| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Compaq Hot Plug Controller Driver | |
| * | |
| * Copyright (C) 1995,2001 Compaq Computer Corporation | |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) | |
| * Copyright (C) 2001 IBM Corp. | |
| * | |
| * All rights reserved. | |
| * | |
| * Send feedback to <greg@kroah.com> | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/proc_fs.h> | |
| #include <linux/slab.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_hotplug.h> | |
| #include <linux/uaccess.h> | |
| #include "cpqphp.h" | |
| #include "cpqphp_nvram.h" | |
| #define ROM_INT15_PHY_ADDR 0x0FF859 | |
| #define READ_EV 0xD8A4 | |
| #define WRITE_EV 0xD8A5 | |
| struct register_foo { | |
| union { | |
| unsigned long lword; /* eax */ | |
| unsigned short word; /* ax */ | |
| struct { | |
| unsigned char low; /* al */ | |
| unsigned char high; /* ah */ | |
| } byte; | |
| } data; | |
| unsigned char opcode; /* see below */ | |
| unsigned long length; /* if the reg. is a pointer, how much data */ | |
| } __attribute__ ((packed)); | |
| struct all_reg { | |
| struct register_foo eax_reg; | |
| struct register_foo ebx_reg; | |
| struct register_foo ecx_reg; | |
| struct register_foo edx_reg; | |
| struct register_foo edi_reg; | |
| struct register_foo esi_reg; | |
| struct register_foo eflags_reg; | |
| } __attribute__ ((packed)); | |
| struct ev_hrt_header { | |
| u8 Version; | |
| u8 num_of_ctrl; | |
| u8 next; | |
| }; | |
| struct ev_hrt_ctrl { | |
| u8 bus; | |
| u8 device; | |
| u8 function; | |
| u8 mem_avail; | |
| u8 p_mem_avail; | |
| u8 io_avail; | |
| u8 bus_avail; | |
| u8 next; | |
| }; | |
| static u8 evbuffer_init; | |
| static u8 evbuffer_length; | |
| static u8 evbuffer[1024]; | |
| static void __iomem *compaq_int15_entry_point; | |
| /* lock for ordering int15_bios_call() */ | |
| static DEFINE_SPINLOCK(int15_lock); | |
| /* This is a series of function that deals with | |
| * setting & getting the hotplug resource table in some environment variable. | |
| */ | |
| /* | |
| * We really shouldn't be doing this unless there is a _very_ good reason to!!! | |
| * greg k-h | |
| */ | |
| static u32 add_byte(u32 **p_buffer, u8 value, u32 *used, u32 *avail) | |
| { | |
| u8 **tByte; | |
| if ((*used + 1) > *avail) | |
| return(1); | |
| *((u8 *)*p_buffer) = value; | |
| tByte = (u8 **)p_buffer; | |
| (*tByte)++; | |
| *used += 1; | |
| return(0); | |
| } | |
| static u32 add_dword(u32 **p_buffer, u32 value, u32 *used, u32 *avail) | |
| { | |
| if ((*used + 4) > *avail) | |
| return(1); | |
| **p_buffer = value; | |
| (*p_buffer)++; | |
| *used += 4; | |
| return(0); | |
| } | |
| /* | |
| * check_for_compaq_ROM | |
| * | |
| * this routine verifies that the ROM OEM string is 'COMPAQ' | |
| * | |
| * returns 0 for non-Compaq ROM, 1 for Compaq ROM | |
| */ | |
| static int check_for_compaq_ROM(void __iomem *rom_start) | |
| { | |
| u8 temp1, temp2, temp3, temp4, temp5, temp6; | |
| int result = 0; | |
| temp1 = readb(rom_start + 0xffea + 0); | |
| temp2 = readb(rom_start + 0xffea + 1); | |
| temp3 = readb(rom_start + 0xffea + 2); | |
| temp4 = readb(rom_start + 0xffea + 3); | |
| temp5 = readb(rom_start + 0xffea + 4); | |
| temp6 = readb(rom_start + 0xffea + 5); | |
| if ((temp1 == 'C') && | |
| (temp2 == 'O') && | |
| (temp3 == 'M') && | |
| (temp4 == 'P') && | |
| (temp5 == 'A') && | |
| (temp6 == 'Q')) { | |
| result = 1; | |
| } | |
| dbg("%s - returned %d\n", __func__, result); | |
| return result; | |
| } | |
| static u32 access_EV(u16 operation, u8 *ev_name, u8 *buffer, u32 *buf_size) | |
