse_report_standard_packet(dev, packet); | |
| input_sync(dev); | |
| return PSMOUSE_FULL_PACKET; | |
| } | |
| /* | |
| * __psmouse_set_state() sets new psmouse state and resets all flags. | |
| */ | |
| static inline void __psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) | |
| { | |
| psmouse->state = new_state; | |
| psmouse->pktcnt = psmouse->out_of_sync_cnt = 0; | |
| psmouse->ps2dev.flags = 0; | |
| psmouse->last = jiffies; | |
| } | |
| /* | |
| * psmouse_set_state() sets new psmouse state and resets all flags and | |
| * counters while holding serio lock so fighting with interrupt handler | |
| * is not a concern. | |
| */ | |
| void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state) | |
| { | |
| serio_pause_rx(psmouse->ps2dev.serio); | |
| __psmouse_set_state(psmouse, new_state); | |
| serio_continue_rx(psmouse->ps2dev.serio); | |
| } | |
| /* | |
| * psmouse_handle_byte() processes one byte of the input data stream | |
| * by calling corresponding protocol handler. | |
| */ | |
| static int psmouse_handle_byte(struct psmouse *psmouse) | |
| { | |
| psmouse_ret_t rc = psmouse->protocol_handler(psmouse); | |
| switch (rc) { | |
| case PSMOUSE_BAD_DATA: | |
| if (psmouse->state == PSMOUSE_ACTIVATED) { | |
| psmouse_warn(psmouse, | |
| "%s at %s lost sync at byte %d\n", | |
| psmouse->name, psmouse->phys, | |
| psmouse->pktcnt); | |
| if (++psmouse->out_of_sync_cnt == psmouse->resetafter) { | |
| __psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| psmouse_notice(psmouse, | |
| "issuing reconnect request\n"); | |
| serio_reconnect(psmouse->ps2dev.serio); | |
| return -EIO; | |
| } | |
| } | |
| psmouse->pktcnt = 0; | |
| break; | |
| case PSMOUSE_FULL_PACKET: | |
| psmouse->pktcnt = 0; | |
| if (psmouse->out_of_sync_cnt) { | |
| psmouse->out_of_sync_cnt = 0; | |
| psmouse_notice(psmouse, | |
| "%s at %s - driver resynced.\n", | |
| psmouse->name, psmouse->phys); | |
| } | |
| break; | |
| case PSMOUSE_GOOD_DATA: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static void psmouse_handle_oob_data(struct psmouse *psmouse, u8 data) | |
| { | |
| switch (psmouse->oob_data_type) { | |
| case PSMOUSE_OOB_NONE: | |
| psmouse->oob_data_type = data; | |
| break; | |
| case PSMOUSE_OOB_EXTRA_BTNS: | |
| psmouse_report_standard_buttons(psmouse->dev, data); | |
| input_sync(psmouse->dev); | |
| psmouse->extra_buttons = data; | |
| psmouse->oob_data_type = PSMOUSE_OOB_NONE; | |
| break; | |
| default: | |
| psmouse_warn(psmouse, | |
| "unknown OOB_DATA type: 0x%02x\n", | |
| psmouse->oob_data_type); | |
| psmouse->oob_data_type = PSMOUSE_OOB_NONE; | |
| break; | |
| } | |
| } | |
| static enum ps2_disposition psmouse_pre_receive_byte(struct ps2dev *ps2dev, | |
| u8 data, | |
| unsigned int flags) | |
| { | |
| struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev); | |
| if (psmouse->state == PSMOUSE_IGNORE) | |
| return PS2_IGNORE; | |
| if (unlikely((flags & SERIO_TIMEOUT) || | |
| ((flags & SERIO_PARITY) && | |
| !psmouse->protocol->ignore_parity))) { | |
| if (psmouse->state == PSMOUSE_ACTIVATED) | |
| psmouse_warn(psmouse, | |
| "bad data from KBC -%s%s\n", | |
| flags & SERIO_TIMEOUT ? " timeout" : "", | |
| flags & SERIO_PARITY ? " bad parity" : ""); | |
| return PS2_ERROR; | |
| } | |
| if (flags & SERIO_OOB_DATA) { | |
| psmouse_handle_oob_data(psmouse, data); | |
| return PS2_IGNORE; | |
| } | |
| return PS2_PROCESS; | |
| } | |
| static void psmouse_receive_byte(struct ps2dev *ps2dev, u8 data) | |
| { | |
| struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev); | |
| pm_wakeup_event(&ps2dev->serio->dev, 0); | |
| if (psmouse->state <= PSMOUSE_RESYNCING) | |
| return; | |
| if (psmouse->state == PSMOUSE_ACTIVATED && | |
| psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) { | |
| psmouse_info(psmouse, "%s at %s lost synchronization, throwing %d bytes away.\n", | |
| psmouse->name, psmouse->phys, psmouse->pktcnt); | |
| psmouse->badbyte = psmouse->packet[0]; | |
| __psmouse_set_state(psmouse, PSMOUSE_RESYNCING); | |
| schedule_work(&psmouse->resync_work); | |
| return; | |
| } | |
| psmouse->packet[psmouse->pktcnt++] = data; | |
| /* Check if this is a new device announcement (0xAA 0x00) */ | |
| if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) { | |
| if (psmouse->pktcnt == 1) { | |
| psmouse->last = jiffies; | |
| return; | |
| } | |
| if (psmouse->packet[1] == PSMOUSE_RET_ID) { | |
| __psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| serio_reconnect(ps2dev->serio); | |
| return; | |
| } | |
| /* Not a new device, try processing first byte normally */ | |
| psmouse->pktcnt = 1; | |
| if (psmouse_handle_byte(psmouse)) | |
| return; | |
| psmouse->packet[psmouse->pktcnt++] = data; | |
| } | |
| /* | |
| * See if we need to force resync because mouse was idle for | |
| * too long. | |
| */ | |
| if (psmouse->state == PSMOUSE_ACTIVATED && | |
| psmouse->pktcnt == 1 && psmouse->resync_time && | |
| time_after(jiffies, psmouse->last + psmouse->resync_time * HZ)) { | |
| psmouse->badbyte = psmouse->packet[0]; | |
| __psmouse_set_state(psmouse, PSMOUSE_RESYNCING); | |
| schedule_work(&psmouse->resync_work); | |
| return; | |
| } | |
| psmouse->last = jiffies; | |
| psmouse_handle_byte(psmouse); | |
| } | |
| /* | |
| * psmouse_reset() resets the mouse into power-on state. | |
| */ | |
| int psmouse_reset(struct psmouse *psmouse) | |
| { | |
| u8 param[2]; | |
| int error; | |
| error = ps2_command(&psmouse->ps2dev, param, PSMOUSE_CMD_RESET_BAT); | |
| if (error) | |
| return error; | |
| if (param[0] != PSMOUSE_RET_BAT && param[1] != PSMOUSE_RET_ID) | |
| return -EIO; | |
| return 0; | |
| } | |
| /* | |
| * Here we set the mouse resolution. | |
| */ | |
| void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution) | |
| { | |
| static const u8 params[] = { 0, 1, 2, 2, 3 }; | |
| u8 p; | |
| if (resolution == 0 || resolution > 200) | |
| resolution = 200; | |
| p = params[resolution / 50]; | |
| ps2_command(&psmouse->ps2dev, &p, PSMOUSE_CMD_SETRES); | |
| psmouse->resolution = 25 << p; | |
| } | |
