| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * HCI based Driver for Inside Secure microread NFC Chip - i2c layer | |
| * | |
| * Copyright (C) 2013 Intel Corporation. All rights reserved. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/i2c.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/nfc.h> | |
| #include <net/nfc/hci.h> | |
| #include <net/nfc/llc.h> | |
| #include "microread.h" | |
| #define MICROREAD_I2C_DRIVER_NAME "microread" | |
| #define MICROREAD_I2C_FRAME_HEADROOM 1 | |
| #define MICROREAD_I2C_FRAME_TAILROOM 1 | |
| /* framing in HCI mode */ | |
| #define MICROREAD_I2C_LLC_LEN 1 | |
| #define MICROREAD_I2C_LLC_CRC 1 | |
| #define MICROREAD_I2C_LLC_LEN_CRC (MICROREAD_I2C_LLC_LEN + \ | |
| MICROREAD_I2C_LLC_CRC) | |
| #define MICROREAD_I2C_LLC_MIN_SIZE (1 + MICROREAD_I2C_LLC_LEN_CRC) | |
| #define MICROREAD_I2C_LLC_MAX_PAYLOAD 29 | |
| #define MICROREAD_I2C_LLC_MAX_SIZE (MICROREAD_I2C_LLC_LEN_CRC + 1 + \ | |
| MICROREAD_I2C_LLC_MAX_PAYLOAD) | |
| struct microread_i2c_phy { | |
| struct i2c_client *i2c_dev; | |
| struct nfc_hci_dev *hdev; | |
| int hard_fault; /* | |
| * < 0 if hardware error occured (e.g. i2c err) | |
| * and prevents normal operation. | |
| */ | |
| }; | |
| #define I2C_DUMP_SKB(info, skb) \ | |
| do { \ | |
| pr_debug("%s:\n", info); \ | |
| print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \ | |
| 16, 1, (skb)->data, (skb)->len, 0); \ | |
| } while (0) | |
| static void microread_i2c_add_len_crc(struct sk_buff *skb) | |
| { | |
| int i; | |
| u8 crc = 0; | |
| int len; | |
| len = skb->len; | |
| *(u8 *)skb_push(skb, 1) = len; | |
| for (i = 0; i < skb->len; i++) | |
| crc = crc ^ skb->data[i]; | |
| skb_put_u8(skb, crc); | |
| } | |
| static void microread_i2c_remove_len_crc(struct sk_buff *skb) | |
| { | |
| skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM); | |
| skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM); | |
| } | |
| static int check_crc(const struct sk_buff *skb) | |
| { | |
| int i; | |
| u8 crc = 0; | |
| for (i = 0; i < skb->len - 1; i++) | |
| crc = crc ^ skb->data[i]; | |
| if (crc != skb->data[skb->len-1]) { | |
| pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]); | |
| pr_info("%s: BAD CRC\n", __func__); | |
| return -EPERM; | |
| } | |
| return 0; | |
| } | |
| static int microread_i2c_enable(void *phy_id) | |
| { | |
| return 0; | |
| } | |
| static void microread_i2c_disable(void *phy_id) | |
| { | |
| return; | |
| } | |
| static int microread_i2c_write(void *phy_id, struct sk_buff *skb) | |
| { | |
| int r; | |
| struct microread_i2c_phy *phy = phy_id; | |
| struct i2c_client *client = phy->i2c_dev; | |
| if (phy->hard_fault != 0) | |
| return phy->hard_fault; | |
| usleep_range(3000, 6000); | |
| microread_i2c_add_len_crc(skb); | |
| I2C_DUMP_SKB("i2c frame written", skb); | |
| r = i2c_master_send(client, skb->data, skb->len); | |
| if (r == -EREMOTEIO) { /* Retry, chip was in standby */ | |
| usleep_range(6000, 10000); | |
| r = i2c_master_send(client, skb->data, skb->len); | |
| } | |
| if (r >= 0) { | |
| if (r != skb->len) | |
| r = -EREMOTEIO; | |
| else | |
| r = 0; | |
| } | |
| microread_i2c_remove_len_crc(skb); | |
| return r; | |
| } | |
| static int microread_i2c_read(struct microread_i2c_phy *phy, | |
| struct sk_buff **skb) | |
| { | |
| int r; | |
| u8 len; | |
| u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1]; | |
| struct i2c_client *client = phy->i2c_dev; | |
| r = i2c_master_recv(client, &len, 1); | |