| { | |
| unsigned long flags; | |
| int op = operation; | |
| int ret_val; | |
| if (!compaq_int15_entry_point) | |
| return -ENODEV; | |
| spin_lock_irqsave(&int15_lock, flags); | |
| __asm__ ( | |
| "xorl %%ebx,%%ebx\n" \ | |
| "xorl %%edx,%%edx\n" \ | |
| "pushf\n" \ | |
| "push %%cs\n" \ | |
| "cli\n" \ | |
| "call *%6\n" | |
| : "=c" (*buf_size), "=a" (ret_val) | |
| : "a" (op), "c" (*buf_size), "S" (ev_name), | |
| "D" (buffer), "m" (compaq_int15_entry_point) | |
| : "%ebx", "%edx"); | |
| spin_unlock_irqrestore(&int15_lock, flags); | |
| return((ret_val & 0xFF00) >> 8); | |
| } | |
| /* | |
| * load_HRT | |
| * | |
| * Read the hot plug Resource Table from NVRAM | |
| */ | |
| static int load_HRT(void __iomem *rom_start) | |
| { | |
| u32 available; | |
| u32 temp_dword; | |
| u8 temp_byte = 0xFF; | |
| u32 rc; | |
| if (!check_for_compaq_ROM(rom_start)) | |
| return -ENODEV; | |
| available = 1024; | |
| /* Now load the EV */ | |
| temp_dword = available; | |
| rc = access_EV(READ_EV, "CQTHPS", evbuffer, &temp_dword); | |
| evbuffer_length = temp_dword; | |
| /* We're maintaining the resource lists so write FF to invalidate old | |
| * info | |
| */ | |
| temp_dword = 1; | |
| rc = access_EV(WRITE_EV, "CQTHPS", &temp_byte, &temp_dword); | |
| return rc; | |
| } | |
| /* | |
| * store_HRT | |
| * | |
| * Save the hot plug Resource Table in NVRAM | |
| */ | |
| static u32 store_HRT(void __iomem *rom_start) | |
| { | |
| u32 *buffer; | |
| u32 *pFill; | |
| u32 usedbytes; | |
| u32 available; | |
| u32 temp_dword; | |
| u32 rc; | |
| u8 loop; | |
| u8 numCtrl = 0; | |
| struct controller *ctrl; | |
| struct pci_resource *resNode; | |
| struct ev_hrt_header *p_EV_header; | |
| struct ev_hrt_ctrl *p_ev_ctrl; | |
| available = 1024; | |
| if (!check_for_compaq_ROM(rom_start)) | |
| return(1); | |
| buffer = (u32 *) evbuffer; | |
| if (!buffer) | |
| return(1); | |
| pFill = buffer; | |
| usedbytes = 0; | |
| p_EV_header = (struct ev_hrt_header *) pFill; | |
| ctrl = cpqhp_ctrl_list; | |
| /* The revision of this structure */ | |
| rc = add_byte(&pFill, 1 + ctrl->push_flag, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* The number of controllers */ | |
| rc = add_byte(&pFill, 1, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| while (ctrl) { | |
| p_ev_ctrl = (struct ev_hrt_ctrl *) pFill; | |
| numCtrl++; | |
| /* The bus number */ | |
| rc = add_byte(&pFill, ctrl->bus, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* The device Number */ | |
| rc = add_byte(&pFill, PCI_SLOT(ctrl->pci_dev->devfn), &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* The function Number */ | |
| rc = add_byte(&pFill, PCI_FUNC(ctrl->pci_dev->devfn), &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* Skip the number of available entries */ | |
| rc = add_dword(&pFill, 0, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* Figure out memory Available */ | |
| resNode = ctrl->mem_head; | |
| loop = 0; | |
| while (resNode) { | |
| loop++; | |
| /* base */ | |
| rc = add_dword(&pFill, resNode->base, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* length */ | |
| rc = add_dword(&pFill, resNode->length, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| resNode = resNode->next; | |
| } | |
| /* Fill in the number of entries */ | |
| p_ev_ctrl->mem_avail = loop; | |
| /* Figure out prefetchable memory Available */ | |
| resNode = ctrl->p_mem_head; | |
| loop = 0; | |
| while (resNode) { | |
| loop++; | |
| /* base */ | |