| /* | |
| * Here we set the mouse report rate. | |
| */ | |
| static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) | |
| { | |
| static const u8 rates[] = { 200, 100, 80, 60, 40, 20, 10, 0 }; | |
| u8 r; | |
| int i = 0; | |
| while (rates[i] > rate) | |
| i++; | |
| r = rates[i]; | |
| ps2_command(&psmouse->ps2dev, &r, PSMOUSE_CMD_SETRATE); | |
| psmouse->rate = r; | |
| } | |
| /* | |
| * Here we set the mouse scaling. | |
| */ | |
| static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) | |
| { | |
| ps2_command(&psmouse->ps2dev, NULL, | |
| scale == PSMOUSE_SCALE21 ? PSMOUSE_CMD_SETSCALE21 : | |
| PSMOUSE_CMD_SETSCALE11); | |
| } | |
| /* | |
| * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. | |
| */ | |
| static int psmouse_poll(struct psmouse *psmouse) | |
| { | |
| return ps2_command(&psmouse->ps2dev, psmouse->packet, | |
| PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); | |
| } | |
| static bool psmouse_check_pnp_id(const char *id, const char * const ids[]) | |
| { | |
| int i; | |
| for (i = 0; ids[i]; i++) | |
| if (!strcasecmp(id, ids[i])) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids. | |
| */ | |
| bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[]) | |
| { | |
| struct serio *serio = psmouse->ps2dev.serio; | |
| char *p, *fw_id_copy, *save_ptr; | |
| bool found = false; | |
| if (strncmp(serio->firmware_id, "PNP: ", 5)) | |
| return false; | |
| fw_id_copy = kstrndup(&serio->firmware_id[5], | |
| sizeof(serio->firmware_id) - 5, | |
| GFP_KERNEL); | |
| if (!fw_id_copy) | |
| return false; | |
| save_ptr = fw_id_copy; | |
| while ((p = strsep(&fw_id_copy, " ")) != NULL) { | |
| if (psmouse_check_pnp_id(p, ids)) { | |
| found = true; | |
| break; | |
| } | |
| } | |
| kfree(save_ptr); | |
| return found; | |
| } | |
| /* | |
| * Genius NetMouse magic init. | |
| */ | |
| static int genius_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[4]; | |
| param[0] = 3; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11); | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11); | |
| ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11); | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO); | |
| if (param[0] != 0x00 || param[1] != 0x33 || param[2] != 0x55) | |
| return -ENODEV; | |
| if (set_properties) { | |
| __set_bit(BTN_MIDDLE, psmouse->dev->keybit); | |
| __set_bit(BTN_EXTRA, psmouse->dev->keybit); | |
| __set_bit(BTN_SIDE, psmouse->dev->keybit); | |
| __set_bit(REL_WHEEL, psmouse->dev->relbit); | |
| psmouse->vendor = "Genius"; | |
| psmouse->name = "Mouse"; | |
| psmouse->pktsize = 4; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * IntelliMouse magic init. | |
| */ | |
| static int intellimouse_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[2]; | |
| param[0] = 200; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 100; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 80; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); | |
| if (param[0] != 3) | |
| return -ENODEV; | |
| if (set_properties) { | |
| __set_bit(BTN_MIDDLE, psmouse->dev->keybit); | |
| __set_bit(REL_WHEEL, psmouse->dev->relbit); | |
| if (!psmouse->vendor) | |
| psmouse->vendor = "Generic"; | |
| if (!psmouse->name) | |
| psmouse->name = "Wheel Mouse"; | |
| psmouse->pktsize = 4; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Try IntelliMouse/Explorer magic init. | |
| */ | |
| static int im_explorer_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[2]; | |
| intellimouse_detect(psmouse, 0); | |
| param[0] = 200; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 200; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 80; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); | |
| if (param[0] != 4) | |
| return -ENODEV; | |
| /* Magic to enable horizontal scrolling on IntelliMouse 4.0 */ | |
| param[0] = 200; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 80; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 40; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| if (set_properties) { | |
| __set_bit(BTN_MIDDLE, psmouse->dev->keybit); | |
| __set_bit(REL_WHEEL, psmouse->dev->relbit); | |
| __set_bit(REL_HWHEEL, psmouse->dev->relbit); | |
| __set_bit(BTN_SIDE, psmouse->dev->keybit); | |
| __set_bit(BTN_EXTRA, psmouse->dev->keybit); | |
| if (!psmouse->vendor) | |
| psmouse->vendor = "Generic"; | |
| if (!psmouse->name) | |
| psmouse->name = "Explorer Mouse"; | |
| psmouse->pktsize = 4; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Kensington ThinkingMouse / ExpertMouse magic init. | |
| */ | |
| static int thinking_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[2]; | |
| static const u8 seq[] = { 20, 60, 40, 20, 20, 60, 40, 20, 20 }; | |
| int i; | |
| param[0] = 10; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| param[0] = 0; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES); | |
| for (i = 0; i < ARRAY_SIZE(seq); i++) { | |
| param[0] = seq[i]; | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE); | |
| } | |
| ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); | |
| if (param[0] != 2) | |
| return -ENODEV; | |
| if (set_properties) { | |
| __set_bit(BTN_MIDDLE, psmouse->dev->keybit); | |
| __set_bit(BTN_EXTRA, psmouse->dev->keybit); | |
| psmouse->vendor = "Kensington"; | |
| psmouse->name = "ThinkingMouse"; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Bare PS/2 protocol "detection". Always succeeds. | |
| */ | |
| static int ps2bare_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| if (set_properties) { | |
| if (!psmouse->vendor) | |
| psmouse->vendor = "Generic"; | |
| if (!psmouse->name) | |
| psmouse->name = "Mouse"; | |
| /* | |
| * We have no way of figuring true number of buttons so let's | |
| * assume that the device has 3. | |
| */ | |
| input_set_capability(psmouse->dev, EV_KEY, BTN_MIDDLE); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Cortron PS/2 protocol detection. There's no special way to detect it, so it | |
| * must be forced by sysfs protocol writing. | |
| */ | |
