| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * linux/drivers/input/serio/sa1111ps2.c | |
| * | |
| * Copyright (C) 2002 Russell King | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/input.h> | |
| #include <linux/serio.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <asm/io.h> | |
| #include <asm/hardware/sa1111.h> | |
| #define PS2CR 0x0000 | |
| #define PS2STAT 0x0004 | |
| #define PS2DATA 0x0008 | |
| #define PS2CLKDIV 0x000c | |
| #define PS2PRECNT 0x0010 | |
| #define PS2CR_ENA 0x08 | |
| #define PS2CR_FKD 0x02 | |
| #define PS2CR_FKC 0x01 | |
| #define PS2STAT_STP 0x0100 | |
| #define PS2STAT_TXE 0x0080 | |
| #define PS2STAT_TXB 0x0040 | |
| #define PS2STAT_RXF 0x0020 | |
| #define PS2STAT_RXB 0x0010 | |
| #define PS2STAT_ENA 0x0008 | |
| #define PS2STAT_RXP 0x0004 | |
| #define PS2STAT_KBD 0x0002 | |
| #define PS2STAT_KBC 0x0001 | |
| struct ps2if { | |
| struct serio *io; | |
| struct sa1111_dev *dev; | |
| void __iomem *base; | |
| int rx_irq; | |
| int tx_irq; | |
| unsigned int open; | |
| spinlock_t lock; | |
| unsigned int head; | |
| unsigned int tail; | |
| unsigned char buf[4]; | |
| }; | |
| /* | |
| * Read all bytes waiting in the PS2 port. There should be | |
| * at the most one, but we loop for safety. If there was a | |
| * framing error, we have to manually clear the status. | |
| */ | |
| static irqreturn_t ps2_rxint(int irq, void *dev_id) | |
| { | |
| struct ps2if *ps2if = dev_id; | |
| unsigned int scancode, flag, status; | |
| status = readl_relaxed(ps2if->base + PS2STAT); | |
| while (status & PS2STAT_RXF) { | |
| if (status & PS2STAT_STP) | |
| writel_relaxed(PS2STAT_STP, ps2if->base + PS2STAT); | |
| flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | | |
| (status & PS2STAT_RXP ? 0 : SERIO_PARITY); | |
| scancode = readl_relaxed(ps2if->base + PS2DATA) & 0xff; | |
| if (hweight8(scancode) & 1) | |
| flag ^= SERIO_PARITY; | |
| serio_interrupt(ps2if->io, scancode, flag); | |
| status = readl_relaxed(ps2if->base + PS2STAT); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Completion of ps2 write | |
| */ | |
| static irqreturn_t ps2_txint(int irq, void *dev_id) | |
| { | |
| struct ps2if *ps2if = dev_id; | |
| unsigned int status; | |
| guard(spinlock)(&ps2if->lock); | |
| status = readl_relaxed(ps2if->base + PS2STAT); | |
| if (ps2if->head == ps2if->tail) { | |
| disable_irq_nosync(irq); | |
| /* done */ | |
| } else if (status & PS2STAT_TXE) { | |
| writel_relaxed(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); | |
| ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| /* | |
| * Write a byte to the PS2 port. We have to wait for the | |
| * port to indicate that the transmitter is empty. | |
| */ | |
| static int ps2_write(struct serio *io, unsigned char val) | |
| { | |
| struct ps2if *ps2if = io->port_data; | |
| unsigned int head; | |
| guard(spinlock_irqsave)(&ps2if->lock); | |
| /* | |
| * If the TX register is empty, we can go straight out. | |
| */ | |
| if (readl_relaxed(ps2if->base + PS2STAT) & PS2STAT_TXE) { | |
| writel_relaxed(val, ps2if->base + PS2DATA); | |