| rc = add_dword(&pFill, resNode->base, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* length */ | |
| rc = add_dword(&pFill, resNode->length, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| resNode = resNode->next; | |
| } | |
| /* Fill in the number of entries */ | |
| p_ev_ctrl->p_mem_avail = loop; | |
| /* Figure out IO Available */ | |
| resNode = ctrl->io_head; | |
| loop = 0; | |
| while (resNode) { | |
| loop++; | |
| /* base */ | |
| rc = add_dword(&pFill, resNode->base, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* length */ | |
| rc = add_dword(&pFill, resNode->length, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| resNode = resNode->next; | |
| } | |
| /* Fill in the number of entries */ | |
| p_ev_ctrl->io_avail = loop; | |
| /* Figure out bus Available */ | |
| resNode = ctrl->bus_head; | |
| loop = 0; | |
| while (resNode) { | |
| loop++; | |
| /* base */ | |
| rc = add_dword(&pFill, resNode->base, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| /* length */ | |
| rc = add_dword(&pFill, resNode->length, &usedbytes, &available); | |
| if (rc) | |
| return(rc); | |
| resNode = resNode->next; | |
| } | |
| /* Fill in the number of entries */ | |
| p_ev_ctrl->bus_avail = loop; | |
| ctrl = ctrl->next; | |
| } | |
| p_EV_header->num_of_ctrl = numCtrl; | |
| /* Now store the EV */ | |
| temp_dword = usedbytes; | |
| rc = access_EV(WRITE_EV, "CQTHPS", (u8 *) buffer, &temp_dword); | |
| dbg("usedbytes = 0x%x, length = 0x%x\n", usedbytes, temp_dword); | |
| evbuffer_length = temp_dword; | |
| if (rc) { | |
| err(msg_unable_to_save); | |
| return(1); | |
| } | |
| return(0); | |
| } | |
| void compaq_nvram_init(void __iomem *rom_start) | |
| { | |
| if (rom_start) | |
| compaq_int15_entry_point = (rom_start + ROM_INT15_PHY_ADDR - ROM_PHY_ADDR); | |
| dbg("int15 entry = %p\n", compaq_int15_entry_point); | |
| } | |
| int compaq_nvram_load(void __iomem *rom_start, struct controller *ctrl) | |
| { | |
| u8 bus, device, function; | |
| u8 nummem, numpmem, numio, numbus; | |
| u32 rc; | |
| u8 *p_byte; | |
| struct pci_resource *mem_node; | |
| struct pci_resource *p_mem_node; | |
| struct pci_resource *io_node; | |
| struct pci_resource *bus_node; | |
| struct ev_hrt_ctrl *p_ev_ctrl; | |
| struct ev_hrt_header *p_EV_header; | |
| if (!evbuffer_init) { | |
| /* Read the resource list information in from NVRAM */ | |
| if (load_HRT(rom_start)) | |
| memset(evbuffer, 0, 1024); | |
| evbuffer_init = 1; | |
| } | |
| /* If we saved information in NVRAM, use it now */ | |
| p_EV_header = (struct ev_hrt_header *) evbuffer; | |
| /* The following code is for systems where version 1.0 of this | |
| * driver has been loaded, but doesn't support the hardware. | |
| * In that case, the driver would incorrectly store something | |
| * in NVRAM. | |
| */ | |
| if ((p_EV_header->Version == 2) || | |
| ((p_EV_header->Version == 1) && !ctrl->push_flag)) { | |
| p_byte = &(p_EV_header->next); | |
| p_ev_ctrl = (struct ev_hrt_ctrl *) &(p_EV_header->next); | |
| p_byte += 3; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) | |
| return 2; | |
| bus = p_ev_ctrl->bus; | |
| device = p_ev_ctrl->device; | |
| function = p_ev_ctrl->function; | |
| while ((bus != ctrl->bus) || | |
| (device != PCI_SLOT(ctrl->pci_dev->devfn)) || | |
| (function != PCI_FUNC(ctrl->pci_dev->devfn))) { | |
| nummem = p_ev_ctrl->mem_avail; | |
| numpmem = p_ev_ctrl->p_mem_avail; | |
| numio = p_ev_ctrl->io_avail; | |
| numbus = p_ev_ctrl->bus_avail; | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) | |
| return 2; | |
| /* Skip forward to the next entry */ | |