| static int cortron_detect(struct psmouse *psmouse, bool set_properties) | |
| { | |
| if (set_properties) { | |
| psmouse->vendor = "Cortron"; | |
| psmouse->name = "PS/2 Trackball"; | |
| __set_bit(BTN_MIDDLE, psmouse->dev->keybit); | |
| __set_bit(BTN_SIDE, psmouse->dev->keybit); | |
| } | |
| return 0; | |
| } | |
| static const struct psmouse_protocol psmouse_protocols[] = { | |
| { | |
| .type = PSMOUSE_PS2, | |
| .name = "PS/2", | |
| .alias = "bare", | |
| .maxproto = true, | |
| .ignore_parity = true, | |
| .detect = ps2bare_detect, | |
| .try_passthru = true, | |
| }, | |
| #ifdef CONFIG_MOUSE_PS2_LOGIPS2PP | |
| { | |
| .type = PSMOUSE_PS2PP, | |
| .name = "PS2++", | |
| .alias = "logitech", | |
| .detect = ps2pp_detect, | |
| }, | |
| #endif | |
| { | |
| .type = PSMOUSE_THINKPS, | |
| .name = "ThinkPS/2", | |
| .alias = "thinkps", | |
| .detect = thinking_detect, | |
| }, | |
| #ifdef CONFIG_MOUSE_PS2_CYPRESS | |
| { | |
| .type = PSMOUSE_CYPRESS, | |
| .name = "CyPS/2", | |
| .alias = "cypress", | |
| .detect = cypress_detect, | |
| .init = cypress_init, | |
| }, | |
| #endif | |
| { | |
| .type = PSMOUSE_GENPS, | |
| .name = "GenPS/2", | |
| .alias = "genius", | |
| .detect = genius_detect, | |
| }, | |
| { | |
| .type = PSMOUSE_IMPS, | |
| .name = "ImPS/2", | |
| .alias = "imps", | |
| .maxproto = true, | |
| .ignore_parity = true, | |
| .detect = intellimouse_detect, | |
| .try_passthru = true, | |
| }, | |
| { | |
| .type = PSMOUSE_IMEX, | |
| .name = "ImExPS/2", | |
| .alias = "exps", | |
| .maxproto = true, | |
| .ignore_parity = true, | |
| .detect = im_explorer_detect, | |
| .try_passthru = true, | |
| }, | |
| #ifdef CONFIG_MOUSE_PS2_SYNAPTICS | |
| { | |
| .type = PSMOUSE_SYNAPTICS, | |
| .name = "SynPS/2", | |
| .alias = "synaptics", | |
| .detect = synaptics_detect, | |
| .init = synaptics_init_absolute, | |
| }, | |
| { | |
| .type = PSMOUSE_SYNAPTICS_RELATIVE, | |
| .name = "SynRelPS/2", | |
| .alias = "synaptics-relative", | |
| .detect = synaptics_detect, | |
| .init = synaptics_init_relative, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS | |
| { | |
| .type = PSMOUSE_SYNAPTICS_SMBUS, | |
| .name = "SynSMBus", | |
| .alias = "synaptics-smbus", | |
| .detect = synaptics_detect, | |
| .init = synaptics_init_smbus, | |
| .smbus_companion = true, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_ALPS | |
| { | |
| .type = PSMOUSE_ALPS, | |
| .name = "AlpsPS/2", | |
| .alias = "alps", | |
| .detect = alps_detect, | |
| .init = alps_init, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_LIFEBOOK | |
| { | |
| .type = PSMOUSE_LIFEBOOK, | |
| .name = "LBPS/2", | |
| .alias = "lifebook", | |
| .detect = lifebook_detect, | |
| .init = lifebook_init, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_TRACKPOINT | |
| { | |
| .type = PSMOUSE_TRACKPOINT, | |
| .name = "TPPS/2", | |
| .alias = "trackpoint", | |
| .detect = trackpoint_detect, | |
| .try_passthru = true, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_TOUCHKIT | |
| { | |
| .type = PSMOUSE_TOUCHKIT_PS2, | |
| .name = "touchkitPS/2", | |
| .alias = "touchkit", | |
| .detect = touchkit_ps2_detect, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_ELANTECH | |
| { | |
| .type = PSMOUSE_ELANTECH, | |
| .name = "ETPS/2", | |
| .alias = "elantech", | |
| .detect = elantech_detect, | |
| .init = elantech_init_ps2, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_ELANTECH_SMBUS | |
| { | |
| .type = PSMOUSE_ELANTECH_SMBUS, | |
| .name = "ETSMBus", | |
| .alias = "elantech-smbus", | |
| .detect = elantech_detect, | |
| .init = elantech_init_smbus, | |
| .smbus_companion = true, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_SENTELIC | |
| { | |
| .type = PSMOUSE_FSP, | |
| .name = "FSPPS/2", | |
| .alias = "fsp", | |
| .detect = fsp_detect, | |
| .init = fsp_init, | |
| }, | |
| #endif | |
| { | |
| .type = PSMOUSE_CORTRON, | |
| .name = "CortronPS/2", | |
| .alias = "cortps", | |
| .detect = cortron_detect, | |
| }, | |
| #ifdef CONFIG_MOUSE_PS2_FOCALTECH | |
| { | |
| .type = PSMOUSE_FOCALTECH, | |
| .name = "FocalTechPS/2", | |
| .alias = "focaltech", | |
| .detect = focaltech_detect, | |
| .init = focaltech_init, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_VMMOUSE | |
| { | |
| .type = PSMOUSE_VMMOUSE, | |
| .name = VMMOUSE_PSNAME, | |
| .alias = "vmmouse", | |
| .detect = vmmouse_detect, | |
| .init = vmmouse_init, | |
| }, | |
| #endif | |
| #ifdef CONFIG_MOUSE_PS2_BYD | |
| { | |
| .type = PSMOUSE_BYD, | |
| .name = "BYDPS/2", | |
| .alias = "byd", | |
| .detect = byd_detect, | |
| .init = byd_init, | |
| }, | |
| #endif | |
| { | |
| .type = PSMOUSE_AUTO, | |
| .name = "auto", | |
| .alias = "any", | |
| .maxproto = true, | |
| }, | |
| }; | |
| static const struct psmouse_protocol *__psmouse_protocol_by_type(enum psmouse_type type) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(psmouse_protocols); i++) | |
| if (psmouse_protocols[i].type == type) | |
| return &psmouse_protocols[i]; | |
| return NULL; | |
| } | |
| static const struct psmouse_protocol *psmouse_protocol_by_type(enum psmouse_type type) | |
| { | |
| const struct psmouse_protocol *proto; | |
| proto = __psmouse_protocol_by_type(type); | |
| if (proto) | |
| return proto; | |
| WARN_ON(1); | |
| return &psmouse_protocols[0]; | |
| } | |
| static const struct psmouse_protocol *psmouse_protocol_by_name(const char *name, size_t len) | |
| { | |
| const struct psmouse_protocol *p; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(psmouse_protocols); i++) { | |
| p = &psmouse_protocols[i]; | |
| if ((strlen(p->name) == len && !strncmp(p->name, name, len)) || | |
| (strlen(p->alias) == len && !strncmp(p->alias, name, len))) | |
| return &psmouse_protocols[i]; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * Apply default settings to the psmouse structure. Most of them will | |
| * be overridden by individual protocol initialization routines. | |
| */ | |
| static void psmouse_apply_defaults(struct psmouse *psmouse) | |
| { | |
| struct input_dev *input_dev = psmouse->dev; | |