| } else { | |
| if (ps2if->head == ps2if->tail) | |
| enable_irq(ps2if->tx_irq); | |
| head = (ps2if->head + 1) & (sizeof(ps2if->buf) - 1); | |
| if (head != ps2if->tail) { | |
| ps2if->buf[ps2if->head] = val; | |
| ps2if->head = head; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int ps2_open(struct serio *io) | |
| { | |
| struct ps2if *ps2if = io->port_data; | |
| int ret; | |
| ret = sa1111_enable_device(ps2if->dev); | |
| if (ret) | |
| return ret; | |
| ret = request_irq(ps2if->rx_irq, ps2_rxint, 0, | |
| SA1111_DRIVER_NAME(ps2if->dev), ps2if); | |
| if (ret) { | |
| printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | |
| ps2if->rx_irq, ret); | |
| sa1111_disable_device(ps2if->dev); | |
| return ret; | |
| } | |
| ret = request_irq(ps2if->tx_irq, ps2_txint, 0, | |
| SA1111_DRIVER_NAME(ps2if->dev), ps2if); | |
| if (ret) { | |
| printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", | |
| ps2if->tx_irq, ret); | |
| free_irq(ps2if->rx_irq, ps2if); | |
| sa1111_disable_device(ps2if->dev); | |
| return ret; | |
| } | |
| ps2if->open = 1; | |
| enable_irq_wake(ps2if->rx_irq); | |
| writel_relaxed(PS2CR_ENA, ps2if->base + PS2CR); | |
| return 0; | |
| } | |
| static void ps2_close(struct serio *io) | |
| { | |
| struct ps2if *ps2if = io->port_data; | |
| writel_relaxed(0, ps2if->base + PS2CR); | |
| disable_irq_wake(ps2if->rx_irq); | |
| ps2if->open = 0; | |
| free_irq(ps2if->tx_irq, ps2if); | |
| free_irq(ps2if->rx_irq, ps2if); | |
| sa1111_disable_device(ps2if->dev); | |
| } | |
| /* | |
| * Clear the input buffer. | |
| */ | |
| static void ps2_clear_input(struct ps2if *ps2if) | |
| { | |
| int maxread = 100; | |
| while (maxread--) { | |
| if ((readl_relaxed(ps2if->base + PS2DATA) & 0xff) == 0xff) | |
| break; | |
| } | |
| } | |
| static unsigned int ps2_test_one(struct ps2if *ps2if, | |
| unsigned int mask) | |
| { | |
| unsigned int val; | |
| writel_relaxed(PS2CR_ENA | mask, ps2if->base + PS2CR); | |
| udelay(10); | |
| val = readl_relaxed(ps2if->base + PS2STAT); | |
| return val & (PS2STAT_KBC | PS2STAT_KBD); | |
| } | |
| /* | |
| * Test the keyboard interface. We basically check to make sure that | |
| * we can drive each line to the keyboard independently of each other. | |
| */ | |
| static int ps2_test(struct ps2if *ps2if) | |
| { | |
| unsigned int stat; | |
| int ret = 0; | |
| stat = ps2_test_one(ps2if, PS2CR_FKC); | |
| if (stat != PS2STAT_KBD) { | |
| printk("PS/2 interface test failed[1]: %02x\n", stat); | |
| ret = -ENODEV; | |
| } | |
| stat = ps2_test_one(ps2if, 0); | |
| if (stat != (PS2STAT_KBC | PS2STAT_KBD)) { | |
| printk("PS/2 interface test failed[2]: %02x\n", stat); | |
| ret = -ENODEV; | |
| } | |
| stat = ps2_test_one(ps2if, PS2CR_FKD); | |
| if (stat != PS2STAT_KBC) { | |
| printk("PS/2 interface test failed[3]: %02x\n", stat); | |
| ret = -ENODEV; | |
| } | |
| writel_relaxed(0, ps2if->base + PS2CR); | |
| return ret; | |
| } | |
| /* | |
| * Add one device to this driver. | |
| */ | |
| static int ps2_probe(struct sa1111_dev *dev) | |
| { | |
| struct ps2if *ps2if; | |