| p_byte += (nummem + numpmem + numio + numbus) * 8; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) | |
| return 2; | |
| p_ev_ctrl = (struct ev_hrt_ctrl *) p_byte; | |
| p_byte += 3; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) | |
| return 2; | |
| bus = p_ev_ctrl->bus; | |
| device = p_ev_ctrl->device; | |
| function = p_ev_ctrl->function; | |
| } | |
| nummem = p_ev_ctrl->mem_avail; | |
| numpmem = p_ev_ctrl->p_mem_avail; | |
| numio = p_ev_ctrl->io_avail; | |
| numbus = p_ev_ctrl->bus_avail; | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) | |
| return 2; | |
| while (nummem--) { | |
| mem_node = kmalloc_obj(struct pci_resource); | |
| if (!mem_node) | |
| break; | |
| mem_node->base = *(u32 *)p_byte; | |
| dbg("mem base = %8.8x\n", mem_node->base); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(mem_node); | |
| return 2; | |
| } | |
| mem_node->length = *(u32 *)p_byte; | |
| dbg("mem length = %8.8x\n", mem_node->length); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(mem_node); | |
| return 2; | |
| } | |
| mem_node->next = ctrl->mem_head; | |
| ctrl->mem_head = mem_node; | |
| } | |
| while (numpmem--) { | |
| p_mem_node = kmalloc_obj(struct pci_resource); | |
| if (!p_mem_node) | |
| break; | |
| p_mem_node->base = *(u32 *)p_byte; | |
| dbg("pre-mem base = %8.8x\n", p_mem_node->base); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(p_mem_node); | |
| return 2; | |
| } | |
| p_mem_node->length = *(u32 *)p_byte; | |
| dbg("pre-mem length = %8.8x\n", p_mem_node->length); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(p_mem_node); | |
| return 2; | |
| } | |
| p_mem_node->next = ctrl->p_mem_head; | |
| ctrl->p_mem_head = p_mem_node; | |
| } | |
| while (numio--) { | |
| io_node = kmalloc_obj(struct pci_resource); | |
| if (!io_node) | |
| break; | |
| io_node->base = *(u32 *)p_byte; | |
| dbg("io base = %8.8x\n", io_node->base); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(io_node); | |
| return 2; | |
| } | |
| io_node->length = *(u32 *)p_byte; | |
| dbg("io length = %8.8x\n", io_node->length); | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(io_node); | |
| return 2; | |
| } | |
| io_node->next = ctrl->io_head; | |
| ctrl->io_head = io_node; | |
| } | |
| while (numbus--) { | |
| bus_node = kmalloc_obj(struct pci_resource); | |
| if (!bus_node) | |
| break; | |
| bus_node->base = *(u32 *)p_byte; | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(bus_node); | |
| return 2; | |
| } | |
| bus_node->length = *(u32 *)p_byte; | |
| p_byte += 4; | |
| if (p_byte > ((u8 *)p_EV_header + evbuffer_length)) { | |
| kfree(bus_node); | |
| return 2; | |
| } | |
| bus_node->next = ctrl->bus_head; | |
| ctrl->bus_head = bus_node; | |
| } | |
| /* If all of the following fail, we don't have any resources for | |
| * hot plug add | |
| */ | |
| rc = 1; | |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->mem_head)); | |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->p_mem_head)); | |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->io_head)); | |
| rc &= cpqhp_resource_sort_and_combine(&(ctrl->bus_head)); | |
| if (rc) | |
| return(rc); | |
| } else { | |
| if ((evbuffer[0] != 0) && (!ctrl->push_flag)) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| int compaq_nvram_store(void __iomem *rom_start) | |
| { | |
| int rc = 1; | |
| if (rom_start == NULL) | |
| return -ENODEV; | |
| if (evbuffer_init) { | |
| rc = store_HRT(rom_start); | |
| if (rc) | |
| err(msg_unable_to_save); | |
| } | |
| return rc; | |
| } | |