| bitmap_zero(input_dev->evbit, EV_CNT); | |
| bitmap_zero(input_dev->keybit, KEY_CNT); | |
| bitmap_zero(input_dev->relbit, REL_CNT); | |
| bitmap_zero(input_dev->absbit, ABS_CNT); | |
| bitmap_zero(input_dev->mscbit, MSC_CNT); | |
| input_set_capability(input_dev, EV_KEY, BTN_LEFT); | |
| input_set_capability(input_dev, EV_KEY, BTN_RIGHT); | |
| input_set_capability(input_dev, EV_REL, REL_X); | |
| input_set_capability(input_dev, EV_REL, REL_Y); | |
| __set_bit(INPUT_PROP_POINTER, input_dev->propbit); | |
| psmouse->protocol = &psmouse_protocols[0]; | |
| psmouse->set_rate = psmouse_set_rate; | |
| psmouse->set_resolution = psmouse_set_resolution; | |
| psmouse->set_scale = psmouse_set_scale; | |
| psmouse->poll = psmouse_poll; | |
| psmouse->protocol_handler = psmouse_process_byte; | |
| psmouse->pktsize = 3; | |
| psmouse->reconnect = NULL; | |
| psmouse->fast_reconnect = NULL; | |
| psmouse->disconnect = NULL; | |
| psmouse->cleanup = NULL; | |
| psmouse->pt_activate = NULL; | |
| psmouse->pt_deactivate = NULL; | |
| } | |
| static bool psmouse_do_detect(int (*detect)(struct psmouse *, bool), | |
| struct psmouse *psmouse, bool allow_passthrough, | |
| bool set_properties) | |
| { | |
| if (psmouse->ps2dev.serio->id.type == SERIO_PS_PSTHRU && | |
| !allow_passthrough) { | |
| return false; | |
| } | |
| if (set_properties) | |
| psmouse_apply_defaults(psmouse); | |
| return detect(psmouse, set_properties) == 0; | |
| } | |
| static bool psmouse_try_protocol(struct psmouse *psmouse, | |
| enum psmouse_type type, | |
| unsigned int *max_proto, | |
| bool set_properties, bool init_allowed) | |
| { | |
| const struct psmouse_protocol *proto; | |
| proto = __psmouse_protocol_by_type(type); | |
| if (!proto) | |
| return false; | |
| if (!psmouse_do_detect(proto->detect, psmouse, proto->try_passthru, | |
| set_properties)) | |
| return false; | |
| if (set_properties && proto->init && init_allowed) { | |
| if (proto->init(psmouse) != 0) { | |
| /* | |
| * We detected device, but init failed. Adjust | |
| * max_proto so we only try standard protocols. | |
| */ | |
| if (*max_proto > PSMOUSE_IMEX) | |
| *max_proto = PSMOUSE_IMEX; | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| /* | |
| * psmouse_extensions() probes for any extensions to the basic PS/2 protocol | |
| * the mouse may have. | |
| */ | |
| static int psmouse_extensions(struct psmouse *psmouse, | |
| unsigned int max_proto, bool set_properties) | |
| { | |
| bool synaptics_hardware = false; | |
| int ret; | |
| /* | |
| * Always check for focaltech, this is safe as it uses pnp-id | |
| * matching. | |
| */ | |
| if (psmouse_do_detect(focaltech_detect, | |
| psmouse, false, set_properties)) { | |
| if (max_proto > PSMOUSE_IMEX && | |
| IS_ENABLED(CONFIG_MOUSE_PS2_FOCALTECH) && | |
| (!set_properties || focaltech_init(psmouse) == 0)) { | |
| return PSMOUSE_FOCALTECH; | |
| } | |
| /* | |
| * Restrict psmouse_max_proto so that psmouse_initialize() | |
| * does not try to reset rate and resolution, because even | |
| * that upsets the device. | |
| * This also causes us to basically fall through to basic | |
| * protocol detection, where we fully reset the mouse, | |
| * and set it up as bare PS/2 protocol device. | |
| */ | |
| psmouse_max_proto = max_proto = PSMOUSE_PS2; | |
| } | |
| /* | |
| * We always check for LifeBook because it does not disturb mouse | |
| * (it only checks DMI information). | |
| */ | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_LIFEBOOK, &max_proto, | |
| set_properties, max_proto > PSMOUSE_IMEX)) | |
| return PSMOUSE_LIFEBOOK; | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_VMMOUSE, &max_proto, | |
| set_properties, max_proto > PSMOUSE_IMEX)) | |
| return PSMOUSE_VMMOUSE; | |
| /* | |
| * Try Kensington ThinkingMouse (we try first, because Synaptics | |
| * probe upsets the ThinkingMouse). | |
| */ | |
| if (max_proto > PSMOUSE_IMEX && | |
| psmouse_try_protocol(psmouse, PSMOUSE_THINKPS, &max_proto, | |
| set_properties, true)) { | |
| return PSMOUSE_THINKPS; | |
| } | |
| /* | |
| * Try Synaptics TouchPad. Note that probing is done even if | |
| * Synaptics protocol support is disabled in config - we need to | |
| * know if it is Synaptics so we can reset it properly after | |
| * probing for IntelliMouse. | |
| */ | |
| if (max_proto > PSMOUSE_PS2 && | |
| psmouse_do_detect(synaptics_detect, | |
| psmouse, false, set_properties)) { | |
| synaptics_hardware = true; | |
| if (max_proto > PSMOUSE_IMEX) { | |
| /* | |
| * Try activating protocol, but check if support is | |
| * enabled first, since we try detecting Synaptics | |
| * even when protocol is disabled. | |
| */ | |
| if (IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS) || | |
| IS_ENABLED(CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS)) { | |
| if (!set_properties) | |
| return PSMOUSE_SYNAPTICS; | |
| ret = synaptics_init(psmouse); | |
| if (ret >= 0) | |
| return ret; | |
| } | |
| /* | |
| * Some Synaptics touchpads can emulate extended | |
| * protocols (like IMPS/2). Unfortunately | |
| * Logitech/Genius probes confuse some firmware | |
| * versions so we'll have to skip them. | |
| */ | |
| max_proto = PSMOUSE_IMEX; | |
| } | |
| /* | |
| * Make sure that touchpad is in relative mode, gestures | |
| * (taps) are enabled. | |
| */ | |
| synaptics_reset(psmouse); | |
| } | |
| /* | |
| * Try Cypress Trackpad. We must try it before Finger Sensing Pad | |
| * because Finger Sensing Pad probe upsets some modules of Cypress | |
| * Trackpads. | |
| */ | |
| if (max_proto > PSMOUSE_IMEX && | |
| psmouse_try_protocol(psmouse, PSMOUSE_CYPRESS, &max_proto, | |
| set_properties, true)) { | |
| return PSMOUSE_CYPRESS; | |
| } | |
| /* Try ALPS TouchPad */ | |
| if (max_proto > PSMOUSE_IMEX) { | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_ALPS, | |
| &max_proto, set_properties, true)) | |
| return PSMOUSE_ALPS; | |
| } | |
| /* Try Elantech touchpad */ | |
| if (max_proto > PSMOUSE_IMEX && | |
| psmouse_try_protocol(psmouse, PSMOUSE_ELANTECH, | |
| &max_proto, set_properties, false)) { | |