| struct serio *serio; | |
| int ret; | |
| ps2if = kzalloc_obj(*ps2if); | |
| serio = kzalloc_obj(*serio); | |
| if (!ps2if || !serio) { | |
| ret = -ENOMEM; | |
| goto free; | |
| } | |
| serio->id.type = SERIO_8042; | |
| serio->write = ps2_write; | |
| serio->open = ps2_open; | |
| serio->close = ps2_close; | |
| strscpy(serio->name, dev_name(&dev->dev), sizeof(serio->name)); | |
| strscpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys)); | |
| serio->port_data = ps2if; | |
| serio->dev.parent = &dev->dev; | |
| ps2if->io = serio; | |
| ps2if->dev = dev; | |
| sa1111_set_drvdata(dev, ps2if); | |
| spin_lock_init(&ps2if->lock); | |
| ps2if->rx_irq = sa1111_get_irq(dev, 0); | |
| if (ps2if->rx_irq <= 0) { | |
| ret = ps2if->rx_irq ? : -ENXIO; | |
| goto free; | |
| } | |
| ps2if->tx_irq = sa1111_get_irq(dev, 1); | |
| if (ps2if->tx_irq <= 0) { | |
| ret = ps2if->tx_irq ? : -ENXIO; | |
| goto free; | |
| } | |
| /* | |
| * Request the physical region for this PS2 port. | |
| */ | |
| if (!request_mem_region(dev->res.start, | |
| dev->res.end - dev->res.start + 1, | |
| SA1111_DRIVER_NAME(dev))) { | |
| ret = -EBUSY; | |
| goto free; | |
| } | |
| /* | |
| * Our parent device has already mapped the region. | |
| */ | |
| ps2if->base = dev->mapbase; | |
| sa1111_enable_device(ps2if->dev); | |
| /* Incoming clock is 8MHz */ | |
| writel_relaxed(0, ps2if->base + PS2CLKDIV); | |
| writel_relaxed(127, ps2if->base + PS2PRECNT); | |
| /* | |
| * Flush any pending input. | |
| */ | |
| ps2_clear_input(ps2if); | |
| /* | |
| * Test the keyboard interface. | |
| */ | |
| ret = ps2_test(ps2if); | |
| if (ret) | |
| goto out; | |
| /* | |
| * Flush any pending input. | |
| */ | |
| ps2_clear_input(ps2if); | |
| sa1111_disable_device(ps2if->dev); | |
| serio_register_port(ps2if->io); | |
| return 0; | |
| out: | |
| sa1111_disable_device(ps2if->dev); | |
| release_mem_region(dev->res.start, resource_size(&dev->res)); | |
| free: | |
| sa1111_set_drvdata(dev, NULL); | |
| kfree(ps2if); | |
| kfree(serio); | |
| return ret; | |
| } | |
| /* | |
| * Remove one device from this driver. | |
| */ | |
| static void ps2_remove(struct sa1111_dev *dev) | |
| { | |
| struct ps2if *ps2if = sa1111_get_drvdata(dev); | |
| serio_unregister_port(ps2if->io); | |
| release_mem_region(dev->res.start, resource_size(&dev->res)); | |
| sa1111_set_drvdata(dev, NULL); | |
| kfree(ps2if); | |
| } | |
| /* | |
| * Our device driver structure | |
| */ | |
| static struct sa1111_driver ps2_driver = { | |
| .drv = { | |
| .name = "sa1111-ps2", | |
| .owner = THIS_MODULE, | |
| }, | |
| .devid = SA1111_DEVID_PS2, | |
| .probe = ps2_probe, | |
| .remove = ps2_remove, | |
| }; | |
| static int __init ps2_init(void) | |
| { | |
| return sa1111_driver_register(&ps2_driver); | |
| } | |
| static void __exit ps2_exit(void) | |
| { | |
| sa1111_driver_unregister(&ps2_driver); | |
| } | |
| module_init(ps2_init); | |
| module_exit(ps2_exit); | |
| MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); | |
| MODULE_DESCRIPTION("SA1111 PS2 controller driver"); | |
| MODULE_LICENSE("GPL"); |