| if (r != 1) { | |
| nfc_err(&client->dev, "cannot read len byte\n"); | |
| return -EREMOTEIO; | |
| } | |
| if ((len < MICROREAD_I2C_LLC_MIN_SIZE) || | |
| (len > MICROREAD_I2C_LLC_MAX_SIZE)) { | |
| nfc_err(&client->dev, "invalid len byte\n"); | |
| r = -EBADMSG; | |
| goto flush; | |
| } | |
| *skb = alloc_skb(1 + len, GFP_KERNEL); | |
| if (*skb == NULL) { | |
| r = -ENOMEM; | |
| goto flush; | |
| } | |
| skb_put_u8(*skb, len); | |
| r = i2c_master_recv(client, skb_put(*skb, len), len); | |
| if (r != len) { | |
| kfree_skb(*skb); | |
| return -EREMOTEIO; | |
| } | |
| I2C_DUMP_SKB("cc frame read", *skb); | |
| r = check_crc(*skb); | |
| if (r != 0) { | |
| kfree_skb(*skb); | |
| r = -EBADMSG; | |
| goto flush; | |
| } | |
| skb_pull(*skb, 1); | |
| skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM); | |
| usleep_range(3000, 6000); | |
| return 0; | |
| flush: | |
| if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0) | |
| r = -EREMOTEIO; | |
| usleep_range(3000, 6000); | |
| return r; | |
| } | |
| static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id) | |
| { | |
| struct microread_i2c_phy *phy = phy_id; | |
| struct sk_buff *skb = NULL; | |
| int r; | |
| if (!phy || irq != phy->i2c_dev->irq) { | |
| WARN_ON_ONCE(1); | |
| return IRQ_NONE; | |
| } | |
| if (phy->hard_fault != 0) | |
| return IRQ_HANDLED; | |
| r = microread_i2c_read(phy, &skb); | |
| if (r == -EREMOTEIO) { | |
| phy->hard_fault = r; | |
| nfc_hci_recv_frame(phy->hdev, NULL); | |
| return IRQ_HANDLED; | |
| } else if ((r == -ENOMEM) || (r == -EBADMSG)) { | |
| return IRQ_HANDLED; | |
| } | |
| nfc_hci_recv_frame(phy->hdev, skb); | |
| return IRQ_HANDLED; | |
| } | |
| static const struct nfc_phy_ops i2c_phy_ops = { | |
| .write = microread_i2c_write, | |
| .enable = microread_i2c_enable, | |
| .disable = microread_i2c_disable, | |
| }; | |
| static int microread_i2c_probe(struct i2c_client *client) | |
| { | |
| struct microread_i2c_phy *phy; | |
| int r; | |
| phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy), | |
| GFP_KERNEL); | |
| if (!phy) | |
| return -ENOMEM; | |
| i2c_set_clientdata(client, phy); | |
| phy->i2c_dev = client; | |
| r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn, | |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, | |
| MICROREAD_I2C_DRIVER_NAME, phy); | |
| if (r) { | |
| nfc_err(&client->dev, "Unable to register IRQ handler\n"); | |
| return r; | |
| } | |
| r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME, | |
| MICROREAD_I2C_FRAME_HEADROOM, | |
| MICROREAD_I2C_FRAME_TAILROOM, | |
| MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev); | |
| if (r < 0) | |
| goto err_irq; | |
| return 0; | |
| err_irq: | |
| free_irq(client->irq, phy); | |
| return r; | |
| } | |
| static void microread_i2c_remove(struct i2c_client *client) | |
| { | |
| struct microread_i2c_phy *phy = i2c_get_clientdata(client); | |
| microread_remove(phy->hdev); | |
| free_irq(client->irq, phy); | |
| } | |
| static const struct i2c_device_id microread_i2c_id[] = { | |
| { .name = MICROREAD_I2C_DRIVER_NAME }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, microread_i2c_id); | |
| static struct i2c_driver microread_i2c_driver = { | |
| .driver = { | |
| .name = MICROREAD_I2C_DRIVER_NAME, | |
| }, | |
| .probe = microread_i2c_probe, | |
| .remove = microread_i2c_remove, | |
| .id_table = microread_i2c_id, | |
| }; | |
| module_i2c_driver(microread_i2c_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION(DRIVER_DESC); |