| if (!set_properties) | |
| return PSMOUSE_ELANTECH; | |
| ret = elantech_init(psmouse); | |
| if (ret >= 0) | |
| return ret; | |
| } | |
| if (max_proto > PSMOUSE_IMEX) { | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_GENPS, | |
| &max_proto, set_properties, true)) | |
| return PSMOUSE_GENPS; | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_PS2PP, | |
| &max_proto, set_properties, true)) | |
| return PSMOUSE_PS2PP; | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_TRACKPOINT, | |
| &max_proto, set_properties, true)) | |
| return PSMOUSE_TRACKPOINT; | |
| if (psmouse_try_protocol(psmouse, PSMOUSE_TOUCHKIT_PS2, | |
| &max_proto, set_properties, true)) | |
| return PSMOUSE_TOUCHKIT_PS2; | |
| } | |
| /* | |
| * Try Finger Sensing Pad. We do it here because its probe upsets | |
| * Trackpoint devices (causing TP_READ_ID command to time out). | |
| */ | |
| if (max_proto > PSMOUSE_IMEX && | |
| psmouse_try_protocol(psmouse, PSMOUSE_FSP, | |
| &max_proto, set_properties, true)) { | |
| return PSMOUSE_FSP; | |
| } | |
| /* | |
| * Reset to defaults in case the device got confused by extended | |
| * protocol probes. Note that we follow up with full reset because | |
| * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. | |
| */ | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| psmouse_reset(psmouse); | |
| if (max_proto >= PSMOUSE_IMEX && | |
| psmouse_try_protocol(psmouse, PSMOUSE_IMEX, | |
| &max_proto, set_properties, true)) { | |
| return PSMOUSE_IMEX; | |
| } | |
| if (max_proto >= PSMOUSE_IMPS && | |
| psmouse_try_protocol(psmouse, PSMOUSE_IMPS, | |
| &max_proto, set_properties, true)) { | |
| return PSMOUSE_IMPS; | |
| } | |
| /* | |
| * Okay, all failed, we have a standard mouse here. The number of | |
| * the buttons is still a question, though. We assume 3. | |
| */ | |
| psmouse_try_protocol(psmouse, PSMOUSE_PS2, | |
| &max_proto, set_properties, true); | |
| if (synaptics_hardware) { | |
| /* | |
| * We detected Synaptics hardware but it did not respond to | |
| * IMPS/2 probes. We need to reset the touchpad because if | |
| * there is a track point on the pass through port it could | |
| * get disabled while probing for protocol extensions. | |
| */ | |
| psmouse_reset(psmouse); | |
| } | |
| return PSMOUSE_PS2; | |
| } | |
| /* | |
| * psmouse_probe() probes for a PS/2 mouse. | |
| */ | |
| static int psmouse_probe(struct psmouse *psmouse) | |
| { | |
| struct ps2dev *ps2dev = &psmouse->ps2dev; | |
| u8 param[2]; | |
| int error; | |
| /* | |
| * First, we check if it's a mouse. It should send 0x00 or 0x03 in | |
| * case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. | |
| * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and | |
| * subsequent ID queries, probably due to a firmware bug. | |
| */ | |
| param[0] = 0xa5; | |
| error = ps2_command(ps2dev, param, PSMOUSE_CMD_GETID); | |
| if (error) | |
| return error; | |
| if (param[0] != 0x00 && param[0] != 0x03 && | |
| param[0] != 0x04 && param[0] != 0xff) | |
| return -ENODEV; | |
| /* | |
| * Then we reset and disable the mouse so that it doesn't generate | |
| * events. | |
| */ | |
| error = ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| if (error) | |
| psmouse_warn(psmouse, "Failed to reset mouse on %s: %d\n", | |
| ps2dev->serio->phys, error); | |
| return 0; | |
| } | |
| /* | |
| * psmouse_initialize() initializes the mouse to a sane state. | |
| */ | |
| static void psmouse_initialize(struct psmouse *psmouse) | |
| { | |
| /* | |
| * We set the mouse report rate, resolution and scaling. | |
| */ | |
| if (psmouse_max_proto != PSMOUSE_PS2) { | |
| psmouse->set_rate(psmouse, psmouse->rate); | |
| psmouse->set_resolution(psmouse, psmouse->resolution); | |
| psmouse->set_scale(psmouse, PSMOUSE_SCALE11); | |
| } | |
| } | |
| /* | |
| * psmouse_activate() enables the mouse so that we get motion reports from it. | |
| */ | |
| int psmouse_activate(struct psmouse *psmouse) | |
| { | |
| if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { | |
| psmouse_warn(psmouse, "Failed to enable mouse on %s\n", | |
| psmouse->ps2dev.serio->phys); | |
| return -1; | |
| } | |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); | |
| return 0; | |
| } | |
| /* | |
| * psmouse_deactivate() puts the mouse into poll mode so that we don't get | |
| * motion reports from it unless we explicitly request it. | |
| */ | |
| int psmouse_deactivate(struct psmouse *psmouse) | |
| { | |
| int error; | |
| error = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE); | |
| if (error) { | |
| psmouse_warn(psmouse, "Failed to deactivate mouse on %s: %d\n", | |
| psmouse->ps2dev.serio->phys, error); | |
| return error; | |
| } | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| return 0; | |
| } | |
| /* | |
| * psmouse_resync() attempts to re-validate current protocol. | |
| */ | |
| static void psmouse_resync(struct work_struct *work) | |
| { | |
| struct psmouse *parent = NULL, *psmouse = | |
| container_of(work, struct psmouse, resync_work); | |
| struct serio *serio = psmouse->ps2dev.serio; | |
| psmouse_ret_t rc = PSMOUSE_GOOD_DATA; | |
| bool failed = false, enabled = false; | |
| int i; | |
| mutex_lock(&psmouse_mutex); | |
| if (psmouse->state != PSMOUSE_RESYNCING) | |
| goto out; | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| /* | |
| * Some mice don't ACK commands sent while they are in the middle of | |
| * transmitting motion packet. To avoid delay we use ps2_sendbyte() | |
| * instead of ps2_command() which would wait for 200ms for an ACK | |
| * that may never come. | |
| * As an additional quirk ALPS touchpads may not only forget to ACK | |
| * disable command but will stop reporting taps, so if we see that | |
| * mouse at least once ACKs disable we will do full reconnect if ACK | |
| * is missing. | |
| */ | |
| psmouse->num_resyncs++; | |
| if (ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, 20)) { | |
| if (psmouse->num_resyncs < 3 || psmouse->acks_disable_command) | |
| failed = true; | |
| } else | |
| psmouse->acks_disable_command = true; | |
| /* | |
| * Poll the mouse. If it was reset the packet will be shorter than | |
| * psmouse->pktsize and ps2_command will fail. We do not expect and | |
| * do not handle scenario when mouse "upgrades" its protocol while | |
| * disconnected since it would require additional delay. If we ever | |
| * see a mouse that does it we'll adjust the code. | |
| */ | |
| if (!failed) { | |
| if (psmouse->poll(psmouse)) | |
| failed = true; | |
| else { | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| for (i = 0; i < psmouse->pktsize; i++) { | |
| psmouse->pktcnt++; | |
| rc = psmouse->protocol_handler(psmouse); | |
| if (rc != PSMOUSE_GOOD_DATA) | |
| break; | |
| } | |
| if (rc != PSMOUSE_FULL_PACKET) | |
| failed = true; | |
| psmouse_set_state(psmouse, PSMOUSE_RESYNCING); | |
| } | |
| } | |
| /* | |
| * Now try to enable mouse. We try to do that even if poll failed | |
| * and also repeat our attempts 5 times, otherwise we may be left | |
| * out with disabled mouse. | |
| */ | |
| for (i = 0; i < 5; i++) { | |
| if (!ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { | |
| enabled = true; | |
| break; | |
| } | |
| msleep(200); | |
| } | |
| if (!enabled) { | |
| psmouse_warn(psmouse, "failed to re-enable mouse on %s\n", | |
| psmouse->ps2dev.serio->phys); | |
| failed = true; | |
| } | |
| if (failed) { | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| psmouse_info(psmouse, | |
| "resync failed, issuing reconnect request\n"); | |
| serio_reconnect(serio); | |
| } else | |
| psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); | |
| if (parent) | |
| psmouse_activate(parent); | |
| out: | |
| mutex_unlock(&psmouse_mutex); | |
| } | |
| /* | |
| * psmouse_cleanup() resets the mouse into power-on state. | |
| */ | |
| static void psmouse_cleanup(struct serio *serio) | |
| { | |
| struct psmouse *psmouse = psmouse_from_serio(serio); | |
| struct psmouse *parent = NULL; | |
| mutex_lock(&psmouse_mutex); | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| /* | |
| * Disable stream mode so cleanup routine can proceed undisturbed. | |
| */ | |
| if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) | |
| psmouse_warn(psmouse, "Failed to disable mouse on %s\n", | |
| psmouse->ps2dev.serio->phys); | |
| if (psmouse->cleanup) | |
| psmouse->cleanup(psmouse); | |
| /* | |
| * Reset the mouse to defaults (bare PS/2 protocol). | |
| */ | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS); | |
| /* | |
| * Some boxes, such as HP nx7400, get terribly confused if mouse | |
| * is not fully enabled before suspending/shutting down. | |
| */ | |
| ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); | |
| if (parent) { | |
| if (parent->pt_deactivate) | |
| parent->pt_deactivate(parent); | |
| psmouse_activate(parent); | |
| } | |
| mutex_unlock(&psmouse_mutex); | |
| } | |
| /* | |
| * psmouse_disconnect() closes and frees. | |
| */ | |
| static void psmouse_disconnect(struct serio *serio) | |
| { | |
| struct psmouse *psmouse = psmouse_from_serio(serio); | |
| struct psmouse *parent = NULL; | |
| mutex_lock(&psmouse_mutex); | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| /* make sure we don't have a resync in progress */ | |
| mutex_unlock(&psmouse_mutex); | |
| disable_work_sync(&psmouse->resync_work); | |
| mutex_lock(&psmouse_mutex); | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| if (psmouse->disconnect) | |
| psmouse->disconnect(psmouse); | |
| if (parent && parent->pt_deactivate) | |
| parent->pt_deactivate(parent); | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| serio_close(serio); | |
| serio_set_drvdata(serio, NULL); | |
| if (psmouse->dev) | |
| input_unregister_device(psmouse->dev); | |
| kfree(psmouse); | |
| if (parent) | |
| psmouse_activate(parent); | |
| mutex_unlock(&psmouse_mutex); | |
| } | |
| static int psmouse_switch_protocol(struct psmouse *psmouse, | |
| const struct psmouse_protocol *proto) | |
| { | |
| const struct psmouse_protocol *selected_proto; | |
| struct input_dev *input_dev = psmouse->dev; | |
| enum psmouse_type type; | |
| input_dev->dev.parent = &psmouse->ps2dev.serio->dev; | |
| if (proto && (proto->detect || proto->init)) { | |
| psmouse_apply_defaults(psmouse); | |
| if (proto->detect && proto->detect(psmouse, true) < 0) | |
| return -1; | |
| if (proto->init && proto->init(psmouse) < 0) | |
| return -1; | |
| selected_proto = proto; | |
| } else { | |
| type = psmouse_extensions(psmouse, psmouse_max_proto, true); | |
| selected_proto = psmouse_protocol_by_type(type); | |
| } | |
| psmouse->protocol = selected_proto; | |
| /* | |
| * If mouse's packet size is 3 there is no point in polling the | |
| * device in hopes to detect protocol reset - we won't get less | |
| * than 3 bytes response anyhow. | |
| */ | |
| if (psmouse->pktsize == 3) | |
| psmouse->resync_time = 0; | |
| /* | |
| * Some smart KVMs fake response to POLL command returning just | |
| * 3 bytes and messing up our resync logic, so if initial poll | |
| * fails we won't try polling the device anymore. Hopefully | |
| * such KVM will maintain initially selected protocol. | |
| */ | |
| if (psmouse->resync_time && psmouse->poll(psmouse)) | |
| psmouse->resync_time = 0; | |
| snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s", | |
| selected_proto->name, psmouse->vendor, psmouse->name); | |
| input_dev->name = psmouse->devname; | |
| input_dev->phys = psmouse->phys; | |
| input_dev->id.bustype = BUS_I8042; | |
| input_dev->id.vendor = 0x0002; | |
| input_dev->id.product = psmouse->protocol->type; | |
| input_dev->id.version = psmouse->model; | |
| return 0; | |
| } | |
| /* | |
| * psmouse_connect() is a callback from the serio module when | |
| * an unhandled serio port is found. | |
| */ | |
| static int psmouse_connect(struct serio *serio, struct serio_driver *drv) | |
| { | |
| struct psmouse *psmouse, *parent = NULL; | |
| struct input_dev *input_dev; | |
| int retval = 0, error = -ENOMEM; | |
| mutex_lock(&psmouse_mutex); | |
| /* | |
| * If this is a pass-through port deactivate parent so the device | |
| * connected to this port can be successfully identified | |
| */ | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| psmouse = kzalloc_obj(*psmouse); | |
| input_dev = input_allocate_device(); | |
| if (!psmouse || !input_dev) | |
| goto err_free; | |
| ps2_init(&psmouse->ps2dev, serio, | |
| psmouse_pre_receive_byte, psmouse_receive_byte); | |
| INIT_WORK(&psmouse->resync_work, psmouse_resync); | |
| psmouse->dev = input_dev; | |
| scnprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys); | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| error = serio_open(serio, drv); | |
| if (error) | |
| goto err_clear_drvdata; | |
| /* give PT device some time to settle down before probing */ | |
| if (serio->id.type == SERIO_PS_PSTHRU) | |
| usleep_range(10000, 15000); | |
| if (psmouse_probe(psmouse) < 0) { | |
| error = -ENODEV; | |
| goto err_close_serio; | |
| } | |
| psmouse->rate = psmouse_rate; | |
| psmouse->resolution = psmouse_resolution; | |
| psmouse->resetafter = psmouse_resetafter; | |
| psmouse->resync_time = parent ? 0 : psmouse_resync_time; | |
| psmouse->smartscroll = psmouse_smartscroll; | |
| psmouse_switch_protocol(psmouse, NULL); | |
| if (!psmouse->protocol->smbus_companion) { | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| psmouse_initialize(psmouse); | |
| error = input_register_device(input_dev); | |
| if (error) | |
| goto err_protocol_disconnect; | |
| } else { | |
| /* Smbus companion will be reporting events, not us. */ | |
| input_free_device(input_dev); | |
| psmouse->dev = input_dev = NULL; | |
| } | |
| if (parent && parent->pt_activate) | |
| parent->pt_activate(parent); | |
| /* | |
| * PS/2 devices having SMBus companions should stay disabled | |
| * on PS/2 side, in order to have SMBus part operable. | |
| */ | |
| if (!psmouse->protocol->smbus_companion) | |
| psmouse_activate(psmouse); | |
| out: | |
| /* If this is a pass-through port the parent needs to be re-activated */ | |
| if (parent) | |
| psmouse_activate(parent); | |
| mutex_unlock(&psmouse_mutex); | |
| return retval; | |
| err_protocol_disconnect: | |
| if (psmouse->disconnect) | |
| psmouse->disconnect(psmouse); | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| err_close_serio: | |
| serio_close(serio); | |
| err_clear_drvdata: | |
| serio_set_drvdata(serio, NULL); | |
| err_free: | |
| input_free_device(input_dev); | |
| kfree(psmouse); | |
| retval = error; | |
| goto out; | |
| } | |
| static int __psmouse_reconnect(struct serio *serio, bool fast_reconnect) | |
| { | |
| struct psmouse *psmouse = psmouse_from_serio(serio); | |
| struct psmouse *parent = NULL; | |
| int (*reconnect_handler)(struct psmouse *); | |
| enum psmouse_type type; | |
| int rc = -1; | |
| mutex_lock(&psmouse_mutex); | |
| if (fast_reconnect) { | |
| reconnect_handler = psmouse->fast_reconnect; | |
| if (!reconnect_handler) { | |
| rc = -ENOENT; | |
| goto out_unlock; | |
| } | |
| } else { | |
| reconnect_handler = psmouse->reconnect; | |
| } | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| if (reconnect_handler) { | |
| if (reconnect_handler(psmouse)) | |
| goto out; | |
| } else { | |
| psmouse_reset(psmouse); | |
| if (psmouse_probe(psmouse) < 0) | |
| goto out; | |
| type = psmouse_extensions(psmouse, psmouse_max_proto, false); | |
| if (psmouse->protocol->type != type) | |
| goto out; | |
| } | |
| /* | |
| * OK, the device type (and capabilities) match the old one, | |
| * we can continue using it, complete initialization | |
| */ | |
| if (!psmouse->protocol->smbus_companion) { | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| psmouse_initialize(psmouse); | |
| } | |
| if (parent && parent->pt_activate) | |
| parent->pt_activate(parent); | |
| /* | |
| * PS/2 devices having SMBus companions should stay disabled | |
| * on PS/2 side, in order to have SMBus part operable. | |
| */ | |
| if (!psmouse->protocol->smbus_companion) | |
| psmouse_activate(psmouse); | |
| rc = 0; | |
| out: | |
| /* If this is a pass-through port the parent waits to be activated */ | |
| if (parent) | |
| psmouse_activate(parent); | |
| out_unlock: | |
| mutex_unlock(&psmouse_mutex); | |
| return rc; | |
| } | |
| static int psmouse_reconnect(struct serio *serio) | |
| { | |
| return __psmouse_reconnect(serio, false); | |
| } | |
| static int psmouse_fast_reconnect(struct serio *serio) | |
| { | |
| return __psmouse_reconnect(serio, true); | |
| } | |
| static struct serio_device_id psmouse_serio_ids[] = { | |
| { | |
| .type = SERIO_8042, | |
| .proto = SERIO_ANY, | |
| .id = SERIO_ANY, | |
| .extra = SERIO_ANY, | |
| }, | |
| { | |
| .type = SERIO_PS_PSTHRU, | |
| .proto = SERIO_ANY, | |
| .id = SERIO_ANY, | |
| .extra = SERIO_ANY, | |
| }, | |
| { 0 } | |
| }; | |
| MODULE_DEVICE_TABLE(serio, psmouse_serio_ids); | |
| static struct serio_driver psmouse_drv = { | |
| .driver = { | |
| .name = "psmouse", | |
| .dev_groups = psmouse_dev_groups, | |
| }, | |
| .description = DRIVER_DESC, | |
| .id_table = psmouse_serio_ids, | |
| .interrupt = ps2_interrupt, | |
| .connect = psmouse_connect, | |
| .reconnect = psmouse_reconnect, | |
| .fast_reconnect = psmouse_fast_reconnect, | |
| .disconnect = psmouse_disconnect, | |
| .cleanup = psmouse_cleanup, | |
| }; | |
| ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct serio *serio = to_serio_port(dev); | |
| struct psmouse_attribute *attr = to_psmouse_attr(devattr); | |
| struct psmouse *psmouse = psmouse_from_serio(serio); | |
| if (psmouse->protocol->smbus_companion && | |
| devattr != &psmouse_attr_protocol.dattr) | |
| return -ENOENT; | |
| return attr->show(psmouse, attr->data, buf); | |
| } | |
| ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr, | |
| const char *buf, size_t count) | |
| { | |
| struct serio *serio = to_serio_port(dev); | |
| struct psmouse_attribute *attr = to_psmouse_attr(devattr); | |
| struct psmouse *psmouse, *parent = NULL; | |
| int retval; | |
| retval = mutex_lock_interruptible(&psmouse_mutex); | |
| if (retval) | |
| goto out; | |
| psmouse = psmouse_from_serio(serio); | |
| if (psmouse->protocol->smbus_companion && | |
| devattr != &psmouse_attr_protocol.dattr) { | |
| retval = -ENOENT; | |
| goto out_unlock; | |
| } | |
| if (attr->protect) { | |
| if (psmouse->state == PSMOUSE_IGNORE) { | |
| retval = -ENODEV; | |
| goto out_unlock; | |
| } | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| psmouse_deactivate(parent); | |
| } | |
| if (!psmouse->protocol->smbus_companion) | |
| psmouse_deactivate(psmouse); | |
| } | |
| retval = attr->set(psmouse, attr->data, buf, count); | |
| if (attr->protect) { | |
| if (retval != -ENODEV && !psmouse->protocol->smbus_companion) | |
| psmouse_activate(psmouse); | |
| if (parent) | |
| psmouse_activate(parent); | |
| } | |
| out_unlock: | |
| mutex_unlock(&psmouse_mutex); | |
| out: | |
| return retval; | |
| } | |
| static ssize_t psmouse_show_int_attr(struct psmouse *psmouse, void *offset, char *buf) | |
| { | |
| unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset); | |
| return sprintf(buf, "%u\n", *field); | |
| } | |
| static ssize_t psmouse_set_int_attr(struct psmouse *psmouse, void *offset, const char *buf, size_t count) | |
| { | |
| unsigned int *field = (unsigned int *)((char *)psmouse + (size_t)offset); | |
| unsigned int value; | |
| int err; | |
| err = kstrtouint(buf, 10, &value); | |
| if (err) | |
| return err; | |
| *field = value; | |
| return count; | |
| } | |
| static ssize_t psmouse_attr_show_protocol(struct psmouse *psmouse, void *data, char *buf) | |
| { | |
| return sprintf(buf, "%s\n", psmouse->protocol->name); | |
| } | |
| static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, const char *buf, size_t count) | |
| { | |
| struct serio *serio = psmouse->ps2dev.serio; | |
| struct psmouse *parent = NULL; | |
| struct input_dev *old_dev, *new_dev; | |
| const struct psmouse_protocol *proto, *old_proto; | |
| int error; | |
| int retry = 0; | |
| proto = psmouse_protocol_by_name(buf, count); | |
| if (!proto) | |
| return -EINVAL; | |
| if (psmouse->protocol == proto) | |
| return count; | |
| new_dev = input_allocate_device(); | |
| if (!new_dev) | |
| return -ENOMEM; | |
| while (!list_empty(&serio->children)) { | |
| if (++retry > 3) { | |
| psmouse_warn(psmouse, | |
| "failed to destroy children ports, protocol change aborted.\n"); | |
| input_free_device(new_dev); | |
| return -EIO; | |
| } | |
| mutex_unlock(&psmouse_mutex); | |
| serio_unregister_child_port(serio); | |
| mutex_lock(&psmouse_mutex); | |
| if (serio->drv != &psmouse_drv) { | |
| input_free_device(new_dev); | |
| return -ENODEV; | |
| } | |
| if (psmouse->protocol == proto) { | |
| input_free_device(new_dev); | |
| return count; /* switched by other thread */ | |
| } | |
| } | |
| if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) { | |
| parent = psmouse_from_serio(serio->parent); | |
| if (parent->pt_deactivate) | |
| parent->pt_deactivate(parent); | |
| } | |
| old_dev = psmouse->dev; | |
| old_proto = psmouse->protocol; | |
| if (psmouse->disconnect) | |
| psmouse->disconnect(psmouse); | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| psmouse->dev = new_dev; | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| if (psmouse_switch_protocol(psmouse, proto) < 0) { | |
| psmouse_reset(psmouse); | |
| /* default to PSMOUSE_PS2 */ | |
| psmouse_switch_protocol(psmouse, &psmouse_protocols[0]); | |
| } | |
| psmouse_initialize(psmouse); | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| if (psmouse->protocol->smbus_companion) { | |
| input_free_device(psmouse->dev); | |
| psmouse->dev = NULL; | |
| } else { | |
| error = input_register_device(psmouse->dev); | |
| if (error) { | |
| if (psmouse->disconnect) | |
| psmouse->disconnect(psmouse); | |
| psmouse_set_state(psmouse, PSMOUSE_IGNORE); | |
| input_free_device(new_dev); | |
| psmouse->dev = old_dev; | |
| psmouse_set_state(psmouse, PSMOUSE_INITIALIZING); | |
| psmouse_switch_protocol(psmouse, old_proto); | |
| psmouse_initialize(psmouse); | |
| psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); | |
| return error; | |
| } | |
| } | |
| if (old_dev) | |
| input_unregister_device(old_dev); | |
| if (parent && parent->pt_activate) | |
| parent->pt_activate(parent); | |
| return count; | |
| } | |
| static ssize_t psmouse_attr_set_rate(struct psmouse *psmouse, void *data, const char *buf, size_t count) | |
| { | |
| unsigned int value; | |
| int err; | |
| err = kstrtouint(buf, 10, &value); | |
| if (err) | |
| return err; | |
| psmouse->set_rate(psmouse, value); | |
| return count; | |
| } | |
| static ssize_t psmouse_attr_set_resolution(struct psmouse *psmouse, void *data, const char *buf, size_t count) | |
| { | |
| unsigned int value; | |
| int err; | |
| err = kstrtouint(buf, 10, &value); | |
| if (err) | |
| return err; | |
| psmouse->set_resolution(psmouse, value); | |
| return count; | |
| } | |
| static int psmouse_set_maxproto(const char *val, const struct kernel_param *kp) | |
| { | |
| const struct psmouse_protocol *proto; | |
| if (!val) | |
| return -EINVAL; | |
| proto = psmouse_protocol_by_name(val, strlen(val)); | |
| if (!proto || !proto->maxproto) | |
| return -EINVAL; | |
| *((unsigned int *)kp->arg) = proto->type; | |
| return 0; | |
| } | |
| static int psmouse_get_maxproto(char *buffer, const struct kernel_param *kp) | |
| { | |
| int type = *((unsigned int *)kp->arg); | |
| return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name); | |
| } | |
| static int __init psmouse_init(void) | |
| { | |
| int err; | |
| lifebook_module_init(); | |
| synaptics_module_init(); | |
| err = psmouse_smbus_module_init(); | |
| if (err) | |
| return err; | |
| err = serio_register_driver(&psmouse_drv); | |
| if (err) | |
| goto err_smbus_exit; | |
| return 0; | |
| err_smbus_exit: | |
| psmouse_smbus_module_exit(); | |
| return err; | |
| } | |
| static void __exit psmouse_exit(void) | |
| { | |
| serio_unregister_driver(&psmouse_drv); | |
| psmouse_smbus_module_exit(); | |
| } | |
| module_init(psmouse_init); | |
| module_exit(psmouse_exit); |